Updated to OS X Maverick and now the keyboard doesn't work. Anyone with similar problem and a solution?
I recently updated to the OS X Maverick and the keyboard just stopped functioning after working fine the first day. Pressing any key just produces a ding, but no mark. Pressing the return key produces a black dot as if you were putting in a confidential password. Has anyone had a similar problem and a possible solution? Thanks. mj-t
I am having the same problem and its not on every call, its very hit or miss, but very aggrovating. The screen just goes black and the home key nor the power button on top have any affect. Then the locked screen will show but you can't unlock the phone. I have to let it sit for a minute and then I can push the home button and go on in and the call is finally disconnected.
Similar Messages
-
I got a message saying that the batteries were low, so changed them for new ones and now the keyboard cannot be 'found'. There seems to be no way to turn it on and make it 'discoverable' to the system. At the moment I'm typing this on a spare keyboard plugged into the back of my mac via a USB. Please help!
Have you checked to make sure the batteries are inserted the correct way? Have you tried to turn it on by pushing the right upper (round) edge of the keyboard - if you do that, do you see a tiny little green light? Since you have a wired keyboard, can you get to the Bluetooth setup/preference pane so you can manually try to sync the keyboard?
PS - posting duplicate posts is not helpful - it makes things too confusing, so I've asked the hosts to remove your other (identical) post. -
Updated my iPhone 5 to iOS7, now the camera doesn't work
Updated my iOS once the 7 was already available here in the Philippines. It was just last night when my camera both front and back started not working. Tried to reset the setting, and turned the phone on and off, even left it off the whole night to see if it would fix the problem. Unfortunately, it didn't work. Anybody having the same problem? And perhaps, anyone here know how to fix this.
Just a thought, maybe have her post explaining what the issues are.
It could be anything from Cellular data and/or Wi-FI being off, to a data plan issue, to the device needing a simple reset.
Without specifics of the problem and what may have been tried, it's a little difficult to offer suggestions. -
Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?
I have this issue. Album artwork was totally fine before. After this update, it is all messed up and even got messed up when transferred to my iphone.
iTunes doesn't have the artwork anymore, but then iPhone has it but shows wrong artwork with wrong albums.
Please fix! -
I just upgraded the software on my iPhone 4s. Now the touchscreen doesn't work and on the screen is the itunes logo, an arrow and a plug. I have powered it off and on and nothing changes
The iTunes icon and cable means that it's gone into recovery mode - you will need to connect the phone to your computer's iTunes and you should be able to use that to reset the phone, and you can then restore/resync your content to it
-
I changed my apple ID & now the iMessage is not working neither with the old nor the new ID
I changed my apple ID & now the iMessage is not working neither with the old nor the new ID
Sorry to ask an obvious Question, but have you signed out in iMessage and iTunes store on your iPad then logged in with the new ID/Password?
It may be that the iPad is remembering your old login in one part of the iPad. -
I made a mistake of trying to put 5.0.1 beta 1 firmware on my ipod touch 3rd gen ( non-registered) unsuccessfully. Now the ipod doesn't work at all with any public firmware. Any suggestions?
You can try putting the iPod into Recovery Mode and restoring it:
http://support.apple.com/kb/ht1808
If that doesn't work, you'll need to take this up in the forums to which you have access as a member of Apple's iOS developer program.
Regards. -
I have a Macbook air. OS X 10.9.5. Since OS X update, under Citrix Reciever, the keyboard doesn't work anymore. The trackpad does. Please help.
The following from the Citrix forums indicates others are having the same problem and that one has opened a case number with Citrix: http://discussions.citrix.com/topic/355864-os-x-1095-safari-71/
-
after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails. when plugged in to sync with itunes, it remains 'stuck' at syncing step 2 of 7 backing up. has anyone had similar problems? any solutions?
I had this problem. I held down the power switch to power down completely. Takes a few seconds. Then use the power switch to turn on. Might take a couple goes.
Kirk -
I've rented several movies over AppleTV, but can not download. I get a message "An error occurred loading this content. Try again later. " i've been trying for 3 days now... anyone with similar problem?
I have the same issue, to temporarily fix it go to Settings > General > Restart. When it restarts the movie should play. You have to do this for each movie for the most part.
-
One button of the keyboard doesn't work correctly
Hi there,
I have a problem with my keyboard:
One button of the keyboard doesn??t work correctly: I want to write down a vowel with an accent (like in French and Spanish?), but if I press the button ´ and then the vowel, TWO dashes (´´) and the vowel appear: ´´i. Normally, there would automatically be an accent on top of the i.
I have already tried a different keyboard, but it??s the same problem when I connect it to my notebook. I have also tried to choose a different language like French and Spanish, where they have those accents, but it still doesn??t work.
It would be great if somebody could help me.
Thanks a lot,
HannaHi Hannah,
You do not say which options you have changed to try using a different language, but there are several options which do slightly different things.
If you go into Control Panel and select "Regional and Language Options", a new window opens with 3 tabs across the top. Choose "Languages" (the middle one), then press the "Details" button. This opens another window which allows you to view and change settings including the current input language and keyboard settings.
Changing some of these settings will not make any difference until you reboot your machine.
I hope this helps, let us know how you get on!
Weezle -
My iphone 5c the sound doesn't work only with earphone.
my iphone 5c the sound doesn't work it works only with earphone.
Hi there lavodette,
You may find the troubleshooting steps in the article below helpful.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
-Griff W. -
I've had my Macbook pro for about 3 1/2 years now. It has worked great until recently. A few months ago I noticed that the fan would always run really fast when I was doing simple tasks. After a few weeks/months, the fan was still really fast but it also started to make these loud noises. Now, it only occasionally makes the loud noise if I move my computer after its been stationary for a while. The fan no longer works at all and my computer gets exceptionally hot almost instantly when I turn it on. Is there a way to fix this problem without having to pay a ton of money to have someone fix it for me?
You can try a SMC reset:
http://support.apple.com/kb/HT3964
you can also check this:
http://www.ifixit.com/Answers/Active?search=replace+fans&csrf=sqmfo0yj19 -
I think I may have a virus! My keyboard is not working properly. When I press the zero key, it doesn't appear. Other keys that do not work include the directional keys, delete key, and others. I tried everything that I can think of to fix it, but nothing sesems to be working. Should I bring the keyboard and=/or the entire computer into my local Apple store+? see, the +? appears before the question mark, and I didn't put it there! Thanks!
No need to take the computer at this stage. Just take the keyboard into your local Apple store for examination. If you have another machine, not necessarily Apple, you could try the board on that or perhaps a friend's machine … they are largely universal.
You do not have a virus. -
Hi, hopefully someone can help me with an issue I've had with my mid-2011 MacBook air.
It was running fine until I installed the 2.9.1 EFI update from the app store; I believe this fixes problems caused with the 2.9 update however since installing it I've now got a problem when trying to log in. This is what happens:
I close the lid or put it to sleep.
I open the lid and the login screen appears.
The trackpad is non-responsive and I am unable to enter my password as the keyboard is unresponsive.
I then set the machine to sleep, wait a few minutes and wake it up again - still unresponsive.
The only thing that works is to hold the power key down to shut it down and start it up afresh. This time I am able to move the cursor and enter my password.
Its was perfectly fine prior to the 2.9.1 update (and I've not installed anything else in the meantime) but since the 2.9.1 update the above login problem has happened.
This is my Macbook Air's system (10.9.4) info if its of any help to anyone:
Model Name: MacBook Air
Model Identifier: MacBookAir4,1
Processor Name: Intel Core i5
Processor Speed: 1.6 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Boot ROM Version: MBA41.0077.B11
SMC Version (system): 1.74f4
Anyone else had similar problems?Hi Roj,
Since the update, I have a different problem (when the laptop is in sleeping mode, screen turned down, fan runs after a certain...)... Did not have time to contact support yet.
One member suggested me to visit: https://getsupport.apple.com/GetproductgroupList.action.
Hope it can help...
Luke
Maybe you are looking for
-
1410 all-in-one scannoing issue
Under windows xp, I could scan with a preview page that allowed separate items to be blocked, then scanned. It would then go back to the preview page and allow the other items to be blocked and then scanned. In scanning, I could edit the scanned item
-
Video out stopped working with 10.4.6 update
Hi, i've just installed the 10.4.6 update and now i have no video out. i have a video connected to the adc to s vhs connector. now when i start up my monitor starts up as the second display, and i have to put my computer to sleep and then wake it up
-
Hi All The scenario is given below: 1. Down payment of EUR 1000 done to a foreign vendor in Jan07 and TDS is deducted (say 22.44EUR inclusive of surcharge and ed cess.Amount in local curr-Rs 1122).Exchange rate on date of trans is-Rs50
-
Which components do I need to record midi from my keyboard into the iPad (including midi app?)? I just want to see the recorded sheet music. The keyboard does have midi output.
-
Quicktime aspect ratio problems? Help!
I'm trying to make a QT from my Avid Express pro 5.7. The aspect ratio looks great in Avid, but when i export (720 x 480 for DVD burning) the picture gets slightly squashed. Can anyne help me with this? I'm stumped! thanks!