Updates rules are not active when transported from developmet to quality

Dear friends,
I had made some in changes in strat routine in update rules BW development and saved in request and transported to qaultiy
se09-child request -parent request -
In bw testing I have activated the update rules and saved in different request but I now updates rules not acitve .
Please suggest me where ihave gone wrong ..
Regards
shekar reddy

Hi Sriram,
Download the below documents for reference related to Transports
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50b1d20e-c1e8-2c10-d9b9-d48eb3a83d89
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/205caa59-a948-2e10-b397-9ccafd3d4f5b
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2050db8b-9d90-2c10-2980-b13a4b0938f6
Regards,
Venkatesh

Similar Messages

Update rules are not active

update rules are not active when transported to quality.
what can possibly be the error. where to check and correct this issue ?
thanks,
Amit

Amit,
In your update rules ,i hope there some start routine of update routines couls be there and those rotines didn't transported successfully .Check your update rules in DEV
Regards
Prasad

0PS_C02 update rules are not getting activated when i install 4rm BI conten

Hi All,
In BI Dev. sys for PS module- Project System - Dates 0PS_C02 cube- update rules are not getting activated when i install from the business content and its giving the error " IC=0PS_C02 IS=0PS_DAT_PRJ error when checking the update rules Message no. RSAU461" .
I deleted the inactive update rules(6 nos) and installed again from BI Content, then the same issue raising.
Can anyone help me out as i stuck up with this to move to go-live.
Thanks,
Sakali

Hi Vassu,
here are some of the reasons for getting error in update rules activation.
1. Check the formula or routines that are used in Update rules and check is there any syntax errors.
2. check whether the mappings are correct or not.
3. check the info objects which ur used for mapping are in active or not..
(or) if the info object may be deleted which ur using for mappings.
Thanks
Sai Chand.

Transfer Rules not Activating when transported to QAS.

Folks:
We are on BW 3.5.
I have transported and activated the datasource in BW QAS.
But the Transfer rules are not activated in QAS.
I have transported the info-pakge successfully.
When I try to activate the transfer rules manually in QAS I get the following error message:
You do not have permission to create table /BIC/B0000116000
Message no. DT097
Is there a authorization issue here that is affecting the replication of the datasource?
Thanks
Denny

Folks:
I forgot to mention that the datasource is 0DIVISION_TEXT.
We are on BW 3.5.
I have transported and activated the datasource in BW QAS.
But the Transfer rules are not activated in QAS.
I have transported the info-pakge successfully.
When I try to activate the transfer rules manually in QAS I get the following error message:
You do not have permission to create table /BIC/B0000116000
Message no. DT097
Is there a authorization issue here that is affecting the replication of the datasource?
Thanks
Denny

HT1688 I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active.

I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active. What is that mean?

Razmee,
Guess what? After posting, I read another thread on this topic where someone said they went to an Apple store and the tech person there added the optional username and password in the Outgoing Mail Server boxes, and then reset the phone again. Although I had tried resetting and restarting a few times today, I had NOT reset it after entering the username and password into the optional fields.
When I entered my username and password into the optional fields, the iPhone entered checks (ticks) to the right of every entry; it had not done this earlier. (I didn't reset at this time, and the outgoing mail would still not transmit).
So just now, I reset it and the outgoing email was sent!
Thanks to you and this forum, it's a great ending to a few frustrating days.
I hope this message helps others. Not only does everything have to be entered correctly in the respective boxes; but once everything is entered and you press the "Done" button, every box should then have a check mark next to it and then you must reset the phone.

All applications are not responding when wake from sleep.

All applications are not responding when Macbook pro wake from sleep,
the keyboard and touch pad are okay.
Why?
Thanks a lot.

I want to see if there's a service that may be preventing it from working properly when waking from sleep. To test this, we'll need to Disable all non-system-critical services to see if the issue occurs.
If it does not, that means one of those services that was disabled, is causing the issue.
If the touchscreen is still unresponsive after sleep with all of those non-critical services disabled, then it may be something with the registry or the hardware.
Here are the steps to disable non-critical services:
Windows + Q to bring up Search
Type 'msconfig' and press Enter
Click the Services Tab
Check the Hide All Microsoft Services box
Click the Disable All button
Click Apply and Restart
Once it restarts let it go into sleep mode and then wake it back up from sleep mode and test the touchscreen. Do this a couple of times, if you have time. (When you're done troubleshooting, you'll have to go back into msconfig and re-enable all of those non-critical services, apply and restart.)
Let me know the results when you get a chance, please

Contract Prices are not changing when upload from PC to SRM

Hi all,
We have local contracts in SRM and downloaded this contracts to local PC. We changed price of this contracts and uploaded again into SRM, But the prices are not getting changed in SRM.
We downloaded in text format, opened in excel,changed prices and saved in text format.
did anyone faced this problem?
Thanks
Ravi

Hi Ravi,
please refer OSS note 734060. You have to use the commands D=Delete, U=Change and I=Insert to modify the downloaded document.
Rgds,
RRK
Reward Points for helpful responses*

Mail v. 6.0, the to, cc, bcc buttons are NOT active when I want to email to a group.

In my previous mail versions I was able to send emal to a chosen group, now these buttons are inactive and I must click on each person to send the mail too, very tedious. How do I get these buttons active again without having to go back to previous versions of mail or address book?

On your composing window, right click (cntl click) the toolbar and select customize. Drag the show address icon up to the toolbar (looks like a person). Click the icon and it gives you contacts and groups. Double click the group and it will fill in.

0Material is blocked by conversion when transporting from Dev to quality Bo

Hi All,
I am transporting omaterial , I had selected with data flow before option while creating the transport request , when importing the request i am getting the following error in the quality box" 0Material is blocked by conversion "i had already transported the table view ( t ocde osml)
Please guide me to resolve this issue .
thanks in Advance
suitable answer will be awarded

Hi Krishna,
Goto SE14, Give all the relevant tables one by one and Delete data and acivate.
1. SE14
2. Eneter table like /BI0/PMATERAL
3. On the next screen select the option Delete Data and Activate.
4. Repeat step 1 to 3 for all the other tables.
To find out all the tables:
1. Goto Se14
2. /B10/*Materal
3. press F4.
Hope this helps.
best regards,
Kazmi

3.x Update rules does not appear in std 0IC_C03 business content

Hi,
We are using BI 7.0.
When trying to install business content update rules for the cube 0IC_C03 (DATA FLOW BEFORE), the three update rules are not appearing in the screen for installation.
Instead , I'm getting three Transformations !! But I need 3.x Update rules only.
Note : The data source used are of type 3.x ONLY.

Hi,
When you Create the update rules manually by default Keyfigures will be set to no-update. You have to propose the rules as you want and it depends on the requirement. And for 0IC_C03 Inventory Cube, almost all the Kfigs are updated based on Routines.
So it is better to Install from BI Content.
Replicate your Datasources. Then Install Transfer rules,and then Install update rules.
Hope this Helps,
Regards
Karthik

Changes are not reflected when objects transported from Quality to Productn

Hi
In case of moving some Transport requests from Quality to Production, some times the changes made to the selection screen of a report program doesn't reflect in Production. Also we don't see any Transport error while transporting. Moreover, we can see the changes by regenerating the Program in production.
Would any one help me out in this with the reason for this.
Pls suggest what needs to be done.
Satish.

HI,
Thanks for the reply.
- I have checked the respective transport too, and every thing seems to be fine.
- Recently we went to go live, for the next release, so earlier before go live, we didnt faced any proble.. Only now we are facing this problem, that we find the changes relating to selection screen are not reflected when the object / prog is moved from qty to Prd.
- Only problem is with the selection screen.(not getting reflected in PRD. In Qty we are able to see those changes.
- Then in order to reflect these changes in PRD, we have to re generate the object, then only it get s updated..
Satish.
Edited by: satish c on Sep 22, 2009 3:35 PM

When I am trying to sign in to iTunes Store. I am requested to enter a password to the wrong Apple ID mail which does not belong to me... I can't connect to iTunes store and my Viber and Facetime are not active.

My Apple ID was disabled. I reseted it successfully. Afterwards, when I am trying to update the pending apps in App Store on my phone, in order to sign in to iTunes Store I am requested to enter a password to the wrong Apple ID which definitely does not belong to me ('[email protected]'). Of course, I don't know this password and, consequently, I can't connect to Itunes Store on my Iphone. As a result my Viber and Facetime are not active in the meanwhile. What should I do? Thanks in advance for kind help and solution.

Where did you get this iPhone?
Was it new or second hand?
You have to sign out then sign in with the correct Apple ID and password.
Settings > iTunes & App Store > Apple ID: > do it here.

HT3149 iPhoto 09 When I click on the preview pane to move a photo into edit, it shows up black and the edit buttons are not active. How do I fix that?

When I click on the preview pane to move a photo into the edit pane, there is no image just a black square and the edit buttons are not active. A few images in an event will move to the edit pane but most will not. I cannot work with those images that do not enter the edit pane..no attaching to email, make a card, slideshow, etc.

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Some pages of my website are not active from the home page

Built my website with iweb. When I go to the site the tabs to all the pages show, but several of them are not active from the home page. If I go to one of the active pages I can then click on the other pages. Is there a way to fix this? I've tried reloading the entire site, but several of the tabs remain inactive from the home page. Any help would be greatly appreciate - Thanks, Jodi

Thanks Roddy - I tried moving it down and it didn't work - That line is in the Template I used to build the site and is on every page. I did finally get the command A to work, but there's nothing covering those bottom three tabs.
However, when I put my mouse in the area of the box where it has my name (the image you sent me above) it shows a link desktop/site/booker_files and I noticed I have one of the rss feed blue arrows, but I can't seem to delete it. I wonder if that has something to do with it. It does the same thing on the website if you hover with your mouse.
Truly appreciate your help.
Jodi

IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

Updates rules are not active when transported from developmet to quality

Similar Messages

Maybe you are looking for