Updates failing to install and now RAW won't work

Just reinstalled Photoshop CS5 on a new computer... Photoshop is working fine until I imported new shots and tried to edit them in RAW.
Wouldn't read the data.
So ran all the updates.. only BRIDGE, EXTENSION MANAGER & ILLUSTRATOR updates have failed.
All it says is "There was an error downloading this update.Please quit and try again later".
I have... still hasn't worked.
And what's even worst is there seems to be no option to chat directly to Adobe.
This needs to be resolved now as I have a client waiting.
Any ideas?
Cheers

If you download these two updates for photoshop cs5
12.0.4 photoshop cs5 update
Adobe - Photoshop : For Macintosh : Adobe Photoshop 12.0.4 update for Adobe Photoshop CS5
6.7.1 camera raw update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
nothing happens when you try to run the two above updates?

Similar Messages

  • HT201210 Itunes update failed to install and now Itunes  won't run

    Itunes update failed to install and now Itunes  won't run

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please?

    I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
    You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod?

  • I just (10 minutes ago) downloaded an update to Firefox Sync and now it won't work

    A few minutes ago (10 November 2010 18:00 GMT approx) I downloaded an update to Firefox Sync after getting a prompt and now it won't work. It is not listed under tools as before or in the browser taskbar. It appears as a green jigsaw-puzzle-piece in my list of add-ons saying "this add-on will be installed when you restart Firefox". I have restarted FF about 5 times now and it still won't install. I have the most up to date version of FF.

    I assume Google toolbar extension is not compatible with Firefox 5.
    You can try this extension to override compatibility issues,
    * https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

  • I tried updating my Macbook Pro and now it won't work?

    I had OS Mountain Lion 10.8.2 for my MacBook Pro (version: late 2012) and I tried updating the operating system. The update was about three out of seven minutes in when a box popped up and said there was an error updating and that the process must restart. I clicked "okay" and waited for a couple of minutes but my screen was all gray and nothing else. I thought my MacBook froze, so I manually restarted it by holding down the power button and then pressing it again and now my screen is gray with the apple symbol and black coded text with writing such as "Unable to find driver for this platform", "Mac OS Version: Not yet set" and "System uptime in nanoseconds: 242856217", along with a series of codes such as " panic(cpu 0 caller 0xffffff8008c59241)". The screen is stuck like this and will not change. I have tried manually restarting it but it just keeps showing this screen. How can I fix this?
    Thanks in advance!

    Reboot your laptop while holding the alt/option key then I prefer you connect your laptop to an Ethernet cable because wifi gets slow . We'll, now choose the recovery driver. After that choose reinstall whatever software and just wait for a few hours for the thing to install and then your basically done hopefully no files will be earased since that is what I did and everything was perfectly fine no files lost, nothing
    Good luck

  • I just updated to mountain lion and now pandora won't work, videos won't work, i can't access my iTunes.... the list goes on. HELP!

    I recently updated to mountain lion and many of my most used programs won't work....
    pandora
    itunes
    hulu
    any vidoes.... says pop up blocked
    somehow I can't change any of my security preferences
    SUPER FRUSTRATING

    So what happens if you go to System Preferences > Security & Privacy > General? Are you able to go there at all? If you are able to go there, can you unlock the preferences using the lock in the lower left and your login name and password?
    If you are able to do this, can you change the "Allow applications downloaded from:" to Anywhere?
    Best of luck.

  • I updated my ipod touch and now it won't work but itunes says everything is fine. What should I do?

    I was updating my itouch that I got in September to the IOS 5 and everything went fine until the end of the update when it was creating a new back-up of the information on the itouch. When I saw that it didn't work and it told me to restore the previous bakc-up I tried that, but nothing happened. Itunes was doing a lot of work but my ipod touch didn't show that anything was happening. My ipod touch wants me to go back through the set up and when it gets to the part where you can restore a previous back-up I tell it to do that. The problem then is that it tells you to connect it to itunes and I do but the itouch doesn't seem to realize that it is plugged into itunes. Then I try to restore the old back-up form itunes and it immeadiately pops up saying htat it can't because of error: ipod (-50).

    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
    Above from:
    http://support.apple.com/kb/TS3694

  • I tried to update my 4s and now it won't work. Is there anything I can do? It's only 6 months old..

    I tried to update my 4s and now it won't work. Is there anything I can do? It's only 6 months old..

    Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808

  • HT201210 I tried to update my iphone and now it won't work at all

    I tried to update my iphone and now it won't work at all

    Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808

  • I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there.  I've uninstalled iTunes and reinstalled twice and it's not working.  Please help.

    I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there.  I've uninstalled iTunes and reinstalled twice and it's not working.  Please help.

    I have not had wifi since November when I upgraded to the newest IOS version.  I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again.  I kept doing what they told me and it worked for a couple more days and then I could never turn it on again.  My blue tooth doesn't work either.  I had to actually increase my data usage with AT&T becuase of this.  When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue.  My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!!  I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue.  Who knows how many people out there have had this issue and have not said anything about it.  Now there is a newer update that I can't do because it requires wifi in order to download.
    June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

  • I downloaded the latest update for my ipad and now it won't open.  the screen shows the itunes icon and a pic of the usb cable

    I downloaded the latest update for my ipad and now it won't open.  the screen shows the itunes icon and a pic of the usb cable

    That message means that you have to restore the iOS software because something went wrong. Follow the instructions here. I hope that you have a backup.
    iTunes: Restoring iOS software - Support - Apple

  • HT201365 I updated my phone yesterday and now it won't charge.  Is this normal?

    I updated my phone yesterday and now it won't charge.  Is this normal?

    Obviously not charging in not normal.
    But iOS 7 checks to make sure that the lighting connector is certified by Apple. All Apple Lightning connectors and most Lightning connectors from recognized third parties are certified. But some third parties shortcut the certification process and these cables may not work with your phone.
    If you are not using the original Lightning connector or a connector from Apple try that first.

  • Just updated itunes 10.5 and now it won't open at all please help me

    Just updated itunes 10.5 and now it won't open at all please help me

    Already a thread about this problem. Check to see if any of the given solutons here work for you.
    https://discussions.apple.com/thread/3381033?start=0&tstart=0

  • I have 2 ipad ist generations.  I updated one to OS and now netflix won't play on it but my nonupdated one still plays netflix

    I have 2 ipad ist generations.  I updated one to OS and now netflix won't play on it but my nonupdated one still plays netflix.

    I have the iPad2 with IOS5 and Netflix works fine with the Netflix application - I didn't try from Safari. 
    It shouldn't behave differently between iPad1 and iPad2.

  • I updated my iPhone 4, and now it won't let me download Apps. Why?

    I updated my iPhone 4, and now it won't let me download Apps.  When I try to download an App, it just keeps spinning/thinking, but nothing ever happens.  Help!

    Have you tried restarting or resetting your device?

Maybe you are looking for

  • Bought movies are greyed out

    I have bought various movies and TV shows via my Apple TV. They automatically sync back to iTunes but are greyed out so I cannot view then or transfer them onto my phone. Any help would be appreciated as I am new to the Apple TV.

  • Premiere Pro CC und After Effects Crashes

    Zuletzt protokollierte Meldung: <140735231746432> <GPUManager> <2> Sniffer Result Code: 3.

  • Light Table & Keyword Filtering - Bug?

    Here's my scenario. Project with say 30 images. 10 have the keyword "Monday", 10 the keyword "Tuesday", and the remaining 10, "Wednesday". Select them all, and create a Light Table from selection. So, I the Light Table 'album' I now filter all those

  • Event ID: 1021 after upgrating to SP5

    Hi, I recent upgraded to BES SP5 exchange, I now get the follwoing In Windows Server 2003 event viewer I get: Event Type: Error Event Source: MSExchangeIS Event Category: Connections Event ID: 1021 Date: Time: User:  Computer: server/Administrator wa

  • HT4623 Where do I find my passcode?

    Where do I find my passcode so that I can update is IOS 7.1.1 M