Updating a Real-time Infocube
Hi All,
In one of the requirements in BPS planning.
We are using the Exit function for validating the data.
In our function module we are fetching the data and two of the fields in the cube needs to be modified in the cube after completion of the validations.
I would like to know if there is any existing functionality or Function module in BPS planning for this for updating the Real-time Info cube.
Thanks
Prathish
Try this link:
www.geocities.com/cynarad/reference_for_bps_programming.pdf
In the chapter where table xth_data is described more detailed this can be one possibility to validate your realtime IC.
Have fun,
Clemens
Similar Messages
-
MultiProvider with two real-time InfoCubes?
Hi,
I created a multiprovider with two real-time Infocubes. I need to create a formula in FOX editor where I have to update only one InfoCube. Is it possible? If so, I am looking for syntax with InfoCube name in the formula. The KeyFigures have the same names in both InfoCubes.
Any help would be appreciated.
Thank you,
VidyaHi Pratyush,
I am using IP. I created Aggregation Level, Filter, etc. It created a characteristic "0INFOPROV" and I used that cha. to read data and to write the data. It did not work.
Here is the problem.
- We have one basic cube (history data: HCUBE) and two transactional cubes (actual data: ACUBE and plan data: PCUBE)
- Created a multiprovider (MULTI) for HCUBE, ACUBE, PCUBE
- Also created Agg level and filter
- Note: Three cubes have the same Key Figure (0Amount)
- Created a planning function and tried something like {KF, PCUBE} = {KF, MULTI} (as suggested by Andrey)
- Task is to read data from HCUBE and ACUBE and only write to PCUBE.
- I am able to read data but unable to write data.
Any ideas?
Thank you,
Vidya -
How to copy data from a Input query to real time Infocube
Hi All, I need some help on IP related stuff. The details are as below:
I am using two real time infocubes and one Multiprovider on them.
First Infocube u2018PRODUCTu2019 with the following Objects:
Product Group ,Product,Region ,Fiscal Year , Fiscal Year Varient ,0currency
Gross Sales
Second Infocube u2018C_PRODUCT u2018 with the following Objects:
Product Group ,Product,Region ,Fiscal Year , Fiscal Year Varient ,0currency
Gross Sales and Forecast Sales
( u2018Forecast Salesu2019 in the extra object in the second Infocube. Remaining objects are same in the both the cubes)
First Infocube u2018Productu2019 has data but the second cube does not have any data.
I have created a Multiprovider ZMulti and in that I have included these two cubes. On this Multi Provider, I have created a Aggrigation Level(The details of the aggregation level is provided in the next page).
On this Aggrigation level I have built a Input Query by which I run the report.
(In the Rows area, I have taken Product Group, Product, Region and Fical year.
In the Key Figure section, I have taken Gross Sales and Forecast Sales( which is part of the second Infocube C_Product). These two Key Figures are made Input as Input ready. And the Query is Input ready query. In the Filter, I have taken Fiscal Year Variant. )
Data available in the first cube and no data currently in the second cube. Now executed the report and report displayed information from the first cube.
EX:
Product Product Region Year Gross Sales Forecast Sales
Group
PG01 Beer North 2008 10000 u2026u2026u2026
PG01 Beer South 2008 20000 u2026u2026u2026
PG01 Beer East 2008 15000 u2026u2026u2026
The second column is empty and there is no data for the Forecast sales Key Figure in the column.
Things look OK till the above.
Now based on the Gross Sales, I am entering forecast Sales values and I need to save the entire record to the second cube.
For this in the report, I have given the Forecast sales values in the second column and right clicked the mouse and form the menu which I got, selected the u2018SAVEu2019 Option to save the data. For some time, I can see u2018Processingu2019 message and later values at u2018Forecast Salesu2019 are disappearing.
Data is not saving to the cube second cube.
====================================================
Am I missing any thing?
In the Query, Do I need to provide InfoProvider and restrict it to specific value?
In the query, Do I need to include, 0currency object?
Could you please guide me on this?
=============================================
Details of the Aggrigation level.
I have created an Aggrigation Level ZAL_Prod on MultiProvider.
Selected all the objects and activated.
In the Filter, I have taken 0Fiscal Year Variant and saved it.Restrict Forecast sales to the Plan cube in the Query.
that should fix it. -
Edit in datasheet field is not updated in real time
Hello,
I have SharePoint 2007, a list viewed in Edit in DataSheet and a workflow attached to the list which updates a field FirstTitle in the list when the item is created.
The problem is that, while in Edit in Datasheet view, the field FirstTitle is not updated in real time so the workflow starts again and again because the field is still viewed as empty. The users keep receiving the error message "Your changes conflict
with those made concurrently by another user" (the other user being actually themselves). So they have to exit Edit in Datasheet and enter again in order to have FirstTitle field refreshed and that is annoying and totally unproductive.
I tried from SharePoint designer different checks, I used different actions like wait until item is changed and then stop but nothing worked. Is there any workaround to this ?
Thanks in advance,
Teddy
Able was I ere I saw ElbaThanks for sharing the answer here, it is really helpful for others with the similar issue.
Qiao Wei
TechNet Community Support -
Dynamic Update in real time with slider control
We have requirements to display complex data in a graphical format. So far this has gone well by leveraging ADF and DVT components (dvt:Map, dvt:gauge, dvt:bargraph, af:tables, af:inputNumberSlider, etc.); however, we recently have been asked to add real-time animation of these controls over time. In brief, the user requires the ability to control the on-screen visualization of data by sliding the control on an af:inputNumberSlider (or equivalent) that represents a multi-month time scale. While sliding this control, the user expects to see the data visualization controls dynamically update in real time, keeping up with the rate at which the user moves the slider control. Think of this like a flip book animation where the slider controls the page the user is looking at and they can flip through the pages forwards or backwards at any desired speed. The time slider increments are one hour.
Our current application architecture:
Oracle ADF Fusion Web Application (v 11.1.1.5)
EJB 3.0
Eclipselink
Oracle 11g
Any kind of help is highly appreciated.
Thanks,
MehabubHi,
the af:inputNumberSlider does not provide this functionality. Your alternative is a custom component (or any component that raises a client JS event) and call an af:serverListener in a custom event to send the notification to the server.
Frank -
Remote Extractor and Real Time Infocube for SEM BCS
Hi Experts,
I have somes doubts about the integration between SEM and BW.
There is a cycle that have the next processes:
1.- begin in R/3 with the movements in FI, CO and/or general ledgers
2.- Activate the extractors standards for replicate/extract data to BW. For example, 0FI_GL_XXXX.
3.- Configure a method for take the information from BW to SEM.
4.- My doubt begin here... For take the information from SEM to the real time infocube, where I configure? What Have I for configure?
The real time infocube, What is the proposal? Where take the data? Here, Do the remote extractor begin to apply?
Thank you very much for your collaboration.
Regards,
Jeysi AscanioWe're using 0FI_GL_20 to read directly from FAGLFLEXT into SEM-BCS via a BI remote cube. There are some basic transformations in BI to "populate" the remote cube, then a standard Load from Data Stream in BCS to do final mappings. In the BCS workbench, just create a source data basis off the remote cube.
This works at my current project due to fairly low ECC data volumes. If you are doing any complex mapping on the Company or Fiscal Year / Period infoobjects, you may need to create a inverse mapping routine in the remote cube to transfer selection criteria. If you see messages in the monitor following a data load such as "xx,xxx of xxx,xxx records ignored", that means that you are reading too much data from ECC and it is only getting filtered on the BCS side. We had this problem with a custom extractor and adding an inverse mapping routine cut the load from ~5min to 30sec. (Basically, the custom, template-delivered, extractor only had 0FISCPER, not 0FISCPER3 and 0FISCYEAR, so we would read all 17 K4 periods into BI, map them into BCS, then BCS would throw out the unneeded periods. Unfortunately, we did not have the option to change the extractor, so this was the best approach.).
If I had large data volumes, I would use a regular BI basic cube for staging (or possibly a multi-cube with a mix of basic and realtime, depending on the load requirements to BCS).
If you use 0FI_GL_20, I would strongly recommend you implement OSS Note 1245822, or be on SAP_APPL 603.0002 or later.
Hope that helps,
- Chris -
Getting Scopes to update in real time....
So, I know I can set the Program monitor to scopes, but then I lose the program. I know I can set the reference monitor to scopes and leave the program in the program monitor, but then the scopes don't update in real time. Arrgghh!!!!
Any way to do this, or is this yet another feature request issue.....? I used this all the time in FCP and it's kinda lame not having it.Really? I figured it was a memory issue, and that if you have a smokin fast machine that they would update in realtime. Guess not...
-
How to create Real Time Infocube in BW
Hi BW Experts,
We got one requirement. We need to create one Real Time Infocube.
Our Users will enter the data in Query Analyzer later.
Please can anyone tell me the step by step.
Is there any settings we need to give..
Thanks & Regards
AnjaliHi,
Creating a Real-Time InfoCube
When creating a new InfoCube in the Data Warehousing Workbench, select the Real-Time indicator.
Converting a Standard InfoCube into a Real-Time InfoCube
Conversion with Loss of Transaction Data
If the standard InfoCube already contains transaction data that you no longer need (for example, test data from the implementation phase of the system), proceed as follows:
1. In the InfoCube maintenance in the Data Warehousing Workbench, from the main menu, choose InfoCube ® Delete Data Content. The transaction data is deleted and the InfoCube is set to inactive.
2. Continue with the same procedure as with creating a real-time InfoCube.
Conversion with Retention of Transaction Data
If the standard InfoCube already contains transaction data from the production operation that you still need, proceed as follows:
Execute ABAP report SAP_CONVERT_NORMAL_TRANS under the name of the corresponding InfoCube. Schedule this report as a background job for InfoCubes with more than 10,000 data records because the runtime could potentially be long.
Try
http://help.sap.com/saphelp_nw04s/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm
Hope this helps.
Thanks,
JituK -
Reading data from the Real-Time Infocube
Hi,
I am using the FM RSDRI_INFOPROV_READ_RFC to read the data from the Real time Infocube..
But it reads only the Closed request. Is there anyway to read the open request data from real-time infocube via program.
Please suggest.
Regards,
MeiyHi,
I would assume that the function module can read the data only if its available for reporting.
May be you can try the following: You can close the request during the function module execution time and then reopen it. Not sure if this is possible.
Bye
Dinesh -
Reading data from Real-time Infocube
Is it possible to read data from the Real-Time Infocube by using the function module
RSDRI_INFOPROV_READHi,
If records from both the request should be read ie Request under processing(which is in yellow) and Request which is processed(Which is in Green) at a time. What should be done.
Is there any function module which returns the records of both requests.
Rgds,
Ganesha -
Smart Mailboxes: Why don't they update in real time?
I have a Smart Mailbox that shows me any Unread messages i have. As i read these messages, they become Read messages, yet they remain in the Smart Mailbox. Is there any way to initiate a real time update to these so that I am not required to switch Smart Mailboxes to initiate the update.
Not very 'smart' are they…
Any solutions are welcome.dsphereboy wrote:
That all sounds correct on paper. But in real life it just doesn't work out that way. Let's say I have 20 Unread messages in my Unread SmartMailbox. As I read each message they become Read messages. The messages do not automatically clear this mailbox. They stay there in a Read status inside the Unread Smart Mailbox. The only way I can update the mailbox is by switching over to another mailbox, any mailbox, and back to my Unread Smart Mailbox and then it properly shows only Unread messages.
And that is the correct action...the update trigger is when you move out of one and into another (acts as a confirmation that you're done).
Seems appropriate and a small price to pay. It would seem to be a burden if otherwise as it would always be working while you were trying to read....can't have everything at once -
Problems with Creating Real-Time InfoCube in BI 7.0
Hello, Everybody,
I try to create Real-Time cube for BW-BPS planning, but when i want to insert a key figure into real-time info cube i get error:
<i><b>Short dump has not been completely stored(too big)</b></i>
<i><b>Exception condition "Node_related_missing" raised.</b></i>
Could You help me?
Thanks in advance,
Best Regards,
Arunas StonysHi Arunas,
I think you are not on SP10. you may need to implement the SP10 or advance correction as in this note:
Note 968097 - Error in BI metadata maintenance (InfoCube, MultiProvider)
Symptom
Note that the attached corrections cause follow-up errors. You must also implement the corrections from Note 971918.
You are in the maintenance dialog for an InfoCube or a MultiProvider. When you enter new key figures in this provider, a program termination occurs with message "NODE_RELATED_MISSING" in class CL_RSO_DATA_TREE.
This problem occurs because the InfoProvider does not contain a unit dimension yet and the system tries to insert the relevant unit into the unit dimension (that does not exist).
Other terms
Transaction RSA1, RSDCUBE, RSDMPRO
Reason and Prerequisites
This problem is caused by a program error.
Solution
SAP NetWeaver 2004s BI
Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package is available once Note 0914304 "SAPBINews BI 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions.
To provide information in advance, the note(s) mentioned above may already be available before the Support Package(s) is/are released. In this case, the short text of the note still contains the words "Preliminary version".
Thanks,
Raj -
Finder folders not updating in real time
OS 10.8.2 - I have a folder on my desktop that I keep pdf printouts in that i generat in a MS Remote Desktop window at work. I have the folder linked thru the RDC. Prior to 10.8.1, this folder worked fine. The file would show up at the top of the window(as I have most updated selected for sorting). Now, the only way for the file to show up is if I delete an older file, any file, from that folder. Why is this happening? Any help would be greatly appreciated. I access this folder dozens of times a day and it's getting frustrating as I don't really want to delete any files from the folder.
Thanks
Macbook 13" Unibody(late 2008) OS 10.8.2Hi Nick,
According to your description, my understanding is that the changes in the documents cannot be synced immediately to SharePoint workspace from SharePoint Server.
All content in the SharePoint workspace and the SharePoint site is automatically synchronized as frequently as possible, at minimum every 10 minutes, depending on network traffic.
Please check the network traffic in your environment.
In addition, you didn't receive the acceptance notification when you invited new people to the workspace.
Please check if the Require acceptance confirmation is enabled when you invite new people.
More references:
http://office.microsoft.com/en-in/sharepoint-workspace-help/basic-tasks-in-sharepoint-workspace-2010-HA101830011.aspx
http://technet.microsoft.com/en-in/library/ee649102(v=office.14).aspx
http://office.microsoft.com/en-in/sharepoint-workspace-help/inviting-someone-to-a-workspace-in-sharepoint-workspace-2010-HA010283378.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
MSA 4.0 SP8 : Campaign description not updated in real time while saving?
with reference to this thread : refresh/update a list , I prefered creating my own instead of upping the older one
So the problem deals with data refreshing, or data updating into the objects :
When creating a campaign, after saving, the campaign description seems not to be updated. While we can see the right value we just entered,
- in the Campaign Search menu, the description is either empty (upon creation of a new campaign) or displays the old value if the description was modified.
- we have a Crystal report based on the campaign details (among other things), and the Description field (linked to the same datasource) is either empty or has the old value.
All is back to normal if we go to the Search menu, search the Campaign and open it.
Also, when creating a new campaign, and after saving (so there would be the Description bug), right-clicking on the tile and selecting the "Refresh All" option, it displays the campaign displayed before choosing to create a new one.
What is happening ? The controls involved are still standard, so is the "Refresh bug" a known one ? (I am comforting in this idea since i found the thread linked at the beginning)
Thanks and Regards,
FrançoisHi,
this is a well-known issue of 4.0 (I remember that I have read that this should be changed in 5.0 by defining a specific relation type for BO relations).
The detail tile is based on business object data but the search list is based on a record set retrieved by the search.
For all linked fields/properties there is an automatic refresh but NOT for data which is stored in a dependent object.
In your example campaigns are stored in BO BOCAMPAIGN with underlying IDES table smopccampn but the campaign short texts are stored in a separate object using table smopccamna.
Unfortunately this is a very technical explanation but at least it is one...:-))
Regards,
Wolfhard -
How to make a copy of a DB and keep it updated in real time?
Hi
I have an Oracle Database 10g RAC and ASM on HP UX platform in the production environment and I need to make a copy of that database on another server where each transaction is updated online.
Could you please tell me how I can do that?
There are tools to do that?
ThanksDataguard is in Oracle Enterprise, or I need to buy something else ?
In wiki ( not a great source I know :P )
Data Guard supports both physical standby and logical standby sites. Oracle Corporation makes Data Guard available only as a bundled feature included within its "Enterprise Edition" of the Oracle RDBMS.[1] Edited by: Archylus on 14/04/2010 02:32 PM
Maybe you are looking for
-
Error due to SAPAPPL1.005 (Disk 2)
Hi friends i am getting error during the installation , can you please tell me what could be the reason for this error. or from wheres can i download SAPAPPL1.005. java version "1.4.2_12" Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_
-
Deleting more than one e-mail at a time
Is there a way to delete multiple e-mails at once? it takes an awful long time to delete them one at a time.
-
While playing Book Worm, a message appeared that there are updates for the iPhone (at no cost!). There was no indication on the App icon of an update. I proceeded, entered my password and the "Download Now, iBooks will now begin to download" appear
-
How to save a .csv file to database server
Hi every body, I need to upload a .csv file from the client machine and save it to a directory in a database sever. I could do the uploading part. Can anyone tell me how to save the file? Another option is save the file as a CLOB in a database column
-
Inactive links on Firefox that work fine on Explorer
I am creating a landing page with links for English and Spanish. The links work fine on Explorer, but are inactive on Firefox. Can you check it out: http://mediamark.net/mls4panama/ Thanks