Updated to server 10.7 status graphs not working

updated to server 10.7
in the server app under stats none of the graphs seem to work for processor usage, memory usage or network traffic. Anyone know how to fix this?

So far the only solution I have been able to find has been launching the recovery partition and running disk repair.  That will fix the problem until you trigger it again.  Fortunately, or unfortunately, I have pinpointed what triggers it on my computer. 
Seems to be a flaw in keychain access.  When Safari's connection times out due to an expired certificate (common in university networks that require a log in every few hours), the security settings freak out and effectively shut down safari's ability to do anything.  The fact that it attacks KeyChain access and iPhoto and more is just a really big system wide glitch.  Here's the run down:
http://digit.algravitas.com/2011/10/major-networking-glitch-found-in-os-x-v10-7- 2/

Similar Messages

  • Software Update via Server Admin 10.5.1 not working.

    I have a headless XServe running 10.5.1 that I control using Server Admin. Unfortunately, the feature to install updates via Server Admin doesn't seem to be working.
    When I click Check Now, it says it is "Checking for new software", then stays for a bit on "scanning in progress". It then stops, and there's no updates listed.
    When I use ARD to log into the machine and run Software Update there, there are updates to be installed.
    Does anyone know why this isn't working?

    I experienced this with a pre-release build from the past.
    You didn't specify where the build came from. Is it possible that the Admin that gave you the disk gave you an older pre-release build?
    These disks often came from bit torrents or the developer connection pre-release builds. Todays modern binaries are not compatible with the pre-release OS, so its typical to see the error messages that you have experienced.
    If you used a genuine apple branded production build then you may want to try the update again as I've seen that the update servers go down from time to time.

  • I've moved my Aperture library to another computer, and masters are referencing an old path name.  How can I update these references?  Reloctating masters does not work in this case :(

    I've moved my Aperture library from one computer to another using Finder.
    I merged the library with one which was already on the computer.
    Now, the photos I imported have reference to the old path name on my old computer.
    How can I update these references as "Relocate Masters" does not work in this case?

    Just one suggestion to be able to reconnect all at once:
    Create a smart album containing the images with missing masters:
    File -> New ->  Smart Album,     and add a rule: File Status is "Missing"     (or File Status is "offline")
    Then select the images in this album and go to the File menu:
    and select:   File -> Locate referenced File
    If you are lucky, Aperture will reconnect all at once, if you point the first image version to its counterpart.

  • Since updating to itunes 11, Home Sharing is not working

    Since updating to itunes 11, Home Sharing is not working.
    I am running Windows 7, 64-bit.
    All mobile devices are up to date with ios, including 2 apple tvs (2 & 3), iphone 4s and 3gs, ipad1 & ipad2.
    I've rebooted twice, turned home sharing off, then signed back in. Still nothing.  Rebooted the mobile devices.  No joy.
    Curiously, wi-fi sync is also not working - the devices are not showing up in itunes unless I plug them in. 
    Please Help!

    Yes, you guessed. After some rebbots it stopped working again .So it seems it is not a Firewall issue. Kept looking and found a suggestion in a forum to disable IPv6, apparently iTunes for Windows doesn't work well with IPv6. So I did, and after several rebbots and tests, both Home Sharing and Apple TV 1st Gen are working. To disable IPv6, follow this link
    http://support.microsoft.com/kb/929852
    It has an MS Fix It that will do it for you. Or if you wnat to go manual, follow this discussion, this guy was having the same issue several months ago
    https://discussions.apple.com/thread/3507281?start=75&tstart=0
    So far IPv6 is just being rolled out, and it will be a few years until everybody abandons IPv4 and go only with IPv6, so you shouldn't have any issues disabling it. And by then iTunes -I hope- should be fixed to work correctly with IPv6. Try it, and if you find any issues you can always enable IPv6 using another MS Fix it program, or manually reverse what you did
    Hope it is fixed this time!

  • Prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Has your problem been solved by the updates??
    Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
    MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
    Microsoft Office 2011:  version 14.2.3
    Mountain Lion: 10.8.2 (12C60)

  • I am using iPhone 4S lock came from Japan. From beginning, it is IOS 5.1.1 but now i have updated to IOS 7 and it is not working anymore now. Can you tell me what i have to do now?

    I am using iPhone 4S lock came from Japan. From beginning, it is IOS 5.1.1 but now i have updated to IOS 7 and it is not working anymore now. Can you tell me what i have to do now?

    No Japanese carrier provides unlocking services. Therefore, your phone must have been hacked to unlock it. That hack was removed when you updated the software. You need to be a legitimately unlocked phone.
    Best of luck.

  • HT3932 Wireless Keyboard Update 2.0  his update doesn't work!  I'm at 10.5.8 on my old iMac G5, installed the update and brightness and volume just do not work.  What next?

    This update doesn't work!  I'm at 10.5.8 on my old iMac G5, installed the update and brightness and volume just do not work.  What next?

    I have a brand new wireless keyboard... so it's never going to work.  BUT... I found a sort of work round! 
    Since it's eyeTV that I want to control the volume more than the system volume I discovered cmd and up/down arrows do the job.  I gess I'll forgo the brightness function.
    I'm a little frustrated that it appears Apple seems to want to push me towards an upgrade of a perfectly serviceable iMac G5.  I'll be keeping it to watch TV, surf the web, wordprocess and let the macbook pro handle photos & video.

  • HT201210 After updating to ISO 6, iTunes Match is not working on iPad.

    After updating to ISO 6, iTunes Match is not working on iPad. How can I fix this?

    After over an hour it completed and my albums appeared to be available, however when I go into songs they are blank!
    Can't access anything! Pics attached

  • After 10.10.1 update Back to My Mac is still not working

    When installing Yosemite Back to My Mac stopped working, Before the update it always worked perfectly. Tried the update 10.10.1, it is still not working. Any idea ?

    I too am having a problem, I've done all the troubleshooting, I've gone through all my time capsules settings, I've tried re-enabling back to my mac on both computers, removing apple id from time machine and re adding, the problem is not on my home network, if I'm on my home network it works great, when i go to work or school and try to connect, its worked twice, other wise it won't connect. I've tried messing around with my energy saving preferences, my iMac and macbook pro do not have the problem where it says Travis, Travis (2), originally this occurred but since changing the network sharing preferences that no longer occurs, there is nothing on this topic that has worked and i am stuck. i have an iMac 5k that i bought and restored from a time machine back from my macbook pro and bought a new time machine router. any help would be great. I'm using 10.10.1 and have the correct firmware update for the time capsule.

  • I have iPhone 3G with ios 4 but now i update new version and my phone is not working.it is not activating..when i tried it says please insert sim and try again..any one plez hepl.

    i have iPhone 3G with ios 4 but now i update new version and my phone is not working.it is not activating..when i tried it says please insert sim and try again..any one plez help

    Try this article if you haven't already
    This is the only possibility that came to my mind when reading about your issue:
    "If an iPhone, iPad, or iPod touch is not recognized in iTunes on Windows, the Apple Mobile Device Service (AMDS) may need to be restarted"

  • I have updated my iPod and camwow is now not working, i take a picture and it turns up black!!! please help!!!

    I have updated my iPod and camwow is now not working, i take a picture and it turns up black!!! please help!!!

    https://discussions.apple.com/message/18904355#18904355

  • After i updated to ios6.1 my 4s wifi not working anymore it greys out..how will it fix..plz apple do something

    after i updated to ios6.1 my 4s wifi not working anymore it greys out..how will it fix..plz apple do something

    I have the same problemafter upgrade to IOS6.1. I guess now iPhone5 is on the market, Apple is probably rubbing they hands hoping that people will move on. I have bought a Samsung Galaxy S4 since and will not be going back to iPhone.

  • Last update to ios6 - worst ever, facetime does not work as it used to, problems with skype

    last update to ios6 - worst ever, facetime does not work as it used to, problems with skype, losing connection or no9t connecting facetime to face time. Do something with it.

    I'm not sure yet, but It may be as simple as "settings", "FaceTime" "Off"

  • Why does the address/status bar not work?

    After updating to 9.0.1, my status bar will not work, or my address bar. If I try to type in anything and press enter into the address bar, nothing happens. Also, I cannot press forward or back as they always remain grayed out. The only way I can get to a website is by pressing home, which is thankfully google. I have to google the url to go to it.
    Remembering now actually, I copied all the folders from the main firefox folder and pasted them into a new install of firefox (I had this problem actually before firefox updated). I was hoping that copying these folders would save my addons and etc. after I downloaded a new firefox and re-installed it. I put the folders back and firefox is still messed up :/
    I just want it to work more Q_Q

    That issue can be caused by an extension that isn't working properly.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode

Maybe you are looking for