Updates to the Extensions Exchange and the new XSDs on the Oracle Wiki
I have just posted the following SQL Developer Forum
+<p>The Extensions Exchange has been updated with a number of new extensions including a few new extensions from teams at Oracle. You can download and install any of the extensions. Some of these are also available for download through the Check for Updates utility. Please note the disclaimer on that extensions page. None of these have been validated or tested by the SQL Developer team.+
The <a href="http://wiki.oracle.com/page/SQL%2BDev%2BSDK%2BHow%2BTos">Oracle Wiki</a> has also been updated to help you write your own extensions. A set of the most commonly used XSDs have now been added.</p>
Instead of singling out individual extensions, I'd encourage you to look at what is available on the exchange and remind you that you can create your own extensions, whether they are Java or pure XML. We have updated the Oracle WIKI with a few examples and finally have added a selection of XSDs. This has been long awaited so for those of you looking out for these, please visit the HOW TO on the Oracle Wiki.
You'll also notice that some of these extensions are showing up under the third party section in Check For Updates.
Sue
firefox 3.6 - http://www.mozilla.org/en-US/firefox/all-older.html
or you can find all the previous versions here
ftp://ftp.mozilla.org/pub/firefox/releases/
edit: replaced random unofficial download site link.
Similar Messages
-
Hi i haven't updated my iDVD seen 2005 and to get the new one i need 7.0.4 first and i downloaded it from the apple website and when i go into the updating process its says "An eligible iDVD application was not found in the location /Applications." why
Because you need to buy iLife 08 or newer on DVD first. If you're using iDVD 05, you probably have a PowerPC Mac and can't use iLife 11.
(69573) -
As the title says.
I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
I don't want to restart it because im scared that something might go wrong.
operating lionLimitLess- wrote:
Hi,
I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
Thanks
I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread. -
i am trying to watch a movie on Quick time with the extension .FLV and it will not play. I updated my flash. any suggestions?
Some other programs you can try.
Video Player - Divx
Video Player – Flip4Mac
Video Player - VLC -
heey i bought an iphone 3gs about 2-3 months ago (used) was in mint condition well taken care of not even a scratch as soon as i got home i tried syncing it to my computer but didnt work it didnt even sync or notice my iphone software .. so i went to my friends and synced it there it has been working for music but videos wont work? but i didnt care and then the pop up that says update so we would click it wait and it wouldnt work ever since ive had it so i left it like that so i went to my friend today i blanked it off the phone itself and then tried to get the newest update cuz i wasnt able to before so i did and now im locked out and it says sim failure invalid sim i can even get into it PLEASE HELP and cant get a new sim at the moment or take it into the apple store because i live about an hour and a half away from the city and rarley go to it please help me !!!!!!!!!!!!!!
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
opening a new file in photoshop cc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.
Graphics card is the problem.
Trying to update drivers now.
Thanks for your help
john -
everytime i link my iphone up to my laptop the message 'welcome to your new iphone' with the option restore from back up or new iphone. i once did restore from back up and it deleted all my recent pictures, music etc. how can i get pass this stage?
Hi Khuram1981 - thank you thank you thank you! All sorted! dont suppose you know how to fix another problem I have??? for weeks now, since updating to ios5 I think, for some reason every time I have tried to log onto app store it says CANNOT CONNECT TO ITUNES STORE. It's nothing to do with my computer, and I've been to the Geniius bar but they couldnt help and nothing I seem to do lets me update my Apps and even worse, I cant even buy any more. Any suggestions?
Again thank you SO much for helping with other problem = a real relief.
Chatterwind xx -
Adobe extensions show in the Extension Manager and are enabled but do not appear at all in Photoshop CC 2014. Third party extensions do show up and can be used. All extensions are available in and can be used Photoshop CC. I have reinstalled CC and Extension Manager to the most recent releases and the Adobe extensions are still not available in Photoshop CC 2014. What should I do now?
Flash based extensions are not supported by PS CC 2014 anymore. Please refer to http://blogs.adobe.com/photoshopdotcom/2014/04/photoshop-spring-cleaning.html, http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
And http://blogs.adobe.com/crawlspace/2014/06/2014-release-of-photoshop-cc-faq.html#plugins (scroll down to "Why don’t my 3rd Panels show up in the 2014 release of Photoshop CC? What happened to Oil Paint, Mini-Bridge & Kuler?”)
There is a new Kuler HTML5 panel available on Add Ons: http://adobe.ly/UgxQSN
Adobe is working on HTML based version of Adobe Watermark, eMailer, etc.
If some extensions are must have for you, you have to continue to use PS CC until HTML based counterparts become available. -
have recently downloaded the newest version of firefox. after installing i am happy to say i am pleased with the new look and features etc though for some reason i am unable to open new tabs as before.
i now have to right click on bookmarks or favorites and select open in a new tab to do so, rather than simply clicking on the new tab button..If the problem turns out to be the "New Tabs at the End" extension, there actually is an internal setting for this that you could use instead.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''tabs''' and pause while the list is filtered
(3) Double-click the '''browser.tabs.insertRelatedAfterCurrent''' preference to switch it from true to false. That's it. -
After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
My mac hung up while installing an update. It took hours and still did not complete the update. I restarted my mac. Upon turning it back on, a wheel has been spinning on a grey screen. I tried to reinstall OS X from utilities, but encounter an error. What do I do?
Hey Manaskala,
First point of call on all grey screen issues is the following:
http://support.apple.com/kb/TS2570
Given this issue has appeared after a software update, I'd advise you do the following instead though:
1. Get an external hard drive, with enough space to put the entire hard drive of your Mac onto. Make sure you've safely copied any data you have off of it, as the next step will erase it.
2. In the recovery HD of your machine, use Disk Utility to format you EXTERNAL hard drive with the partition table as GUID, and the format as Mac OS Extended (Journaled).
3. Get out of Disk Utility, and click Reinstall Mac OS X.
4. When asked where, choose to install onto your external hard drive.
5. When the download and installation is complete, your Mac will reboot into a clean fresh setup screen. Make your user account an administrator, and make up a name and password; I use 'Test' and 'test'.
6. Your machine is now running from the external hard drive, not the internal hard drive, so don't be alarmed when you don't see your files.
7. Open the finder, you should see 'Macintosh HD' in the sidebar. This is the internal hard drive of your computer.
8. Open Macintosh HD, and copy out the following folders into a new folder on your desktop:
-Users.
-Applications.
-Library. (This only needs to be done if you use 3rd party software that saves things in the /Library, do a quick google and see if it does e.g. Photoshop, Protools).
9. When these have copied (it'll take quiet a while), you can now use Disk Utility to erase your hard drive. Don't erase Macintosh HD but the ENTIRE hard drive on the inside of your Mac, and as Thomas A Reed mentioned, there was likely an existing issue on your HDD so please go to Security Options and choose 'Zero Out' before clicking erase. This will rebuild the partition table which was a possible cause of the failed update.
10. Reboot the machine holding 'Option', go to recovery HD.
11. Choose 'Reinstall Mac OS X', this time onto your INTERNAL hard drive.
12. When this is complete, make another admin user called test and password test, like you did last time.
13. Run Software Update from the menu of your Mac.
14. In the Finder, you should see your external Hard Drive. open it up, inside that you should see your desktop etc, and on the desktop will be your folder containing Library, Applications and Users.
15. Go to Finder up next to the and choose File -> New Finder Window.
16. In your second finder window, open up Macintosh HD (through the Go -> Computer menu), and go to your Users folder.
17. Open the Users folder in your first finder window, and copy your user folder (has your name on it) into the second user folder (the one inside Macintosh HD).
18. This might take a while.
19. When complete, go to System Preferences -> Users and Groups and unlock the padlock.
20. Click the '+' sign, and make a new administrator user.
21. Now, the fun bit. Note the name of your user folder you copied, e.g. 'Nathan', containing all of your stuff. Note the difference between your user folder (has your name on it) and the Users folder (contains YOUR user folder, guest folder and shared folder).
22. Make the ACCOUNT NAME of your new adminstrator user the EXACT name of your user folder (normally lower case and without spaces), this is case sensitive folks. Your full name can be whatever you want, usually your full name.
23. Then click create. You should be informed that a home folder with that name in it already exists in the Users folder, would you like to make your new account from that folder? say YES!
24. When this is complete, log out of the Test user, log into your new account we've just made, all your stuff should be there.
25. ???????
26. Profit.
There's a few little bits that may need to be cleaned up afterwards, applications folder from your external hard drive should replace the applications folder on your internal hard drive, if the previously mentioned /Library folder contained important goodies then that should replace the /Library folder on your new Mac.
Hopefully that will help you out, straight after that is done make sure your stuff is there, erase your external hard drive and turn on time machine! -
my ipad is connected to my wifi but the app store and itunes store never open, the internet never works and it is always loading but never working. I dont understand why as my computer works for my wifi and my brand new ipad should too.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I updated my Itunes the other day and now, when clicking on the itunes icon, the program does not open?? I have tried uninstalling and reinstalling, resetting the computer, checking permissions, running as adminstrator.. nothing is working?? Help!!
Amazing steps you've done so far! The great news is this is very unlikely an issue with your iPhone.
I've run into a similar issue lately as well. I narrowed it down to one song that was causing 30 songs not to sync. I removed the song from the sync list (unchecked it) and all 29 songs were able to sync.
You may be running into a similar issue. This may be a problem with this version of iTunes, an issue with one song or a group of songs; hard to know for sure. It's important to narrow down and isolate the cause. Most imporantly get that music back on there!
The way to narrow down the casue add just a few songs at a time (even 1, just to get that first sync finished). Manually syncing is what you'll need here.
Plug in your iPhone, on the Summary screen (shows a picture of your iPhone, the iOS version, Restore iPhone....; etc). Under the Options area at the bottom choose to Manually Manage Videos and Music then choose Apply in the lower right. The music that's on your iPhone now should be removed from your iPhone now. You're now able to sync music manually.
The link below explains how to drag the songs from the iTunes library on the computer on to your iPhone which will start the sync. Add just one song just to see if you can get 1 of those hundreds of songs on there. If you can, awesome! Keep adding until you find the song or group of songs that are causing this issue.
http://support.apple.com/kb/HT1535
Please let me know how things are going.
Cheers! -
In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
ThanksHi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
I have updated (more than once) to Firefox Version 8.01. When I check Firefox Help:About, it confirms the version number and indicates that this is the current version. On Google, however, when I try to use G-Mail or +Google, gives me a message that my version of Firefox is no longer supported (and provides a link to download the current version). Additionally, Firefox itself, when I tried to use the Help:Submit Feedback menu option, indicates that I cannot use that option until I have first upgraded to the current version. Apparently, although I have upgraded, there is some marker or indicator that has not been updated from a previous version to indicate to websites which version of this browser is running on my machine. I would like to get this resolved, as it is keeping me from doing a few things I would like to do. By the way, I just looked at the dialog box below, following the comment "we've made some educated guesses about your current browser ..." it, too, indicates that my current version is 3.5.7.
You have a <b>general.useragent.override</b> pref that identifies you as Firefox/3.5.7
*Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.7) Gecko/20091221 Firefox/3.5.7 (.NET CLR 3.5.30729)
See:
*https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
Maybe you are looking for
-
*Hi I would like to know how to make the installer for my executable run the DAqcarddriver and runtime engine installer automatically I would like to include run time engine and the drivers of my daqcard(AI16XE50),( and maybe Ni daq or anything else
-
Stuck at error with How To Example for Data Binding in Multi-Form App
I have succesfully completed the section "Serial Forms Use Case" by Ralph Gordon's in "Managing ADF JClient Data Binding in a Multi-Fom Application" How To Document. Everything worked as explained. Then I tried doing the second section "Concurrent Fo
-
QT Video only shows a Question Mark
I have embedded a new mov file and set-up the html code on a wordpress site, but all that appears after you "click to play" is a question mark. It's the first video on this page: http://lyn-dee.com/meet-lyn-dee/lyn-deetv/ Thoughts?
-
BPM Integration with Java webdynpro
Hi All, I am new in BPM forum . I want to integrate one JWD DC to anather JWD (Java webdynpro) so i need to pass one value to anather Dc using BPM . My Scenario is.. I want to pass one unique value from one component (person who is created the
-
I have been using IWeb for awhile and am very comfortable with the program. Lately, a few problems have emerged. Most irritating is that one of my pages will not publish to my website on .MAC. I've tried remaking the page, refreshing and re-publishin