Updating A'ware 5 runfiles

We have a very large training course written in A'ware 5.1 or
5.2. A single .exe file (Main Menu) runs numerous .a5r topic files
and associated .a5l libraries.
I have to update a relatively small proportion of the files
(NOT including the .exe) and the owner/client would prefer to
redeploy only the CHANGED files into their distribution system,
leaving the unchanged files as is. No problem here if I use A'ware
5.2 of course - just replace the changed .a5r and .a5L files.
However, the client may want me to use A'ware 7 to make the
changes. Would a few A'ware 7 run files perform from a modified
.exe file set up to run a mix of A'ware 5 and A'ware 7 run files. I
would guess not, but haven't tested this and am hoping someone else
might know.
Any input appreciated here - incidentally none of this
involves website/Intranet access.
Tom Buckle
The Learning Group
Sydney Australia

If the modules are packaged as .exe files (i.e. with the
Appropriate
Runtime) you can then jumpOut to them. If there are a5r or
a7r files
(without runtime) at all then this will not work. It would
probably be
easier to maintain and manage it all by either upgrading the
whole
project to 7 or doing updates / edit in 5.2.
Mark
Oldtom wrote:
> We have a very large training course written in A'ware
5.1 or 5.2. A single
> .exe file (Main Menu) runs numerous .a5r topic files and
associated .a5l
> libraries.
>
> I have to update a relatively small proportion of the
files (NOT including the
> .exe) and the owner/client would prefer to redeploy only
the CHANGED files into
> their distribution system, leaving the unchanged files
as is. No problem here
> if I use A'ware 5.2 of course - just replace the changed
.a5r and .a5L files.
>
> However, the client may want me to use A'ware 7 to make
the changes. Would a
> few A'ware 7 run files perform from a modified .exe file
set up to run a mix
> of A'ware 5 and A'ware 7 run files. I would guess not,
but haven't tested this
> and am hoping someone else might know.
>
> Any input appreciated here - incidentally none of this
involves
> website/Intranet access.
>
> Tom Buckle
> The Learning Group
> Sydney Australia
>

Similar Messages

  • Customizing AM Images & Facing Problem in Update & Deploy War files

    Hey Guys!
    This is Yash Bansal from Gurgaon, India. i am new to access manager. i am now customizing it and facing problem in customizing.
    I have customized images which is present in directory path:
    opt/SUNWam/web-src/services/images/
    and updated services.war file which is present in directory path:
    opt/SUNWam/war/
    with command
    jar -uvf services.war /opt/SUNWam/web-src/services/images/login-backimage.jpg
    then deployed configuration from the web server 7.0 admin console.
    after that when i open the url
    http://<hostname>/amserver/console
    then Page Not Found error comes in the browser.
    Just wanted to ask you guys am i doing the steps right. please help if someone know how to update and deploy war file on Sun Web server 7.0.
    Thanks & Regards,
    Yash Bansal

    Hi!
    Deploying the configuration does not (re)deploy the application. Webserver stores a copy of the deployed application and all configurations in the admin instance. When you change anything in the webserver console it is first written there and only applied to the productive instance when you deploy configuration.
    When you add images, jsps or something else to /opt/SUNWam/... and want it redeployed you have to use amconfig command. in /opt/SUNWam/bin there is a file called amsamplesilent. You have to fill the values in this file and then use
    ./amconfig -s amsamplesilent
    I believe for a redeploy you have to set DEPLOY_LEVEL to 21, not sure here, check documentation.
    I personally usually do not redeploy for images and such, I simply copy them directly the deployed location.
    Why http://.../amserver/console does not work anymore, I have no idea. But at least after a redeploy it should be there again.
    hth Chris

  • How to update a war file safely

    Hi,
    I have a war file that has some files in it. I would like to update the war file to replace an existing web.xml file and add a new file in a different directory.
    I know that i can simply unzip the file and make the changes then zip it back again.
    I would like to do this using Ant but i was wondering if it is possible to do the update with only the updated files. I think the way ANT would work is it would check every file on the new directory and replace it if it is newer. The problem i have is i dont have copies of the existing files in the war file. I only have the files i want to replace in the war file. If i try it, will i end up with a new war file with just the new files and everything else deleted or will it just update the new file?

    Hi,
    Thank you for your response.
    A zip file is not really what i was querying about. I am working with a war file (Which is deployable on the application server) which is what i was asking about and probably why i didnt look at the zip task when i looked at the manual.
    I am using the war task to create the war file. When i looked at the manual (and googled it) i did find that i could use the update=true property on the war task to update the war file. Maybe i should have rephrased my question in another way. What i wanted to ask was if i use the update=true property will it:
    1. Update the war file with the new files and leave everything thing else unchanged.
    2. Replace the war file with a new one with just the new files.
    3. What happens if the new file i want to include has an older timestamp?
    As i mentioned earlier, i also know that i can rename the war file with .zip extension, unzip the war file using winzip, make the necessary changes and zip it back and rename it to a .war file. I dont really want to do this as it doesnt feel like its the right way to do it.
    Apologies if my initial post was not clear enough.

  • Dynamic Update of .war files or .ear files

    Hello,
    I don't see this ability in the current servlet spec. I was wondering if someone has come up with a way to implement the following idea.
    I'd like to dynamically update, add, and remove files from a .war file that is running in X servlet engine/application server. An example is adding new HTML files on the fly, or new Style Sheets. The files that I'm trying to add are not class files or any executable files.
    If you have any thoughts on how to do this or have done this, please let me know.
    Thanks for you help,
    d.bretenfeld

    It depends on what webserver you're using, and how you configure it.
    With Tomcat 4.0, each .war file on startup is extracted to it's own directory and from there any modifications have to be done with the actual files. the .war file is no longer used except as a backup.
    Now, with something like JBoss + Tomcat, the .war file is hot deployed anytime a new .war file is copied into the deploy folder. Personally I love this feature, as it forces you to actually "deploy" an application with updates all at once. And actually, you can get around this and modify individual files, but I wouldn't recomend it.
    So, as is the answer with so much of Java and J2EE, it all depends on your setup and configuration! =)
    I'd be happy to help you out more if you need anything else!

  • HT1338 Update soft ware

    Please I need update my soft ware

    This is too vague...
    Deng5dove wrote:
    Please I need update my soft ware
    More Details about the Update you want to do and on what equipment and/or device

  • Issue updateing firm ware on a 7942 phone

    Hello All,
    I am working for a company that is purchasing refurbished 7942 phones for their system  Several of the phones have firmware that is two old and cannot be upgraded to the current ccm version.  I am not allowed (company policy) to install an older version on CCM so I am using tftp on a cisco 881 router to do the upgade to the jumper version that will allow me to up grade on ccm.
    Current config on router
    Current configuration : 2048 bytes
    ! Last configuration change at 16:18:38 UTC Thu Feb 6 2014
    ! NVRAM config last updated at 16:18:40 UTC Thu Feb 6 2014
    ! NVRAM config last updated at 16:18:40 UTC Thu Feb 6 2014
    version 15.1
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Router
    boot-start-marker
    boot-end-marker
    enable password cisco
    no aaa new-model
    memory-size iomem 10
    crypto pki token default removal timeout 0
    ip source-route
    ip dhcp pool vlan 2
    network 192.168.1.0 255.255.255.0
    default-router 192.168.1.1
    option 150 ip 192.168.1.1
    ip cef
    no ipv6 cef
    multilink bundle-name authenticated
    license udi pid CISCO881-K9 sn FTX153381AE
    interface FastEthernet0
    switchport access vlan 2
    no ip address
    interface FastEthernet1
    switchport access vlan 2
    no ip address
    interface FastEthernet2
    no ip address
    interface FastEthernet3
    no ip address
    interface FastEthernet4
    no ip address
    shutdown
    duplex auto
    speed auto
    interface Vlan1
    no ip address
    interface Vlan2
    ip address 192.168.1.1 255.255.255.0
    ip forward-protocol nd
    no ip http server
    no ip http secure-server
    tftp-server cnu41.8-4-0-79.sbn
    tftp-server cvm41sccp.8-4-0-79.sbn
    tftp-server dsp41.8-4-0-79.sbn
    tftp-server jar41sccp.8-4-0-79.sbn
    tftp-server SCCP41.8-4-1S.loads
    tftp-server term41.default.loads
    tftp-server apps41.8-4-0-79.sbn
    tftp-server cmterm_7936.3-3-20-0.bin
    tftp-server XMLDefault.cnf.xml
    tftp-server XMLDefault_polycom.cnf.xml
    tftp-server SEP0004f2e246cd.cnf.xml
    tftp-server SEP0004f2e246cd_polycom.cnf.xml
    tftp-server flash:apps42.8-5-3ES4.sbn
    tftp-server flash:cnu42.8-5-3ES4.sbn
    tftp-server flash:cvm42sccp.8-5-3ES4.sbn
    tftp-server flash:dsp42.8-5-3ES4.sbn
    tftp-server flash:jar42sccp.8-5-3ES4.sbn
    tftp-server flash:SCCP42.8-5-3SR1S.loads
    tftp-server flash:term42.default.loads
    tftp-server flash:term62.default.loads
    control-plane
    line con 0
    line aux 0
    line vty 0 4
    password cisco
    login   
    transport input all
    end
    Cisco IOS version -> Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
    If I hook up the phone to the router and have not done a factory reset I get the following log:
    Feb  6 15:15:17.959: TFTP: Looking for CTLSEP0023EBC81FB8.tlv
    Feb  6 15:15:18.027: TFTP: Looking for SEP0023EBC81FB8.cnf.xml
    Feb  6 15:15:18.071: TFTP: Looking for XMLDefault.cnf.xml
    Feb  6 15:15:18.071: TFTP: Opened flash:XMLDefault.cnf.xml, fd 0, size 3814 for process 269
    Feb  6 15:15:18.083: TFTP: Finished flash:XMLDefault.cnf.xml, time 00:00:00 for process 269
    Feb  6 15:15:24.547: TFTP: Looking for cmterm_7936.3-3-20-0.loads
    Feb  6 15:15:39.023: TFTP: Looking for CTLSEP0023EBC81FB8.tlv
    Feb  6 15:15:39.079: TFTP: Looking for SEP0023EBC81FB8.cnf.xml
    Feb  6 15:15:39.131: TFTP: Looking for XMLDefault.cnf.xml
    Feb  6 15:15:39.131: TFTP: Opened flash:XMLDefault.cnf.xml, fd 0, size 3814 for process 269
    Feb  6 15:15:39.143: TFTP: Finished flash:XMLDefault.cnf.xml, time 00:00:00 for process 269
    Feb  6 15:15:40.455: TFTP: Looking for English_United_States/mk-sccp.jar
    Feb  6 15:15:40.551: TFTP: Looking for United_States/g3-tones.xml
    The phone hangs at the last line then reboots to start the process again.   I am also wondering why it is looking for 
    cmterm_7936.3-3-20-0.loads instead of the 7942 loads.
    If I do a factory reset prior to the upgrade attempt I get the following event log.  (phone is in the upgrade screen during this)
    Feb  6 16:59:53.559: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
    Feb  6 16:59:54.559: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
    Feb  6 17:00:22.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan2, changed state to up
    Feb  6 17:00:31.931: TFTP: Looking for term42.default.loads
    Feb  6 17:00:31.935: TFTP: Opened flash:term42.default.loads, fd 0, size 662 for process 269
    Feb  6 17:00:31.935: TFTP: Finished flash:term42.default.loads, time 00:00:00 for process 269
    Feb  6 17:00:33.259: TFTP: Looking for term42.default.loads
    Feb  6 17:00:33.259: TFTP: Opened flash:term42.default.loads, fd 0, size 662 for process 269
    Feb  6 17:00:33.263: TFTP: Finished flash:term42.default.loads, time 00:00:00 for process 269 Feb  6 16:59:53.559: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
    The phone then reboots hangs for several minutes than repeats with the same event logs.  . 
    Any help that can be offered would be greatly appreciated. 
    Thank you
    John

    I have tried what you have suggested and got the following results.
    Phone without factory reset.   firmware - 8-3-2-27  no apparent change
    Feb  7 16:32:37.425: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
    Feb  7 16:32:38.425: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
    Feb  7 16:33:06.445: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan2, changed state to up
    Feb  7 16:33:10.285: TFTP: Looking for CTLSEP081FF3621B99.tlv
    Feb  7 16:33:10.345: TFTP: Looking for SEP081FF3621B99.cnf.xml
    Feb  7 16:33:10.393: TFTP: Looking for XMLDefault.cnf.xml
    Feb  7 16:33:10.397: TFTP: Opened flash:XMLDefault.cnf.xml, fd 0, size 3814 for process 169
    Feb  7 16:33:10.405: TFTP: Finished flash:XMLDefault.cnf.xml, time 00:00:00 for process 169
    Feb  7 16:33:17.317: TFTP: Looking for cmterm_7936.3-3-20-0.loads
    Feb  7 16:33:32.549: TFTP: Looking for CTLSEP081FF3621B99.tlv
    Feb  7 16:33:32.649: TFTP: Looking for SEP081FF3621B99.cnf.xml
    Feb  7 16:33:32.697: TFTP: Looking for XMLDefault.cnf.xml
    Feb  7 16:33:32.697: TFTP: Opened flash:XMLDefault.cnf.xml, fd 0, size 3814 for process 169
    Feb  7 16:33:32.709: TFTP: Finished flash:XMLDefault.cnf.xml, time 00:00:00 for process 169
    Feb  7 16:33:34.361: TFTP: Looking for English_United_States/mk-sccp.jar
    Feb  7 16:33:34.529: TFTP: Looking for United_States/g3-tones.xml
    Phone with factory reset - firmware  8-3-1-22 - I tried 3 phones.  2 with unknown firmware as the phone had already been factory reset and onwe with the firmware listed above.  1 had one of the unknown phones work the other two are giving me the events listed below and then reboots for the same process. 
    Feb  7 17:07:22.289: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
    Feb  7 17:07:50.305: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan2, changed state to up
    Feb  7 17:07:59.677: TFTP: Looking for term42.default.loads
    Feb  7 17:07:59.677: TFTP: Opened flash:term42.default.loads, fd 0, size 662 for process 169
    Feb  7 17:07:59.681: TFTP: Finished flash:term42.default.loads, time 00:00:00 for process 169
    Feb  7 17:08:00.989: TFTP: Looking for term42.default.loads
    Feb  7 17:08:00.993: TFTP: Opened flash:term42.default.loads, fd 0, size 662 for process 169
    Feb  7 17:08:00.993: TFTP: Finished flash:term42.default.loads, time 00:00:00 for process 169 Feb  7 17:07:22.289: %
    Once the phone has started the factory reset (upgrading process) is there a way that check the firmware.  Also I am not sure if it matter.  The phones were all set maunally to enable 802.1x.  Do I need to disable that prior to starting the firmware upgrade.  I found the phone that did work had that feature disabled after it came back up. 
    Thank you
    John

  • HT1386 I updated soft ware on my sisters phone now her phone wants my itunes acct.  HELP please

    I updated my sisters iphone using my computer. I opened up her itunes when I did it. Now it wants MY acct password for her to download stuff. HELP me fix this.

    Settings>Store...tap the ID shown...sign out...now sign back in using her Apple ID/password.

  • HT4623 Update soft ware iOS 6.1.3

    I can't installing software iOS 6.1.3 there is notice "an error accurrated"

    What iOS version is currently installed? What did the error message say?
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • After today latest update Firefox doesn't load Mafia Wars (on Facebook), but it loads other web sites. Chrome loads it alright.

    After latest (today) Firefox automatic update Mafia Wars doesn't load on Firefox. Other sites do load ok. Chrome loads Mafia Wars ok.
    I can't load Mafia Wars from Facebook, neither from Zynga directly. Only think I get is a blank page.
    I downloaded and installed latest Java and Flash to no avail.

    This issue exists for me on a clean installation of Windows 7 64bit running Firefox 7.0.1 with all addons disabled and the cache cleared out. Even with additional cleaning using CCleaner the problem persists.
    This problem also exists on my work Win7 64bit box running Firefox 6.0.2 and Windows XP Pro SP3 running Firefox 7.0.1.
    My roommates who run Windows Vista are unaffected.

  • Weblogic 10.3 | Individual WAR update on EAR

    Hi All,
    We have an EAR deployed in Weblogic 10.3 which contains 4 WARs .
    Whenever we need to update a WAR in the EAR we are updating the whole EAR with the new WAR included and updating the EAR thru WL console.
    Is there any way to update individual WARs thru console without affecting the working state of other WARs inside the EAR ?.
    Thanks in advance,
    Appasamy

    Hi Appasamy,
    Weblogic provides Partial Deployment feature which u can use ....
    http://download.oracle.com/docs/cd/E11035_01/wls100/deployment/redeploy.html#wp1025747
    Thanks
    Jay SenSharma
    http://weblogic-wonders.com/weblogic (WebLogic Wonders Are Here)

  • CrossContext and WAR unpacking not working in the same context Tomcat 4.0.6

    I need an application to be able to crossContext so I entered a context tag in my server.xml file.
    However when I added the entry tomcat no longer unpacked the .war file. If I changed the path value in the context tomcat unpacked the war but then the crossContext would not work.
    Is there a way make the two work together?
    Here is a copy of the entries and what they achieve:
    <Context path="myApp" docBase="myApp" debug="0" crossContext="true"/> this will unpack the war but the app will not crossContext.
    <Context path="/myApp" docBase="myApp" debug="0" crossContext="true"/> will allow the app to crossContext but if I update the war and remove the myApp dir under webapps it will not extract the war file.
    Incidently the host tag has unpackWARs="true"
    Ideas anyone? It's a hassle to start the server twice each time, one to unpack and 2 to allow the crossContext.

    PS: Does anyone know how to edit your email address in your profile? I can't seem to do it through the settings link.

  • How to display images on local disk(outside of WebContent of WAR) in jsp?

    In a web application, I want to display images on local disk(outside of WebContent of WAR) in jsp. I couldn't put it in "WebContent/images/" because the images are portraits of users and they could be changed dynamically. If I put images in "WebContent/images/", I have to transfer the images back and forth every time when I update my WAR file.
    Obviously, in jsp, something like
    "<img src="/home/username/images/local/PRTR.jpg" />"
    doesn't work.
    Is it durable to store the images at somewhere else like "/home/username/images/local/" in the server's local disk?

    Hi aiGrace,
    You have to transform your file path into the appropriate URL, this way :
    try {
        File file = new File("D:/Test/MyPic.jpg");
        System.out.println(file.toURI().toURL());
    } catch (MalformedURLException ex) {
        ex.printStackTrace();
    }Then, you insert the URL in your img tag.

  • How to include .xml on .war generated by jwsc?

    Hello there!
    When i build my web service i cannot be able to put in the war file my .xml files they are copy out of the war :__ I need those files because are for ibatis
    This is my build.xml
    <target name="build.WebService">
         <jwsc
         srcdir="${src.dir}/ActivacionBlackBerryWS"
         destdir="${dest.dir}"
         keepGenerated="yes" >
              <module contextPath="test" name="testWS">
                   <jwsfileset srcdir="${src.dir}/testWS">
                        <include name="**/*.java" />
                   </jwsfileset>
              </module>
         </jwsc>
                        <copy todir="${dest.dir}">
                        <fileset dir="${src.dir}/testWS" excludes="**/*.java"/>
                        </copy>
    </target>
    i have 2 packages... 1 for web service and the other one with sqlMapConfig.xml and statements.xml
    and the result is a .war with my WS but out of this files are the package with the .xml
    what can i do??
    thanx in advance

    Hi,
    Try using the following to Update your WAR/EAR file...:
    <taskdef name="jwsc" classname="weblogic.wsee.tools.anttasks.JwscTask" />
        <target name="build-target">
            <jwsc srcdir="src" destdir="${ear-dir}" listfiles="true">
                 <jws file="TargetImpl.java" compiledWsdl="${cowDir}/target/Target_wsdl.jar" type="JAXWS"/>
            </jwsc>
    <font color=maroon>
             <zip destfile="${ear-dir}/jws.war" update="true">
                 <zipfileset dir="src/examples/webservices/callback" prefix="wsdls">
                     <include name="Callback*.wsdl"/>
                 </zipfileset>
             </zip>
    </font>
        </target>
    For real demo of this <Zip> tag please refer to : http://weblogic-wonders.com/weblogic/2010/01/09/username-token-in-jaxws-webservice/
    Thanks
    Jay SenSharma
    http://weblogic-wonders.com/weblogic/webservices/  (WebLogic Wonders Are Here)

  • HT204053 I don't have "update software" under general in my settings. Is it somewhere else.

    Help how do you update soft ware on the iPad

    - Ensure that you're using the latest version of iTunes.
    - Connect your device to your computer using the USB cable.
    - After iTunes opens, select your device when it appears in iTunes under Devices.
    - Click "Check for Update" in the Summary pane to check for available updates.
    - If an update is available, iTunes prompts you to download and install the update.
    - Finished

  • How to update my Nokia 500?

    How do I update Soft Ware (actual 111.020.0059). My network operator has no recent updates. Is it possible to upgrade without losing the warranty.

    If your network has no new updates for your phone then you are on the most recent version for your handset. Attempting to update your phone to a version not approved by your network will indeed void your warranty and potentially damage your phone. 
     Also it isn't permitted to discuss non approved methods of flashing phones on this forum.
    Ray.

Maybe you are looking for