Updated to X.4.9 all applications have ground to a halt
Hi
This may be a topic that has been posted before But I've gone back through the topics and haven't found one that addresses this issue.
I just upgraded a G5 w/ 1.5 Gb RAM to X.4.9, and through the normal Apple updates it is now up to X.4.9. Since that time almost every application takes up to 5 minutes or more to load. The performance I had in X.3 has gone right down the tubes, ie. the eject key on the keyboard functioned last night, but when I started the unit up today it stopped functioning. Everything just seems to take 3x longer to do.
Any suggestions
Thanks in advance
Denny
The overall system performance will be sluggish until the Spotlight indexing is completed which I forgot about.
Repairing disk permissions is not near as important as checking your boot volume for any directory errors with Disk First Aid repair via Disk Utility when booted from your Tiger install disc which should be done before installing a major OS update such as 10.4.9 and before installing Tiger over a previous OS X version such as Jaguar or Panther with your Tiger install disc.
http://www.thexlab.com/faqs/durepairfns.html
http://www.thexlab.com/faqs/installswupdates.html
Check this link for recommended maintenance for OS X which isn't much focusing on the Maintenance Myths section.
http://www.thexlab.com/faqs/maintainingmacosx.html
Regarding having only 6 GB of free hard drive space available, check these links.
http://www.thexlab.com/faqs/lackofram.html
http://www.thexlab.com/faqs/freeingspace.html
Similar Messages
-
HT201210 i updated my iphone and now all i have on the screen is the itunes icon
i updated my iphone and now all i have on the screen is the itunes icon
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
NOTE:
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
itouch was updating software and failed, now all i have is a screen showing usb plug and itunes logo,cant reset or restore.help
Type "unable to restore" into the search bar at the top of this page by Support and read the resulting help article
-
In FINDER, all applications have .app after it now, why?
HI!
Just got a new iMac. Used a firewire to migrate the date from my old eMac.
Anyway, now in FINDER, all of my applications have .app after them (iPhoto.app, Dictionary.app, iChat.app, etc).
When I click on something in Finder...I have to double click it and it opens the application directly. If i single click it highlights it in black.
Before, when I would single click on iPhoto (for example) it would open a new screen with the camera icon and information on iPhoto, then I would single click the camera icon and then iPhoto would open.
How do I get rid of the .app? I like the single click and not opening an app directly?
Thanks!!Wow! Such an easy solution to a problem that I could not figure out! Thank you so much.
Just to let you know, I even went down to the Apple store and asked then what to do and they didn't know! They told me to leave it alone.
LOL!!
Why would they have the option of .app or not? I mean, what do some use a .app for when you know it is an application?
(to add....I have another question in iPhoto 08 if you are interested ........ -
Aftr update to 10.8.5 12F45, I just noticed that all my files - photos, emails, you name it, EVERYTHING, is dated with 05.01.13. Files that I have not touched for months, expiration dates of credits cards, everywhere there is a date field - there is only one date and that is 05.01.13. What is going on?
Incorrect date or time displayed in various applications
-
My new laptop has been asking for an update so i went on with it.. now i cant see my ichat, mail and preview icons on my dock. I looked for it and when i tried to open it, it says it's been diabled. What happened?! How can i get it back?! HELP please
Hi,
This Users Tip was written to Enable the Reinstall of iChat.
AS it is the app itself rather than the support parts that is missing you should be able to do the "Easy Way" for that app.
Insert the Install Disk.
Drag window large enough to see the Option Installs Folder
Open that and then Launch the Optional installs.mpkg.
Select iChat and select Continue to Install.
This will install iChat at the Install Disk Level.
As iChat gets up dated with certain OS Updates you will need to Download and run the Combo Version of the last OS Update you did.
Download the .dmg.
Expand and launch Installer.
Run it over the top of what you have.
The Users Tip also tells you how to use Pacifist to Open the Install Disk and select various bits.
Obviously this can be used for the other apps you are Missing.
These too, will need you to "Run the Combo" afterwards.
7:34 PM Tuesday; October 4, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Just updated premier pro cc and all applications are broken
I deleted all the programs and all the files related to the progras, did a fresh re instal of after effects as a test, same issue.
Importer/ exporter is broken, cant import or export at all, spent three hours on the phone waiting to talk to someone, finaly did and thir sugestion was to start a new Admin account on my mac, that did not work so, yeah f- me, I am loosing money everyday I cant edit.The main cause of crashes on Mac recently has been that OS X set the permissions for certain folders to read-only. Please consult this thread: fixing permissions problem that impedes start of Adobe applications | After Effects region of interest.
-
Spinning wheel on desktop after all applications have quit
Ok. My macbook is a little old (2008 operating system ios 10.6.8). So i am not shy to the various issues it's been suffering through lately. But this one is new. When I go to my apple icon to force quit an application that is making my computer run a little slow. It says that Finder is not responding. So I forcequit it and now the spinning wheel wont dissapear from my desktop. Every other application works fine. And when I'm on safari the cursor is normal. But heres the kicker. When I quit safari. My tool bar on the top including my apple icon dissapeared and the spinning wheel is still on the desktop. Something isn't right about it I think finder is on the fritz. Any suggestions would be greatly appreciated. Trying to save this old lady.. Other than that she's doing pretty great. Thanks a bunch
try this;
http://support.apple.com/kb/HT3964
you could also consider adding more ram. take a look here;
http://www.crucial.com/uk/store/drammemory.aspx -
Could you please give me some advice
It may be that you are up to date for 10.4.11.
Exactly what is your concern? -
every time i start my computer says update 3.6.12 ready to install. no matter how many time i have clicked install i get a message -- partail update not be applied. i all ready have 3.6.12 and cant get the thing to stop
It shouldn't be necessary to reboot the computer to complete an update.<br />
If a reboot is needed then that usually means that some (security) software is blocking files or you need elevated Administrator permissions.<br />
Run the Firefox program once as Administrator (right-click: Run as ... : Administrator).
If that still causes the same problem then remove the Firefox program folder to do a clean install. You need to download a fresh copy of the full version from http://www.mozilla.com/firefox/all.html -
Updated to Mavericks. Now all users have same bookmark set and changes by one user changes bookmarks in the other accounts.
Any ideas?
Thanks,
DavidAll the users are synchronizing Safari with the same iCloud account. That's what you have to change.
-
I have Adobe Acrobat 9 Standard on both of my computers.
Some time ago, one crashed my computer and I had to reinstall the operating system and all applications.
After I had installed once Acrobat 9 Sdt in the computer, I wanted to update the software version 9.0.0 update to the same level as it was before the crash and that the other computer has version named 9.5.5.
The system for update from version 9.0.0 does not work at all. "There are no updates" listed in the dialog.
Can you advise how I get my Adobo Acrobat 9 Standard (Version 9.0.0) could be updated to the same level as the computer had before the crash.ftp://ftp.adobe.com/pub/adobe/acrobat/win/9.x/
-
All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!
Error report as follows
Process: Pages [208]
Path: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier: com.apple.iWork.Pages
Version: 4.1 (923)
Build Info: Pages-9230000~1
Code Type: X86 (Native)
Parent Process: launchd [93]
Date/Time: 2012-08-22 12:33:15.909 +0100
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 102101 sec
Crashes Since Last Report: 11
Per-App Interval Since Last Report: 2217715 sec
Per-App Crashes Since Last Report: 4
Anonymous UUID: 1FA704D3-D5EF-4CE3-9813-42E4559157DC
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: _SFAAutosaveUserActivityException
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Expected in: /Library/Application Support/iWork '09/Frameworks/SFArchiving.framework/Versions/A/SFArchivingI'm having this issue as well only with a little different twist I guess. I'm transferring the iWorks applications from my Macbook Pro 3,1 with Lion to a new MBP 10,1 running Mountain Lion. I transferred the apps over using DropCopy since the older MBP doesn't have AirPlay. Applications show up but crash upon opening. This is the first install so there are no previous plist, versions or such to delete. All three crashed upon opening every time until I just had to have Keynote and purchased again - although Apple agreed to refund that purchase since my previous version quit working. Any ideas since I don't have any previous plist/versions to delete? Thanks in adavnce for any help you can offer.
Process: Pages [13521]
Path: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier: com.apple.iWork.Pages
Version: 4.3 (1048)
Build Info: Pages-10480000~1
Code Type: X86 (Native)
Parent Process: launchd [153]
User ID: 501
Date/Time: 2013-03-11 14:57:02.175 -0400
OS Version: Mac OS X 10.8.2 (12C3103)
Report Version: 10
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @rpath/SFCompatibility.framework/Versions/A/SFCompatibility
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Reason: image not found
Binary Images:
0x1000 - 0x354fe3 com.apple.iWork.Pages (4.3 - 1048) <3F2BE397-E81E-3355-C0DE-8B0F014E897B> /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
0x3ec000 - 0x46bff7 com.apple.iLifeMediaBrowser (2.7.2 - 546) <24A0A118-874B-3C7C-B50C-C80BED03A15F> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
0x8fe3e000 - 0x8fe70e57 dyld (210.2.3) <23DBDBB1-1D21-342C-AC2A-0E55F27E6A1F> /usr/lib/dyld -
Hi, I can't download any application from the aap store it's on a waiting mode, I tried to update some application that I all ready have and it's the same
You will not lose everything on you phone if you backup prior to updating. You can do it maunaully (simply by syncing your phone with itunes) but when you update iTunes will prompt you do back up your phone anyways. After you've updated you can reload everything on to your phone with the itunes back up.
-
I just verified my Apple user ID and password but certain updates won't download (gives me the signal that I'm incorrect). I keep changing it, verifying but not all applications let me proceed. So I can't download itunes software updates or update my iphone even though I have just verified my info. I know others that have this problem but can't get support to resolve it.
Hi mpellichero,
Thanks for visiting Apple Support Communities.
The steps in this article can help if you are being asked for the password to your previous Apple ID:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Best Regards,
Jeremy
Maybe you are looking for
-
Crystal Report Viewer on Client Machine
Hi all, I am new to Crystal Reports. I want Open the crystal Report from SAP Interprise Portal. I want to know the Crytal Report viewer needs to be installed on client machine or without that also we can show the report. Thanks for your su
-
My daughter is going off to college and I'm trying to install her new iPod on a new Toshiba PC laptop. I've installed and uninstalled and reinstalled all of the software way too many times (why couldn't she use a mac at college). Anyways, the last ti
-
Which tasks required for a Developer in a SAP project with SAP XI?
Dear all, I'm a ABAPer (Developer too), i will join into a SAP development and maintenance project that use the SAP XI. In order to prepare for this project, now i should determine and study the "Specific Skills/Tasks required" for a ABAPer (Develop
-
SELECT query performance : One big table Vs many small tables
Hello, We are using BDB 11g with SQLITE support. I have a query about 'select' query performance when we have one huge table vs. multiple small tables. Basically in our application, we need to run select query multiple times and today we have one hug
-
Problems updating a table.
Hey, I'm writing a program to manage a mysql music library. So far everything is working ok, but I seem to have run into a wall. I have my user interface create a custom table model that displays my data on a frame. I want to have a refresh button th