Updated to v4.5 now phone not working, red light blinking

K...so I updated to the new software v4.5 on my 8320 curve and now it is not booting up and the red light is blinking twice every few seconds.  I have already removed the battery and done everything that I can think of without using JML because I don't want to lose my info....please help...thanks.

I fixed my problem. I found this on the tmobile support site, and it worked after the second try.
Handheld does not turn on and the light flashes
Ensure the handheld is NOT connected to the computer.
In BlackBerry Desktop Manager, open Application Loader and Update Applications.
Remove the battery in the handheld.
Reconnect the handheld to the computer
When the Drop-down list on the Communication Port Selection window changes to USBIN, click Next.Note: If there is no USB option in the drop-down disconnect the device, remove the battery and re-connect the device without the battery.
If the Handheld Password Required dialog box appears, type your password. The Application loader will detect the BlackBerry device.
Proceed with running Application Loader. Allow the Application Loader process to complete; this can take 30 - 45 minutes.Note: If the battery was removed during step 5, make sure it is re-inserted when the Application Loader comes to the Wait For Device Initialization stage.
 Do not disconnect the device from the computer until you receive a message your PC, “The loading operation was successful.”

Similar Messages

  • Updated Software on Itunes now phone stopped working

    Itunes asked to update phone software. Phone has stopped wotking just display USb cable connected to Itunes. Cant turn off phone not responding to any commands. cant turn off

    namesser wrote:
    I haven't made a backup of this ever. Didn't really know how and honestly I didn't expect this kind of crap from a Mac.
    I have had very reliable Macs.... one 11 year old one still gets used every day. But things happen...even to trusty Macs. Before I got DiskWarrior I had directory corruption so bad I lost eveything on the drive. It took me three months to re-enter all my Investment transactions from paper copies after an erase. DiskWarrior has always saved me since. But I learned to do the following so it would never happen again.
    I like the free demo of  SuperDuperto make clone backups. It's free,  Leopard and Snow ready and is easy to use. If you buy the full version you can do incremental backups.
    You should use Disk Utility to do a Disk Repair booted up on your install disk, before you make a clone of it. DiskWarrior is way better to use.
    I then partition my external disk, in Disk Utility, with a partition that is the same size , actually a tad bigger, as my system disk. I then use SuperDuper to clone my system disk over to that partition. 
    With a clone on an external FireWire drive (USB drives are not bootable on PPC Macs but are on some Intel Macs) you can bootup on it to do your repairs or just run your Mac anytime you have trouble with your main drive. Be careful, there are a few external FireWire drives out there that are not bootable on PPC Macs. Check the drive's manual to be sure.
       DALE

  • Not working and light blinks orange?

    My Airport Express is connected to powered computer speakers and was able to receive my iTunes over the network.
    Now for some reason it is not working and the light is blinking orange?

    Hi
    Status light blinking amber means:
    AirPort Express has completed its start up sequence but has no IP connection (due to out of network range, Ethernet unplugged, no path to Internet or local router, ISP problem, set up as wireless client but not in access control list, etc.)
    I would unplug it leave it for a bit then plug it back in. If this doesn't work, then reset it.

  • Camera not working and light blinking after upgrade

    After upgrading to Mavericks, the built-in camera on my MacBook Air (mid-2013) has stopped working in all applications. When I start an application that uses the camera, the image does not appear, and the camera light blinks rapidly until I close the application. Console shows the following messages:
    11/24/13 11:34:08.000 a.m. kernel[0]: AppleCamIn::power_off_hardware
    11/24/13 11:34:08.000 a.m. kernel[0]: AppleCamIn::power_on_hardware
    11/24/13 11:34:09.000 a.m. kernel[0]: ISPCPU: ERR: ./H4ISPCD/filters/IC/CImageCaptureH4FSM.cpp, 452: FlowIC00: MIPI error (interrupt source = 0x8)
    11/24/13 11:34:09.000 a.m. kernel[0]: ISPCPU: ERR: ./H4ISPCD/filters/IC/CImageCaptureH4.cpp, 2503: FlowIC00: Perform error recovery (1).
    The latter two messages repeat until I close the application.
    This is not the same problem as the Skype camera issue that was resolved with a previous update. I have tried resetting the NVRAM and PMU, reinstalling Mavericks, and using the guest account.
    This user has the same issue: https://discussions.apple.com/message/23721483#23721483
    Any help would be greatly appreciated — I would really like to have my camera working!

    Hello grmurchison,
    Thank you for providing the details of the issue you are experiencing with your built-in iSight camera.  You have taken some really great steps to isolate and troubleshoot the issue.  I found an article with a couple of additional steps (you can skip the steps you have already taken):  
    Built-in iSight cameras
    These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
    See if the issue is application-specific.
    Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
    See if the issue is user-specific.
    Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
    Find out if the computer recognizes the iSight
    Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
    Reset SMC or PMU
    Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
    If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
    How to Troubleshoot iSight
    http://support.apple.com/kb/ht2090
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I update the software and now is not working, I update the software and now is not working

    I update my software, which was suggested by mi Ipod "ajustes". It finished and it asked me to connect it to the Itunes. I did so. The Itunes updated the software, and it says "Debe restaurar su Ipod" ... when I try to restore my Ipod it says "error"... and now my ipod is like freeze with the apple like when you turn it on, and with the bar which is not moving.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Phone not working after 8.1.1 update in iPhone 5

    Did 8.1.1 update (stupid 1.2 GB) and now phone not working. It give a funny number on My Number

    To add further info: iPhone 5s and using CDMA mobile service. I either get no sim card or no service.

  • Dear sir I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract. Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card. And invalid sim appeared.so I bought it without contract but it

    Dear sir
    I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
    Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
    And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
    Please tell me whats the matter?
    My phone serial no  86034HTCA4T
    Modem firmware  04.12.09
    Thanks

    Without contract is not the same as unlocked. The update to iOS 7 relocked
    the iPhone to the wireless carrier to which it was originally locked. You must
    contact that wireless carrier to see if they offer unlocking and if you qualify.
    If you used jailbreak or other hack to unlock the iPhone initially, the method
    used may prevent a legitimate unlock from succeeding and may render your
    iPhone unuseable.

  • My 3G I Phone Not Working With My SIM Card After I Updated my phone

    my 3g iphone now ner not working with my sim card aftet i updated my iphone

    Was your phone originally locked to a different carrier?

  • Phone not working after update volume. Battery life resets on own

    Ever since last ISO update phone not working right. Looses volume. Shuts off   Battery life went out to lunch. Texting slow. Any fix yet I see lots of issues. And tec support wants to charge as phone is off warranty. Was working finè before update.
    Very sad customer

    Hello 2canoes and welcome to the BlackBerry Support Community Forums.
    Sorry to hear you're experiencing issues with your device after updating your software.
    It's recommended you contact your mobile service provider for investigation on this matter and to open a support ticket with BlackBerry technical support.
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Phone not working after OS update, phone not working after OS update

    phone not working after OS update, phone not working after OS update

    I do have a questiion.  I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen.  It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!!  I have tried holding down the home key and power button several times and the same message continues to appear. 

  • Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

    Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

    Basics from the User Guide are restart, reset, restore from backup, restore as NEW.  Unless you've tried ALL of these, you're not done troubleshooting.

  • My phone was left in a car overnight and now is not working correctly, screen looks funny and I cannot make calls? Will they be able to assist in  a store?

    My phone was left in a car overnight and now is not working correctly, screen looks funny and I cannot make calls? Will they be able to assist in  a store?

    Make an appointment at any Apple store, see what the genius bar says/does.
    You don't metion whether the car was hot or cold.

  • Hi , i bought this phone from Dallas , TX  on 22 jun 2012 , right now I am in india . My phone Accidentally fall in water tub. And now is not working . For iphone replacement ,I went to local apple store in Pune (India). but these guys are not helping me

    hi , i bought this phone from Dallas , TX  on 22 jun 2012 , right now I am in india .
    My phone Accidentally fall in water tub. And now is not working .
    For iphone replacement ,I went to local apple store in Pune (India). but these guys are not helping me . And they  are not ready to replace my phone .
    I also tried contacting local apple employee  named " RATI KALE " , but didn’t got any positive response.
    I provided them apple invoice, passport, visa details, my air ticket details. but still  they are not ready to help me . My phone details are as below :
    Serial No:C8*******T9Y , IMEI : 01*************995
      Please help me in replacing my phone.
    <Personal Information Edited by Host>

    Your warranty is only good in the US where you bought the phone. You will need to contact Apple Support in the US to arrange to return your phone to the US for repair. You should also inquire as to whether they will be able to return the phone to you in India.
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.

  • HT4061 I dropped my phone in the toilet and now is not working.   What should I do?

    I dropped my phone in the toilet and now is not working.   What should I do?

    Put in in a bag of dry rice for a few days and see if that drys it out. Don't be surprised if it doesn't. You may need to take it to an Apple Store. They will offer you a replacement at a reduced price
    Hope that helps

  • HT201412 my device was updated and now is not working anymore, it is in recovery mode all the time

    my device was updated and now is not working anymore, it is in recovery mode all the time.
    what can i do???

    Delete the shortcut you have at the moment and then create a new one as follows:<br><br>
    #Use Windows Explorer to navigate to C:\Program Files\Mozilla Firefox.<br><br>
    #Right click '''firefox.exe''' and choose '''Send To''', then '''Desktop (Create shortcut)'''<br>
    Bear in mind that you're using an BETA version of Firefox and you're likely to encounter similar issues in the future.

Maybe you are looking for

  • How do I set up my e-mail so it doesn't delete it from my server when I delete it on my iPad

    When on my iPad and I read my  e-mail and then delete it, it also deletes it on my AT&T server.  How do I set it up so that it leaves it on the server. I read my e-mail from several different devices and do not want it deleted from the server.

  • I cannot access customize in my toolbar

    when i right click toolbar i can see the option for customize, but it will not appear.i run xp and i just downloaded firefox 4.i tried deleting and then replacing the localstore file. nothing worked.please help, i enjoy firefox and don't want to go b

  • RN 10G-10G B2B Interface Error

    Hi , We triggered a 3A4 Request from 10G Host to a 10G Remote TP . TP sent an Ack Back . In Reports on the TP side we can see the message in "Process Ack" state and Acknowledgement in "Collab Wait" State . On the host side we can see the 3A4 message

  • Same ERROR Message Every Time, What Does It Mean

    Please help, everytime I try to compile build or run a program with Real J it says: Unable to initialize threads: cannot find class java/lang/Thread Exit code: 1 There were errors I have a JDK 1.1.8 is this not good enough or what is the problem? Tha

  • Am I understanding this correctly?

    Do you have to have iTunes installed on a PC to get FW or Software updates? That is the stupidist thing I have ever seen. I've already talked to the packagers and the network security team (As they currently block iTunes) and this is a deal killer...