Updated to usb 2.0, having issues with the zen microph
basically, put a new usb 2.0 card thing in my computer and when i plug my zen microphoto to it i get a message saying that i need to install the drivers for it, which i can't find online and don't have the cd for anymore.
My Zen Nano Plus works fine on it and i didnt have to do anything, any ideas what i can do?
I had the issue and read almost every blog on the net in order to fix it.
RESTORE the iPhone as a NEW phone, and the issue will be resolved.
I read that pictures on the phone itself can also be a cause of the issue so deleted all of the pictures off of my computers before restoring the phone also. (not much of a pic guy)
My camera is now fine. PLEASE email me if you have issues, i know little tweaks can help/hurt an issue, so feel free to ask me
[email protected]
Similar Messages
-
Is anyone else having issues with the most recent Facebook app update? I updated it on my iPad 2 yesterday, now it will not open app at all. I have restarted iPad, uninstalled app and reinstalled, several times and still it will not work! Any suggestions? I have also closed the append still no results!
I just started having this yesterday. It's only happened twice, but it's annoying. My wife texted me that she was coming home last night, and it showed up immediately on my iPod Touch but not my iPhone. I opened my iPhone and it soon updated. Worked fine after that. Then just a moment ago today my wife texted me and the same thing happened. I heard my iMac and iPod Touch receive the message but it didn't display on my phone until I opened the phone and it showed up again a little bit thereafter. I suppose I'll send Apple some feedback on this issue.
-
I am still having issues with the TOC pictures. I got several chapter/section photos to show up, but can't seem to repeat this success. It is some mystery that happened during a time that I had practically given up. This should be such a simple thing. Drag and place a picture into the placeholder and it shows up in the TOC....right? Help, help help! want to get this thing done and it's taken two days of work just get some of the photos to show up. I am going to have to publish this ibook with no photos in several sections.....why can't this be simple? I have even had someone else spend hours trying to figure this out. This software is such a GREAT idea....come on...help with this little part of it.
I had the same problem myself. I got to the point where I couldn't replace the photo, of a new chapter, in the TOC. What I did was to duplicate an existing chapter that was working and was able to replace it's TOC's photo. I also found that if you try different areas of the photo you can sometimes get it to replace correctly. For example, instead of dragging the new photo to the middle of an existing photo, try dragging it to the right top corner.
-
ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?
I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod. -
hi have the ipod touch and having issue with the reminders app. do not have the reminders page just the completed page
The problem has been fixed with the most recent OS X software update.
-
I am having issues with the address book in iphone 4s ios 7. it won't let me add and adress for a new contact. anybody has an idea of what's wrong and the solution ?
Do you have Restrictions turned on in Settings>General?
-
Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues
Hi, just got off the phone from BT Business. It is the Business 2wire hub that has the issue. The girl from technical talked through a direct modem to Mac connection and my download took 20 minutes. If you are on Fibre broadband this is the only current fix or a new router if non fibre customer. Hope that helps.
-
Since the previous computer crashed without my Adobe CS3 Design Standard for Macintosh applications being uninstalled, I'm having issues with the CS3 on my new Macintosh laptop. Please help, I've tried using the online "contact us" with no success, unable to get in contact with a tech support agent that can assist me.
CS3 is too old to run on a new Macintosh laptop, sorry. You'll have to purchase CS6 or a Creative Cloud subscription.
-
i m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help.
i have told them nuumerous times that for better understanding i have made a video of it but no response..
really disspointed with your customer support.
i have uploaded them in google docs..links below.. t
he first one happened on 30th of april 2014 https://docs.google.com/file/d/0B6z0lUXVGPGrc0tXNnZFaDQ3WDg/edit
the second happened today. i called customer care but no satisfactory respose either. https://docs.google.com/file/d/0B6z0lUXVGPGrSldEeWQ3aGFhaDA/edit
who is going to help me out and atleast pay attention to what my problem is. apple seems to ignore my attempts to show them what is the problem... the dont even want to see the videos.. !! disgusting.
its still under warrenty. please help.Take your iPhone to an Apple Store or authorized service center in the country where you purchased the iPhone and they will look at it and replace it under warranty if applicable.
If you cannot take it person contact them to determine how to send them your phone.
You can't expect them to replace your iPhone without first examining it. -
Hi All,
I tried to search through the community, but with the sheer volume of posts, I didn't find anything that seemed like the same issue.
My iPad 4 just started having issues with the volume. On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.
I haven't tried wired ear phones, but I am sure they'll be the same way.
It's very random, but consistent enough to happen several times per day.
Thanks for any help that anyone can provide.
I have restarted it and also did a Hard Reboot and it didn't help.
Thanks Again,
Scott P.Well there you go, when you advertise it just be sure to say that you can't even see the scratches at half brightness and see how it goes.
Of course you are saying you want $500 for one with many scratches on the screen, has been dropped, but the scratches aren't visible at half brightness, and has no warranty. Or I can buy a refurbished iPad 4 WiFi 32 GB directly from Apple with no scratches and a one year warranty for $499. http://store.apple.com/us/product/FD514LL/A/refurbished-ipad-with-retina-display -wi-fi-32gb-white-4th-generation
Why would I buy yours?
I wouldn't pay more than $300 for a used model with your specs in perfect condition. But yours is far from perfect. I think your high point is $250 which is why I said 50%. -
Im having issues with the audio on my Iphone 4s, I can't hear any audio i.e music or video unless I have the headphone installed. Any clues the problem or how to correct?
1. http://support.google.com/youtube/bin/answer.py?hl=en&answer=58132
2. System Preferences > Flash > Advanced > Delete All
3. Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Quit Safari.
Restart computer. Relaunch Safari. -
IF YOU ARE HAVING ISSUES WITH THE DROID TURBO BEING SLOW
IF YOU ARE HAVING ISSUES WITH THE DROID TURBO BEING SLOW ON WIFI JUST TURN OFF GLOBAL MODE!! DONT ASK ME WHY THIS WORKS BUT IT DOES. I TOOK MY FIRST PHONE BACK TO THE STORE BECAUSE I THOUGHT IT WAS DEFECTIVE BUT THEN MY REPLACEMENT DID THE SAME THING. GLOBAL MODE IS WHAT THE PHONE IS SET TO USE OUT OF THE BOX. I SWITCHED IT TO LTE/CDMA AND NOW IT WORKS FLAWLESSLY. AWESOME
I'm glad you had luck with this. I have the same issue, and i've replaced the droid turbo 4 times. I've tried it on 4 or 5 different wifi networks and it doesn't give me any type of speed at all.
-
2.1 for iTouch now , but not 4 iPhone? Having issues with the 2.1 iTouch!!
So I hope the 2.1 experience I am having with my iTouch, isn't a foreshadow of what is going to happen to me Friday?
iTouch is bombing out & not restoring, but before that I was getting a message I needed iTunes 7.7.1 (which I have) then it was not able to update to 2.1 on the iTouch. Maybe it's a good thing I have to wait till Friday, my iPhone I need for work, my iTouch is a toy. "Bricking" it I can wait on Apple, "Bricking" my iPhone customers can't call me... Dooah!simondirect wrote:
So I hope the 2.1 experience I am having with my iTouch, isn't a foreshadow of what is going to happen to me Friday?
Sadly, I would bet money that it is. I know I'll be holding off the iPhone upgrade until I see how many phones it bricks.
I, too, am having trouble with the touch update. It says I have an update available, but when I click the iTunes8 update button, I get the error message
There was a problem downloading the iPod software for the iPod "J's 32GB iPod touch". The requested resource was not found.
I guess I should look on the bright side - better a download that won't than an iPod that won't. -
Anybody else having issues with the new 1.1??
For some reason, I have encountered two issues already.. Whenever I'm exporting my galleries as web pages, nothing happens! It creates a null folder that I specify but then doesn't export any photos or html pages.. If I delete the folder and do it again, the exact same way, for some miracle it then begins to export.. There is no logical explanation and its clear that its a bug..
Also, when exporting multiple images into CS2, that also fails for me.. It only opens up one picture and even though the others are selected, it doesn't seem to do the trick.. Its not my computer because i have a brand new quad w/ 4 gigs of memory.. I didn't encounter either of these issues with the older version..
Anybody else??I tried both, and was successfull both times.
External Edit:
1. I selected 2 images (D200 RAW images).
2. Right clicked to get the contextual menu and selected Open with External Editor (I have my prefs set up for Photoshop).
3. Both images opened in Photoshop.
I can't image it being system specific. What camera and file type are you using? -
Anyone having issues with the latest update?
I did the latest update and after the update there was a picture of the Apple tv that had the power cord plugged in to it and a micro USB cord pointing to the iTunes symbol. Luckily I had a micro USB or I'd be screwed right now. Anyone else having this issue, and why?
Welcome to the Apple community.
This can happen for a number of reasons, the most likely reason is a glitch on the network somewhere that corrupted the file or there was something wrong with the Apple TV before the update was applied.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)
Maybe you are looking for
-
Hi, please help me with this issue. I have a form with multple blocks based on database tables. All the fields are displayed on a tabbed canvas with multiple tab pages. I also have a toolbar (one of the blocks in the form) with query, commit, cancel,
-
.mov files will not open in quick time when double clicked in iPhoto
when i'm in iPhoto and try to double click a video file, Quick Time will not open to play the movie.
-
I updated my ipad 3 to iOS 6. now my appstore shows chinese apps and prices in rmb. how can i change the settings?
-
About the right patches for EHP3
Hi Sap Gurus, We had recently upgraded for the ERP EHP 3 The current levels of our package is SAP_APPL 600 SAP_HR 600 at 36 SAP_BASIS 700 EA_HR 603 002 level EA_APPl 600 But we are getting many errors. Can anybody suggest what are the right level pa
-
SimplePass PE 2011 came preinstalled on my new HP computer and I've used it successfully with IE8 and IE9. I recently installed IE10 and now SimplePass no longer works. It doesn't pop up for any of the configured web sites.