Updates rules inactive after add KF
Hi experts,
we have to add aditional key figures to a infocube that is already in Q and P systems (with data).
Now we are not being able to transport the update rules to those systems.
Correct me if i'm wrong but if you add aditional characteristic's or key figures you don't need to delete data in the infoproviders in the ohter systems.
we have already try to transport:
cube and then update rules;
all together cube and update rules
in both cases it fails.
thanks in advance for any sugestion
Varadarajan, our database is in SQL the spaces requirements that you refer are the same for this scenario? The fact table for this infop is 43G in Q system and our database have enough space.
am i making this analysis ok including the Db space?
Praveen the update rules are not datamart's.
The transport ends with a 8 code and for each update rule inlcude gives the message:
Update rules 2237DNCKOFJ13SFIK2PT581MQ read in version M
Error when activating update rule 2237DNCKOFJ13SFIK2PT581MQ
Sadeesh, all necessary objects are in the destiny system and no modifications were made at infosource/data source level.
Thank you all for the answers.
Similar Messages
-
No changes in Update rules even after changes in Communicatin struct
Hello All,
I have made changes to a transfer structure i.e. I added a field in the Communication structure and mapped in the transfer structure. I was expecting the update rule to be deactivated after this. But the Update rule is activated. Because of this I am not able to accomodate my new infoObject in the update rule. What might be the problem?
Regards,
KPHi KK PP,
Update rules are only pertained to Data targets,These helps to map the object to the Infosource using a rule.If you change the transfet structure or communication structure it will not effect update rules.If you add some object to your data target then update rules will be changed.
Regards
Karthik -
"update rules inactive " error when importing transport request
Hi experts,
I am stuck while importing transport request of update rules. I am moving transport request of update rules from 1 system to another and stuck while importing it in 2nd system. Only two update rules are stuck among all giving an error of "inactive update rules".
I have again tranported it twice after activating theose two update rules.
Please help!!!!!Hi Heena,
Can you provide more details of the issue like is it a DSO to DSO transformation, error message etc. -
UPDATE RULES INACTIVE WHEN BI CONTENT INSTALL
Hi,
When i activating business content update rules are not coming as active.
when i raise OSS note to SAP the following suggession given.
editing the UPDRs, and changing the update method from the Time Ref. tab.
how to edit update rules, from time Ref tab there is routine, for 0cal year/month i need assign source field in time ref. tab.
what is the code for it please let me know/ how to resove the issue.
unless i write the code / assiging the source field the update rules cannot be activated.
Thanks,
SakaliHi,
You can easily edit your update rules by getting into change mode.
Step 1: Double Click on your KF relevant Ty column
Step 2: After doing necessary mappings in KF Calculation Tab, Chars Tab
Step 3: Click on Time Ref Tab and again click on Method of your Time Char
You need to be careful about How you want to map your Time Chars. It depends on your business logic. Discuss with your Functional team or please cross check with your Blue print before you map any fields.
Regards,
Suman -
Update rules deactivated after transporting cube with zero elimination on
Hello,
The update rules were deactivated in the quality system after transporting the cube with the zero elimination flag switched on. However, the update rules in development were not deactivated when setting the zero elimination flag. So, the update rules in the "From" system were not deactivated. This only happened in the "To" System. Does anyone know why?
Thanks,
MaureenIf there is any change you did on cube, you need to re-activate your update rules.
Re-activate your UR and transport it. It should be ok.
Hope it helps.. -
Update Rules inactive-Log not found in main memory
Hi
I am trying to active update rules but it is failing with log not found in main memory.
I tried update rules syntax check and system says no error when checking the update rules.
What could the reason? How can I dig this further? Please advise ASAP as this is urgent.
Regards
VennelaCheck out if there has been any update error in VA02 using transaction SM13.
Lokesh -
Characteristic derived Update Rules
Hi guys,
I have to make the update rules for a DSO.
Among characteristics there is one that should by derived from the master data table of another characteristic. Even more, this attribute is time-dependent.
So, let's say for characteristic zstatus I:
<li>checked the Master Data Attribute of</li>
<li>selected the deriving characteristic zdoc</li>
<li>clicked the Time Dependency button</li>
<li>checked the End radio button</li>
<li>selected 0CALDAY from the Frm match code button</li>
<li>Closed all modal windows and activated the update rules</li>
After both, master data bearing characteristics and transaction data were uploaded, the results were far from what I expected to be, as you can see below:
<li>zdoc Master data</li>
Comp Code BP Ref. no Valid-to Valid-from Document_date Net_duedate Status
RO20 90000724 342342 11.11.2008 01.01.1000 21.11.2008 20.9.2007
RO20 90000724 342342 20.11.2008 12.11.2008 21.11.2008 20.9.2007 1
RO20 90000724 342342 31.12.9999 21.11.2008 21.11.2008 20.9.2007 2
<li>Transaction data [ DSO ]</li>
Comp Code BP Ref. no Document date Status Document Type Amount 0CALDAY
RO20 90000724 342342 5.9.2007 X 119,00 5.9.2007
RO20 90000724 342342 5.9.2007 1 I 119,00 21.11.2008
RO20 90000724 342342 5.9.2007 1 X 119,00 21.11.2008
Well, I expected the Status column in the DSO table [ the bolded column to get the value 2 after deriving the zdoc characteristic on 0CALDAY, during data loading process, however, it takes the value 1 in turn.
I'm not sure, I'm clear in my explanations...if there is someone who understood my pain, and tell me what's wrong with my update rules I would appreciate.
Kind Regards!After updating the data, did you perform a hierarchy/attribute change run or "activate" the master data for your lookup object? Also, check in the "Q" table of the master date lookup object, all of those records should be in the table and active.
Brian -
Two Update Rules populating One Infocube
Hi all
Im a little confused:
1) I have to add a characteristic to an Infocube.Which I did and also assigned it to an appropriate dimension.
2)There are two update rules populating the Infocube.
3)The new charcteristic that ive added to the cube has to be populated using a routine.
My confusion is that to which update rule should i add the routine to?whats the deciding factor? how do i decide?
I would like to have more details and preferably any document which clarifies such scenarios.
ThanksYou can do it using both update rules or...
Find out which are the related characteritics and write the routine in that update rule:
Ex
Cube has
Project | Activity | Manager | Team Member | .....
Update rule 1 :
Project | Manager |...
Update rule 2:
Project | Activity | Team Member | ....
and the added characteristic is Project Status and it makes more sense to add it to update rule 1 rather than update rule 2...
my 0.02
Arun -
Update Rules gets inactive automatically
Hello All,
After the transport of the Update rules with the related objects to the not modifiable system, everything works fine for some time. But after sometime many update rules gets inactive automatically. We hav'nt changed the Info provider or transported any thing.
We are in BI 7.0.Can any one help me to analyse this issue.
Thanks,Hi,
This problem may ocurs due to dependecies on the objects that you transported, any way you can activate them using the below Program,
Go to SE38
Run the program : RSAU_UPDR_REACTIVATE_ALL
Give the necessary details and execute the Program. -
Hello All,
i have added another dimension 0mat_unit to the existing infocube of multiprovider to create a report.
As i added new dimensions underlying update rules became inactive and when i try to activate them iam getting message IC=xxxx IS=yyyy error when checking the update rules.
can you please give ur advice to solve the problemHi,
When you add some new objects to your cube then you have to add them in your info source and data source in order to get correct data and if you dont want to populate data to them from source then you can have your own rules like routines and formulas so please add them to comm structure and transfer structure and map the rules and then try to activate them it will work,
Thanks,
Pavan.M -
How to add a new char in Update rule
Hi Gurus:
I copied update rules from an old cube. This new cube is a copy of old cube - almost.
One of the char is missing in the new cube when compared to old cube. There is a small update routine for that char which I need to introduce to new cube.
My problem is, I'm not able to figure out how to add the new char in the update rule & start the mapping process..
Thanks & RegardsDear Bhanu: This is what happened.
When I copied - it defaulted this char with what present in comm structure. Basically the old cube has a routine for this char...
And the position of this char in the update rule for chars..got realigned.
I'm sorry - I should have check it properly.
Thanks a LOT for your time & input...I will assign the points
Best Regards -
Add update rule for new key figure in one info struc
Hi, everyone
I would like to know how to add update rule for new key figure in one info struc.
Thanks ahead.
Eric1)I have created the update rule for one info structure
2)add one key figure in the info structure due to business requirement
3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
Can anybody tell me how to do with it?
Any answer will be appriciated. -
Error in update rules when trying to add a field
Hi Gurus,
I would appreciate if u could help me out.
I am trying to add the field Cumulative order quantity in sales unit ( 0CML_OR_QTY) in the update rule of 2LIS_11_VAITM. The field already exists in transfer rule and communication structure. When i am trying to add the field its giving and error message :No routine has been created for InfoObject BP:Business Partner Group (from Hierarchy) (data ield: Cumulative order quantity in sales units).
I have tried to make the BP field as initial value. But still the same error persisted.
Kindly let me know as to how to proceed.
Thanks & Regards,
KapilHi,
Are you creating update rules for a ODS or a cube. If it is an ODS please make sure that none of your Key Fields are referring to the routine.
Now first please add this 0CML_OR_QTY to your data target and activate it. Once you do that you will see that it will automatically come in the update rules and will be not assigned. Now once this is done you can assign the required value
Regards,
Pramod -
In my Pc I Cant update the photo stream after add an apple tv, why?
In my Pc I Cant update the photo stream after add an apple tv!
In my Pc I Cant update the photo stream after add an apple tv!
-
How do you add an entry in the monitor log from the update rules?
How do you add an entry in the monitor log from the update rules?
Check this link for relevant SAP recommended implementation.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0c22e690-0201-0010-9581-832abdb5d50d
Sample Code (Routine) available on the last page of the document.
award points if useful
Maybe you are looking for
-
Anyone having success at creating an alias under their icloud account? First the message was that the site was unable to save the alias. Now the message is that I have to wait 7 days due to canceling a previous alias (not valid as I did not cancel a
-
Logical difference ABAP InputScript
Hi, What is the logical difference between a "Call transaction using..." in ABAP and an InputScript? Thanks, Govindappa.
-
How to find resistance, capacitance, inductance of an unknown circuit
Hi, How to find resistance, capacitance, inductance of an unknown circuit or how to configure a LCR meter in LabVIEW
-
Uninstalling earlier versions of Lightroom and Elements
I have Lightroom V4.4 and Photoshop elements 12 upgrading from earlier versions. Can I uninstall the earlier versions without impacting the current versions? Many thanks
-
Download Reader 11 not recognized
Trying to upload pics onto Ebay. Keep getting message to download Reader 11. Downloaded it from Adobe website after attempting to do it while still on Ebay. Uninstalled Reader X. Re-started computer. Running Windows and IE 10. Help?