Updated to new itunes software and now it won't stop auto-restarting

Ok, I thought that the problems with version10 software had been fixed, so I went ahead and allowed it to upgrade itself to version 10.5.2.11, Windows7 64-bit version.  And, unfortunately, I see that the problems with version10 have not been resolved. 
My particular problem is that the itunes constant auto-starts.  With or without my device connected.  The software on my PC just starts up.  If I don't use it at all from when my computer first boots up, then it stays quiet.  But once it has been ran by actually running the program or plugging in a device, you cannot get rid of it.  If you exit the software, it just starts up again a couple seconds later.  You literally have to go into the task manager and shut down the process tree to get it to stop. 
I have done a full reset on my iPod, before I realized it would do it without any device connected.
I repaired the iTunes installation.
I removed & reinstalled the iTunes installation.
Nothing makes any difference at all.  No settings, nothing. 
Any suggestions or does a fix already exist for this?
thanks

Only thing i suggest as i had similar issues is to restore the phone! using itunes and then continue as a new install and not as a back from..
Or forget the network and search again!

Similar Messages

  • I uploded the new itunes software and now my ipod touch is not getting reconized in my itunes. I went through all the trouble shooting support from apple. But I do have a avast antivirus on my computer i wonder if that is what is holding it up

    I uploded the new itunes software and now my ipod touch is not getting reconized in my itunes. I went through all the trouble shooting support from apple. But I do have a avast antivirus on my computer i wonder if that is what is holding it up

    Could be since it (security software) is listed as #5 in the following:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • I updated my iPod/iTunes software and now I can't get it to shuffle songs in a playlist; it either shuffles albums in a playlist or songs on the whole iPod

    I updated my iPod/iTunes software and now I can't get it to shuffle songs in a playlist; it either shuffles albums in a playlist or songs on the whole iPod, neither of which is what I want to do.  How do I get it to shuffle songs in just one playlist?

    The shuffle setting in the main menu will shuffle through the entire library as you have found out.
    You need to go to settings>shuffle this will toggle through off/song/album. Once you have set this it will stay the same until you change the setting.
    Now when you start playing a song in a playlist the iPod will shuffle through that playlist (or if you select your song through artist then it will shuffle through all the songs for that artist etc)

  • Updated to new iTunes 11 and now it says my iCloud session has expired and i can't log back in!

    Updated to new iTunes 11 and now it says my iCloud seesion has expired and i can't log back in! 
    I restarted the program and I even reset my password to no avail
    This is the kind of error messages i use to get with MS DOS/Windows - stop it your scaring me!
    What do i do to regain my iTunes account ?

    Just download and install version 4.1 - problem solved.
    https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=D TEML

  • I updated my iPhone 5 software and now it won't stay connected to wi-fi

    I updated my iPhone 5 software and now it won't stay connected to wi-fi

    Icloud uses you Apple ID. It one of the Key feature on the new ATV. Restart the ATV, if that doesn't work unplug it and restart it. It should resolve the issue

  • HT202157 I updated my Apple TV software and now it won't recognise any of my devices?

    When I try to connect to my iphone or macbook it says I need to sign up for iCloud? Am I overlooking something?

    Icloud uses you Apple ID. It one of the Key feature on the new ATV. Restart the ATV, if that doesn't work unplug it and restart it. It should resolve the issue

  • I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there.  I've uninstalled iTunes and reinstalled twice and it's not working.  Please help.

    I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there.  I've uninstalled iTunes and reinstalled twice and it's not working.  Please help.

    I have not had wifi since November when I upgraded to the newest IOS version.  I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again.  I kept doing what they told me and it worked for a couple more days and then I could never turn it on again.  My blue tooth doesn't work either.  I had to actually increase my data usage with AT&T becuase of this.  When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue.  My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!!  I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue.  Who knows how many people out there have had this issue and have not said anything about it.  Now there is a newer update that I can't do because it requires wifi in order to download.
    June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

  • I updated my iTunes Software and now I cant burn CD's anymore.

    I need help. I updated my iTunes Software and now I get this:
    "The Registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes"
    Disc Burner: No Disc Recording software found.
    I just reinstalled iTunes when they changed the entire format about a month ago. And I have had Nero for my burning CDs/DVDs for years.
    Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
    Dell Inc. Inspiron 1525
    iTunes 11.0.1.12
    QuickTime 7.7.3
    FairPlay 2.2.32
    Apple Application Support 2.3.2
    iPod Updater Library 10.0d2
    VoiceOver Kit 1.4.2 (222093/222742)
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.1.3
    Apple Mobile Device Driver 1.63.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 002ABA4808C3E488
    Current user is not an administrator.
    The current local date and time is 2012-12-26 21:12:26.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.0.1.12 is currently running.
    iTunesHelper 11.0.1.12 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    LowerFilters: PxHelp20 (2.0.0.0),
    No drivers in UpperFilters.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: PBDS DVD+-RW DS-8W1P on CDR media at speed 16X.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: PBDS DVD+-RW DS-8W1P on CDR media at speed 16X.

    Solving MSVCR80 issue and Windows iTunes install issues.
    Thanks to user turingtest2 for this solution.
    Solving MSVCR80 issue and Windows iTunes install issues.
    If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    You may be required to boot into safe mode to complete the folder deletion process.

  • I updated to a newer itunes version and now itunes will not let me play a bunch of my music.  ***? anyone know what the deal is with that?

    I  updated to a newer itunes version and now itunes will not let me play a bunch of my music.  ***? anyone know what the deal is with that?

    How could anyone possibly know as you've provided no details.
    What happens when trying to play the media in question?
    Any errors?
    Is there an ! to the left of the media?  If so, this means iTunes is unable to locate the media file.

  • I downloaded the new itunes version and now i can't get itunes to pop up. all i get is error 6034

    i downloaded the new itunes version and now i can't get itunes to pop up. all i get is error 6034

    Hello CHENSLER68,
    Thank you for the details of the issue you are experiencing with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step. 
    You can find the full article here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I just downloaded the new version of iTunes 10 and now it won't let me drag and drop any files from my computer.

    I just downloaded the new version of iTunes 10 and now it won't let me drag and drop any files from my computer into my iTunes. It lets me play the song from the folder in my computer and then it opens with iTunes and plays the song all the way through, but then if I try to play it again, it says the file cannot be located. So then I go to locate and go to the folder and all that and select it and nothing happens.

    Not sure whether for instance you initially had a Yahoo optimised version of Firefox, and have now overwritten it with an official Mozilla version. Although the Mozilla version should NOT add unwanted features, but the Yahoo version may well do.
    If you merely need to find the Yahoo emails page quickly just add it as a bookmark or as a bookmark on the Bookmarks toolbar and make sure that is visible.
    Clicking the star icon on the location bar whilst looking at your emails will bookmark the page.
    * [[How to use bookmarks to save and organize your favorite websites]]
    * [[Bookmarks Toolbar - Display your favorite websites at the top of the Firefox window]]
    I do not use Yahoo myself,and am not sure what add-ons are available. You could search yourself using
    * FirefoxButton -> add-ons
    ** see [[Find and install add-ons to add features to Firefox]]
    ** examples [https://addons.mozilla.org/en-us/firefox/addon/yahoo-toolbar/ yahoo toolbar] & [https://addons.mozilla.org/en-us/firefox/addon/yahoo-mail-notifier/ mail notifier]
    * also look at Yahoo's own information such as http://help.yahoo.com/tutorials/toolbar/cl3/c3_ff_toolbar1.html

  • I updated to the iTunes 11 and now it is telling me my iTunes is not installed correctly...

    I updated to the iTunes 11 and now it is telling me my iTunes is not installed correctly. I have tried to reinstall with no success. Help?

    It did this to me too. I just went to Apple's website where you can download Itunes for free, and hit download again. It will ask you if you want to replace or fix the current version you have. Click yes and it will re-download and should work

  • I generated a new Itunes Account and now the App sync. does not work with theapps I bought with the old account. Is it possible to merge the old and the new account ?

    I generated a new Itunes Account and now the App sync. does not work with the apps I bought with the old account. Is it possible to merge the old and the new account ?

    It is not possible to merge Apple IDs. 
    Why did you create a new one?

  • Downloaded the new Lion software and now Mac runs slow.  What went wrong?

    I downloaded the new Lion software and now my Mac runs slow.  What did I do wrong?

    That didn' t fix it for me. and I also repaired and verified disk permissions that didn't help. So how do I do the next steps? Can you lay it out slowly for me please?
    if that doesn't fix your slow down open disk utilities
    -repair and varify disk permissions
    -reboot and hold comman-R
    -open disk utilities once your on your recovery partition
    -repair disk and verify disk
    -reboot and you imac should be running at tip top shape
    if that doesn't fix your slow down open disk utilities
    -repair and varify disk permissions
    -reboot and hold comman-R
    -open disk utilities once your on your recovery partition
    -repair disk and verify disk
    -reboot and you imac should be running at tip top shape

  • Please HELP! I updated to Lightroom 5.7, and now it won't open!!!

    Please HELP! I updated to Lightroom 5.7, and now it won't open! I have Windows 7. What can I do to fix this ASAP?!?! I was working on an important project that I need to finish pronto for possible publication!!! Can anyone help me out??? Thanks soooo much!

    deepakgahlot wrote:
    Hi
    1. Go to the “Preferences” folder (Win: C:\Users\Name\AppData\Roaming\Adobe\Lightroom\Preferences
    2. Delete “Lightroom 5 Preferences.agprefs” should it be there
    3. Rename the “Preferences” folder to “PreferencesXY”
    4. Start LR5 – it should now start and create a new LR5 catalog
    Of course, the user may not want a new catalog ... in fact, most people don't want a new catalog ...

Maybe you are looking for

  • Using ABAP Mapping

    Hi, today I read that it should be possible to use ABAP Mapping instad of Messagemapping. in depth SAP Docu told me following: Add additional mapping types in your Exchange Profile: com.sap.aii.repository.mapping.additionaltypes R3_ABAP|Abap-class;R3

  • Oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-271

    Hi All, For the following VO query , select meas_elem_weight from xxg2c_quota_weights_v where org_id = :0 and quota_id = :1 and comp_plan_id =:2 union select 0 meas_elem_weight from dual where not exists (select meas_elem_weight from xxg2c_quota_weig

  • How to find out, whether win 2003 is sick ?

    Hello together, I am running some SAP NW 7.0  Application-Server (Java+Abap) on Windows Server 2003  64bit in front to a central instance on a host  IBM System i with DB2. I don't have much knowhow in Windows Servers and want to know, how can I find

  • Can't install Updates to Photoshop CS6

    I have tried everything to install updates that I can think of, but still have had no success.  The option to check for updates in Photoshop 6 is grayed out(I am running Windows 7 on a relatively new machine).  I tried downloading the update and inst

  • How to change the sequence that VL10 use for sales order during DN creation

    We are using VL10 for DN creation , VL10 is executed in  background as a batch job ..... we have created a variant and have given range of shipping points for which we want to create  the Deliveries. What we want to understand is that how SAP standar