UpdateRules are in inactive state

Hi Experts,
      I have created a cube A with copy of cube B.
      Cube B contains 3 Update Rules.
      I have created same update rules to A, which contains cube B. and then transported these UpdateRules from development to Quality. But found them in inactive state and when i check STMS i find no transport error(import to Q is succesful).
thanks and regards
srihari

Hi
I think, you have not transfered the datasource for the cube A to Quality system. Please go to source sytem(RSA13) select the BW Source system, check for data mart application component, in that check whether the datasource for cube A is there or not, it will 8<techn name> of the Cube A. You must have the data source in the Quality system. If it not there, then prabably you have resend it along with the update rules.
Also, check with this funtion module. goto Tcode se38 and selec the following program and execute.
RS_COMSTRU_ACTIVATE_ALL
This program is to activate the communication structure. It may work..
Thanks
Vijay

Similar Messages

  • SCCM 2012 Clients in Inactive state

    Dear All,
    Recently non-active collection was accidentally deleted.In current state in our infrastructure we have around 6000 client machines out of which almost 5900 machines are under inactive state.If i check the agent time under properties it seems to be ok.I am
    done rebooting the servers and repair for the client systems also checked log files.But still the client machines are under inactive and count is increasing.
    Also the packages are stuck in waiting for content and in progress state. Also there are replication issues between sites how do i go about solving it.
    Require urgent suggestions on the same as to how to proceed further.
    Thanks...
    Regards, Mike ||Persistent Work Triumphs||

    Hi,
    I concur with Torsten, you need to find the root cause.
    Normally, the status will change once the clients send heartbeat again.
    Or, you could use the command below to trigger “Heartbeat Discovery Cycle” on the remote client.
    Invoke-WmiMethod -Computer xxxxxx -Namespace root\ccm -Class sms_client -Name TriggerSchedule "{00000000-0000-0000-0000-000000000003}"
    Client Schedule ID’s
    http://blogs.technet.com/mwiles/archive/2009/02/06/client-schedule-id-s.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Material Transaction and Move Transaction Managers are Going Inactive

    hi
    it was running previously but currently it becomes inactive.can any one tell in which table to look for the error related to this problem?
    Kind Regards
    Sayantan

    Hi;
    What is your OS and EBS?
    It was working before? If yes what have you been changed on your system(patch etc)
    Please check below note:
    Material Transaction And Move Transaction Managers Are Going Inactive [ID 93507.1]
    Material Transaction and Move Transaction Managers are Going Inactive [ID 98757.1]
    Regard
    Helios

  • Messages are in Scheduled State

    Hi
       some of my messages are in scheduled state. i  verified   SMQ1,SMQ2 . no queues are in block state. also  i  executed  register queues in sxmb-adm still they are  same state. how can i make them as successful state. only by restarting the messages or is there any other way? also tell me why these messages went to scheduled state

    Reddy,
    Can you please check this threads for possible solutions:
    Problem with scheduled message in SXMB_MONI
    SXMB_MONI - Message scheduled on outbound side (no queues)
    Regards,
    ---Satish

  • Business Area wise finacial statements - P&L, Balance Sheet

    Hi,
    My client has a requirement to have business area wise Trail Balance. In OBY6, business area financial statements tick has been done. So it is asking business area in cost objects. Plants are assigned to business areas. But still, I am able to post Balance sheet account to Balance sheet accounts without business area. I thought making business area mandatory for all G/Ls in OBC4. Then I have to write many substitutions  and  I may lose advantage of F.5D which gives business area basing on other P&L line item.
    What needs to be done?
    Can someone help me to suggest what exactly needs to be done to get Business Area wise Trail Balance.
    We have not activated document splitting functionality. Please suggest the way without document splitting and New G/L functionalities.
    Regards,
    Saidarao
    Edited by: saidarao G on Nov 22, 2011 7:47 AM

    Hi,
    You if want business area wise finanancial statements go to the this tranction code F.01
    Regards
    Mastan Reddy N

  • Indexes are in unusable state

    hi
    i am beginner....
    indexes are in unusable state...
    how can i make it actual state

    Maybe you can use
    alter index your_index_name rebuild online;?

  • Scheduled jobs are in released state only

    Dear Experts,
    we shedule jobs in background periodically. But for a particular time, all scheduled jobs are in released state only. Please suggest what might be the issue. Even some SAP std jobs have have not started.

    Hi Raghavendra,
    Have you checked enough BTC work process available in your SAP system.
    Use SM65 transaction,goto =>Additional Tests ;check mark "Determine work process status" and "Determine no of jobs in queue"
    and see the test results for any problems.
    Best Regards,
    Shyam Dontamsetty

  • Messages are in HOLD state

    Hello ALL,
    We have all messages processed sucessfully in Monitor but in "HOLD" state in the Audit log...EO is the QOS...Not sure why the messages are in HOLD state..There are atleast 15 receivers for this interface..ANy ideas guys..
    -Teresa

    Hi Teresa,
    Which SP do you work with?
    note: 813993
    "<b>If a predecessor has the "canceled with errors"
    status, further processing is not possible in systems
    before Support Package 11</b> for the adapter framework
    and Support Package 10 for the adapter framework core patch 02."
    last time we talked you were on SP4 so
    maybe you need OSS to handle this...
    unless you've upgreaded
    BTW
    Are you sure it's not EOIO?
    if it's EO then the predecessors thing doesn't make sense... wierd
    >>>" Can't award points--Forum error"...
    maybe they are changing our Martix...
    Regards,
    michal

  • SMQ1 queues are in stop state

    Hi All,
    My outbound queues from ECC to CRM system are in Stop state, I checked under qRFC monitor (SMQS) , queue is registered.
    When i go to SMQ1 and click on unlock the queues works but when the next entry gets stuck again.
    Any ideas to fix this.
    Thnx
    Addi

    Dear Addi,
    Please check your RFC settings - and the logical systems defined.
    Secondly, check the Inbound (SMQ2) and Outbound (SMQ1) queues on both systems, that will help you trace the reason of the error. Check Tx. SMW02 to trace BDocs messages if any.
    If middleware was working fine earlier then most probably RFC settings have been altered.
    Regards.

  • Bdocs are in intermediate state I01

    Hi all,
    When I checked SMW02 transaction,some bdocs are in intermediate state I01.
    I tried to reproces, but it's giving shortdump.
    Shortdump is trying to insert table entries, already exist.
    Bdoc type - CND_M_SUP
    someone could help me how to clear these Intermediate bdocs.
    Thanks in advance,
    P.V

    Hi all,
    I did not find anything in the condition log but this is the description of my short dump:
    Error analysis
        Short text of error message:
        Error in mass insert in table CNLCRMPRSCALEDIM.
        Long text of error message:
         Diagnosis
             You tried to insert entries in the database table CNLCRMPRSCALEDIM.
             This operation failed because one or more entries with the
             specified key already exist in the table.
         System Response
         Procedure
             Inform your support organization.
         Procedure for System Administration
        Technical information about the message:
        Message class....... "/SAPCND/DB_ACCESS"
        Number.............. 002
        Variable 1.......... "CNLCRMPRSCALEDIM"
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    Regards
    André

  • Deployments are in Active state on Cluster but in Prepared state on server

    Hi,
    We initially deployed our application (Oracle Identity Manager 11gR2) on standalone managed server and then convert it into cluster using wlst commands.
    readDomain('/app/oracle/Middleware_OAM/user_projects/domains/oim_domain')
    setDistDestType('JRFWSAsyncJmsModule', 'UDD')
    setDistDestType('OIMJMSModule', 'UDD')
    create('oim_cluster','Cluster')
    assign('Server','oim_server1','Cluster','oim_cluster')
    updateDomain()
    The cluster is created fine and we can start the application successfully and access it. However the problem is that all the deployments are in 'Active' state only under Cluster but in prepared state under the server oim_server1 (though application access working on managed server port). Please advise where we are missing and what could be the wrong?
    Thanks

    Hi,
    1. What if you are trying to access the application page, does it come up ?
    2. Use the below wlst command to get the actual state of the deployed application:
    The deploy command returns a WLSTProgress object that you can access to check the status of the command. The WLSTProgress object is captured in a user-defined variable, in this case, progress.
    wls:/mydomain/serverConfig/Servers> progress= deploy(appName='businessApp',path='c:/myapps/business',createplan='true')
    The previous example stores the WLSTProgress object returned in a user-defined variable, in this case, progress. You can then use the progress variable to print the status of the deploy command. For example:
    wls:/mydomain/serverConfig/Servers> progress.printStatus()
    Current Status of your Deployment:
    Deployment command type: deploy
    Deployment State       : completed
    Deployment Message     : null
    wls:/mydomain/serverConfig/Servers>
    3. Restart all the servers, instances, related DB and check if it helps.
    Thanks,
    Sharmela

  • Is rollup possible if aggrigates are in inactive stage

    Hi,
    Is rollup possible when aggrigates are in inactive status.
    Please give your valuble answers.
    Thanks
    sunil

    Hi,
    Its not possible. Actually when the aggregates are active, the will be pulled from infocube and stored in to the aggregates. if they are inactive no data will be pushed from infocube even after the load.
    Regard,
    jack

  • In "my Documents" my back/forward buttons are grey, & inactive. Joe

    when I open "My Documents" the back/forward buttons are are "grey" & non-responsive, how can I retreive them?       Joe

    Thank you Ken,
                               it still dose'nt solve my problem, if I open folders + folders to file, I still hav'nt Back or Forward = still grey & inactive, yet funny in Veiw=toolbars & to costomise, they're there green & active, but I can do nothing to solve my problem So so, what do you think?     Joe
                                                                                    Seosamh Ó hAghmaill
    Date: Tue, 3 Apr 2012 12:50:42 -0600
    From: [email protected]
    To: [email protected]
    Subject: In "my Documents" my back/forward buttons are grey, &amp; inactive. Joe
    Re: In "my Documents" my back/forward buttons are grey, & inactive. Joe created by Ken Binney in Dreamweaver - View the full discussion
    Welcome Joe -
    PC or Mac?
    Back and forward buttons on a window listng the files in it, will only work if you open a file within the folder.
    If you simply open your folder, there nothing to go "back" to.
    HTH
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4310848#4310848
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4310848#4310848. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Dreamweaver by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • My daq card PCI6025e' digital ports PA,PB,PC are in high state and cannot be changed even in MAX 2.1 testing panel and continuously output 5 volts even set for output.

    my digital ports PA,PB,PC are in high state and cannot be set low even if it is set for outputs.
    Thanks

    The MAX utility is the closest to the driver level and will eliminate software configuration as a possible issue. Please disconnect anything that you have connected to the DIO lines.
    Use the MAX test panel for your DIO lines, configure them as outputs, and set them to a low state. Use a multimeter (DMM) to observe the line state. If it is still high then you may have a problem with your hardware. If this is the case, I advise calling National Instruments support and investigate a possible RMA (repair).
    Best Regards,
    Justin Britten
    Applications Engineer
    National Instruments

  • Active and inactive states for a button

    Is there a way to assign a button action only when the playbacket is on:
    i.e. lable "play3"on timeline instead of placing a hotspot over each button with code?
    Basically an active and inactive state.
    button1 exists on entire 30 seconds then only active when playbacket hits and stops on "play1", "play2", "play3" etc..

    Hey there-
    Yes, you can do this with a little bit of code.  Take a look at the "state management" section in this blog post, which will describe how to set variables, get variables, and use an if statement to code some logic in.
    http://blogs.adobe.com/edge/2012/07/18/tutorial-leveraging-independent-symbol-timelines/
    Hope this helps,
    -Elaine

Maybe you are looking for