Updates keep switching from duplicate to extend display

I'm getting a little tired of this. I keep a lot of desktop shortcuts and I keep them arranged in a specific order. Only, every time Microsoft sends me automatic updates it switches me fro "duplicate" displays to "extend" displays. Which
leads to all my shortcuts being stacked up on one side, and 45 minutes of putting everything back where it belongs.
Thanks to the Blue Ray player, I can't just unplug the DVI cable, and I primarily use VGA so that I don't have to switch everything around when I want to use one of my other computers that don't have DVI options. And, YES, I logged in as "Administrator"
and changed things there.
So, either stop changing my settings every time you force me to update, or fix the stupid software that can no longer output Blue Ray video through the VGA signal. Don't even "try" to lie to me and say it's impossible, there was no problem
doing it back when my card didn't have a DVI output.
As it stands, you force me to get a DVI capable because, now that my video card has a DVI output, it is suddenly impossible to output Blue-Ray video over VGA. Then, even though both cables go to the same monitor, Windows 7 "insists"
that the 1366x768 DVI monitor is actually a different resolution than the 1366x768 VGA monitor. Then when I force it to duplicate the display (so I don't have to switch my monitor back and forth just to operate normally,) it decides that I must be mistaken
every time it updates.
f

So far it's happened after every update that requires a restart. If I restart my computer without an update, it doesn't happen. If I have an update that doesn't need to restart my computer, then I later restart my computer manually, it doesn't
happen.
The drivers for my display haven't been updated since I installed them. Just went through the update history to make sure. Checked all that were installed on 11/11/2014 (the last time this happened,) and scanned through all the rest - though
I don't remember which specific ones required a restart or not. Didn't see anything ATI (well AMD now,) in the list. Didn't see anything HP (for the LCD monitor,) either. Those usually appear under "optional" updates which don't
install automatically anyways.
f

Similar Messages

Switch from classic to Extended Classic Scenario- Impact

Hello,
We are proposing to switch from Classic to Extended Classic Scenario.
We are on SRM_SERVER 550,Sp7 and SAP 4.7 backend.
We want to know if this is technically feasible to switch and have less/no impact on existing transactional data and master data.
Main concerns are: Existing open Shopping carts and PO's.
We are also modifying the WF by including buyer completion WF.
Will the carts created in classic scenario and 'awaiting approval' work similarly in ECS?
Can we copy old carts (created in classic scenario) into new ones in ECS?
Are there any other issues like the ones above which people have come across?
Is there any standard SAP material/Consulting note available
which gives some guidelines for switching scenarios?
Regards,
Srivatsan

Hello,
You can switch from the classic to the extended classic scenario by making the global settings in the IMG.
But it would be better if you can decide if only a particular set of categories need ECS.
If you wish to have both the scenarios,the deciding factor is the product category.
You can also activate a BADI for the control of ECS despite the above Global settings.
Reward if answer is helpful,
Thanks & Regards,
Nagarajan

Why is my phone recieving messages and can make calls but will not send messages? my iphone keeps switching from 1x to 3g also..

my iphone is receiving messages and making calls but will not let me reply back to messages or go on the internet... It does keep switching from 1x to 3g also if that has anything to do with it? any help or people having same problem?

Hi Ashlygyrl - Let's get you back to business! May I have your zip code to reference the area? What model is your iPhone? Please try a soft reset by holding the Power and Home keys to restart device. I am eager to troubleshoot further with you!
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

CSS Designer keeps switching from the media query I want to edit to Global

CSS Designer keeps switching from the media query I want to edit to Global. How can I keep it in the same editing mode so that I'm not all of a sudden making global changes instead of confined to the particular media query?

I feel your pain. I see that using styles apply to the entire paragraph.
So I have a kluge until some really bright minds step in.
Open the Pages document that you need to edit.
Have in memory a single word that is in (red) in your desired font style.
Just type a word in (red), make your font color adjustments. Copy the (red) word into memory. Delete from the document. I put this in parantheses.
Paste the (red) word where you want to make an edit
Sample
I have to edit papers that require me to type red words into each sentence, sometimes several times per sentence.
Every time I write a word in red, the next time I click into the sentence (or anywhere else on the document), the color defaults back to black.
So let's say you want three edits. I am showing all three, but you'd just do it as you encounter things that need correcting.
Sample
I have to edit papers that require me to type red words into each sentence, sometimes several times per sentence (red).
Every time I write (red) a word in red, the next time I click (red) into the sentence (or anywhere else on the document), the color defaults (red)back to black.
Type directly into the (red) or double click on red and make your edit(s) one at a time.
Result
Sample
I have to edit papers that require me to type red words into each sentence (only those that needs correcting), sometimes several times per sentence (that sounds painful).
Every time I write (you mean type, not write) a word in red, the next time I click (with the mouse) into the sentence (or anywhere else on the document), the color defaults (reverts) back to black.

Remembering windows positions when switching from/to dual screen display

Hello,
Most of the time, a second LCD screen is plugged in my Macbook and configured as the main display. When I arrange the windows, I keep iTunes or my mail application maximized on the macbook screen and use the bigger external screen for all other windows.
If I unplug the external display, all the windows are of course moved to the laptop display. When I plug again the external screen, all the windows are moved to the external display. But I would like the iTunes and mail application to remain on the laptop screen.
Is there any utility to remember the windows positions and arrange them automatically when I switch from/to single/dual-screen display?
Regards,
Raph

Would DisplayWatcher do what you want? I came across this a couple of weeks ago but haven't had the chance to try it out yet.
- cfr

Switching from Classic to Extended Classic

Hello,
We are thinking of switching from classic scenario to extended classic as part of an upgrade from EBP 3.5 to SRM 5.0. Can anyone confirm whether it is possible, or whether we would have to re-implement SRM?
Any idea of how difficult it would be.
Thanks
AR

Hi,
Yes you can do it.
First you have to do the upgrade from 3.5 to 5.0
Then once your upgraded system is correctly working , you can change the configuration and switch from classic to ECS scenario.
Not a big deal
Kind regards,
Yann

Technical Scenario Switch: From Standalone To Extended Classic

Hello,
Currently we are preparing the system to change the technical scenario from standalone to extended classic (SRM 4.0)
While the Customizing steps are clear, it isn´t so clear how the data that already exist in the system will behave after the scenario switch.
Before the scenario switch, the purchasing department is closing all open SRM local purchase orders.
Someone has already done this kind of scenario switch?
What were the problems you encounter?
Regards.

Hi
Before talking about de-activating ECS or not in this BADI, this scenario must first be activated.
This is done via the customizing point "Activate ECS": just flag the check-box, and all you classic items (i.e. those for which a backend has been determined) become extended classic.
Here is the SRM - IMG path:
SRM Server --> Cross-Application Basic Settings --> Activate Extended Classic Scenario.
You can then fine-tune the scenario by using the BADI BBP_EXTLOCALPO_BADI.
Note- The BADI BBP_EXTLOCAL_PO_BADI can be used to activate the classic scenario based on the proguct categories .
You can choose to have the 3 scenarios working on the same SRM system depending on product category (standard) or any other business rule through the BADI BBP_EXTLOCALPO_BADI. The BADI is mandatory if you want the Classic and the Extended Classic to work together
Exactly, this BADI allow you to implement your own business rule for backend determination in a multiple Backends environment (Standard customizing is only based on Product categories)
As soon as you use BADI BBP_EXTLOCALPO_BADI , you don't have to use the ECS scenario activation customizing point (the rule is overwritten with the BADI result). The BADI BBP_DETERMINE_LOGSYS will only help in your case, if you have several Backend where to create PO documents.
PS: be aware that in ECS scenario you will no longer be able to create PR or reservations in R/3.
Other related links ->
Classic Scenanio and Extended Classic Scenario
Extended Classic vs Standalone
Re: Calssic or Extended Classic Scenario - BBP_EXTLOCALPO_BADI
Classic / Extended Classic Scenario for Shopping Cart
Do let me know.
Regards
- Atul

IMessage keeps switching from Imessage to text

I'll be in the middle of a conversation with someone and it will switch from IMessage to a text message. Why does it do that? Because sometimes when it does that I don't always get the messages when it switches to text messages.

I also have the same problem! Does someone from apple asnswer this? Are we being charge text message cost?

Videos willnot update after switching from manual flie management.

I had two libraries, one on my home PC and one on my work PC. I recently completed the enormous task of consolidating these libraries onto my home PC. On both my home and work PC I had iTunes set for manual updating of the iPod.
Last night I switched my home PC iTunes to automatic updating and it did this great.
For the music.
It erased all my videos, both music videos purchased from iTunes and personal vidoes that I had converted and installed to my iPod.
Here's the interesting part: The music videos I purchased from iTunes, including one I had just purchased 3 minutes prior to all this, were listed and available in my Music library but was not showing up at all under the vidoes tab of iTunes.
I could neither drag the videos to the video tab nor onto my iPod.
I believe I am using iTunes 6? Not sure what we are up to but I did not do the most recent iTunes update.
Help. Please.

Hello?
Anyone there? There's a billion smart people here. I find it a tad scary that no one has a clue.

SC history update problem:PO from PR not getting displayed in SC history

Hi
We are on EBP 3.5,Classic scenario.
PR's get created in R/3 backend and then are manually converted into PO.This entire cycle is shown in EBP SC history tab.However for some of the SC's we are seeing status only up to PR stage(PO no. is not getting displayed either in BBP_PD or check status txn).When we try manual status updation thru BBP_GET_STATUS_2,it throws an error saying,"these references neither GUID nor destination,thus could not be assigned to any system not even local system".
Has anyone faced such an issue.Pl reply
Regards
Sanjeev

Hi
I am not sure, is it happening for Catalog Item, free text item, or limit item in your case.
Have you tried executing report CLEAN_REQREQ_UP ? What all errors appear in RZ20 Transaction, when this dump happens. ? 
Please have a look at the following OSS Notes, which deals with the same symptoms, you told in your response.
Note 1005373 - BBPSC04: Purchase order details missing in history for STO
Note 728894 - Creation date of the PReq in the history
Note 989891 - BBP_GET_STATUS_2: Incorr quantity determination in back end
Note 1023706 - Follow-on Documents Show Wrong Net-Price and Net-Value.
Note 886099 - History: Short dump during the product conversion
Note 925480 - Short dump in history of a purchase order
Note 1006898 - Deleted vendor not displayed in Change hist of Shopping cart
Note 994379 - History page:wrong exchange rate is used
Note 725920 - Incorrect display in follow-on docs of limit shopping carts
Note 953238 - Shopping cart history in the sourcing cockpit
Note 949162 - Follow-on documents exist, status I1111 and I1113 active
Note 890859 - Status/shopping cart/error message without text
Note 927585 - GI slip and cancellation are missing in the history
Note 730239 - Check status: Missing Backend reference
Note 625121 - PO Ack not displayed in Check Status
Note 758522 - Check Status: Follow-on documents in the list and history
Note 532709 - Shop with Limit: Backend PO after requisition is not found
Note 515475 - EBP/BBP Status BE Requis.: Probl. with Limit / UoM
Note 555183 - EBP 3.0: Not all references found after 550783
Note 957957 - BBPIV03:doesn't find POs when deliv.date is set
Note 787786 - Archived PReq and reservations are missing in history
Note 812564 - The ordered quantity of the BE-PO is not read
Note 943679 - Termination or incorrect conversion after Note 812564
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Message keeps switching from iMessage to text

HHow do I get my iPhone to go back to iMessage, it somehow switched to text

If you have an internet connection, your iPhone will automatically send a text as iMessage (if you send it to iPhone users).

Automatic Windows Update keeps shutting off

I'm running windows 7 64-bit with Windows Defender, Windows firewall and ESET NOD32 anti-virus on a domain network. Automatic updates keep switching from automatic to manual mode several times throughout the day. Updates work fine, they just
don't remain in "auto" mode. I've tried the following to fix the problem with no luck:
1) Windows defender and ESET scans with nothing found
2) Numerous on-line anti-virus / malware scans with nothing found (Housecall, Malwarebytes, etc.)
3) Kapersky root-kit scan with nothing found
4) Windows update Fix-IT applied
5) All update services (BITS, Updater) set to autostart
Any ideas?

Hi,
I would like suggest you try the follwoing suggestions:
1. Boot into
Clean Boot Mode and test the issue.
2. Try System Update Readiness tool by referring to
What is the System Update Readiness Tool?
3. You may try to Reset Windows Update components for check.
Hope this helps.
Regards.
Spencer
TechNet Community Support

Lansdcape & portrait mode keep switching

I have 2 games downloaded from iTunes (Bejeweled & Sonic the Hedgehog) and they keep switching from landscape to portrait, without my intervention.
When I close the games, the menu flips to landscape orientation.
If I click on Cover flow the menu switches back to portrait.
Does anyone know how I can solve this?

I Just spent over an hour with support on this issue and apparently in iOS 8 they removed the option for the phones to lock in landscape mode. So, there is nothing wrong with your phone, unfortunately they removed a very useful feature. Maybe they will see if enough users want it they will fix it in an update.

Unwanted switching from BT to FON

My laptop keeps switching from my home BT to BT FON. I have to then manually switch back to my BT account - but by then I have lost my connection to work when I am mid conversation or livemeeting - and I have to put my pass key in again and log back into work. Really annoying.
Espeically as I did NOT opt in to BT FON.
Can I stop it doing this please?
Thanks R

Is this any help?
My computer connects to BT Wi-fi, Openzone or BT FON instead of my BT Home Hub
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

When I try to download 'Pages' from iTunes, an error displays 'Application Not Compatible. This application requires iPhone 5.0 Software Update' WHY? This keeps happening.

When I try to download 'Pages' from iTunes, an error displays 'Application Not Compatible. This application requires iPhone 5.0 Software Update' WHY? This keeps happening.

I sounds like you have the first generation (1G) iPod Touch with an iOS earlier than 2.0, Yu can identify your ipod here:
Identifying iPod models
You can identify your iOS version by going to Settings>General>About and look by Version. Yu can update ti iOS 3.1.3 (the lated for the 1G) by this link. It is a paid update. You may have to try another browser to get he sublink to work correctly.
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
What computer OS and version do you have and what version of iTunes is installed on the computer?

Updates keep switching from duplicate to extend display

Similar Messages

Maybe you are looking for