Updated to Tiger. Now unable to install iLife '05

A while back I wanted to upgrade from OS 10.2 to Tiger. I didn't have a DVD drive (just a regular CD-RW drive) so I bought a Pioneer DVR-110 super drive and installed it. At the time I didn't have all of my files backed up, so I didn't choose the erase and install option...I just chose the option to update the OS and keep the data.
After I performed the OS upgrade to Tiger, I then installed iLife '05. Everything seemed to work fine except there were a few items in the trash which would never seem to empty. Also, my computer was running a little bit slower.
After about one month, the finder frequently would "not respond" to certain basic commands such as opening files and folders.
To remedy the situation, I backed up all of my data onto DVD's and decided to perform an erase and install of Tiger. Things seemed to work fine. However, when I tried to install iLife again, the installer would not properly open. The Finder would still issue me the warning "not responding" and I seemed to be stuck. I opened disk utility and ran a verification and the verification passed. I thought that was weird so I ran the verification again and was told the volume needed to be repaired; inconsistent results. I wasn't sure if it was the installation disk or not, so I took the disc over to the local electronics store (by the way, I live in Japan, but all of my stuff was bought in the US) and inserted the iLife DVD into the stores iMac. The DVD checked out fine and the installer came up the way it should. So, I know there is something wrong with my computer, but not quite sure what.
My Power Mac G4 Dual 533 MHz is running with firmware 4.1.8f5. Could this be a firmware issue? There is a firmware update available, but it's been available for quite some time and I've never needed it before. In addition, my computer didn't give me any firmware warnings. I don't think it's the DVD player because it's worked fine before (didn't need to install any drivers before) and I can insert other DVD's and they work fine. It's just the iLife install DVD that is acting up.
Any guidance is much appreciated. Thanks.
Power Mac G4 Dual 533 MHz Digital Audio Mac OS X (10.4)

Thanks for your replies. I have backed up my data, reinstalled OS 10.4 by performing an erase and install, and am still having issues. Since I essentially started from scratch, I don't really know what to do. Things I still can't do:
-Start up from the OS 9 cd. I am trying to update my firmware, but can't because I can't run OS 9. The firmware update requires running OS 9 from the hard disk. I currently don't have OS 9 installed.
-Open the iLife DVD to install the software. Everytime I try opening the install DVD, the finder freezes.
-Update to later versions of OS 10. Everytime I try to update, applicable installer says I cannot perform the necessary update.
I removed third party memory and re-installed OS 10.4 again, but that didn't solve the problems I'm having. Does anybody have any ideas????
Thanks
Power Mac G4 Dual 533 MHz Digital Audio Mac OS X (10.4)

Similar Messages

I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1 ?

I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1 ?

See Here... Unable to Update or Restore...
http://support.apple.com/kb/HT1808

7.1 update to IPad now unable to use FaceTime and iMessage says could not sign in check your network connection. Why am I seeing this when I am connected?

7.1 update to IPad now unable to use FaceTime and iMessage says could not sign in check your network connection. Why am I seeing this when I am connected?

Check Settings>General>Date & Time>Set Automatically>On. Make sure that the time zone setting is also set correctly.
If that didn't solve the problem, restart your iPad and try again. If that fails, reset your iPad and try again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Unable to install iLife '08.mpkg via ARD3.2

I am unable to install iLife '08 on a remote computer using the "Manage > Install Packages..." option.
I've had the same problem with Logic Express 7.2 and Final Cut Express 7.
I've tried it from ARD3.2 on 10.4.11 as well as 10.5.3, installing to both 10.4.11 clients and 10.5.3 clients, and no matter how I try, it never works.
The transfer of the installer(s) seems to work, as it takes quite a while for the several gigs worth of pkgs to be transferred across the network, but the installation always fails.
"iLife '08.mpkg could not be installed. Error message: "Preparing for installation""
I've tried going granular and installing individual packages from within "Show package contents" but those packages are "smart" and won't install unless kicked off from the iLife '08.mpkg.
I'd much prefer to be able to push these softwares out piece by piece via ARD than to have to build them into my base images. Our network is robust enough to handle this kind of bandwidth, and I just don't feel good about building images that are 40GB+ in size (10.5.3, iLife, Logic, Final Cut, Jam Packs, Adobe CS3... these things all add up to enormous images).
Does anyone have advice, recommendations, etc?

It doesn't make total sense to me... so here is the relevant part of the log:
Jun 13 08:42:50 ISC-iMacG5-Image installdb[740]: started (uid 96)
Jun 13 08:42:50 ISC-iMacG5-Image installdb[740]: Opened receipt database on '/' with schema 17.
Jun 13 08:42:51 ISC-iMacG5-Image installer[736]: Found receipt (full match) for (iTunesAccess / com.apple.pkg.iTunesAccess): (iTunesAccess / com.apple.pkg.iTunesAccess)
Jun 13 08:42:51 ISC-iMacG5-Image installer[736]: Found receipt (full match) for (iLifeMediaBrowser / com.apple.pkg.iLifeMediaBrowser): (iLifeMediaBrowser / com.apple.pkg.iLifeMediaBrowser)
Jun 13 08:42:51 ISC-iMacG5-Image installer[736]: Found receipt (full match) for (iTunesX / com.apple.pkg.iTunesX): (iTunesX / com.apple.pkg.iTunesX)
Jun 13 08:42:51 ISC-iMacG5-Image installer[736]: Found receipt (full match) for (AppleMobileDeviceSupport / com.apple.pkg.AppleMobileDeviceSupport): (AppleMobileDeviceSupport / com.apple.pkg.AppleMobileDeviceSupport)
Jun 13 08:42:52 ISC-iMacG5-Image installer[736]: Package Authoring Error: Infinite loop between <choice> start_* attributes and mixed state aborted.
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/iLife%20'08.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/iLifeCookie.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/AppleIntermediateCodec.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/iPhoto.mpkg/Contents/Installers/iPhoto.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/iPhoto.mpkg/Contents/Installers/iPhotoContent.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/iMovie.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/iMovie_PreviousFolder.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/iDVD.mpkg/Contents/Installers/iDVD.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/iDVD.mpkg/Contents/Installers/iDVDThemes.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/GarageBand.mpkg/Contents/Installers/GarageBand.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/GarageBand.mpkg/Contents/Installers/GarageBand_Inst ruments.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/GarageBand.mpkg/Contents/Installers/GarageBandFacto ryContent.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/GarageBand.mpkg/Contents/Installers/GarageBand_Loop s.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/GarageBand.mpkg/Contents/Installers/GarageBand_Magi cContent.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/iLifeSoundEffects_Loops.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife%20'08.mpkg/Contents/Installers/iWeb.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: _installNextPackage of 1
Jun 13 08:42:53 ISC-iMacG5-Image runner[741]: Administrator authorization granted.
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: -[IFPkg(InfoConversionPrivate) _parseOldStyleForLanguage:] - can't find .info file (iPhoto)
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: The package "iPhoto" could not be opened. This can happen if the package has incorrect permissions or if the package has been renamed.
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: PFPackage::packageWithURL - can't instantiate package: /private/tmp/ARDPKGITEMS.dPKwcS/001B6396D6C4.1924/iLife '08.mpkg/Contents/Installers/iPhoto.mpkg/Contents/Installers/iPhoto.pkg
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: Error opening package "iPhoto.pkg".
Jun 13 08:42:53 ISC-iMacG5-Image installer[736]: Install failed: The Installer could not install the software because there was no software found to install.
Jun 13 08:42:57 ISC-iMacG5-Image installdb[740]: done. (0.023u + 0.018s)

Accidentally removed driver for 8600 in Macbook Air Yosemite now unable to install driver again

Please help. I accidentally remove this printer for a blind child using this printer exclusively. Now when I downloaded the software for the 8600 All in One it does not show up the printer at all. What can I do? Thanks

Hi @PhillipK7,
Welcome to the HP Forums!
I noticed that you are unable to install the driver for your HP Officejet 8600, on Mac OS X 10.10. I am happy to look into this for you!
How is the printer connected? Wireless or USB?
Are you able to make copies with the printer? Copying a Multipage Original.
In the meantime, I would suggest going through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Mac OS X, and follow the steps for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks.
Hope this gets you connected again, and have a good day!
“Please click the Thumbs up icon below to thank me for responding.”
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Downloaded lion now unable to install and launch?

after the download, have been unable to install or or launch from back up?

unable to go online to app store to download it

SINCE UPDATING TO YOSEMITE NOW UNABLE TO FIND OLD EMAILS WITH NAME RECOGNITION

Apple Desktop
Since changing over to Yosemite i am now unable to find groups of old emails, if i type in say travelzoo i used to be able to find all the old emails, but since 31st January when we changed to Yosemite now it shows no old emails in a block form Can you help please

When you type travelzoo into the search field, does it make any token suggestions such as People or Name, or does it provide no search tokens?
If you don't get any, try reindexing Spotlight: Spotlight: How to re-index folders or volumes - Apple Support

After an update, Firefox is now unable to establish a connection with server.

After an update, attempting to use Firefox results in the following error:
Unable to connect
Firefox can't establish a connection to the server at en-us.start3.mozilla.com.
This error message appeared after uninstalling and re-installing Mozilla Firefox. Initially the the connection couldn't be made at google.com
Firefox will not open at all now.

In SQL server you can configure it how to communicate with clients (Shared Memory, Named Pipes, TCP/IP).
When the application is on the same computer with SQL server Local Named Pipes or Shared Memory are used.
When is on other computer TCP/IP or Named Pipes are used to communicate with the server.
Check these options and enable the appropriate.

Hp printer software update 3.0, now unable to print from preview

I have a mid 2007 iMac with a 2.4 Ghz Intel Core 2 Duo running OS 10.9.5 Build 13F34. I updated the HP Printer Software Update Version 3.0 on Oct 9, 2014. I have a HP Laserjet 3050 All in One printer that has worked flawlessly.
Now when I try to print PDFs or Jpegs from Preview, the "ready light" on the printer flashes a couple of time but nothing prints out. I cannot print from Preview. I cannot print PDFs from Adobe Reader. I can print Jpegs from iPhoto.
I have time machine. How can I go back to the previous HP printer software version and will I mess up my computer by trying to do so?

Yeah, I thought that "update" just updated Apple's printer drivers that it stores on the computer. I didn't know that it actually applied the drivers. At any rate, those are presumably Apple's drivers, not HP's. The printer manufacturer's drivers usually have more functionality than Apple's.
Sorry, I can't tell you where to look for that driver in Time Machine. However, I have another suggestion.
First, power down and unplug the computer for 15 seconds before rebooting. If that doesn't work, then the next question is: Have you ever downloaded and run HP's Mac software for this printer? IF SO, you might try deleting your printer in system preferences, and then adding it back, however, when it's found, do not accept the default AirPrint software but check the dropdown list to see if there's an option for HP software before continuing.
If you've never installed HP's software, then downloading it from HP and running it's installation may resolve your problem.

Unable to update iTunes.. now unable to OPEN iTunes

I was having trouble trying to update my iTunes because it was unable to uninstall Quicktime.. but now I can't even open iTunes. Windows keeps telling me that it encountered an error and has to shut down the program. How do I get iTunes to open? And how can I update my iTunes and Quicktime?
Windows XP

I was having trouble trying to update my iTunes because it was unable to uninstall Quicktime.. but now I can't even open iTunes. Windows keeps telling me that it encountered an error and has to shut down the program.
let's check to see if the current itunes problem is being caused by a broken or missing QuickTime. (itunes needs a properly functioning QT in order to work properly.) try launching your QuickTime. does it launch properly, or do you get an error message?
if you get an error message, try uninstalling your existing QT from Add/Remove. does it uninstall, or do you get an error message or other unusual behavior?

Updated to Tiger, now I can't log in

I just upgraded my Mac OS X 10.2.8 Server to Mac OS X 10.4.8 Tiger. I used the Archive and Install Option and selected the Preserve Users and Network Settings option. It installed, and I restarted the system. When the log in screen came up I attempted to log in to the administrator account. After I typed in the password it gave me the following error message:
You are unable to log in to the user account "[account name]" at this time.
Logging into the account failed because an error occured. The home folder for the user account is located on an AFP or SMB server.
I am able to log into another administrative user account, but it is not the main account. Is it doing this because I upgraded from a server OS to a regular OS? Any help would be appreciated.
Thanks!

Please don't post the same question to multiple forums unless someone explicitly tells you to do so because it's more appropriate. It confuses responders. Close out this one and hopefully someone who knows servers can answer the one you posted in the installation forum. While you're waiting, peruse the server forum at http://discussions.apple.com/category.jspa?categoryID=96. You might find an answer there.

Windows Vista Home Premium (SP2) - Update Error Code 80071AA7: Unable to install KB3033889

I am having problems updating my Windows Vista Home Premium (SP2) with KB3033889
I am always getting the Update error Code 80071AA7
I have tried a clean boot, to install Microsoft Update Standalone Package (KB3033889), but does not worked.
I tried Sfc /scannow, and "Could not repair corrupted file", and i have checked "CBS.log" file:
POQ 93 ends.
2015-03-19 02:18:46, Info                  CSI    000001dc [SR] Verify complete
2015-03-19 02:18:46, Info                  CSI    000001dd [SR] Repairing 1 components
2015-03-19 02:18:46, Info                  CSI    000001de [SR] Beginning Verify and Repair transaction
2015-03-19 02:18:46, Info                  CSI    000001df Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini
do not match actual file [l:24{12}]"settings.ini" :
Found: {l:32 b:ceS/bmgz5Fkqs00J27mkzYn/b2SuD9mJsx/R1y3hPqA=} Expected: {l:32 b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o=}
2015-03-19 02:18:46, Info                  CSI    000001e0 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version
= 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
After that i have checked "WindowsUpdate.log" file:
2015-03-18   22:12:23:584   1264   db0   Handler   WARNING: Got extended error: "POQ   Operation   HardLinkFile   OperationData
\SystemRoot\WinSxS\x86_microsoft-windows-t..icesframework-msctf_31bf3856ad364e35_6.0.6002.19296_none_774ec727ec2f0da4\msctf.dll, \??\C:\Windows\System32\msctf.dll"
I am out of ideas.
Can some one please help me?
What can i do?
Thank you.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Unable to install iLife '06 from cd

I am running OS10.4.9, I can read and write DVD's, I have the installer application, I repaired my permissions and ran all diagnostics from Disk Warrior, I successfully installed the software on my laptop (I purchased the family install), I am the administrator so no problems there. I am stumped. DVD drive will read and open all other discs that I put in so I know it is working. It will not even open the disc and show an icon on my desktop. HELP! Thanks.

Hi All,
I want to install Oracle Applications 11.5.10 on my laptop.
I have installed Oracle Enterprise Linux 4 from DVD on my new laptop, but after installation i am unable to reboot.
I am getting following error after reboot
PCI:Failed to allocate mem resource # 10000@88000000 for 0000:04:00.0
PCI:Failed to allocate mem resource # 10000@88000000 for 0000:05:00.0
My new laptop configuration would be :
Acer Intel Dual Core, 1.46 GHz
2GB RAM, 160 GB HDD
Its a SATA
How to know whether it is 32 or 64..is this causing issue ?
Plz help me out.
Regards
Harish.

Running windows XP, encountered a problem updating iTunes. Now cannot re-install it. when i try to re-install, the website acts as if nothing is wrong and will not reinstall. How do I re-install iTunes, when the website detects that it is installed?

I am running windows xp and tried to download the latest version of iTunes 11.1.4 for windows xp. Unfortunately it did not install correctly. There was a error message: Microsoft Visual C++ Runtime Library, Runtime Error!, Program:C\Program Files\iTunes\iTunes.exe, R6034, An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information. Then,when I close that box, another box appears that states: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 1114). When I attempt to reinstall iTunes though the Apple iTunes website, nothing happens ( no reinstall) presumably because it detects that it is already installed. How do I work around this problem to reinstall iTunes?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT4623 After installing IOS 6.1.3 I am now unable to install any app. I hit the "install" it asks me for my password and then is goes back to install.

After install iOS 6.1.3 everytime I attempt to install any app, I hit "install", it aks me for my password and then clocks for a couple of secs and then goes back to "install" without installing.

Have you tried a soft reset? Hold down the home and lock buttons until you see the apple icon appaer then let go. If this doesnt work, open iTunes, conect the handset to the computer and do a full restore.
Hope this helps.

Updated to Tiger. Now unable to install iLife '05

Similar Messages

Maybe you are looking for