Updater having errors

I'm running CS3 (its old, I know, but I'm short on funds right now) and when I run the updater, I receive this error -
"No internet connection was found.  Please check your internet settings or firewall."
Now, I know I'm connected to the internet (this is evident because I'm posting this thread. ), and I looked through my firewall settings, and nothing seemed to be wrong (but don't take my word for it.  I'm not very experienced with networking stuff).
Would anyone have a possible solution?  Thanks in advance.

It will be helpful to know your operating system version, whether it's 32 or 64 bit, and a little about your computer and networking setup.
You can, by the way, download updates directly yourself and run them from here:
http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
-Noel

Similar Messages

  • Has anyone a solution to two update having the following popup-"We could not complete your request.  There was an error in the App store.  Please try again later.?"  I've tried over 4 days without any change.

    Has anyone a solution to two update having the following popup-"We could not complete your request".  There was an error in the App store.  Please try again later.  I've tried over 4 days without any change.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I'm having problem downloading the complete suit. Only 41% has downloaded and it says this "Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support

    I'm having problem downloading the complete suit. Only 41% has downloaded and it says this "Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support

    Meresianak73703965 have you utilized the steps listed in Error "Failed to Install" Creative Cloud Desktop application to reinstall the Creative Cloud Desktop application?

  • Having trouble with itunes update.  Error with itunes64.msi. Windows 8.1 64 bit.  Thanks.

    Having trouble with itunes update.  Error with itunes64.msi. Windows 8.1 64 bit.  I tried uninstalling, but I am stuck now trying to reinstall.
    It says itcan't find the itunes64.msi destination folder.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

    Hello,
    I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
    I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
    Failed to install the new preview build, please try again later. 0x80246007
    What could be the problem?
    Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
    for this VM. Now that I have this 80246007 error code.
    When looking up System log, the following error messages are listed multiple times:
    Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
    The errors are returned for the Event ID 20 by WindowsUpdateClient
    in task category Windows Update Agent..
    I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
    registry key as suggested in Windows
    Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
    "BranchName"="fbl_awesome1501"
    "ThresholdRiskLevel"="low"
    "ThresholdOptedin"=dword:00000001
    Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
    However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.  
    Looks like Setup is having problems installing in a Hyper-V virtual machine.
    Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
    Any clue why installing under VM causes 9926 to fail?
    Thank you in advance.
    Well this is the world we live in And these are the hands we're given...

    Hi,
    According to the error message, this problem seems like update package installation failed during system upgrade.
    You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
    On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
    Roger Lu
    TechNet Community Support

  • Potential Windows Update database error detected 0x80070490

    This is the response I get when I run the Windows update troubleshooter from the Windows 8.1 Action Center.  If I click next it reports the errors have been fixed.  However if I run it again it reports exactly the same errors.
    After searching the Internet I have found that several users have reported having this issue.  As result of the aforementioned search I have tried the following:
    1) Run the Fixit tool for Windows 8.1 located at:
    http://support.microsoft.com/kb/971058/en-us.
    2) Run the System Update Readiness commands: DISM.exe /Online /Cleanup-image /Scanhealth and DISM.exe /Online /Cleanup-image /Restorehealth located at:
    http://support.microsoft.com/kb/947821/en-us.
    3) Saved contents of C:\Windows\System32\catroot2 to a temp folder and then deleted contents of C:\Windows\System32\catroot2.
    4)Renamed C:\Windows\SoftwareDistribution to C:\Windows\SoftwareDistribution.old
    5) Restarted Windows 8.1.
    6) Verified that C:\Windows\System32\catroot2 and that C:Windows\SoftwareDistribution folders had been rebuilt.
    7) I then ran the Windows update troubleshooter from the Window 8.1 Action Center again and got the same response as listed above. The errors still exist and are not fixed.
    8) Finally, I downloaded Windows 8.1 Enterprise Evaluation and I did a completely new clean install of Windows 8.1 and without installing anything else (no updates, no software, no antivirus) the above errors appeared within minutes after connecting
    to the internet.  I checked using the Windows update troubleshooter several times before connecting to the Internet and each time no problems were found, but shortly after I connected the above errors are shown to exists.
    Any suggestions that will help fix this issue will be of great help.

    Did anyone ever find an actual fix for this problem?  I have a very similar problem.  I have gone through the same steps for fixing my issues with getting a message of problems found every time I run the Windows Update troubleshooter.  It
    continually finds what it says are Potential Windows Update Database error detected 0x800700D and says they are fixed, along with another message saying Windows Update components must be repaired and it says they are fixed as well.  However, each time
    I run the troubleshooter it finds the same issues.  I have no problems running Windows Update under Windows 8.1 and them all installing without issue, yet I can't download or update ANY apps within the MS store and like the problem above, when it looks
    for my apps it says it's having problems finding them and to try later.  If I try to download even a free app, I get an error message that something happened and your purchase can't be completed. Error code: 0x80096004.
    I have dug through everything I can find on this error message and tried changing my sign in on my laptop to a local account, created a new MS account to access the store and continue to get the same error message.  I have tried it with my Kaspersky
    Internet Security 2015 turned completely off.  I've also ran SFC scannow and there are no errors and have ran DISM which found a problem but says it was fixed.  After running it again, there were no errors.  I have no other problems with anything
    else (that I know of on my machine).  It is an Asus Q400A and came with Windows 8.0.  I ran all the updates and then upgraded to 8.1 through the MS store without issue.  I have installed all updates since upgrading to 8.1 and have absolutely
    no problem running ANY updates, but can't seem to access the store no matter what I try.
    If anyone has found a solution to this I'd appreciate your input.  Hard to believe MS would put out a product that has such a basic problem that has affected so many users and can't seem to come up with some resolution that doesn't require registry
    editing, running commands from elevated command prompts, and a CS degree to resolve--there are soooo many issues online regarding this kind of error and others related to running SFC and DISM...most ending up in their ultimate default answer....renew or reinstall
    Windows and all the updates....which still doesn't resolve the problem for many!  I've always been a PC guy, but I'm starting to like the MacBook Pro I picked for work related reasons with great hesitation.  I've wasted more time chasing this issue
    down than I all the time I've spent actually using the Mac without even a hitch!
    Thx in advance for any feedback....please no MAC blasting....at this point, it would be not well received!!

  • Update termination error in IW32 because of requisition flag change

    Has anyone worked on IW32 to change the requisition flag of a work order from never to immediate. I tried doing this using BAPI_ALM_ORDER_MAINTAIN. It works fine for work order having operation control key same for every operation. But if this control key changes for any operation, then the update termination error occurs and hence the requisition flag change does not happen.
    Thanks in Advance

    Excise invoice is generated in the back ground on creation of the Invoice
    Have you tried by changing the configuration so as the sytem not to generate excise invoice automatically in the background?  If so, were you able to save the billing document successfully?
    G. Lakshmipathi

  • HT5278 I have an iPhone 4, and I go to Settings, General, Software Update, and it says iOS 5.1.1 and I tap on the Install Now, and Agree, then i get the verifying update, and then it says "unable to install update, an error occured installing iOS 5.1.1

    I have an iPhone 4, and I go to Settings, General, Software Update, and it says iOS 5.1.1 and I tap on the Install Now, and Agree, then i get the verifying update, and then it says "unable to install update, an error occured installing iOS 5.1.1

    I have exactly the same problem.  iPhone 4S, never been jailbroken.  Not behind a firewall and it happens whether I am on my home compute (iTunes) or directly thru Settings_Update.
    Looks like loads of people are having the same problem - and as far as I can see, Apple's sole reply is jailbreak or behind firewall/ security settings/anti-virus.  None of those apply here!

  • File Not Found / Fade Update Failed Error -43

    I have been getting two errors all of a sudden when instigating playback in the Arrange window in Logic 9.
    File Not Found Result Code -43
    and
    Fade Update Field Error -43
    I have googled information on this and have tried the following:
    Used "Save As" and changed the name of the project file
    Removed automation at the start of 3 tracks where i have automated in a gradual increase in volume
    Gone to the Audio menu and selected "Delete Fade Files"
    None of the above have worked. I have not used the crossfade tool to add a fade to the start or end of a track, i have only created a fade effect by using Volume Automation.
    There seems to be other people having the same problem but i haven't found any with the -43 error code.
    Does anyone know what that code relates to?
    Have you any suggestions as to how i can get rid of this error?
    Thanks

    I recently had issues with a "File Not Found" error, though it was a different code #. (-61, or something similar.)
    I was trying to move a track from my old G4 and work on it on my Macbook Pro laptop.
    The problem turned out to be related to file permissions.
    Logic is not a network-friendly program, and OS X is hyper sensitive to permissions, so to access a file that was originally stored on another computer, I had to do two things:
    "Get Info" for the drive (it was not a system drive) that the original file was stored on, and check the box at the bottom:
    "Ignore Permissions on This Volume"
    From the user account on that computer, I then copied the file from the internal drive to an external firewire drive which also had "Ignore Permissions" checked off in the "Get Info" window.
    I could then access the file from my user account on the laptop.
    Once I did those steps, the "File Not Found" error no longer appeared.

  • HT1725 I am unable to download app updates.  Error windows said I must order from the Canadian iTines Store.  How do I switch from the US Store to the Canadian Store?

    I am unable to download app updates.  Error windows said I must order from the Canadian iTines Store.  How do I switch from the US Store to the Canadian Store? Using iPad2.

    Settings > iTunes & App Stores > tap your Apple ID: > View Apple ID > Country/Region
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • HT4623 Trying to update IPad to iOS 6. . . but get error message "Unable to check for update - An error occurred while checking for a software update

    I am trying to update my IPad 2 to the new iOS 6. . .but when I check ofr updates, I get an error message "Unable to check for update - An error occurred while chekcing for a sofware update"  .
    I have powered off and tried again . . .but it still cannot .  My Wifi is fine - and the IPad is plugged in.
    Are other people having these issues.
    I tried to log onto Apple support and got an DNS error message. . .
    Carrie Mae

    Could be the update servers are overloaded. Keep trying.

  • Adobe Flash Player Update Required error

    I have updated Adobe Flash Player and Reader but cannot launch a video or pdf - getting the Update Required error.  I have validated the versions to ensure they were in fact installed.  I have a Windows 7 Operating System.  Do you have any suggestions for a fix.  I have never had this issue in the past.  My daughter is also having the same issue with her computer.

    pamc007 wrote:
    getting the Update Required error.
    I don't know what this means; can you post the full error message, or even better a screenshot.  See http://forums.adobe.com/thread/1070933
    Also what is your Adobe Reader version and Flash Player version?

  • HT4623 Every time I try to update, I get a message saying unable to update- an error occurred while checking for a software update

    Every time I try to update, I get a message saying unable to update- an error occurred while checking for a software update

    im having a similiar problem but my iphone 4s is stuck in the recovery mode.. like every time i restore the phone to factory setting it redownloads the firmware but nothing changes. any ideas?

  • Keep having error issues while trying to install iTunes into windows 8

    keep having error issues while trying to install iTunes for windows 8 an Apple Application was not found error now.  Does anyone have a clue this is rediculous

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Ios 5 updating 3200 error

    ipad 1. windows 7
    having truoble updating
    help

    the error code is not even listed in the support page, it lists 3194 and then nothing else in the 3000s.

Maybe you are looking for