Updated version of Swype
This is more of a shout out to Verizon to update swype than anything. The preinstalled version is still at version 1.64.40.9380. The current version of swype is up to version 2.6 or something like that. Because of the agreement swype has with verizon, it seems that verizon is responsible for the OTA update. So Verizon, for Christmas, I would like the updated version of swype.
If you'd like to see the preloaded version of swype on your phone updated too, just give a small shout out on this board. Thanks for the responses in advance.
The difference is we have the full version of Swype on our Droid X, the later version is only a beta. Betas are always a few steps ahead of the official versions. Our last swype update came with the 2.2 update. I imagine the official update will be right in line with 2.3 release.
Similar Messages
-
Upgrade version of swype for droid x2
Dear Verizon,
I have a droid X2. The version of swype on it is 2.24.66.17859 .
I contacted Swype and i asked them what the current version of swype they are shipping is. They said v3.0 just started shipping to OEMs. They said they are still shipping v2.70.xx as well, where necessary/requested.
Can you please let us know when you plan to push out an upgraded version of swype. Thank you so much for your time.
Sincerely,
Rich
NYCTrue, but the OP wanted to know when they update will be recieved so I figured its easier to just express the biggest fact that even if the update comes out it will not be installed until it is installed in a flash form like what happens with a OS upgrade... If it wasnt a system file there wouldnt be a concern but it is so the update normally wont access the app to update it..
-
While saving a workflow using SharePoint designer on a SharePoint site, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
Steps to recreate error:
Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
Access the list using SharePoint Designer 2013, in the workflow section, click new workflow.
In the new workflow dialog, enter workflow details, click save (see screenshot below).
Error message is displayed as below:
After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
Workaround
When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
Notes
Workflow Manager 1.0 is installed.
The site has been registered with Workflow manager using Register-SPWorkflowService
cmdlet.
Any clue on why is this happening?Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Why can't I connect to the Internet on my Adobe Reader? And why do websites tell me I don't have Adobe downloaded when I have an updated version on my computer? It is an IPad,does that affect it?
Also, download and open the free Adobe Reader app. Then read the Help section to figure out how to use it.
-
Hello,
Please help me figure this out. I'm very unhappy at the moment. I'm fustrated and don't have any idea how to revert to the original version before the update was done on iMovie 10. I NEVER hated APPLE until NOW!! I love APPLE products and apps so please help me stay in that mindset. So I worked on some movie projects when I got my macbook pro 6 months ago. I update reguarly. I saw the update prompt and honestly, I did not think I would have ANY issuess with opening my previous files that I created only a few months ago with this updated version.The new updated version of iMovie 10 won't let me open my previous files I created before the update today. I have a wedding that I'm trying to finish and deliver and now I can't because that file version won't open. I keep getting an error message and the iMovie app closes. Last night I saw the file and tried to open it but no luck. Error message came up again. I reboot and turned off my laptop for the evening and tried again just now but nothing!! I need that video. My job depends on it! I worked so hard on this wedding video and now it's lost and won't open. I work another job and don't have much time. I really don't want to start all over again. Please help me. Thanks so much for your assistance.
Fustrated APPLE customer
Jolly A. RuppI also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul -
I have itunes in windows xp, but my ipod touch has updated version of itunes. Windows xp cannot get updated itunes. I am having difficulties transferring my music into my computer. Does any one have an idea how to do it?
iTunes 11 is compatible with
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
Try:
Trouble installing iTunes or QuickTime for Windows -
Hello,
I am trying to move photos from my hard drive to my mac. Mac is using an updated version of Iphoto and is denying the transfer.
How do I get around this? Do I download the order version? or can I not get my photos? If anyone can help please do.
You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto.
Thanks CarolI copied my photos onto my hard drive from my mac about 3 months ago. I just plugged my hard drive in to put my pictures back onto my mac but it is giving me a message when trying to open up the photos from the hard drive that states
Like I said we need to know exactly what you did
THere are lots of totally different ways to "copy your photos" onto a hard drive
Exactly how did you do that? The correct way to move an iPhoot library is to verify that the hard drive is formattted Mac OS extended (journaled) and then to drag the iPhoto library intact as a single entity to it - reverse to bring it back - just drag it from the EHD to the pictures folder (default location) on your computer
Why are you doing this?
you can try Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database - depending on what has been going on this might resolve things
LN -
i would like to sync my second generation ipod touch to a new laptop with the recently updated version of itunes. in order to do this, it deletes all the music of the ipod. i would like to be able to save my music as i have spent alot of money purchases it. i have backed up the ipod in order not to loose any of the music but i cannot find where the songs are backed up to? can you please help me find where the songs have been backed up to so i can save them please
See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
The iPod backup that iTunes makes does not include synced media like apps and music. -
Hello,
I have the following scenario for the installation of EPM 2013 environment:
1 Server running Windows 2008 R2 SQL Server 2008 R2 Service Pack 2
1 Windows Server 2008 R2 Standard SP1, running Sharepoint 2013 Enterprise (Standard Initially installed and then migrated to the Enterprise in order to install Project Server 2013), Project Server 2013 and Workflow 1.0 (2013).
After configuring and validating the configuration of Workflow 1.0 by http://server_name.example.com:12291 page and also check the Application Services in Central Administration and receive the Workflow Status = Connected.
Alright, but when I run the SPD 2013 RTM to test the creation of Sharepoint Workflow 2013, I get the following warning:
"Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities."
I've tried:
a. Restart SPD2013;
b. Restart Server 2013 and Sharepoint Workflow 1.0;
c. Reinstall and reconfigure Workflow 1.0
And the message is always displayed, preventing the use of Workflow Sharepoint 2013.
Can anyone help me, I'm in the middle of a deployment to a customer.
Print of alertHow did you uninstalledLanguage Pack from SharePoint 2013 ? when I googled it I found that language pack cannot be uninstall@
http://technet.microsoft.com/en-us/library/cc262108.aspx
"If you no longer have to support a language for which you have installed a language pack, you can remove the language pack by using the Control Panel. Removing a language pack removes the language-specific site
templates from the computer. All sites that were created that have those language-specific site templates will no longer work (the URL will produce a HTTP 500 - Internal server error page). Reinstalling the language pack will make the site functional again.
You cannot remove the language pack for the version of SharePoint 2013 that you have installed on the server. For example, if you are running the Japanese version of SharePoint 2013, you cannot uninstall the Japanese language support for SharePoint 2013." -
I have iBooks 2.1 on ipad. I changed my password and can no longer update the app. If I delete the app and install the updated version, will I lose the books I have purchased?
Try logging out of your account on the iPad by tapping on your id in Settings > iTunes & App Stores and then log back in and see if you can then update the app.
If you do delete the app then you should be able to re-download your ibook purchases via the Purchased tab in the ibookstore in the app. But in case some of them are no longer available in the store and/or you have PDFs or epubs in it, then you could first connect it to your computer's iTunes and do File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11) which should copy them over to the Books part of your iTunes library so that you have your own copy of them and can sync them back (even though they aren't iTunes purchases it should also copy over any PDFs or epubs that you have in the iBooks app) -
On 4/2/12 Firefox informed me that Java had serious issues with security and I should let them block it, so I did. Later I found I couldn't play Pogo anymore so I tried to enable Java but it still wouldn't work. My Java is up to date, 6.0.290.11. Now I cannot update Java, error 1606, nor can I uninstall Java from my computer, same error cannot access location, in order to re-install. Since I was using the most updated version, my Java should not have been blocked. Anyone else have this problem? I am stuck and can't update or re-install or anything.
I have the latest version and today it blocked it
-
After installing the most recent iTunes update/version iTunes will no longer run on my PC (Windows 7). I receive multiple error windows with the Microsoft error code R6034. Microsoft's Help site states that this error occurs when a driver attempts to access the C++ library without a "Manifest". I do not know what a manifest is, but apparently any attempt to directly access the C++ library is not permitted. The site instructs the viewer to contact the application developer.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
My JPEGS are no longer being copied over to Finder. Only a random fraction are copied. It use to work perfect. I can move them 4 or 5 at a time, but it is very time consuming. Is there a bug in the updated versions of iPhoto?
OK - here is what I've done in the past. As I want to be able to save my photos on a DVD that can be read by both a PC and a Mac, I am burning them in Finder. I start by downloading into IPhoto. I'll flag and edit the ones I want to print or post to the web. After that I want to take all the keepers and move them from IPhoto to various files I create in the document section of Finder. I've done it both ways in the past, copy and paste or just drag over, all the files would transfer over. Now there may be dozens of pictures that do not move over - very random, in one case there were only 6 photos and the 3 vertical ones did not copy over.
I'm wondering if this is a software issue or if there is just too much data being moved around. FYI there are 2 Nikon cameras I use and the files from both do this.
Thanks -
I need to download an updated version of a file every few days to use. My secretary works on the file all the time. I thought i could use my old airport extreme and attach an external HD and set up a network to do just this. At work we alll use pc's. How can i make this work? At the moment we use usb stick to transfer which is getting to be a bit of a pain as the file grows every week. Presently 5GB.
I thought i could use my old airport extreme and attach an external HD and set up a network to do just this.
Yes, you can use either the 802.11g or 802.11n AirPort Extreme Base Station (AEBS) to attach an external USB HDD for file sharing. Either AEBS model would allow you to share out this HDD to either Macs or PCs. From the PC, the shared HDD would appear as a network drive which you can map via Windows Explorer. -
While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?
The installer should have gone into your Apple Software Update folder:
C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
Right mouse click the msi file and select INSTALL
Maybe you are looking for
-
I have one Apple account and would like to use iCloud. I would like to have 3 iCloud accounts. One for each person in my family. One person has an iPhone3gs, one has a iPhone 4, and I have a iPad and an iPhone 4s. I would like all pictures, contacts,
-
IPod with folder icon, won't reset
I bought my third iPod at the end of summer, an iPod photo 60 GB. It has worked perfect until 2 days ago, when it suddenly froze. I rebooted it, but the display showed a sad iPod. Checked the support files and tried to put it into Disk mode, but it d
-
Itunes Error song cannot be found would you like to locate it?
I downloaded Itunes 10 on windows vista last Saturday, but after I synched my Iphone 3gs I noticed that none of my 1000 songs where on my Iphone as well as my 55 Ringtones bought from myxer.com. When I click on the song/ringtone it comes up with an e
-
I downloaded my photos on my laptop so I have them, I need to delete some of my photos for storage on my iPhone 4. If I want some of the photos that I have on my laptop, can I put them back onto my iPhone later on?
-
I have a program that uses a UDP transmitter. I use UDP because I specifically do not care if anyone is listening. I use UDP OPEN with a specific port to get a CONN ID. I use UDP WRITE with the conn ID and a specific DESTINATION IP and DESTINATION PO