Updated WLCs shows wierd log messages and most APs do not associate
Hi, I recently updated my 4402 WLC to latest Software Version (7.0.98.0).
This first seamed to have worked fine. WLCs rebooted fine, then APs rebooted and upgraded their software images.
All fine as it seamed.
The I went on to also upgrade to latest Emergency Image Version(5.2.157.0).
After rebooting the WLCs most APs won't associate again.
Logs from WLCs shows a lot of messages like:
Oct 7 20:11:38 wlc-1 WLC-1: *mmListen: Oct 07 22:11:38.857: %MM-3-INVALID_PKT_RECVD: mm_listen.c:6691 Received an invalid packet from 192.168.128.18. Source member:0.0.0.0. source member unknown.
Oct 7 20:11:38 wlc-1 WLC-1: *mmListen: Oct 07 22:11:38.857: %OSAPI-5-OSAPI_INVALID_TIMER: timerlib.c:542 Failed to retrive timer.
Oct 7 20:11:38 wlc-1 WLC-1: -Traceback: 105fbe18 102cb318 105f3ab0 10c0d250 111cd0cc
Oct 7 20:11:38 wlc-1 WLC-1:
Oct 7 20:11:38 wlc-1 WLC-1: *mmListen: Oct 07 22:11:38.857: %MM-3-INVALID_PKT_RECVD: mm_listen.c:6691 Received an invalid packet from 192.168.128.18. Source member:0.0.0.0. source member unknown.
Oct 7 20:11:38 wlc-1 WLC-1: *mmListen: Oct 07 22:11:38.857: %OSAPI-5-OSAPI_INVALID_TIMER: timerlib.c:542 Failed to retrive timer.
Oct 7 20:11:38 wlc-1 WLC-1: -Traceback: 105fbe18 102cb318 105f3ab0 10c0d250 111cd0cc
Oct 7 20:11:38 wlc-1 WLC-1:
Oct 7 20:11:39 wlc-1 WLC-1: *mmListen: Oct 07 22:11:39.749: %MM-3-INVALID_PKT_RECVD: mm_listen.c:6691 Received an invalid packet from 192.168.128.18. Source member:0.0.0.0. source member unknown.
Oct 7 20:11:39 wlc-1 WLC-1: *mmListen: Oct 07 22:11:39.749: %OSAPI-5-OSAPI_INVALID_TIMER: timerlib.c:542 Failed to retrive timer.
Oct 7 20:11:39 wlc-1 WLC-1: -Traceback: 105fbe18 102cb318 105f3ab0 10c0d250 111cd0cc
Oct 7 20:11:39 wlc-1 WLC-1:
Oct 7 20:11:39 wlc-1 WLC-1: *mmListen: Oct 07 22:11:39.749: %MM-3-INVALID_PKT_RECVD: mm_listen.c:6691 Received an invalid packet from 192.168.128.18. Source member:0.0.0.0. source member unknown.
Oct 7 20:11:39 wlc-1 WLC-1: *mmListen: Oct 07 22:11:39.749: %OSAPI-5-OSAPI_INVALID_TIMER: timerlib.c:542 Failed to retrive timer.
Oct 7 20:11:39 wlc-1 WLC-1: -Traceback: 105fbe18 102cb318 105f3ab0 10c0d250 111cd0cc
Oct 7 20:11:39 wlc-1 WLC-1:
Oct 7 20:11:40 wlc-1 WLC-1: *mmListen: Oct 07 22:11:40.749: %MM-3-INVALID_PKT_RECVD: mm_listen.c:6691 Received an invalid packet from 192.168.128.18. Source member:0.0.0.0. source member unknown.
Oct 7 20:11:40 wlc-1 WLC-1: *mmListen: Oct 07 22:11:40.749: %OSAPI-5-OSAPI_INVALID_TIMER: timerlib.c:542 Failed to retrive timer.
Oct 7 20:11:40 wlc-1 WLC-1: -Traceback: 105fbe18 102cb318 105f3ab0 10c0d250 111cd0cc
Oct 7 20:11:40 wlc-1 WLC-1:
Oct 7 20:11:40 wlc-1 WLC-1: *mmListen: Oct 07 22:11:40.749: %MM-3-INVALID_PKT_RECVD: mm_listen.c:6691 Received an invalid packet from 192.168.128.18. Source member:0.0.0.0. source member unknown.
Oct 7 20:11:40 wlc-1 WLC-1: *mmListen: Oct 07 22:11:40.749: %OSAPI-5-OSAPI_INVALID_TIMER: timerlib.c:542 Failed to retrive timer.
Oct 7 20:11:40 wlc-1 WLC-1: -Traceback: 105fbe18 102cb318 105f3ab0 10c0d250 111cd0cc
Oct 7 20:11:40 wlc-1 WLC-1:
Oct 7 20:11:40 wlc-1 WLC-1: *osapiReaper: Oct 07 22:11:40.905: %OSAPI-6-FILE_DOES_NOT_EXIST: osapi_file.c:348 File : /proc/755/stat does not exist.(errno 2)
Oct 7 20:11:40 wlc-1 WLC-1: -Traceback: 105eaae4 105f4d44 105f7848 105fa648 105f3ab0 10c0d250 111cd0cc
Oct 7 20:11:40 wlc-1 WLC-1:
Oct 7 20:11:43 wlc-1 WLC-1: *mmMobility: Oct 07 22:11:43.210: %OSAPI-5-OSAPI_INVALID_TIMER: timerlib.c:542 Failed to retrive timer.
Oct 7 20:11:43 wlc-1 WLC-1: -Traceback: 105fbe18 102d8be0 102bc81c 102d5d20 105f3ab0 10c0d250 111cd0cc
Oct 7 20:11:43 wlc-1 WLC-1:
Oct 7 20:11:43 wlc-1 WLC-1: *mmListen: Oct 07 22:11:43.210: %MM-3-INVALID_PKT_RECVD: mm_listen.c:6691 Received an invalid packet from 192.168.128.18. Source member:0.0.0.0. source member unknown.
Oct 7 20:11:43 wlc-1 WLC-1: *mmListen: Oct 07 22:11:43.211: %OSAPI-5-OSAPI_INVALID_TIMER: timerlib.c:542 Failed to retrive timer.
Oct 7 20:11:43 wlc-1 WLC-1: -Traceback: 105fbe18 102cb318 105f3ab0 10c0d250 111cd0cc
Oct 7 20:11:43 wlc-1 WLC-1:
Oct 7 20:11:50 wlc-1 WLC-1: *osapiReaper: Oct 07 22:11:50.913: %OSAPI-6-FILE_DOES_NOT_EXIST: osapi_file.c:348 File : /proc/755/stat does not exist.(errno 2)
Oct 7 20:11:50 wlc-1 WLC-1: -Traceback: 105eaae4 105f4d44 105f7848 105fa648 105f3ab0 10c0d250 111cd0cc
When looking back a bit in the logs it looks like this started after upgrading the Software version. But after this first reload it the APs came back and worked. Now they don't.
The case seams to be the same with both my WLCs.
What could have gone wrong?
Please advice.
Not sure which messages are concerning you the most...
Regarding the message:
Oct 7 20:11:39 wlc-1 WLC-1: *mmListen: Oct 07 22:11:39.749: %OSAPI-5-OSAPI_INVALID_TIMER: timerlib.c:542 Failed to retrive timer.
Oct 7 20:11:39 wlc-1 WLC-1: -Traceback: 105fbe18 102cb318 105f3ab0 10c0d250 111cd0cc
Oct 7 20:11:39 wlc-1 WLC-1:
There is already a bug for it: CSCth64522
And for:
Oct 7 20:11:50 wlc-1 WLC-1: *osapiReaper: Oct 07 22:11:50.913: %OSAPI-6-FILE_DOES_NOT_EXIST: osapi_file.c:348 File : /proc/755/stat does not exist.(errno 2)
Oct 7 20:11:50 wlc-1 WLC-1: -Traceback: 105eaae4 105f4d44 105f7848 105fa648 105f3ab0 10c0d250 111cd0cc
Looks like it's matching CSCtf39550
Both bug fixes should be included in the next 7.0 release and should not impact the WLC behavior.
Hope this helps...
Similar Messages
-
Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?
What's more, they don't even show on the bluetooth devices list..
-
HT4623 after doing a update I got an error message and now itunes will not reconize my phone
all I can see on my phone screen is the itunes logo and the connector picture and when I plug it into the computer, itunes doesn't reconize it...
This happen during a updateTry the troubleshooting steps in item #5 at the bottom of this article: http://support.apple.com/kb/TS1538, under "If the device is not recognized while in Recovery Mode".
-
hello
I have install photoshop CS4 ( 11)
but when I try to install last updates it show me am message ( Adobe Photoshop CS4 not installed ) ?!
but its installed and I use it ><
see AttachmentPlease do not use the post title to post the entire question (no offense, it just makes the forum look ugly). As for your question - you really did install it? I mean with serial and install disc? If so, the update would work, because it would find the proper install info. That not being the case, there are a few things that may be wrong:
- due to you language settings, the installer cannot find the folder because it has a different name (though on Vista, that shouldn't be an issue)
- at some point, you used the CS4 Clean Utility/ Script to remove install info
- you are using a pirated copy that you may have bought on eBay or elsewhere that has a modified installer to circumvent licensing
- you are using an unlicensed version a "friend" gave you and that never was installed, but merely copied to the harddrive
That pretty much covers the immediate options, now it's up to you to tell us, which one may apply. Assuming, we are talking about perfectly legit software, re-installing it from the original media should take care of the problem. For illegal software, you should understand, that you are utterly on your own and nobody will help you, much less on the forums of the company producing the software.
Mylenium -
I just updated my 3GS to 5.0 and most of my apps and contacts disappeared. THis has never happened before through many updates. How can I get it back to where it was?
I did a restore from backup but that did not change anything.
I can see my apps in iTunes - it is like the update got some apps but not all, no contacts.
Total waste of my Friday.
What steps can I take to bring the phone back.
I know Steve is not smilingI got my contacts back by doing another restore! Relief..
But only a very few odd apps are showing up on the 3GS
Any suggestions? -
`I was updating ipad 2 to ios 5 it downloaded and was updating and update stoped in betweend and right Now when I am restarting my Ipad 2 it is showing i tunes logo and it's also not getting detected in itunes. Please help
Hi Demo, thank you for your suggestions.
I've tried updating in the following conditions:
1. "Over The Air" at one location;
2. On a Windows computer running the latest version of iTunes at the same location;
3. On Mavericks (10.9.4) running the latest version of iTunes (11.4 (18)) at another location;
4. On Mavericks, latest iTunes over a VPN with a server location in US;
5. On Mavericks, using a 3G connection shared from an iPhone;
6. On Yosemite developer preview with a previous version of iTunes at the same location.
I got the same results in most cases except for an occasional error with code 9; I'll try again in other conditions.
Interestingly enough, I've successfully updated my devices to iOS 7.1.2 and to iOS8 GM without any issues at the same location but, of course, no two conditions are exactly the same -
I got a request from apple to update my itunes and while uploading the update, the program gave an error message and now I can not open my itunes and fear that all my music etc is gone? what do I do to correct this problem?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?
Right click the heading at the top of the message list and select From from the list of options.
-
How to I get my contact names to show up in messages and phone calls?
My contact names have stopped showing up in messages and phone calls. How do I fix this problem?
Did you change your region settings recently? (if so, set it back to the region you had before)
Have you checked to see if your contacts are syncing properly in iCloud? (do the contacts match what you have online?) -
Anyone have problems with apple ID's? I have the correct ID in my settings but when I try to update my apps my ID shows my first name and last name but not my ID? I'm not sure what else to do because I've made sure I have the correct ID in my settings! Anyone else have this issue?
I think its meant to show your name, not your ID.
-
my outlook keeps showing an error message and prompting to close, what do I do?
http://www.microsoft.com/mac/support
for support for Microsoft products. -
hp pavillion p6000 series
hp dvd rw ad-7251h5 sata cdrom
i have error 39 message and my dvd is not showing up in my computerHi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Vista
Check if the drive is now working.
If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I need help, I pluged my iphone to itunes and got a message that said there was an update to download and update, I did but when itunes was rebooting and updating I got an error message. and now the phone is telling me that it cant be activated, to plug it in to itunes or to contact support care.
That message usually indicates that your phone was hacked to unlock it from the original phone carrier, then when you updated or restored it locked back to that carrier.
-
new iPhone 6 plus 128 GB upgraded from 4S, continues to show iCloud backup message and won't allow me to upgrade software to iOS 8.1
Glad it helped. I can relate to not bringing your A game... I had (minor, outpatient) surgery this morning. I'm still in Percocet happy land. LOL
Hope the small feels better. -
I manually add my songs to my iphone, after dragging it from itunes, it shows the syncing message but the songs do not show up on the ipod. I was able to copy songs successfully before. Please help.
Now title changes are showing up on my iPod, but not artist and album changes
Maybe you are looking for
-
What's the best technique for making this page work?
Here's a link to a jpg showing a design for a portfolio site that I'm building: http://i287.photobucket.com/albums/ll130/Mickmastergeneral/test_modeling_texturing.jpg The image of the ATV will be a Qucktime file; the visitor will be able to scrub the
-
Download Internal Table in CSV format it gets downloaded in single column
Hi All I am converting Internal Table in CSV format using the FM CONVERT TO CSV FORMAT and then downloading data using GUI_DOWNLOAD FM. I have given separator as ','. However when I download the data the file is opened in Excel and first 2 to 3 colum
-
The pdf file you selected is not currently supported
I keep receiving this message when I try & use the fill & sign option on documents. It was not happening yesterday. What would cause this issue?
-
How to set a default home page in Safari
Is there a way to set up a default home page in Safari so that when I launch it, it will always go to that page first?
-
Failed To Turn On - Bravia KLV-32R402A
Hi. I have a Sony LED Bravia KLV-32r402A.My TV is failed to turn on. This is the chronology.1. Turn on the TV.2. Sony Image appears3. Turn on for less than 1 minute.4. Off immediately.5. Indicator Light blinking 5 times. I read some references on the