Updates to website after domain name change

Can I still update my website using iweb after I transition to a new domain name?

I use third party hosting to mean a company other than Apple's .Mac. I also use godaddy to host my sites and it is very simple. They will provide an address of the ftp site name for your domain. I publish from iWeb to a folder, then use Cyberduck (any FTP program will do) to upload. You don't even need the ftp program because godaddy has their own simple ftp built in to the service. They also have excellent and free technical service. You can look at my site at: http://bandb.holage.com.

Similar Messages

Connection Errors to Remote Desktop from OSX after Domain name change

We have an issue using Microsoft Remote Desktop from Macs in our school. All was well until we changed the domain name of our RDS servers and installed a new wildcard certificate. Connections work perfectly in Windows 7/8 and also iOS on iPads, but we cannot
get any Macs to connect having tried OSX 10.7 and 10.9. The error message says the connection failed to load but seems to add a spurious end to the connection string - TS/en-US/Default.aspx - but we cannot trace where this is being picked up.
We can get to the site in a web browser and sign in to receive the "browser not supported" message in Safari so traffic is obviously getting to the severs.
Has anyone else had a similar issue? We have spent days poking around with DNS etc but can't seem to make any progress here.

Hi Jeremy,
I have tried removing connections and also re-installing the App. We have been using this App since January with no real issues until we made our domain name change - I really don't understand why it works fine in Windows and iOS but not OSX. We are doing
nothing different to what we have done from day 1.
Log file from our old connection when it was working looked like this:
[2014-Mar-24 10:41:43] RDP (0): Final rdp configuration used: redirectcomports=1
server port=3389
use multimon=1
redirectdrives=1
promptcredentialonce=1
authentication level=0
full address=rdsfarm.xxxxxxx.internal
session bpp=16
prompt for credentials on client=1
redirectprinters=1
drivestoredirect=*
alternate shell=||OpenMind
gatewayusagemethod=2
alternate full address=rdsfarm.xxxxxx.internal
workspace id=rdsgw.xxxxxxx.internal
allow font smoothing=1
redirectposdevices=0
audiocapturemode=1
gatewaycredentialssource=0
remoteapplicationname=OpenMind 2.0
devicestoredirect=*
remoteapplicationmode=1
remoteapplicationprogram=||OpenMind
enablecredsspsupport=1
redirectsmartcards=1
redirectclipboard=1
span monitors=1
gatewayprofileusagemethod=1
gatewayhostname=rds.xxxxxxx.sch.uk
remoteapplicationcmdline=
The log file looks very different now, all I am getting is:
[2014-Jun-17 10:26:41] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Jun-17 10:26:41] RDP (0): lo0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-17 10:26:41] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Jun-17 10:26:41] RDP (0): gif0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): stf0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en1 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en1 af=30 (AF_INET6) addr=fe80::21f:5bff:feb8:3f72%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-17 10:26:41] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.65 netmask=255.255.255.0
[2014-Jun-17 10:26:41] RDP (0): fw0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): --- END INTERFACE LIST ---
[2014-Jun-17 10:26:41] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jun-17 10:26:41] RDP (0): client version: 8.0.24875
[2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-17 10:26:41] RDP (0): correlation id: 9f18df13-7c84-dc4b-a780-e6b77a280000
[2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-17 10:26:41] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Jun-17 11:44:15] RDP (0): *** Application terminated ***
[2014-Jun-18 09:51:37] RDP (0): *** Application terminated ***
[2014-Jun-19 12:00:19] RDP (0): *** Application terminated ***
[2014-Jun-19 12:15:32] RDP (0): *** Application terminated ***
[2014-Jun-19 12:16:21] RDP (0): *** Application terminated ***

App server domain name changed

Hi All,
Our App server domain name changed so we did following ways to take the changes to effect. When starting the Middle-tire gives error
Old name=koredm104715.in.company.com
New name=ias-instance id=koredm104715.apac.company.com
C:\Oracle\Product\OraMidTier10gR2\chgip\scripts>cmd chgiphost.bat -mid
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Oracle\Product\OraMidTier10gR2\chgip\scripts>cmd /c chgiphost.bat -mid
Oracle Home set to C:\Oracle\Product\OraMidTier10gR2
Starting Change Hostname/IP...
Enter fully qualified hostname (hostname.domainname) of destination
(koredm104715.APAC.company.com)>>koredm104715.APAC.company.com
Enter fully qualified hostname (hostname.domainname) of source
(koredm104715.in.company.com)>>koredm104715.APAC.company.com <----------- Issue is here as source should be koredm104715.IN.company.com
Enter valid IP Address of destination
(10.47.32.43)>>10.47.32.43
Enter valid IP Address of source
(10.47.32.43)>>10.47.32.43
Source and destination hostname/IP are identical.
Continue? (y/n) y
Change Hostname/IP completed successfully.
C:\Oracle\Product\OraMidTier10gR2\chgip\scripts>cd..
C:\Oracle\Product\OraMidTier10gR2\chgip>cd..
C:\Oracle\Product\OraMidTier10gR2>cd opmn\bin\
C:\Oracle\Product\OraMidTier10gR2\opmn\bin>opmnctl startall
opmnctl: starting opmn and all managed processes...
==============================================================================
opmn id=koredm104715:6200
    5 of 7 processes started.
ias-instance id=OMT_10gR2.koredm104715.in.company.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
    WebCache/WebCache/WebCache
Error
--> Process (pid=3152)
    failed to start a managed process after the maximum retry limit
    Log:
    C:\Oracle\Product\OraMidTier10gR2\opmn\logs\WebCache~WebCache~1
ias-component/process-type/process-set:
    WebCache/WebCacheAdmin/WebCacheAdmin
Error
--> Process (pid=4924)
    failed to start a managed process after the maximum retry limit
    Log:
    C:\Oracle\Product\OraMidTier10gR2\opmn\logs\WebCache~WebCacheAdmin~1
C:\Oracle\Product\OraMidTier10gR2\opmn\bin>Edited by: Lokanath Giri on १९ जनवरी, २०१२ १:५८ अपराह्न

Have you checked your web cache log files for errors? Also check the %ORACLE_HOME%\opmn\log directory as there are many log files which can be helpful resolving your issue.
Thanks,
EJ

Domain Name Change in CSS

We have a CSS doing HTTP load balancing. There is no SSL termination done on this device.
will the domain name change have any impact on the load balancer?
thanks
sathappan

If you see the domain name in your CSS config, then yes there will be an impact.
Otherwise, no.
By default we do not check the domain name.
Gilles.

Domain Name Change procedure

Can anyone tell me which are the changes to do in the alui portal when the domain name change ? Which are the files to modify ? Does any tool exist to automate the task ?
ex : portal.toto.com became portal.titi.corporate.com

I'm interested to any solutions too.
For instance, my solution was to find and change all configuration files with a command line like "find . -name "*.xml""...
But you have also to change configuration inside the portal, like all remote web services addresses
I think it's not so easy to change the domain name

Domain Name Change Disabling Keys

I'm told that our domain name change from hhp.umd.edu to
sph.umd.edu will disable the Contribute keys.
Is that correct and if so, how do I get new keys that are
usable with the new domain?
thanks for your assistance.
daniel

I have a related question. I have about 20 different
connections that I have set up manually. Now that our domain login
has changed the connections are no longer there. Where is that
information stored. I'd like to recover it.

Domain name change broke oms/agents/grid control

We merged with another company and the domain names changed for all servers last weekend. I fixed all servers (tnsnames, listner.ora and db_domain parameter), so sqlplus works and all processes work.
My question is: which parameters do I need to change in the agents and the oms for gridcontrol to work again. Where are those parameters? Is there any documentation I can follow?
Thanks.

Hi.
if the domain name from EM GC has changed you need to migrate the repository
and reinstall the oms.
*T
Oracle® Enterprise Manager
Grid Control Installation and Configuration Guide
10g Release 5 (10.2.0.5.0)
E10953-11
September 2009
Oracle® Enterprise Manager
Advanced Configuration
10g Release 5 (10.2.0.5)
E10954-03
Edited by: tbrinkmann on Feb 16, 2010 6:00 AM

Internet Email Domain Name Change

Mangagement wants our email domain name changed because of it's length. Another government agency handles hosting for us now and can't change it for us. I have paid for a new name using a company on the internet and now have to switch it over. I see, in console one, that I can create a second name in Tools -> Groupwise System Operations -> Internet addressing and then set one of them to preffered. Can I do this and then set the new name as preferred? I would like to allow email that is addressed to the old email domain name to flow to the users for 30 days. Looks like I will need to change the foriegn ID in the gwia and also the name in the internal groupwise domain properties. Is there anything else that needs to be done? Is this the best way to do this? Thanks

On 7/30/2012 3:36 PM, dgonnse wrote:
>
> Mangagement wants our email domain name changed because of it's length.
> Another government agency handles hosting for us now and can't change
> it for us. I have paid for a new name using a company on the internet
> and now have to switch it over. I see, in console one, that I can
> create a second name in Tools -> Groupwise System Operations -> Internet
> addressing and then set one of them to preffered. Can I do this and
> then set the new name as preferred? I would like to allow email that is
> addressed to the old email domain name to flow to the users for 30 days.
> Looks like I will need to change the foriegn ID in the gwia and also
> the name in the internal groupwise domain properties. Is there anything
> else that needs to be done? Is this the best way to do this? Thanks
>
>
assuming there's no po/user/domain overrides of IA settings, that should
work ok.

How can I configure EM after machine name changed?

Dear all,
How can I configure EM after machine name changed?
Thanks in advance.

You can change it for Management Agents, but you need to re-install OMS if the hostname for the OMS host has changed.

Could domain name change after Unity migration?

Hello everyone,
I will upgrade Unity3.1(6) to Unity 4.0(5) (Voice Mail only).Here is the main steps:
1. backup current Unity data
2. install Windows2K server w/Exchange 2000,Unity3.1(6) from scratch.(not replacing server hardware,
Windows2k server and Exchange 2000 server are located in the same server)
3. recover Unity data on new installed windows2000 w/Exchange 2000 server
4. Upgrading Unity3.1(6) to Unity 4.0(5)
I got a few questions here.
1. Should Domain name keep the same? ( If I need to change Domain name, is it applicable?)
2. Should I run Active Directory connetcor for recovering Exchange5.5 data?
Hope to share experience with you. Thanks for your reply.
Background:
Unity 3.1(6), Exchange5.5 installed on Windows2000 server A,
Users in WindowsNT 4.0 PDC server B,
After migrating:
Remove WindowsNT 4.0 PDC server B,
windows server A will be Domain Controller w/Exchange2000, Unity 4.0(5)
Howard

Hello,
I don't understand why you are going to rebuild the server, if you just want to upgrade to Unity 4.0 (I am assuming that you currently have W2K); you just need to:
- Do a Dirt backup
- Upgrade to Exchange 2K
- Do a Dirt backup
- Install the CUSPA and CUICA
Just follow the instructions on this link:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/rug/ex/ru_020.htm#wp1040363

OS X Server clients can't login after IP renumber and domain Name change

I can not seem to get the logins working again on my OS X server (10.9.4 w/ server 3.1.2 on a 1 yr old. MacMini) after I needed to renumber the IP and change the domain name. I destroyed the Open Directory server, recreated it and created one test account. If I log in to the client with a local account I can connect to the server (Go>Connect To Server) from the client using my newly created account, but when I try to login to the server using the same network account login I get the "shaking head" response immediately. I have rebound the server to this client and it says that network accounts are available, but seem to be at a loss to understand why it won't let me login...
The only error message I see in any of the logs is the following:
(AFP Error Log:) Sep 15 20:21:47 isis.mydomain.com AppleFileServer[3032] <Info>: major error <1>: No credentials were supplied, or the credentials were unavailable or inaccessible.
I'm not sure what credentials it is referring to. I created a self signed certificate that I am using with OD, could that be the one?

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. Follow these instructions to rebuild the Kerberos configuration on the master.
5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
7. Reboot the master and the clients.
8. Don't log in to the server with a network user's account.
9. Disable any internal firewalls in use, including third-party "security" software.
10. If you've created any replica servers, delete them.
11. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.

Not able to start the listener in oracle 10g after the domain name changed

Hi
I had installed the oracle 10g on zLinux. It was working fine( was able to mount the database and start the listener). Now my server's domain name got changed. So i have added the new domain name in the tnsnames.ora and listeners.ora file . now i could able to mount the databases but am not able to start the listener . whille starting the listener , am getting the following error
oracle@ptcr4d00:~> lsnrctl start
LSNRCTL for Linux: Version 10.2.0.2.0 - Production on 05-AUG-2009 10:31:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /opt/oracle/10g/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.2.0 - Production
System parameter file is /opt/oracle/10g/network/admin/listener.ora
Log messages written to /opt/oracle/10g/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PTCR4D00)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 104: Connection reset by peer
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=PTCR4D00)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
I have posted the contents of the tnsnames.ora and listeners.ora
TNSNAMES.ORA
TC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = TC)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
LISTENERS.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /opt/oracle/10g)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
Could you please help me to resolve this issue ?
Regards
Mani

Hi
Please find the content of the /etc/hosts below
# IP-Address Full-Qualified-Hostname Short-Hostname
#127.0.0.1 localhost
9.124.114.49 PTCR4D00
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts
9.124.114.49 PTCR4D00 PTCR4D00
Regards
Mani

Add-ons not working after server IP address/domain name change.

Hello everyone,
We have just changed the IP address of our SAP Business One server and moved it into a new domain.
Although SAP Business One is working as expected, the add-ins created by a third party do not work. Having very little knowledge of SAP I do not understand where the problem could be.
The third party were on-site today and have reinstalled the add-ons but they still do not work.
There is an error message when starting the client that states: Module <Compatability Licensed for Add-ons> Expired on <20080115> but the third party have stated that this isn't a license issue.
Can anyone provide any assistance/advice on what the problem may be?
The possibilities for the problem at the moment are:
- Invalid license key for add-ons (but why would changing the IP address/domain name cause this issue?)
- The add-on is coded with the original IP address of the server.
- There is a permissions problem that has been missed (as users are in a new domain).
Any advice/suggestions are welcome.
Many thanks,
John

>
John Galley wrote:
>
> The possibilities for the problem at the moment are:
>
> - Invalid license key for add-ons (but why would changing the IP address/domain name cause this issue?)
> - The add-on is coded with the original IP address of the server.
> - There is a permissions problem that has been missed (as users are in a new domain).
I am afraid that the possible cause is the addon is coded with the IP address in their connection method. It could be possible that it is a hardcoded addon.
you must ask the addon developer to change it and do not use the IP address anymore in the addon.
Rgds,

Cannot contact user after a name change

One of our users got married and changed her last name. My colleagues changed her name and alias in AD and in Exchange, and they changed her email address, keeping the old address as a secondary SMTP address in Exchange. I ran the following command
on the Lync server:
Set-CsUser -Identity "CN=JNewname,OU=HQ,DC=Corp,DC=Com" -SipAddress sip:[email protected]
After the user logged off the Domain and then logged back on, she could log in to Lync and could initiate an IM conversation with me. However, I still cannot contact her. She was never in my favorites list, and when I start typing her new alias,
she shows up in my Lync client with her new name and then "Presence unknown". When I try to initiate an IM conversation with her, my Lync client says "We couldn't send this message because we couldn't find Newname, Jane".
I have tried deleting the Lync local cache from my client machine and still have the same errors. What am I missing with this name change?
Thank you very much for your help.

Thank you! That must have been what I should have done after I changed the sip address. As it turns out, the contact had started working sometime before you posted this. Does this update process take place automatically over time and the
Update-CsAddressBook command would have forced the update immediately? I had changed the sip address about 2 hours before I posted this question.
Thanks so much for your help. I will incorporate this into a memo I am writing for making a name change.

Primary email domain name change

We are going to be changing our company's email domain name shortly in order to make it shorter. We are running Exchange 2010, mostly Outlook 2010, on a mostly Server 2008 domain but still running in 2003 mode. We have a trust with a sister company
and until they upgrade to 2008 we cannot upgrade.
As an example we are changing our domain name from @microsoftcontoso.com to @contoso.com.
I am testing in my machine and set exchange & our spam filters to accept email from contoso.com. I also changed my primary email address to be @contoso.com. I tested to my personal email and my new emails are coming from the correct email address.
My issue lies in the fact that my Outlook client still shows my email address as @microsoftcontoso.com. If I create a new outlook profile on a new computer, it does show it as being just @contoso.com.
My question is how do I mass update everyone's Outlook in order for their Outlook client to show their new domain email address? My fear is people will get confused and think they have the wrong address.
Thank you for any help provided.

Hi,
Based on my research, group policy can help Outlook sync the new primary email address.
For more information, you can refer to the following similar thread:
http://social.technet.microsoft.com/Forums/exchange/en-US/aa15d1c5-5d28-4f72-b698-038c90264876/sync-outlook-after-changing-primary-email-addresses-on-exchange-2010?forum=exchange2010
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Updates to website after domain name change

Similar Messages

Maybe you are looking for