Updater Software Problem

After installing the updater software and iTunes 5.0.1 I am in a position were my iPod is not being recognised by my PC, firewire or USB connection. When I try to start my iPod the Apple logo shows and then the connector icon and an arrow appear indicating connect to PC. There seems to be a few threads on this matter, is this an Apple fault?

Up unitl yesterday all was fine, it has worked for a year. Then I install the latest iTunes and update software and I'm in this position. I have uninstalled and reinstalled the software with but still the same problem.

Similar Messages

  • Updating software problem

    hi...
    i ve nokia N78.
    during updating software i unpluged my device with data cable unfortunately...
    now i am facing a prob: when i power on my cell phone it just show black screen and than becomes off automatically after 10-15secs.
    plz help me regarding this prob...
    thanx
    Moin

    /discussions/board/message?board.id=topfaq&thread.id=112

  • Update software problem plz help

    Bought nokia N91 2 days ago and I tried to upgrade software but at end it said connection to phone lost and my phone crashed. After I changed battery it start working but I have same problem when I want to upgrade my phone. I tried 25 times but every time I got that error and I plug off USB cable.
    Please help me

    Have just done software download - gone to repair permissions and have got same message. Running on 10.3.9. Anyone any ideas as to what is going on here. Did NOT run repair permissions before the update (Yes I know I should have done). Could this be a factor. There are a number of other threads on this forum concerning this exact problem - but so far have found no explanation or solutions.
    Disk varified and reported OK. Mac seems to be operating OK. How does Disk utility "link" to Disk Management Tool?
    Any help much appreciated.
    Thanks

  • After updating software problem

    I update my nokia asha 305 software 3.91 to 7.42 & it can not play any videos, it says video quality too many high only audio play.Plz help... My email id is [email protected]
    Moderator's Note: The email address was edited out. Please do not publish personal information in a public forum.

    They are aware of this issue and its been worked on.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • 3110 classic updated software problem

    i updated my phone software to the latest version 7.
    But it doesn't work properly, i cant use chinese language.
    It just supported english and arab language.
    How can i solve it?
    change version? how?
    pls and thx

    Hi,
    The reason for the MMC prompting to format is because the MMC might be corrupted or you might have used the MMC in a different handset. To overcome this try formatting the MMC by inserting it in another Nokia S40 handset &also try using a different MMC in your handset  & check to confirm if it is a concern with the MMC or the Handset.
    "If this post helped you solve your query, please do click the KUDOS tab."

  • Update software problem iphone 4

    Hello, I have an iPhone 4 on ios 6.1.2 and I wanted to make him an update on the new ios 7.0.4, I tried to do for setting> general> update, and I 'iphone snaps sought and found nothing
    then I tried to do the update via itunes and ca me out error 3004 while my itunes and my parfeux latest version and deactivated 

    Read and try this:
    http://support.apple.com/kb/TS1814

  • Problem with iTunes and/or updater software??

    I just bought a brand new 30gig iPod video. I followed apple's "instructions" and installed iTunes and the iPod software off of the included cd. I then connected my iPod and it charged but itunes never recognized it. Windows can find it (it appears as an external disk drive in my computer and iPod in other places) but iTunes doesn't recognize it at all. I have tried resetting the iPod, uninstalling and reinstalling iTunes/ipod software using the install cd, i have tried downloading the latest software from apples website and installing it that way, I have tried everything but restoring the ipod because the updater software won't even work. every time I try to use it, it just says "Service Error". I really have no idea what to do. The iPod seems to work fine, it turns on, turns off, windows seems to recognize it, but iTunes won't recognize the iPod and the iPod updater software doesn't seem to work at all. The last thing I am going to try is wiping my computer harddrive (it needs it for other reasons, not just this iPod problem) and starting completely fresh with nothing or very little installed besides iTunes and the iPod software.

    The article posted in the first response is a great place to start. If that doesn't work, try these out as well:
    http://docs.info.apple.com/article.html?artnum=61711
    http://docs.info.apple.com/article.html?artnum=93764
    Best wishes,
    CG

  • Updated to Yosemite, no problem.  now iPhoto and iMovie won't open.  Says I need to update software however, when i try to update indicates my User ID and PW won't work for these two pieces of software.  User ID and PW works everywhere else.

    Updated to Yosemite, no problem.  now iPhoto and iMovie won't open.  Says I need to update software however, when i try to update indicates my User ID and PW won't work for these two pieces of software.  User ID and PW works everywhere else.

    I am having the same problem.  I even changed my password and updated all of my security information.  Now it just gives me an error and retry message, which of course also does not work.  Went to support and was going to open a chat (seemed the simpler option) and received a message that my support has expired for this serial number unless I want to pay $29.00.  So I chose the option to call later, which was the exact time suck I was trying to avoid.  Why wouldn't the new operating system also update the apps that were already part of my old platform?

  • My MacBook Pro that is running on 10.6.8 won't update software so that iTunes connects to my iphone 6. Problem is that when I go to update, it restarts the computer but never updates any of the software.

    My MacBook Pro that is running on Mac OS X 10.6.8 won't update software that I need in order to download the newest iTunes software to connect to my iPhone 6. Problem is that when I go to update, it restarts the computer but never updates any of the software.

    In addition to Stedman's spot-on reply --
    When you buy an upgrade disk, all updates in that OS can be found on Software Update.
    For instance, I bought Snow Leopard at 10.6.
    All other updates have been free and downloadable.  So I'm not a 10.6.7.
    10.4 (Tiger) went to 10.4.11.
    10.5 (Leopard) went to 1.5.8
    10.6(Snow Leopard) is currently at 10.6.7.
    Now, when Lion come out (the next major upgrade of OSX), I will have to pay to go to 10.7.
    After that, updates are free til 10.8 comes out.

  • Problem Ejecting iPod Photo since updating software

    Can anyone help with my problem ?
    Just updated iTunes to 5.0.0.35. All seemed ok until I needed to update software on iPod (colour screen, 60gb) to 1.2 so I can use the camera connector I bought when I go on holiday.
    Now I'm having serious problems. I've had the pod for a few months and it's been great until now.
    I've been adding album art to iTunes albums. Now the pod with it's new software connects to itunes much slower and I seem to have lost songs from the pod. "Do Not Disconnect" message is continuously on pods screen. It won't disconnect from tunes and when I try to disconnect from PC using the safely remove hardware tactic, I get a box saying "The Device 'Apple iPod USB Device' cannot be stopped right now. Try stopping the device again later."
    I've tried everything, from safely removing it to right clicking to eject. The iPod is still stuck on the DO NOT DISCONNECT screen. The only way was to disconnect it then restart the pod using menu/select buttons together. But when I connect it again to the PC, the same thing has happened. Again, I've tried all sorts, from rebooting the PC to changing some options in iTunes.
    This all seems to be since I updated the software this morning (Sept 30). I've also tried resoring the iPod and starting all over again, but a soon as you connect it to the PC, it seems to freeze up with that same message on the screen. iPod Updater software said it "Couldn't Mount iPod connected".
    Please put me out of my misery. Boo Hoo............

    Cheers for that Mrsuknow,
    Unfortunately I don't have an 'automatically disconnect' check box under my ipod tab, or anywhere else in preferences for that matter.
    And the pod never finishes updating. It tries for a few minutes, then a message appears saying, Ipod couldn't be updated, file(s) not found. A load of exclamation marks appear next to certain songs in the iPod library. When I try to play any of them on the pod, they show as being there but won't play. They're still there on iTunes.
    And I've tried restoring factory settings again on the pod, but updater says it can't mount the iPod again.
    Boo.....

  • Nokia 5130XM: Problem with updated software versio...

    i have updated my nokia 5130c  xpress music with version v7.97. after updation i got that my music player's library updation speed get more faster then before but i have lost screen saver option and also lost power saver option. my music player also become unstable it take more time to change between tracks. net also gone slower. i request to nokia to release a new version of software with all the features like (screen saver, power saver and also with solution of all these problems).

    Friend i have nokia5130 also. But my problem is my set not supporting .jar format from few days. Can u advise me plz where from and how shall i update set's software? Plz tell me. I don't know how to update software.

  • Tried to buy Aperture 3 and got an error message Aperture can't be installed on "Macintosh HD" because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update.  Problem is, I had already updated my IMac to Lion OS

    Tried to buy Aperture 3 and got an error message Aperture can’t be installed on “Macintosh HD” because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update.  Problem is, I had already updated my IMac to Lion OS

    iPhoto 9.3 requires OS X 10.7.4 now. You can use your actual version of iPhoto or upgrade to Lion (or wait to Mountain Lion)

  • Hi,I have iPhone 4.later I buy this after 30 days home button is not good! Seller shop say update software do this,this problem will fine! I update 2 times,my version is 5.1.1 now! But my home button is not good! I buy and register 8.9.2011! Please help m

    Hi,I have iPhone 4.later I buy this after 30 days home button is not good! Seller shop say update software do this,this problem will fine! I update 2 times,my version is 5.1.1 now! But my home button is not good! I buy and register 8.9.2011! Please help me how I do?

    Where are you and where did you get the phone? All iPhones come with a 1 year warranty from the original date of sale.
    Make an appointment at the genius bar of your local Apple Store and take it in for them to have a look at.

  • Problems with my curve when updating software

    My computer crashed when my curve was updating software and now will not switch on.  The red light flashed at the top.  On a previous forum post advice was given that suggested that I should attempt to reinstall the software as I had been doing before and that would fix the problem.  However when I plug my phone back into my laptop I get a Window's message telling my that Window's does not recognize the device and that it is not working correctly.  The Blackberry desktop manager does not connect with the phone either.  I have only had this phone for 5 hours, please help me!

    1. You have a Curve (what exact model # at Options > About) or a Pearl? You posted in the 81xx Pearl section.
    2. What is the OS on the device you were replacing, if you recall?
    3. Disconnect the USB cable, Reboot the computer from off,  and try it all again.
    If still nothing, please post back and let's see what we can do.
    Please answer #1.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I'm having problem with my iphone4S first when i updated software to 7.1 after a month or so wifi turned grayed, second when i tried to turn off in the night as soon as i turn it on battery empty now its totaly dead. What should i do with it?

    I'm having problem with my iphone4S first when i updated software to 7.1 after a month or so wifi turned grayed, second when i tried to turn off in the night as soon as i turn it on battery empty now its totaly dead. What should i do with it?

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Maybe you are looking for