Updated with v1.2 now it won't turn off ?

Any one seen or heard of this. I ran the updater earlier to the new ipod updater v1.2 and now can't shut my ipod 60G photo off using the play/pause button or anything else ?
If you no one can help how do I go back to the older version of the updater ?

Were you listening to music before trying to turn it off, or looking at photos/using it as a USB drive?
Try "rebooting" it - hold Menu and the select button at the same time for a few seconds.
My Photo has had no problems turning off that are related to the firmware - only the problems turning off related to looking at photos and using disk mode (that I mention in another thread).

Similar Messages

  • My ipod screen just turned blank white randomly and now it won't turn off/reset or connect to the computer... need help

    my screen just turned blank white randomly and now it won't turn off/reset or connect to a computer or really do anything... need help.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar
    Some other users have had the same problem

  • Just Downloaded & Installed Update 1.1.1 - Now iPod Won't Turn On???

    I just downloaded & installed the iPod Update 1.1.1 and now my iPod won't turn on???
    What gives?

    i have just had the same thing happen to my ipod i installed update 1.1.1 now i can't turn ipod on

  • I updated my iphone and now it won't turn on

    i updated my iphone and now it just wont turn on! The apple sign comes up as if its going to turn on and the sreen goes darker and just goes blank. why wont it turn on? its been doing this for the past half hour

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified... this will Not necessarily work.

  • I have just updated my phone and now it won't turn back on. The display is currently black with the apple logo and a lot of sentences in white writing at the top all starting [NAND]????? what can i do to fix this?

    I have just downloaded the new update and now my phone wont turn back on. The screen is blank with this across the top on the page:
    [NAND]_findflashmediaandkeepout:601 physical nand blcok offset1......... (several more sentences similar to this saying error etc)
    This happened before when the battery went dead and i plugged it in to charge, but started working again after a while. This time however its not doing anything.
    HELP!

    Might be hardware failure. Take the iPhone to the nearest Apple store
    for evaluation. Make a Genius Bar appointment to avoid delay at the store.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/

  • I tried to update my iPhone 5s now it won't turn on.

    I've plugged it into my laptop and it came up on iTunes stating the phone is in recovery mode, I clicked to restore the iPhone and it is currently doing so now. I don't understand how I updated my ipad and that had no issues yet my phone did? Will my phone turn on after the iPhone has restored? I'm worried as I've not even had the phone that long. I had no issues before the update.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • I have updated my iphone and now it won't turn on, only thing showing on screen is a usb connection needing to be connected to iTunes

    Please Help

    i dropped my iphone, sceen smashed, but worked afterwards.
    10 mins later was not working.
    i was just ready to take to a shop and i googled, found you guys
    so i was pressing te lock and home key b4 but only for a few seconds, no joy.
    you guys advised me more 10-15 sec, after 10 second heart melted still no joy
    ....but....
    18 seconds it work
    thanks every1 xxx
    just got to go get screen fixed now x

  • Just updated my iphone 5s now it won't turn on at all?

    I have recently just updated my iphone 5s to an update that I have received today about fixing a problem in China. I updated the phone. It turned itself on and hasn't turned itself back on nor can I turn it on at all.

    It makes us 3 having this issue https://discussions.apple.com/message/24702787#24702787

  • Updated my Ipad and now it won't turn on

    So I have searched and tried things here and there and it will not turn on since I updated via WIFI, the apple logo comes up then it gone, or it says to plug into itunes, tried that it didn't work, tried holding the power and home button down 10 secs that didn't work, tried holding the home button while plugging in USB that didn't work. What else can I try????

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    From Here
    http://support.apple.com/kb/TS3281
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • I have had my iPhone 4s for one week. Now it won't turn off or on totally.

    It just beeps, unless I turn the ringer to vibrate, then it keeps vibrating!! Any one else having these issues? Trying a restore right now.

    Can't finish restore because it won't stay on long enough!!  Grrrr....

  • I tried to update my sons iPad and now it won't turn on or off just a picture of a cable and I tunes symbol. Can it be fixed or is it broken I've seen posts saying their iPads died after doing updates.

    I tried to update my sons iPad now it won't turn on or off it shows a cable and iTunes symbol tried holding down sleep button & screen button but no luck does this mean it's Broken I've seen posts saying their iPad died after doing updates.

    It's not broken, it just means that the iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
    You will need to connect the iPad, via its cable, to a computer's iTunes (you will need an up-to-date version of iTunes installed on the computer), and you should then be able to reset the iPad and restore/resync the content to it.

  • 2007 Macbook Pro - Won't turn off or on. Power on button only results in quickly flashing power-on button on front of computer by display open latch. Turn off by disconnecting power cord and removing battery. Help!

    2007 Macbook Pro OS X Maverick with maxed out processor and hard drive. It's been running beautifully for years! - When shutting down the computer failed to turn off. Now it won't turn off or on. Powering on only results in quickly flashing power-on button on front of computer by display open latch. To turn off by disconnecting power cord and removing battery. Help!

    Hi P S 13,
    If your MacBook Pro will not power on as you describe, I would suggest you troubleshoot using the steps in this article -
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Help! I've recently updated itunes & ipod but now it won't sync with my ipod even though the laptop recognises it and charges. I've reinstalled itunes and factory reset ipod, still nothing. How can I fix?

    Help! I've recently updated itunes & ipod but now it won't sync with my ipod even though the laptop recognises it and charges. I've reinstalled itunes and factory reset ipod, still nothing. How can I fix?

    iOS: Device not recognized in iTunes for Mac OS X
    Also see:
    If you connect the iPod to another computer does iTunes not see it?
    What version of iTunes is installed?
    Whast model iPod and iPhone and what iOS version?
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    For the enugh space, you are trying to sync too much media to the iPhone

  • I tried to update the software for my iPhone 4S. It froze, and now won't turn off, or on, or sync.  Any ideas on how to fix this?

    I tried to update the software for my iPhone 4S, 16 GB to the most recent version (8.1?).  I don't know what I was updating from, because I can't access that, but it was whatever was installed on it (I got it about a year ago, so probably 6.something). 
    It froze, and now won't turn off, or on, or sync with my macbook plus, which is what I have always sync'd it to.  (I backed it up and sync'd it right before I tried to update the software.)
    Since it originally froze almost 3 hours ago, it shows a white screen with the apple on it and a line underneath.  When I try to sync with my laptop, it says it needs me to enter a passcode on the phone, which I can't enter because the screen is frozen.  So I'm unable to access the iPhone portion of iTunes.
    I have tried to turn it off, with no luck.  I have tried rebooting my laptop and syncing, but I still get the same result.
    Does anyone know how to fix this?
    I really wanted to wait to update the software, but I was having internet connectivity issues for the past 3 weeks, and Sprint suggested updating the phone's software.
    Thanks in advance for your help!

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • I tried to update my 4s and now it won't work. Is there anything I can do? It's only 6 months old..

    I tried to update my 4s and now it won't work. Is there anything I can do? It's only 6 months old..

    Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808

Maybe you are looking for

  • When saving documents from word 2013, the save as dialog shows the default path under "other web locations"

    it used to be in the gold ole days of sharepoint 2010 and office 2010 that when I created a document in sharepoint and saved it I would get a dialog, like this (see below)  I have also attached a screen shot of the 2013 save dialog (when you save a d

  • New to the Mac World - please help...

    I have purchased a Time Capsule to use as a Hard Drive with my Mac Book air so I don't drown it in files. I would like to know how to change the preferences so I can store application files on the Time Capsule. Mainly in Mail - I want to create a Mai

  • Exchange 2013 SP1 CU8 installation stuck

    Good Morning, I'm just installing CU8 for Exchange 2013 on a DAG Member (only mailbox role installed), and setup is stuck at 49% of "Mailbox Role: Client Access service" for more than 2 hours now. The ExchangeSetup logfile says: [04/15/2015 06:44:20.

  • Amount in certain currency is multiplied by 100 in bex report.

    Hi, Amount in certain currency is multiplied by 100 in bex report. Data in multiprovider is good. Suppose if amount is 123.123 in multiprovider then in Bex report it is showing 12312.3. This is happening where currency is HUF. I understand that I hav

  • Can't log onto Wifi..

    My dear Apple friends I have a quick question for you! I bought a macbook pro a few months back in Oz (complete convert now despite my lack of computer skills) and Ive been trying to link it up to my home WiFi unsuccessfully. Essentially I was puttin