Updating 3250 - Firewall problem

Hey
I am trying to update my Nokia 3250, but it's not working. Everytime I start the updater, I get the message that a firewall is blocking my connections...and I don't even have a firewall at the moment.
Anyone here with a solution? A list of which ports I am supposed to have open for the program would also help.

/discussions/board/message?board.id=swupdate&message.id=9173
There ya go! Maintenance is happening
DKG

Similar Messages

Failed to update server firewall rules

Hi
I have a problem with the SQL firewall. Unfortunately, I can not add IP address. It always comes this error when saving: Failed to update server firewall rules
How can I change this? I need to change this setting so that I can work again. Unfortunately, I do not want to help the Support of Microsoft !!

Hi,
To configure your firewall, you create firewall rules that specify ranges of acceptable IP addresses. You can create firewall rules at the
server and database levels.
Server-level firewall rules: These rules enable clients to access your entire Azure SQL Database server, that is, all the databases within the same logical server. These rules are stored in the
master database.
Database-level firewall rules: These rules enable clients to access individual databases within your Azure SQL Database server. These rules are created per database and are stored in the individual databases (including
master). These rules can be helpful in restricting access to certain (secure) databases within the same logical server.
For additional information check this below link
http://msdn.microsoft.com/en-us/library/azure/ee621782.aspx
http://social.technet.microsoft.com/wiki/contents/articles/2677.windows-azure-sql-database-firewall-en-us.aspx
http://social.msdn.microsoft.com/Forums/azure/en-US/ea128f00-8a94-4ace-88ff-d7095ff60c1a/cannot-change-firewall-setting-for-sql-azure-after-ip-change?forum=ssdsgetstarted
Girish Prajwal

Nokia 3250 camera problems

im having bother with my camera on my 3250. basically when i swivel the bottom part it switches to the camera mode but there is no view finder display, its just diplaying the wallpaper. it randomly does this, more frequesntyl than not, and even when it does show the view finder, it freezes etc and looks pretty grainy etc.
any ideas folks?
cheers
rodgerq

just a wee update on my problem. took it to a dealer who flashed the software in a bid to fix the problem. after 3 seperate attempts, none of which worked, the phone has now been sent away for further investigation so we'll see what they say. i hope i get a fault report back with it.
rodgerq

HT4623 please help me when update my i phone 3G i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

FWM 01009 (null):firewall problem?

Hi Guys,
I have a problem with a DMZ installation and the firewall settings
Here's the situation.
On our internal network we have installed the servercomponents of BOXI Edge 3.1, which seems to be running fine.
We have a seperate Webserver with Tomcat 5.5 installed on it in the DMZ zone. Via Wdeploy I have deployed the war files on it (according to the wdeploy deploy document).
Whenever I want to logon to the CMC on my webserver machine, my login screen is appearing fine, but after I hit logon, I receive the error message FWM 010009 (null), a communication failure has occured. According to our firewall team, all ports are open in both directions. They have executed a trace and see that the BOXI Edge server is sending back packages, but that in that package should be an end communication order.
I still have (an older) VM with Edge 3.1 behind the firewalls (thus internally), from which I can access my newly installed machine in a glance...
As an extra test we have installed a complet Edge version on the Webserver as well. Communication on the webserver is OK, but as soon as we try to connect to the server behind the firewall, it goes wrong and the error appears.
So here comes my question, is there anyone who can give me a clue where it goes wrong?
Is it correct to say that it is a firewall problem?
If all ports are open on the firewall, communication shouldn't be a problem, isn't it?
Any help is appreciated.
Regards,
Jorn

Hi,
we have appointed a static port 4982 to the request port.
According to our firewall guys, no communications is coming from the request port. Even before the request port can answer, the port 6400 is sending a FIN package (termination package) to the application resulting in the error message.
They say that all ports are open and that it's not a firewall problem... However when I communicate within my LAN environment this is not a problem...
Can please someone help me out?
Regards,
Jorn
Edited by: Jornvdd on Sep 29, 2010 12:08 PM

I cant use the highlight, underline, or strikethrough function in a specific pdf file. The file isnt locked. I used to highlight texts from that file before the latest update. The problem occurs only with that file. Urgent need. Please help. Thanks!

i cant use the highlight, underline, or strikethrough function in a specific pdf file. The file isnt locked. I used to highlight texts from that file before the latest update. The problem occurs only with that file. Urgent need. Please help. Thanks!

Chester31,
Thank you very much for sharing your file with us! Now that we are able to reproduce the problem at our end, you may stop sharing the file on Acrobat.com.
Do you know when this problem (for not being able to add new highlight/strikeout/underline) has started? Did you update your iOS from 7.x to 8.0 recently?
We will continue investigating the problem and let you know what we find.
Thank you again for your help.

HT4906 Both my iPhoto, Aperture and OX is update still having problem asking me to update my iPhoto.

Both my iPhoto, Aperture and OX is update still having problem asking me to update my iPhoto.

Make a temporary, backup copy (select the library and type Command+D) if you don't already have a currnet backup of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I have just installed Lion OS and Face Time encounters server problems on sign up. I have sought the firewall problem without success and even temporarily turned off firewall with no success.

I have just installed Lion OS and Face Time encounters server problems on sign up. I have sought to rectify the firewall problem without success and even temporarily turned off firewall with no success. Any ideas?

Some folks have discovered that changing their DNS service fixes FaceTime connection issues.
The ideal way is to configure your modem/router with DNS service, but often settings in System Preferences/Network/Advanced/DNS on your Mac will override the router settings. Try either of these;
OpenDNS
208.67.222.222, 208.67.220.220
Google Public DNS
8.8.8.8, 8.8.4.4

Errors occurred while installing the updates. if the problem persists choose tools download only

errors occurred while installing the updates. if the problem persists choose tools download only and install manully.

Does anyone get this message when attempting to download? What to do?
The webpage athttps://swdlp.apple.com/cgi-bin/WebObjects/SoftwareDownloadApp.woa/wa/getProduct Data?localang=en_us&grp_code=itunes&returnURL=http://www.apple.com/itunes/downlo ad&isMiniiFrameReq=N might be temporarily down or it may have moved permanently to a new web address.
Error 501 (net::ERR_INSECURE_RESPONSE): Unknown error.

HT5815 After update, i have problems with wifi

after update, i have problem with wifi
wifi always falls
I get no internet access
I have to reboot the system to return

Information.
Troubleshooting Wi-Fi connection issues - MacBook Air (Mid 2013)
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About

OS X update installation failure problem

MacBook Pro 7,1 core duo 2,66GHz (2010)
Mac Os X 10.6.3
The Macbook fell down and the LCD screen is broken. If I run the hardware test, it fails. However, when attached to an external monitor seems to work fine. So this is the way I'm using it right now.
PROBLEM:
When I run Software Update an update for the system is listed among others (10.6.8 combo update). If I accept updating the system, an error occurs during installation.
Other packages are installed without problems (if selected from the software update app excluding the system update).
What I tried after reading some postings:
- Running DiskUtility after booting from DVD (fixed some errors indeed, but not solving the issue. now running utility does not reveal errors but still installation fails)
- Creating a new user with administrative privileges and trying to update from that account (no change)
- Manually downloading updates (tried even with immediately successive update: 10.6.4) and installing manually. Same Installation failed message. Installation starts, writes files for a while and then aborts.
I'm wandering if the installation of system software requires a hardware test to be performed and succeed.
Any siggestion on how to overcome this problem?
Thanks a lot!

Second update regarding my problem. Despite the OS X update was successfull and any subsequent software update went through without problem, my macbook is still having problems:
Native apps like Mail and Preview quit unexpectedly (I cant use Preview anymore. I need to use Acrobat). Mail sometimes works for half an hour, sometimes for just a couple of minutes. Firefox and Chrome (external apps) also crash more than usual even if I still can use them.
I'm thinking that there is some extra hardware problem in addition to the broken LCD, but I'd like some help to identify it. The disk has been substituted after the accident, and even a recent scan wit Disk Utility does not reveal any problem. Could it be main memory access ? What else?
Is there a diagnostic tool I can use? I have applecare active and somebody told me there is a diagnostic package with it but I don't know how to get it ...
thanks!

Error occurred while installing updates. If problem persits, choose tools, download only and try installing manually

error occurred while installing updates. If problem persits, choose tools, download only and try installing manually

Are you able to update if you use an iTunesSetup.exe (or iTunes64Setup.exe) installler file downloaded from the Apple website?
http://www.apple.com/itunes/download/

Have a first gen ipad. Can't download version 5.1 because iTunes 11.1 need to be downloaded. Cannot download version of iTunes. " errors occured while installing updates. if the problem persists choose tools download only and try installing manually"

Have a first gen iPad with 4.3 IOS. Can't download version 5.1 because iTunes 11.1 need to be downloaded. Cannot download version of iTunes. " errors occured while installing updates. if the problem persists choose tools>download only and try installing manually". This is as far as I can get. Can't find tools to manually download. When I try to reset to factory settings, I get an error also.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage

After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage of memory storage space
Osmhto tried to solve the problem of low sound we have become we do not hear a tone sounds clearly like the first phone

hello...
I am having the same issue here... just upgraded my 5s to 7.1.1 (never jailbroken - factory unlocked) and then boom... NO Service!!! Searching ... that's it. currently using Smart Telecom Sim... at first it was working for me... after 6-7 hours, it started the No Service issue. I cannot send a text or make a call...
I did the steps you have taken but it is still not working... any updates on your end?

Updating 3250 - Firewall problem

Similar Messages

Maybe you are looking for