Updates not downloading properly after installing Mavericks

Hi there,
I downloaded and installed Mavericks without any problems on Monday, however all subsequent updates (for pages, itunes, keynotes, HP printer etc) are not downloading properly. The updates will start downloading from the App store but after downloading about 10M the update will finish downloading and "install". However when I check the respective programs it's clear the program has not updated properly and when I restart the App store the update once again appears in the avaliable updates panel. If I continue to update via the App store, by restarting everytime the update "installs", I can complete the update... which is a complete pain in the a**.
Has anyone else had the same problem?

Have you tried reinstalling the latest version of Chrome?

Similar Messages

App Store, Pages 5.0, Evernote, and other Apps will not fully function after installing Mavericks. What is the issue and how can this be solved?

Hello all, I could use some serious help on some major issues I have been having after installing Mavericks on my system (specs stated below). Never has a mac felt ever so rebelious and broken before in my lifelong period of using these systems. Anyway, after installing system 10.9, I had opened the mac App Store upon seeing that applications such as my iWork suite all had free updates. However, when I would attempt to navigate to the updates window, it would not respond to my various attempts. I then tried to get there by the system's menu bar and to my dismay, nothing would work when I clicked on it, not even the apple logo menu. I later quit the application using Command-Q and opened up the App Store by the apple menu option 'Software Update...' instead. Though it looked promising since the updates window did open, all update buttons or even '...more' info buttons were unresponsive. These same problems persisted even after restarting my computer. I had also attempted to see if repairing definitions would help by booting from the recovery start-disk and using disk utility but the repairs it carried out apparently had nothing to do with my issue. Finally, I was able to update to the new iWorks suite (which interestingly did not replace the iWorks '09 suite) by following the notification that asked about allowing automatic updates which I did.
Once trying to use Pages 5.0, I soon noticed that all I could do was merely type in a new document and change various options via key commands. Neither the inspector or top bar menus would respond to any place I click. Similarly, Evernote only starts up on the last used note and merely allows me to scroll through it. The top bar menus, the note select pane, and even clicking inside the note to input text are all not functioning and uninfluenced by any mouse clicks.
I have noticed other apps that will not respond to any sort of input, but I still have not explored all applications to know what the issues of each may be. However there are some applications that work such as Safari, Google Chrome, dolphin, iWork '09 including Pages '09, and others.
I do hope that I can avoid rolling back my system, but in the meantime, it has been quite the obticle course to use my computer for all of my school purposes.
Any help is very much appreciated,
Thank you!
DT
MacBook Pro 13-inch, Mid 2009
Processor 2.26 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Mac Pro will not sleep properly after installing new SATA BD-CD-DVD drive.

Hello and thank you in advance for time reading this.
I have been using a Mac Pro for 4 years and it never happened to me before.
This started almost immediately after installing a new SATA BD-CD-DVD Drive.
When the Mac is ordered to sleep, It shuts down 3 out of 4 Hard Drives
(I guess the one that doesn't is the OSX Drive) and It will not shut down the fans
and the display has no signal.
During that (when it won't sleep completely) the Mac is completely paralysed and it's unable to wake up.
Now, I've tried being patient and giving the Mac a ton of time to sleep.
In some cases it actually worked and the Mac did sleep completely and it was able to wake up,
but that defeats the purpose (being able to sleep and wake up in an in a few seconds).
In these few cases, the Mac took about 30 min to sleep.
In the rest of the cases the Mac never slept and I had to emergency shut it off from the power button.
In simply words, Mac falls into a "coma", not asleep but not awake at the same time.
As I said, this started exactly when I installed an SATA LG CH10LS20 optical Drive.
You may say that the Mac Pro does not support SATA for optical Drives.
This is why you should know that there is a SATA port on the motherboard of a Mac,
and with the correct method you can connect a SATA Drive AND be able to use it with out additional drivers.
http://www.tomorrowland.com/guides/mac-pro-optical-drive-install-part-1/
Now, you may say that If I'm so sure that it's the new drive causing the problem, why don't I disconnect it?
Well, please try to understand me, it's an all new drive and it cost a good load of money...
and other users of the same drive do not have that problem... yet...
Is there a way for the drive (which otherwise works fine) and the Mac to coexist and work properly?
Do you really think it's the new Drive?
Is the motherboard bothered somehow by the new drive and wont go to sleep properly?
Any kind of help is welcome and
I thank you in advance if you can help me.

Thanks for taking the time to respond RedBaron, I don't have a USB aircard in this system but I do have numerous firewire drives. I haven't unplugged everything yet and restarted. That's a good tip. I think I will try that to see if that is the problem.
Thanks again
Chris

Iphoto not working properly after installing snow leopard...

the two main problems are...
1) when editing in full frame, if I zoom in on the photo and try to move around with a two finger scroll, there is a big delay between me moving to where I want to be and the photo actually getting there.
2) when editing with "adjust," there is a delay when changing anything (such as highlights and shadows).
everything was perfect and happened in real time prior to installing snow leopard. when I called apple, I was told it was probably because iphoto is not 64-bit yet (would have been nice to have known that this would be an issue prior to the install). he said that if everything on my computer was added after snow leopard, I would probably be fine.
can anybody give me some advice on what to do here? I wouldn't mind going back to leopard if I can do that without losing everything, but am very open to ideas if anyone here has anything on this.
side note...safari seems to be having issues as well. takes a long time to load pages and sometimes won't be able to open them without closing out and reopening it a time or two. wasn't a problem before either.
thank you,
sean

I am having a similar(?) but perhaps distinct problem. My wife and I have separate user accounts on our MacBook. We were sharing the same photo library under Leopard with no problems whatsoever. Now, after installing SL, there is a strange situation. If I am in my account, and I import images from a camera into iPhoto, I am able to view and edit with no problems. However, when my wife launches iPhoto, she can see the event and the thumbnails in the event, but when she tries to edit the picture or even preview in iPhoto (clicking the space bar), the picture becomes a blank dark screen. If you hit add face while on the blank screen, the program can pick out the faces, but the picture is still blank.
If I try to import photos into the library when she is using her user account, the reverse applies to me. That is, I can only preview and edit pictures added under my account, and not hers.
I never had this problem with Leopard or with iPhoto '09 under Leopard. Any ideas what might be going on? I would think to go the genius bar, but I am not sure what they woudl be able to do about it. Thanks in advance.

Music not working properly after installing iOS7

What problem do I have?
1. Some tracks are not downloading
2. Some artwork is missing
What have I tried to do to fix the issue? (in no particular order)
1. Deleted all the music > sync > recheck all the music > resync
2. Checked and unchecked "Show All Music' in Settings
3. Logged out off iTunes and iCloud and logged back in.
I can see from some forum questions that this appears to be a common problem but can't find a solution.
Any ideas?
Thank you.

Uninstall check "Remove Preferences"
Reinstall. Make sure you have your serial numbers. If you have an upgrade, get the serial of the product you upgraded from.
If there are any questions, ask me before you go with the uninstall.
Gene

Media Manager not working properly after installing update

I have an 8110 and upgraded to desktop ver. 5.0. Since that time, Media Manager does not recognize the 8110 put pictures on computer.
What do I need to do to correct this?
Thanks.
Solved!
Go to Solution.

There is no need in Media Manager.
You can transfer files directly:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...

Macbook Pro not booting right after installing mavericks

I downloaded Mavericks on my 2007 macbook pro and after I booted it for the first time it has the apple sign, loading circle, and loading bar. After it is done loading it powers down, if i start it up again it repeats the same thing. Please help.

Hi, I had exactly the same issue last night on my Macbook Pro late 2011 model. Unfortunately, I could not find a way out of it. Has yours actually installed? Mine kept saying it was installing but then getting stuck and saying "error in install there is a problem with your hard drive."
Sadly, I found the only way out of it was to restore my Pro from my back up copy (which thankfully i'd taken 5 minutes before attempting upgrade.) Others might me able to advise you of more ways round it, but I took to the forums and read up and this seemed the only way to get my Pro back so I could use it again.
You need to get it to the screen to provide options to do this, so start in recovery mode, which I think is CTRL CMD, plus R button. It should then bring you up with a list of options and choose recovery from time machine.
I decided to wait until they've ironed out some of the clear difficulties with this new operating system.

ADF Faces EA15: table update not working properly after dialog return event

Hi,
in my application I have a table with read-only records and an edit button for each row.
The button triggers a dialog where one field of of the record can be edited.
The record is a bean which is put into processScope.
After accepting the change in the dialog the bean makes an update in the database changing the order of the records in the table on the launching page.
The return event triggers a re-rendering of the launching page (which I can see from the output of a phase listener) and the table model gets updated but the table output is not updated visually.
However, if I call the dialog on another record I don't get the record I see in the table but instead I get the record which I'd expected if the table re-rendered properly.
Do I have to trigger any kind of event on the table now so that the framework knows that a change has taken place and that the table has to be re-rendered? There is no difference whether I use PPR or not. It used to work in EA14.
Thanks,
Achim

In EA14, the return from the dialog required a full-page refresh (whether the dialog was launched with PPR or not didn't matter). In EA15, it's done with PPR if possible. This avoids the flash (and re-scrolling, etc.), but means you do need to tell us what's going to get changed because of the return. You can use partialTriggers on the table with the "id" of the button to make this happen.

My HP laptop not working properly after installing window 7ultimate 64 bit

This laptop is provided by UP Govt (INDIA). i installed windows ultimate 64 bit,2 days ago and installed all the drivers. But their is two drivers which is giving errors. these are
1)PCI Device- ERROR IS---The drivers for this device are not installed. (Code 28)
Hardware id is
PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01
PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C
PCI\VEN_10EC&DEV_5209&CC_FF0000
PCI\VEN_10EC&DEV_5209&CC_FF00
2)Ethernet Controller- ERROR IS--- The drivers for this device are not installed. (Code 28)
Hardware id is
PCI\VEN_10EC&DEV_8136&SUBSYS_3564103C&REV_05
PCI\VEN_10EC&DEV_8136&SUBSYS_3564103C
PCI\VEN_10EC&DEV_8136&CC_020000
PCI\VEN_10EC&DEV_8136&CC_0200
My main problem is that laptop is hangig too much continously. i dont know what is the exact reason and what should i do..Its not heating so their is null chances of heating effect.. I wants to get rid of this hanging problem.Pls provide me link for to download the genuine drivers and solution for this hanging problem..As it was not hangig earlier on Windows 7 home basic (provided by Hp)
This question was solved.
View Solution.

Hi:
Here are the links to the drivers you need...
PCI\VEN_10EC&DEV_5209:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&dlc=en&lc=en...
PCI\VEN_10EC&DEV_8136:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100079-2&cc=us&dlc=en&lc=en...
The only suggestion I can offer regarding the notebook not running so good is to download and install the amd chipset drivers from the link below and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

My Mail is not working properly after installing Lion

I just installed Lion and my mail is not working. It keeps asking me for the password and says it can not go online. All my mail folders have disapeard and with them my saved emails! Also the Back to Mac is not able to take my password either.

Ouch...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Isn´t keynote, numbers and pages free after installing Mavericks?

I tried to download numbers after installing Mavericks and it still shows it´s $19,99 price. Any work around?
Is there any special instruction regarding this?

Hi Dahveed,
I'm still confused i have the Mac versions of iWork 08 installed from DVD and still the app store is not offering me the latest version of iWork for free which is what the macworld article states below should be happening..
Is this a problem with the app store?
Regards
Alistair
If you don’t own iLife '11 or iWork ’09 apps (or v1 iOS apps), or own older Mac versions: On the iLife side, you’ll have to buy iMovie and iPhoto at full price ($15 or $5, depending on platform). GarageBand is free for everyone to download, though the app does offer in-app purchases. Apple’s iWork apps are each $20 for the Mac, $10 on the iPhone or iPad.

My Iphoto does not work properly, after downloading Mavericks. How can I fix it ? loading Mavericks

My Iphoto does not work properly after downloading Maverick. How can I fix it ?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

After installing Maverick, my downloaded movies will not play in Quick Time. It gives me the following error "You can't open the application "QuickTime Player.app" because it may be damaged or incomplete." What can I do?

After installing Maverick, my downloaded movies will not play in Quick Time. I receive the following error message:
You can’t open the application “QuickTime Player.app” because it may be damaged or incomplete. So I tried to unistall QT and I get an error that says, You can not delete this application as it is a requirement for the OSX.
Well I did find a way to delete it, by going into the various components and one by one deleting it. Now I reinstall it and the message is that this Quick Time is for an earlier version before Maverick 7. SMH....Now what.?

Hello, terrygav.
I would recommend processing a reinstall of Mavericks.
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/PH13871
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason H.

After installing "Maverick" update m Epson V300 scanner software does to work anymore. Epson does not seem to have a compatible driver

After installing "Maverick" update my Epson V300 scanner software does not work anymore. Epson does not seem to have a compatible driver (yet?).

It's not just scanners, my WACOM graphic tablet no longer works, am told by WACOM support that Maverick will not recognise it as it is too old!!! Worked perfectly with X 10.8 but not any longer - am well cheesed off as its going to cost me a few bob for a new WACOM!!! Thanks Apple

Updates not downloading properly after installing Mavericks

Similar Messages

Maybe you are looking for