Updater software errors out...help!!

Pc is not seeing my shuffle. It's just flashing amber all the time. I want to run the software updater but i get the following error while the Install Wizard is running. Right at the very end a box pops up and says Error 1335 The cabinet file Data1.cab required for this installation is corrupt and cannot be used. Abort Retry Ignore. All you can do is hit Abort and it then says
I've downloaded it 3 times just in case. No luck. So i'm dead in the water right now.

Some links to check:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;310353
Also refer to this post:
http://discussions.apple.com/thread.jspa?threadID=438121&tstart=0

Similar Messages

  • The front camera on my iPod touch 4th generation is frozen. I cannot use it. Updating software does not help. This started right after I bought it, new from BestBuy. What can I do?

    The front camera on my iPod touch 4th generation is frozen. I cannot use it. Updating software does not help. This started right after I bought it, new from BestBuy. What can I do? When i go to the camera, it is stuck on a black screen. the only way to use my camera is through other camera apps, but if I try to switch it to the front camera, it freezes again.

    If you still have the problem after retoring the iPOd to factory defaults/new iPod then The iPod is likely defective and replacement is required.  You can make an appoinment at the Genius Bar of an APple store or take it back to BestBuy if within warranty

  • N70 updating Software error

    Hi,
    Im trying to update my software for my PC suite but for some strange reason it keeps saying ti can't detect my phone,
    On the pc suit management connection list it shows that the USB is connected to the pc and even says so to, it only says it ain't connected when i try to update, i've chosen the right mobile type and battery is fully charged and i still get this error,
    Please help ;

    What did the error say or number?
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Software errors out

    I purchased my PRS300 abount a year ago. The software error started after about a week. I contacted Sony Tech. Support and was told to un-install and re-install the software. After doing this procedure several dozen times, with no results, I contacted Sony Support again and was told that I need to purchase a new Sony computer for the software to work correctly.
    I resently sold the e-reader at a yard sale for $1.00. I will never again darken Sony's door.

    I’m very sorry to see that you were having issues with the install of Digital Voice Editor and received unsatisfactory technical support from Sony. As this is a user to user technical assistance forum, and you no longer have the product to troubleshoot, at this stage I would recommend to contact Sony’s Customer Relations team to officially log your complaint to Sony:
    http://esupport.sony.com/US/perl/contac ... mdl=PRS300

  • Iphone update (-37) error? help?!

    Hey so i have synced my iphone, i went to update and it was backing up and stuff for an hour and a half and then it came up with the message saying
    " An error occurred while backing up this iPhone (-37) Would you like to continue to update this iPhone? Continuing will result in the loss of all contents on this iPhone."
    I really want to update to ios5 but i reaally dont wanna lose all my stuff like my notes, texts, photos and stuff can any one help me out? i have tried three times and the same thing keeps coming up.
    thanks heaps
    xo

    First man up and admit, that itunes does not suggest, but tells you that update is available and you made a
    decision to download and update. Once you man up - think if you still under warranty. If that is not security
    software according to the link provided, it is hardware. So second try another network, may be your network
    has additional security or firewall. And third decide if it worth to you pay 149 for that phone or get it replaced.
    Unless your 3gs under warranty.

  • Internal Update Server Error Code help

    Error code in FlashInstall.log 
    [warning] 1407 12044 vs [warning] 1403 12030
    I am trying to figure out why my internal update server wont connect past the certificate handshake. I can get it to work with a self signed certificate from the machine name but am trying to build a solution for my whole organization using our Root CA with a custom name for the particuler site.
    Any information would be helpful or suggestion for an alternative to using the internal update server since it is near impossible to troubleshoot when i have no idea what these warning codes mean.
    Thanks,
    Xenon

    Now i am getting these in my log but no update is being applied.
    2013-10-10+17-32-25.523 [info] 1628 adobeupdate.domain.net
    2013-10-10+17-32-25.527 [info] 1629 adobeupdate.domain.net
    2013-10-10+17-32-25.530 [info] 1614
    2013-10-10+17-32-25.534 [info] 1615
    2013-10-10+17-32-25.537 [info] 1618
    2013-10-10+17-32-25.542 [info] 1608
    2013-10-10+17-32-25.546 [info] 1612
    2013-10-10+17-32-25.550 [info] 1620
    2013-10-10+17-33-8.143 [info] 1628 adobeupdate.domain.net
    2013-10-10+17-33-8.147 [info] 1629 adobeupdate.domain.net
    2013-10-10+17-33-8.151 [info] 1614
    2013-10-10+17-33-8.154 [info] 1615
    2013-10-10+17-33-8.157 [info] 1618
    2013-10-10+17-33-8.162 [info] 1608
    2013-10-10+17-33-8.166 [info] 1612
    2013-10-10+17-33-8.171 [info] 1620
    2013-10-10+17-33-9.762 [info] 1628 adobeupdate.domain.net
    2013-10-10+17-33-9.767 [info] 1629 adobeupdate.domain.net
    2013-10-10+17-33-9.771 [info] 1614
    2013-10-10+17-33-9.774 [info] 1615
    2013-10-10+17-33-9.778 [info] 1618
    2013-10-10+17-33-9.782 [info] 1608
    2013-10-10+17-33-9.786 [info] 1612
    2013-10-10+17-33-9.790 [info] 1620
    2013-10-10+17-33-11.84 [info] 1628 adobeupdate.domain.net
    2013-10-10+17-33-11.88 [info] 1629 adobeupdate.domain.net
    2013-10-10+17-33-11.91 [info] 1614
    2013-10-10+17-33-11.94 [info] 1615
    2013-10-10+17-33-11.98 [info] 1618
    2013-10-10+17-33-11.102 [info] 1608
    2013-10-10+17-33-11.106 [info] 1612
    2013-10-10+17-33-11.123 [info] 1620

  • Update software problem plz help

    Bought nokia N91 2 days ago and I tried to upgrade software but at end it said connection to phone lost and my phone crashed. After I changed battery it start working but I have same problem when I want to upgrade my phone. I tried 25 times but every time I got that error and I plug off USB cable.
    Please help me

    Have just done software download - gone to repair permissions and have got same message. Running on 10.3.9. Anyone any ideas as to what is going on here. Did NOT run repair permissions before the update (Yes I know I should have done). Could this be a factor. There are a number of other threads on this forum concerning this exact problem - but so far have found no explanation or solutions.
    Disk varified and reported OK. Mac seems to be operating OK. How does Disk utility "link" to Disk Management Tool?
    Any help much appreciated.
    Thanks

  • Updated software in Aperture HELP

    I recently updated the software in Aperture using the software update under the Apple Menu. I actually forgot what the update was for, but now when I open Aperture and it asks me for my registration /serial # in reference on the packaging. I put in my serial # and it now says incorrect serial #.
    Any help with why this not working now would be helpful. If anything, can I uninstall it and reinstall the original Aperture? If so what will I need to do to save my Library of photos???
    Thanks
    JW

    Ech. Good news is, your pictures are most likely untouched, and as long as you still have the vault, you can get them back one way or another. If you want to double check that your pics are still there, you can right-click on your library, go to "Show Package Contents" and then navigate through to see if all your images are still there. Just don't change anything while you're looking through.
    Try running through the steps in Aperture 3: Troubleshooting Basics . Odds are, one of those steps will get you fixed up.

  • HT1338 Cant update software! Please Help!

    My mac is still on 10.5.8. and it says its allup to date when i click on "Software Update". Please Help. I cant download anything because of how old it is.

    The online Apple store in the US is at 800-MY-APPLE. 
    Once you install OS X 10.6, and use software update to get to 10.6.8, you can install iTunes 10.7, which is very popular due to the iPhone 5. You can also continue upgrading to Lion (thru the online Apple store again) or Mountain Lion (thru the App store). Lion or Mountain Lion you'll need a minimum of 2GB, with 4GB of memory recommended.
    If you go to Lion or Mountain Lion, you may already know that Apple dropped support for PowerPC code in them. Many found after upgrading that Office 2004 no longer works, for example.

  • Dowloading 2.0.2 update but errors out about netwok timeout

    This has me frustrated tried several times but cant get 2.0.2 down at all, so i downloaded from server, installed through Itunes using shift restore pointed to version 2.0.2 and it killed my phone, had to restore back to 2.0.1, after reading the glowing reports about 2.0.2 I don't think I will bother, apple must get there finger out and do it right, paying top dollar for 3G and GPS and it doesn't work properly, failing that the phone goes back.

    Pirrett,
    It sounds like your connection to the server had gone out while trying to download the update. With a lot of apple updates, there are a ton of people trying to access the same server, and it might cause issues like you had. I would try it again now, or perhaps soon, as it may fully work this time. If you're still not able to download, you might want to reset your network, or see if you can download it from another network, to make sure that is not the problem
    Hope you get it figured out!
    -cody

  • In my Ipad 1 I am not able to see option to update software? please help

    Hello,
    I am trying to upgrade current iOS to iOS 5, but I do not see any option for software update in my iPad settings. is anybody aware how to bring it. thanks in advance!
    regards,
    Mahendra

    You only get the Settings > General > Software Update option after you have iOS 5+ installed on it - until then you can only update via your computer's iTunes.
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972

  • Content Cleared From iPod When Updated Software. PLEASE HELP!

    When plugging my 5th generation 30GB iPod into my computer, a notice popped up asking if I wanted to update my iPod software. I clicked yes and a little less than 10 minutes later, my iPod was supposedly all "updated" and "OK to disconnect." According to my computer, everything was updated and all of my content (music, movies, photos, podcasts) was on my iPod. However, when I unplugged it from my computer, my iPod did not have any of the music, movies, or podcasts on it but it did have photos. I then tried restoring my iPod to the original settings but it didn't change anything. I have no idea what to do now and I am desperate for my music back on. I've only had my iPod less than a year.

    You're not alone:
    http://discussions.apple.com/thread.jspa?threadID=1235470&tstart=0

  • Cannot open documents in "PAGES" app since updating software. can anyone help???????

    cannot open documents in "PAGES" app since upgrading from original ipad 3 software to 7.1.2. can anyone offer suggestions please?

    Generally, you are more likely to get an answer if you post in the iWork for iOS forum at
    https://discussions.apple.com/community/app_store/iwork_for_ios
     Cheers, Tom 

  • I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

    I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

    yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

  • 6681 not getting detected by update software

    the 6681 is detected by PC suite but not by the update software..plz help me on this

    First go to www.nokia.com/softwareupdate and enter your product code (should be found on the back of the device) and check if there is any new SW upgrade for your phone.
    If no, then NSU might not get this.

Maybe you are looking for