Updated to Mavericks now my Toshiba External HDD 3.0 won't mount need help what to do

I recently updated to mavericks now my toshiba external hard drive wont connect and i have some important data need help to get drivers im assuming its the drivers but need help to locate the drivers

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

Similar Messages

External HDD recognised but won't mount/unmount

I have a 300GB Maxtor HDD in an Icy Box enclosure which I have been using with my PC for over a year now and my Macbook for the last few months.
Lately, I have been having some really annoying issues with it. In short, the drive won't appear to mount (ie it won't show up in the sidebar in Finder or on my desktop) but seemingly it has according to Disk Utility. The drive appears in the sidebar with a 'no entry' sign on it. Trying to verify or repair it in DU results in an error message saying that the drive cannot unmount. Restarting solves nothing. The only way I have found to resolve the issue is to plug it into my PC, fire it up and then disconnect it before using it again on my Mac. This is far from ideal.
I recently installed VMWare Fusion which definitely caused this problem the first time. I shut down Fusion without 'safely disconnecting' the drive from XP and then disconnecting it from Fusion first. I understand that it may be that Fusion is still accessing a file on the drive preventing it from unmounting but I would have thought that a restart would resolve that issue - it doesn't.
I know about the 'lsof' function in Terminal but I do not know what to do after I get the results from it.
Any help would be greatly appreciated. Thanks.

looks like your in trouble with that drive, I assume its a 1TB HD?
It shows on your pic 1TB available, .......bad news,.... run Etrecheck to verify you dont have WD software on your Mac
https://www.macupdate.com/app/mac/48217/etrecheck
EtreCheck is a simple little app to display the important details of your system configuration and allow you to copy that information to the Clipboard. It is meant to be used with Apple Support Communities to help people help you with your Mac. EtreCheck automatically removes any personally identifiable information from the output.
WD software is known to, on its own accord, repartition and corrupt drives under Mavericks, ...WD has confessed to their erorr in all this.

External HDD Fine, But won't MOUNT.

Hi, I have been having this problem as of today. The drive appears in Disk Utility, everything seems to be fine, Verify and Repair turn out OK. But wont mount... Any suggestions? I really dont want to partition or format before maybe saving files first.
Have tried to mount on different enclosures, USB and Firewire.
Thanks!

looks like your in trouble with that drive, I assume its a 1TB HD?
It shows on your pic 1TB available, .......bad news,.... run Etrecheck to verify you dont have WD software on your Mac
https://www.macupdate.com/app/mac/48217/etrecheck
EtreCheck is a simple little app to display the important details of your system configuration and allow you to copy that information to the Clipboard. It is meant to be used with Apple Support Communities to help people help you with your Mac. EtreCheck automatically removes any personally identifiable information from the output.
WD software is known to, on its own accord, repartition and corrupt drives under Mavericks, ...WD has confessed to their erorr in all this.

Updated to mavericks, now windows 7 partition freezes on boot

i have a late 2012 macbook pro, just updated to mavericks, now w7 64bit boot freezes on grey load screen. tried SMC/PR resets, just got off the phone with support and they don't have a clue on what to do to resolve the issue other than a reinstall (if my only option is reinstall I might abandon bootcamp and try another option). any advice?

Hello,
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Software update to Mavericks, now 'movable frame' appears on screen. Anyone know how to remove it as I have no idea?

Software update to Mavericks, now 'movable frame' appears on screen. Anyone know how to remove it as I have no idea?
iMac, Early 2009. Processor 2.93 GHz Intel Core 2 Duo. Memory 4 GB 1067 MHz DDR3

From the menu bar, select
 ▹ System Preferences... ▹ Accessibility ▹ Zoom ▹ Zoom Style: Fullscreen

Re: Satellite L550-129 doens't support Toshiba external HDD

Toshiba Satellite L550-129 doens't support Toshiba external hdd store.e canvio.
Al other thosiba laptops in the familie work with the store.e canvio and a lot of older coputers?????

If your external HDD is not recognized, then this can be caused by low power supply from USB port or its simply an software issue.
The Toshiba page http://www.toshiba-multimedia.com/chd/store-externe-festplatten/canvio/ says that STOR.E CANVIO needs 900mA
The usual USB 2.0 standard provides 500mA
So you need an USB Y cable to connect such HDD to two USB 2.0 ports

I bought a iPhone and I was able to log into my iCloud with no problem and when I tried to update it it kicked me out and now it's asking me for the old apple user please help what can I do...?

I bought a iPhone and I was able to log into my iCloud with no problem and when I tried to update it it kicked me out and now it's asking me for the old apple user please help what can I do...?

Contact the original owner, and ask them to remove the device from their icloud.
http://support.apple.com/kb/PH13695
HTH

I tried updating my iphone 4 to ios 5.01 and then chnged my mind and tried to turn it off halfway the updating process.. now i can't turn it on... PLEASE HELP! :(

i tried updating my iphone 4 to ios 5.01 and then chnged my mind and tried to turn it off halfway the updating process.. now i can't turn it on... PLEASE HELP!

Hi jonnarink,
Try this:
http://support.apple.com/kb/ht1808
In short:
1) Make sure the iPhone is not connected to USB and, if it is on, turn it off by holding the power button and the home button together(takes about 6 seconds)
2) Once it's completely off, hold down the home button
3) While holding home, connect the USB cable and keep holding home until iTunes recognises the iPhone
It will force the iPhone into recovery mode, then you can connect to iTunes and restore your backup. Bear in mind that it will likely need to be updated to 5.0.1 anyway.
:edit:
Sorry, just saw Ralph Landry1's post above mine(typed mine a while ago, only posted now!) with the same link

I can't download apps, or update to mavericks in the App Store. It just keep, "loading" doesn't matter what wifi I'm on...

I can't download apps, or update to mavericks in the App Store. It just keep, "loading" doesn't matter what wifi I'm on...

It's hard to tell what's wrong with your Apple ID. Maybe the country you have registered is different from what your friend have registered. Apps are available differently in different areas. That's what I see.

While updating Apple TV now unit is locked up. Tried resetting with remote no help. Connected to iTunes Apple TV comes up to reset but when you hit reset fails and said it can't find any apple tv

While updating Apple TV now unit is locked up. Tried resetting with remote no help. Connected to iTunes Apple TV comes up to reset but when you hit reset fails and said it can't find any apple tv

Dear Brian:
Create a Play List in iTunes.
Control-Click and open "Export" in the highlighted Playlist in iTunes.
With "Export" opened:
1. Click on "Format" and choose "M3U";
2. In "Save As" name your "WhatEverNamePlaylist.m3u"; and
3. In "Where" tell the program where to send your "WhatEverNamePlaylist.m3u".
You are done creating the Playlist.m3u in iTunes.
Open "Subsonic Web Page".
Left hand column open "Import playlist".
In "Import playlist" click "Choose File" and open the "WhatEverNamePlaylist.m3u"; you created in iTunes.
The "WhatEverNamePlaylist.m3u" should now occupy the space between "Choose File" and "OK".
Click "OK".
The file should now be in the "Playlist" on the left.

Ever since I updating Safari to 7.0.3 I cannot open any youtube videos. Need help please

Ever since I updating Safari to 7.0.3 I cannot open any youtube videos. Need help please

Go step by step and test.
1. System Preferences > Other/ Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Follow the prompts. Click Safari in the menu bar and then Quit Safari .
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Press " Manage Website Settings" button for more options.
    Adobe Flash Player
    Currently open website:
    All other websites"
    Select "Allow" then "Done".
3. Delete cookies.
     Safari > Preferences > Privacy > Cookies and other website data:
     Press the “Remove All Website Data” button. It may take a while.
4. Turn off Extensions, if any.
    Safari > Preferences > Extensions
     Now try YouTube.
Best.

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1and it was not jillbreak or hacked to unlock. I need help, what can I do?

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1
my phone was not jillbreak or hacked to unlock. i need help, what can I do?

Did you do the Reset Network Settings as I described above?
There is no way to go back. You can try reseating your nanoSIM or replacing it. Or call your cell provider and have them check the provisioning on your phone.
Or Restore your iPhone from your backup in iTunes.

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1 i need help, what can I do?

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !!
It was working fine on ios 8.1.1 i need help, what can I do?

I have this problem too - and it is on a BRAND new iPhone 6 - I have definitively tracked the issue to the moment I upgraded to iOS 8.1.2 - and am beyond frustrated. No fix to tell you about, sorry…but you can read my post here if you are into the whole "misery loves company" thing: iOS 8.1.2 Cellular data problem (Definitive - maybe)

Updated to Mavericks, now having Outlook 2011 issues.

Okay this is probably a simple fix, but I can't seem to figure it out. I just updated to OS X Mavericks, now when my display on my MacBook Pro goes to sleep, and I have Outlook 2011 running (I have it set up on a schedule to send/receive emails) I get 2 different messages when the schedule runs and the display is asleep.
"Connection to the server failed or was dropped" and "Inactivity timeout".
If I hit the send/receive after the display wakes up.. no problem, it gets the mail. Display asleep and the schedule runs, I get the errors above.
I updated the Office 2011 service pack, and all updates to see if that helped, it didin't.
Everything was working fine with OS X Mountain Lion, as soon as I updated to Mavericks this all started. Anyone have a fix for this? Or is it something I have to live with. I tried an experiment and the native Mail program works fine when the display is asleep.

See thread https://discussions.apple.com/message/23616795#23616795
I'm having intermittent issues with Outlook 2011 Office Mac and Mavericks with POP and IMAP access...
Similar to the ones described here.
Quite a discussion over on the microsoft forum for Office Mac here:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook/outlook-ma c-2011-yahoo-pop-emails-keep-downloading/69472682-6555-404e-b557-77fc308d6238
This is causing me a lot of grief as I rely on these emails for time cticial notifications in my business....

Updated to Maverick, now all my projects in FCP have a green Canvas... help

I updated to Maverick and opened up FCP and all the projects I was working on now have a green canvas. the audio still works. I then reinstalled FCP 7 ut still the same problems. Help please

You're in the FCP X forum. You should post your question here. https://discussions.apple.com/community/professional_applications/final_cut_stud io
Russ

Updated to Mavericks now my Toshiba External HDD 3.0 won't mount need help what to do

Similar Messages

Maybe you are looking for