Updates for SAP N7.0 SP2

Hi,
I noticed that SAP NW IdM 7.0 SP2 is downloadable now. Is there any documentation in regards to the new features provided by this new service pack, esp. for the integration with SAP GRC AC 5.3 ?
Thanks,
Bin

SPS2 for SAP NetWeaver Identity Management 7.0 has been shipped on time on April 30th.
You can find the download link on the SDN page: https://www.sdn.sap.com/irj/sdn/nw-identitymanagement
This Support Package includes the following enhancements:
-     Integration with SAP GRC Access Enforcer 5.2
-     Connector for Central User Administration (CUA)
-     Identity Services (SPML support)
-     Enhanced Lotus Notes Connector
-     Password Hook for MS Windows domain controller
-     Various Enhancements to Identity Center and Provisioning Framework for SAP Systems
See the release notes for SPS2 for more details.
Together with the release of SPS2, several tutorials and implementation guides have been published on SDN:
https://www.sdn.sap.com/irj/sdn/nw-identitymanagement --> Overview Material / Information in Detail

Similar Messages

How to install Windows updates for Windows server 2003 SP2 Manualy

Hi All,
We have 10 machines running Windows server 2003 SP2. These machines are ISA servers kept in DMZ.
So these servers do not have internet access any any means. We are receiving Non compliance for not patching them for specific .NET framework patches. We have installed them but still the Scanning tools says it is not installed.
We have planned to check it through Windows update but as it is in DMZ there is no Internet connection and we also cannot push through WSUS server as well.
Is there any way we can get the update package in Bulk so we can manually patch them rather than manually downloading them 1 by one and installing them ?
Gautam.75801

Hi Gautam,
To achieve your goal, I suggest you set up a WSUS server on the disconnected network, then exporting updates and metadata from a
WSUS server on a connected network and importing all that information into the WSUS server on the disconnected network.
For more detailed steps, please refer to this article below:
Set Up a Disconnected Network (Import and Export Updates)
https://technet.microsoft.com/en-us/library/cc720512(v=ws.10).aspx
In addition, here is a WSUS forum below if there is any WSUS related question:
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverwsus&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Is Solution Manager mandatory for getting support for SAP 4.7?

Hi,
We received a letter from SAP regarding Solution Manager which stated:
"Commencing on April 2, 2007, SAP Solution Manager will be the only source from which customers receive maintenance updates for SAP NetWeaver 2004s and beyond, as well as applications based upon it (including mySAP Business Suite 2005 applications)."
We are still using SAP 4.7. We do not use Solution Manager. Does this statement mean that for getting any updates / support patches on 4.7, we will need to implement Solution Manager?
Can anybody clarify your understanding or SAP's stand on this?
Regards,
Ashish

To add to Dolores point, The link in market place...
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000689446&_SCENARIO=01100035870000000202&
The link also contains the SAP Tutor file explaining the process. Hope it helps you.
Br,
Sri
Award points for helpful answers

Could sap do mass craete/update for material master classification?

Hi Expert,
Now we craeted new classifcaiton for material master. It need be assigned to related many parts. May I query Could sap do mass craete/update for material master classification? How to do this ?
Thanks
Alice

Hi,
Another option is using LSMW, please refer to below thread for more details:
Classification view in MM01 with LSMW
cheers,

SAP EHP Update for Large Database

Dear Experts,
We are planning for the SAP EHP7 update for our system. Please find the system details below
Source system: SAP ERP6.0
OS: AIX
DB: Oracle 11.2.0.3
Target System: SAP ERP6.0 EHP7
OS: AIX
DB: 11.2.0.3
RAM: 32 GB
The main concern over here is the DB size. It is approximately 3TB. I have already gone through forums and notes it is mentioned the DB size is not having any impact on the SAP EHP update using SUM. However am stil thinking it will have the impact in the downtime phase.
Please advise on this.
Regards,
Raja. G

Hi Raja,
The main concern over here is the DB size. It is approximately 3TB. I have already gone through forums and notes it is mentioned the DB size is not having any impact on the SAP EHP update using SUM. However am stil thinking it will have the impact in the downtime phase.
Although 3TB DB size may not have direct impact on the upgrade process, downtime of the system may vary with larger database size.
Points to consider
1) DB backup before entering into downtime phase
2) Number of Programs & Tables stored in the database. ICNV Table conversions and XPRA execution will be dependent on these parameters.
Hope this helps.
Regards,
Deepak Kori

Cumulative update 5 for SQL Server 2012 SP2 is released

Cumulative update 5 for SQL Server 2012 SP2 is released
https://support.microsoft.com/en-us/kb/3037255
MDS related fix is:
FIX: The notification email link is broken when a special character is part of the URL in SQL Server 2012 MDS
http://support.microsoft.com/en-us/kb/3036201

Hello,
The following blog shows the latest builds (updates) available for each version of SQL Server.
http://sqlserverbuilds.blogspot.com/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SAPKD70024 SAP Update for 7.00

Hi experts,
could somebody be so kind and send me the SPAM Update 0024 for 7.00 (SAPKD70024) via e-mail? I really need to finish the new ERP2005 . i need the SPAM update but I do not have access solution manager system at the moment....
my e-mail is [email protected]
Thanks

Hello,
Unfortunately, for SAP NetWeaver 2004s and SAP Business Suite 2005 and beyond that are delivered after April 2nd, 2007 will ONLY be available via SAP Solution Manager's Maintenance Optimizer, implement Maintenance Optimizer is to have a smooth download process as this tool is mandatory for all new Service Packs and Patches released in future. you can go to http://service.sap.com/solman-mopz for more detailed information. If you need in a hurry, you can open a OSS message under component SV-SMG-MAI-APR
and they'll be able to help you to get it.
Thanks,
George Chang

Need SAP Segment Change or Update for LSMW

Our LSMW person is using a segment E1BPCHARACTDETAIL, in his LSMW Field Mapping. This segment is in an hierarchy that falls under E1CHARACTERISTIC_CREATE. Our LSMW person uses E1BPCHARACTDETAIL because he according to him it is the equivalent of BAPI BAPICHARACTDETAIL.Which makes sense.
The problem is that BAPICHARACTDETAIL has two more components/fields to map at the end of the structure. However, E1BPCHARACTDETAIL does not have these two fields, and it needs them.
Also, in WE31, E1BPCHARACTDETAIL uses segment E2BPCHARACTDETAIL000, and is the only version listed in the version window in WE31.
How do I get the two fields onto the end of E1BPCHARACTDETAIL (segment E2BPCHARACTDETAIL000), that is a subordinate of E1CHARACTERISTIC_CREATE?
Is there a newer version I can pull, or use somewhere? Di I get SAP access and dev key, and try to update the SAP segments on my own?
This uses basic type, in WE30, CHARACTERISTIC_CREATE01.
Any input is greatly appreciated. Thank-You
Edited by: TMM on Dec 11, 2008 9:31 AM

First of all get details of the vendor using BAPI vendor get detail and then update.
There is one bapi but this is online. BAPI_VENDOR_EDIT

Will Cumulative Update 12 for SQL Server 2008R2 SP2 fix: Warning: Unable to Verify TimeStamp for Path\ProgramName?

Hello,
I had a server crash recently and our outsource hosting tech support suggested applying Cumulative Upade 12 for SQL server 2008R2 SP2 to fix the issue. The exception from our dump file "Warning: Unable to Verify TimeStamp for Path\ProgramName"
is not in the list of hotfixes for this CU. Do you know if this will fix this issue? The CU warns not to apply the CU if your issue id not addressed by the CU. Here is a portion of the dump file with the relevant error:
This dump file has an exception of interest stored in it.
The stored exception information can be accessed via .ecxr.
(7e8.2ab4): Unknown exception - code 000042ac (first/second chance not available)
ntdll!NtWaitForSingleObject+0xa:
00000000`777412fa c3 ret
0:240> .sympath srv*c:\Websymbols*http://msdl.microsoft.com/download/symbols;
Symbol search path is: srv*c:\Websymbols*http://msdl.microsoft.com/download/symbols
Expanded Symbol search path is: srv*c:\websymbols*http://msdl.microsoft.com/download/symbols
0:240> .reload /f
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlservr.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlservr.exe
..........Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlos.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlos.dll
...............Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\opends60.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for opends60.dll
.......Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\BatchParser.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for BatchParser.dll
....Unable to load image C:\Program Files\Microsoft SQL Server\100\Shared\instapi10.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for instapi10.dll
*** ERROR: Module load completed but symbols could not be loaded for instapi10.dll
..Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\Resources\1033\sqlevn70.rll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlevn70.rll
*** ERROR: Module load completed but symbols could not be loaded for sqlevn70.rll
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
.................Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\ftimport.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ftimport.dll
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\msfte.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for msfte.dll
*** ERROR: Module load completed but symbols could not be loaded for msfte.dll
...........Unable to load image C:\Windows\System32\sqlncli10.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlncli10.dll
...Unable to load image C:\Windows\System32\1033\SQLNCLIR10.RLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SQLNCLIR10.RLL
*** ERROR: Module load completed but symbols could not be loaded for SQLNCLIR10.RLL
..Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\xpsqlbot.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for xpsqlbot.dll
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\XPStar.DLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for XPStar.DLL
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlscm.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlscm.dll
...*** ERROR: Module load completed but symbols could not be loaded for odbcint.dll
...Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\Resources\1033\XPStar.RLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for XPStar.RLL
Thank you,
Steve -

The error message appears to be related to a debug session and not come from the actual crash.
So all I know is that you hade a server crash. I don't even know exactly what that means. Did Windows bite the dust? Or was it only SQL Server?
Assuming the latter, I would expect the SQL Server errorlog to have some information (and that would be ERRORLOG.1 or earlier, since the server have been restarted), but if SQL Server died the output may be incomplete.
There may be also dump files, but as I rarely look into these, I am not sure how to interpret them. But I am quite confident that "Unable to verify TimeStamp..." is not the reason SQL Server went down.
I would suggest the following course:
* If the server is not critical, do nothing. As long as it has onlyl happened once, it has only happened once.
* If the server is critical, open a case with Microsoft if you are not able to figure out the reason yourself. The key here is "Unknown exception - code 000042ac".
* If it happens again, you should absolutely open a case. An important thing here is whether the stack dump is identical or something different. If the stack dumps are identical, you may have hit a bug in SQL Server or the OS, and applying CUs or OS
fixes could help if it is a known issue. If the stack dump is something else, you have ghosts in the machine - that is, bad hardware.
Erland Sommarskog, SQL Server MVP, [email protected]

New monitoring tool for SAP BusinessObjects Enterprise XI 3.1 SP2 & higher

Did you know that there is a new monitoring tool available for SAP BusinessObjects Enterprise XI 3.1?
It produces reports that summarise the SAP BusinessObjects Enterprise system landscape and its configuration, helps out with troubleshooting issues and points out areas of concern.
It also delivers a lot of help with troubleshooting issues via Wily Introscope monitoring dashboards, an 'investigator' and transaction tracing.
You can read more about it in this blog: /people/miles.escow/blog/2010/12/01/remote-support-component
Edited by: Christian Luehe on Dec 2, 2010 5:07 PM

Hi,
we support official IBM Tivoli and Mircosoft SMS.
Check google with "businessobjects enterprise monitoring" and you will find a lot of other vendors. maybe you find yours.
Regards
-Seb.

MSR 2.0 NWDS-eclipse project for SAP MI 7.0 updating issue

Hello,
I'm using NWDS 7.0 SP09 (based on Eclipse version 2.1.2) in order to changing the standard mobile application MSR 20 SR1 for SAP Mobile Infrastructure 7.0.
I have the original MSR.war that works fine but a MSR_eclipse.war version does not exists, so I need to know how to import the MSR.war application adding also all sources files correctly.
In NWDS I rebuilt the following MSR structure:
-application folder (including its JSP)
-customer folder (including its JSP)
-META-INF folder
-WEB-INF folder(*)
-home.jsp
-meRepMeta.XML
In WEB-INF folder(*) there are:
-application folder (including its view)
-customer folder (including its view)
-classes folder (empty, containg only properties files)
-lib folder (including mbscore.jar, mbsmake.jar, query.jar)
-srclib folder (including MSR.src.zip that contains all java source + msr.properties, msr_en.properties..)
-core.configure
-dataformat.properties
-settings.xml
-ui.properties
-web.xml
I succeed to build in NWDS in this way but when I export the first time and run the deployments, all .class files disappear and the MSR application doesn't work giving a 404 error, on the MSR home page, when I invoke the following URL: http://localhost:4444/MSR/start .
Could someone suggest me a method in order to correctly import/build the right structure of MSR?
Also have you any suggestion about the MDK configuration on NWDS 7.0 in terms of JDK version, ANT version and settings?
Thanks in advance,
GB

GB,
You should load the MSR_eclipse file in NWDS as that's the one which contains the source code.
If you don't have it, check the zip file which you downloaded from Marketplace, it should be there.
Chintan

Disable login prompt for SAP NW based Xcelsius Dashboard

Hi all,
Need assistance to understand what needs to be done in the below case:
Current scenario:
1. Developed Xcelsius Dashboard based on SAP NW Connectivity on BO XI 3.1 SP2+.
2. Configured trust between SAP BW server and BO Server using steps outlined in integration kit(login/accept_sso2_ticket, etc).
Imported user roles in BOE and enabled SAP authentication.
After this, WEBI Reports based on Bex queries refresh in Infoview without prompting for Login id/Password.
3. Configured SAP Server to enable portal/interop switch to display the Xcelsius Dashboard within Infoview which is the existing BI portal. Used Hyperlink object for enabling the link.
In the hyperlink, I am using the same link which gets generated when I use the option Xcelsius 2008>>file menu>>SAP>>Launch
Issue: On click of Hyperlink, I get SAP EP Login window. Once I fill up the SAP user id and password, the dashboard comes up
Server Configuration:All on same domain
SAP system ID=X(SAP BW server)
SAP system id=Y(SAP EP Portal)
BOBJ system Z(BOBJ Server)
User roles stored in X. Entitlement system defined in Z for SAP BW Server X.
Dashboard is not available in SAP EP Portal in any folder as of now. Have not created any roles yet.
As per the various posts and KB articles,
Do I need to enable SNC for both X and Y? or trust between Infoview and SAP EP portal can be enabled without enabling SNC?
Just like SAP BW server, does the SAP EP portal also has *.cert files that can be used to exchange with BO Server to enable trust.
Thanks,
V Fernandes

Hi Ingo,
Thanks for your explanation. I was referring the configuration mentioned in the wiki article for displaying Xcelsius Dashboard in Infoview where this was explained as a possibility. Even though its not Lean.
Link: [http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofanXcelsiusdashboardinBOE+Infoview]
The only difference in my case is the use of SAP Authentication instead of Enterprise.
Thus as per your last update the following workflow is only valid:
1. User logins to Infoview using SAP Authentication.
2. User clicks on Xcelsius Dashboard Hyperlink object.
3. SAP Enterprise Portal login pops up within the Infoview Workspace.
4. User has to fill in the Login credentials again.
5. Dashboard load up successfully.
Please correct me in case I am wrong.
Thanks for the response.In case there is any other way this can be achieved, then please do let me know. Appreciate for all the help.
Regards,
V Fernandes

HP Enterprise Integration Module for SAP - Windows Server 2008

Is there a download for the HP Enterprise Integration Module which will run on Windows Server 2008 for QC Version 10? HP Support has directed me to SAP Support for the Integration Versino 2.5 and above.

Hello John,
now I have a resolution.
I have deinstalled the MS SQL 2008 and install MS SQL 2005 plus SP2 at windows 2008 64bit VMware.
After reinstall HP Quality Center everything works fine.
( SQL 2008 is not official supported )
But there is another problem with the HP Enterprise Integration module 2.50 for SAP Solution Manager 7.0 EhP1,
the installer has a problem and does not work at windows 2008.
- this is a known HP problem and they should be published a newer version without the installer problem.
Today (april 6) I can't find an update, takes a while ... the "bad" version "setup_win.exe" has 132.327 kb.
you can only download the package from:
http://update.external.hp.com/qualitycenter/qc100/ent/enterprise_integration/index.html
you can find all add-ins at:
http://update.external.hp.com/qualitycenter/qc100/index.html
You should patch HP QC 10.00 with patch 10, see note 1329891 for details, takes 10 minutes or so.
With reards,
Michael

CPS parameters are not getting updated in SAP

We have recently migrated our SAP and CPs servers, after that we are facing few CPS issues and it is affecting lot of key batch jobs. One typical example is given below.
CPS is supposed to trigger a job DD simulation, by copying the SOURCE_DATE_ID -1-Dec-2006 and modifies the parameters BUDAT and FAEDA_HIGH. The parameter FAEDA_HIGH is calculated as time.now()+ 5 working days as defined in the expression. When we try to run the job today with the date 24 Dec 2010, CPS has calculated the FAEDS_HIGH correctly as 2-Jan-2011. IN SAP the variant gets created but for the field FAEDA_HIGH the date value is not getting updated properly it is display some other date. (e.g) It is showing as 4-jan-2011, I removed the xpression and gave another date for the FAEDA_HIGH field as 10/01/2011, but in SAP it is not getting updated.
Has anyone faced similar kind of issue. share you experience
Regards,
Ramprasad.

Hi ,
PLease find attached out XBP version
XBP connection pool for SAP system ISU
XMI interface version           : 2.0
Since we have taken backup and restored the SAP Database, the CPs transport file already exists in the System.
Basically what happens is
So actually what is happening is, the CPS parameter FAEDS_HIGH expressions are not used for due date calculation.. CPS just copies the source date-id to target id and similarly for the due date based on the difference
source_id variant date 01-12-2006   due date 02-12-2006 ( Next day)
Target_id Variant date 25-12-2010 due date 26-12-21010 ( Next Day)
I tried changing the Source date id from 01-12-2006 to 24-12-2010.
Source Variant date 24-12-2010   due date 04-01-2011 ( 10 Days)
Target Variant date 25-12-2010 due date 05-01-2011 ( 10 Days)
Regards,
Ram

LOVs not working in Webi Report for SAP BO 4.1 SP 2 Patch 3

Hello ,
I have developed reports and universes in SAP BO 4.0 SP 5 and i have migrated those reports to higher version of BO which is 4.1 SP2 Patch 3.
My universe is working fine with LOVs but when i run the webi report , the LOVs arent working.
have anyone facing the same issue. any idea why the LOVs arent working on higher version.?

Hi Victor,
The List of values we will assign in universe in order to get filtered data works on universe query panel
but the same objects when i am using in report(webi report) , the List of values are not working .i.e
they are not getting displayed in webi report.
for ex: i have country object having country names as LOVs and state objects having state names as LOVs . Now when i select Country value , the LOVs of state objects should get filtered and shows only states which belongs to country .
the above logic is not working in webi report , i am only able to select country and when i go for state, the state names do not get filtered.
please let me know why this is happening in the SP2 patch 3 version and its working fine for SP2 , but the chrome issue gets solved after applying patch 3 and not if we only upgrade to SP2.
the webi reports are not working in chrome browser if we using SAP B04.1 SP2 and lower version
but the LOVs are not working in SAP BO 4.1 SP 2 patch 1, 2,3.
kindly help me with the issue

Updates for SAP N7.0 SP2

Similar Messages

Maybe you are looking for