Updating A Structure using ABAP Program

Hi,
V r using a structure...IOOPCOMP, in COOIS Transaction.
its fetching data from MARA, and other tables too. V want a new Field included in IOOPCOMP, from MARA, and get it Updated.
There's no user exit available for COOIS.
Its urgent.
Pls Do let us know How to proceed.
Regards,
Ajaz

Hi Ajaz
There is an Append Structure <b>ZRESB</b>. Try inserting your new field with the same name as in MARA to it. However, I am not sure whether it wil be filled.
Hope this solves your problem.
Kind Regards
*--Serdar
[email protected]

Similar Messages

Can a transaction be called in background dynamically using ABAP program??

Hi Experts,
Can a transaction be called in background dynamically using ABAP program without BDC???
Regards,
Mansi.

u can create job dynamically through programming..Try this sample code..
data: jobname like tbtcjob-jobname value
                             ' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
      host like msxxlist-host.
data: begin of starttime.
        include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
Job open
call function 'JOB_OPEN'
       exporting
            delanfrep        = ' '
            jobgroup         = ' '
            jobname          = jobname
            sdlstrtdt        = sy-datum
            sdlstrttm        = sy-uzeit
       importing
            jobcount         = jobcount
       exceptions
            cant_create_job = 01
            invalid_job_data = 02
            jobname_missing = 03.
if sy-subrc ne 0.
                                       "error processing
endif.
Insert process into job
SUBMIT zreport and return               << Here it is a static call but u can make it dynamic
                with p_param1 = 'value'
                with p_param2 = 'value'
                user sy-uname
                via job jobname
                number jobcount.
if sy-subrc > 0.
                                       "error processing
endif.
Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
       exporting
            event_id             = starttime-eventid
            event_param          = starttime-eventparm
            event_periodic       = starttime-periodic
            jobcount             = jobcount
            jobname              = jobname
            laststrtdt           = starttime-laststrtdt
            laststrttm           = starttime-laststrttm
            prddays              = 1
            prdhours             = 0
            prdmins              = 0
            prdmonths            = 0
            prdweeks             = 0
            sdlstrtdt            = starttime-sdlstrtdt
            sdlstrttm            = starttime-sdlstrttm
            strtimmed            = starttimeimmediate
            targetsystem         = host
       exceptions
            cant_start_immediate = 01
            invalid_startdate    = 02
            jobname_missing      = 03
            job_close_failed     = 04
            job_nosteps          = 05
            job_notex            = 06
            lock_failed          = 07
            others               = 99.
if sy-subrc eq 0.
                                       "error processing
endif.
Regards,
JOy.

Is it possible to reset password for any user using abap program

Hi friends,
Is it possible to reset password for any user using abap program by specifying client number and user id. in selection screen.
if any code for that to reset password please mail me.
Thanks & Regards,
Yogesh

Hello Yogesh,
Yes you can reset the password for any body using ABAP Code. But for that you really don't need any client number.
If this process is on regular basis, then recommended is to use BAPI for changing the user details Otherwise BDC also works fine.
=> Function Module - BAPI_USER_CHANGE
Call this in the program for resetting the password.
=> CALL TRANSACTION 'SU01' USING InternalTable
This will be executed in the BDC of SU01 transaction recording. Use the Password Change button in the application toolbar of transaction while recording.
Hope this helps.
PS If the answer solves your query, plz close the thread by marking it solved and rewarding each reply.
Regards

Synchronizing Two Custom Z Tables Using Abap Program

Hi,
    My requirement is Synchronizing two custom z tables using abap program me.
I have vendors in two tables, i have to select the common vendors from first which are existing in second table also.
In first table each vendor can have more than one supplier types in one field only. In second table these supplier types are divided into
different fields.
     My requirement is I have to check supplier types in first table and i have to pass X to corresponding supplier types in second table vendor.
I have to pass X value for each depending in Second table depending upon supplier type in first table.
. How to do it can any one suggest with code.
Thanks in Advance,
Vivek
<subject edited by moderator>
Message was edited by: Manish Kumar

Hi,
Imho, you need to get (meaning, extract into separate fields) the different supplier types from Table1 first. Your key for Table1 is the vendor no, which is also the key in Table2 (or the key for Table2 is Vendor no & Type).
For better performance, better select multiple/all required entries from Table1 instead of doing a select endselect.
Depending on the format of the vendortypes in Table1, put them in a new itab (for our purpose named Table1New where vendor no & type are the only 2 fields. For example, if the type length is fixed to 2 chars, or divided by space,... use your coding accordingly.
Next step is to select all vendor no's in Table2 which you have selected in Table1. If in Table2, the vendor no is the only key (and the all vendor types are filled in a single record), then loop check the vendor types from Table1New against the types in Table2.
If the key of Table2 is vendor no & vendor type, then do a read table for the key.
The logic in pseudo-code:
Select from Table1 into table. If you'd like to limit the selection size, add package size statement.
     extract the vendor types in to itab Table1New.
     Select the vendor & types from Table2 by using the for all entries option (better performance).
     loop at Table1New
          check in Table2:
               if the unique key is vendor no: check all fields for the vendor type from Table1New
               if the unique key combo is vendor no & type: check by using a read table.
          If not found => add entry to Table2
     endloop.
endselect Table1 (when using package size)
I guess the most difficult step is to extract the types from Table1 into separate fields, all the rest seems straight forward. Please keep in mind the itab type definitions for a better performance.
Good luck!
Best regards,
Zhou

Regarding structure of abap program

hi,
can any one exaplain to me what is the structure of the abap program.
thank&regards,
ramnaresh

Hi..
This is the Structure of ABAP program.
REPORT <NAME>.
**Global Data definitions
TYPES:
DATA:
**Selection Screen Definition
SELECT-OPTIONS
PARAMETERS
**Event Blocks
INITIALIZATION .
   perform X.
START-OF-SELECTION.
   perform Y.
****Form routines definition
FORM X.
ENDFORM.
FORM Y.
ENDFORM.
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

Structure of ABAP program

hi SDNs,
           what is the typical structure of an ABAP program?
           thanks and regards,
               aravind.

hi
plz check the structure of ABAP Program under..
http://help.sap.com/saphelp_47x200/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm
below the typical structure...
1.data declaration
2.selection-screen declartion
3.data validation
4.output.
Cheers
Abdul Hakim

Fork in process chain using ABAP program

Hello everyone.
I need a fork in my chain. Depending on the values in some db table I will make a decision: do some process or skip and go further. The only solution I can see is using ABAP program. But unfortunately It doesn't return status. Any suggestion will be appreciated.

Hi,
You have few process to run after the abap program. So make all those process as a different chain, and at the end of the ABAP program include a function module to trigger this chain, based on your condition.
If you like this idea, please revert for more information.
Hope this helps.
Thank you,

Unzip files using ABAP program

Hi All,
Can anybody guide me how to Unzip a .zip file using ABAP program... Appreciate your immediate reply...
actually, my scenario is to check whether zip file is created in appl.server or not.., and if zip file created then i need to check whether its blank file or any content exist inside the file...
Thanks in advance
Bhasker

hi
good
parameters: command(236) lower case.
data: std_lines(255) occurs 0 with header line.
call function 'RFC_REMOTE_PIPE'
    destination 'SERVER_EXEC'
    exporting
      command = command
      read = 'X'
    tables
      pipedata = std_lines
    exceptions
      communication_failure = 1
      system_failure = 2.
You should put your Unix command in the command parameter. "gunzip /yourfilepath/yourfilename" works on my Unix system. Once you determine the proper Unix command, you should be set. This technique is also nice because it provides you with echos back from Unix in table std_lines. For more complex Unix activity, you may want to consider throwing together a Unix script, and calling that via this code.
reward point if helpful.
thanks
mrutyun^

Access table using ABAP program in other database

Dear SAP Expert,
We have requirement that related to SAP interface.
Our SAP system run on Oracle database 11g (Unix).
Illustration: SAP system = A non SAP system = B
We need to access a table using ABAP program (from SAP system A) in other database (system B) that are not necessarily SAP database. The non-SAP system using SQL Server 2008 (Windows).
What is the best practice for this interface
Do we need database link? If yes, please help to inform me the details step to configure it.
Thanks and Regards

Hi Friend,
You try using an intermediate system..passing your input required to fetch the data..and PI should call the respective query to retrive record..once the full flow is completed you should get the return through some table in the calling program.
else.
ask the other system guy to write a function with select query and ask him to expose as RFC and that RFC we have to call it as RFC in our program to get the required values and only thing we need here is a proper connector in place.
Regards
S.Janagar

How to print external file using ABAP program

Hello
I want to print an external file which is located in server (
20.99.0.18\GUI\xyz\8.0QUALITY\QM_TS.DOC) .....i want to print these kind of files(which i have retrieved from table 'DRAW' field 'filep' )......i need to print these files using ABAP program.
thank you
Vikram.
Message was edited by:
Vikram Bojja

extract the data and pass to script or smartform for printing

HOW TO creat BAR CHART using ABAP Programming

DEAR ALL,
I want some help as to how to creat GRAPHICAL display using ABAP programing (BAR CHART) any sample codes Example will be very helpful.
Regards,
VJ

On earlier versions, you can do something like this.
[code]
REPORT ZRICH_0005 .
DATA: BEGIN OF ITAB_DATA OCCURS 0,
           DATANAME(15),
           QUANTITY1 TYPE I,
           QUANTITY2 TYPE I,
           QUANTITY3 TYPE I,
      END OF ITAB_DATA.
Data: BEGIN OF ITAB_OPTIONS OCCURS 0,
           OPTION(20),
      END OF ITAB_OPTIONS.
ITAB_DATA-DATANAME = 'Maple'.
ITAB_DATA-QUANTITY1 = 5500.
ITAB_DATA-QUANTITY2 = 6200.
ITAB_DATA-QUANTITY3 = 5900.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Oak'.
ITAB_DATA-QUANTITY1 = 3500.
ITAB_DATA-QUANTITY2 = 5200.
ITAB_DATA-QUANTITY3 = 4400.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Cherry'.
ITAB_DATA-QUANTITY1 = 1800.
ITAB_DATA-QUANTITY2 = 2200.
ITAB_DATA-QUANTITY3 = 1900.
APPEND ITAB_DATA.
CALL FUNCTION 'GRAPH_MATRIX_3D'
     EXPORTING
          COL1        = 'Jan'
          COL2        = 'Feb'
          COL3        = 'Mar'
          TITL        = 'Lumber Usage in $'
     TABLES
          DATA        = ITAB_DATA
          OPTS        = ITAB_OPTIONS
     EXCEPTIONS
          OTHERS      = 1.
[/code]
Regards,
Rich Heilman

Name the infotypes we uplode using abap programs

Hi,
can anyboby let me know, Name the infotypes we uplode using abap programs?
Thanks

IT0008
IT0045
IT0589 ETC
some of them can be made through LSMW also but we use BDC . the main reason is we wont find Feilds to upload those data in templates

How to Move file / call UNIX command using ABAP Program

Hi, ABAP Guru.
I need to Cut & Paste file (Move file from one location to another location) on Network Shared Drive using ABAP program.
But I can't figured out how to do this and what ABAP Command / FM / Method (and maybe UNIX command) that being used.
Please give me the advice.
Best regard and Thank you all.
Nattapash C.

all methods for your requirements should be in class CL_GUI_FRONTEND_SERVICES

How to use structure in ABAP program

I developing a report in smartforms but i want some fields to be display on the report but unable to find the relvent table as the field is show in structure.i can not find the actual table . is there any specfic way to find the table .or is there any way to use the fields defind in structure in my ABAP program.

Hi,
May be iam not clear with the question. But why you want to use structure. In report you can define your own structure, also you can declare your fields directly using standard datatypes.
Hope this will help!!!
Amol

Updating Q and P table of master data using ABAP program

Hi All
I have a requirement to update Q and P table(non key and non date fields) of master data using an ABAP program.
Is this something recommended?
Will there be any issues if I do that?
Thanks
Deepak

Thanks Vikram. Ok. My look up is on some other master data Q table and that is the reason why I asked about ABAP custom program.
Look like I will have to do the following approach.
Load the required supporting master data to BW.
Execute Attribute change run process for those master data objects.
Load the actual master data and look up on supporting master data.
Execute attribute change run process.
This process takes me long time and I am trying to reduce the overall execution time. let me know if you have some good suggestions.
Thanks
Deepak

Updating A Structure using ABAP Program

Similar Messages

Maybe you are looking for