Updating an App in Single Application Mode for Surface (Windows 8.1 RT)

I have a Windows Store App running on a Surface (Windows 8.1 RT) in
Kiosk Mode (Single Application Mode).
I've put a new release out on the store for this Windows Store App. Is it possible for a Surface, running this app in kiosk mode, to
automatically update the app to this new release? (Like I would expect a normal windows 8.1 installation to do)
Until now, i've had to remove the kiosk mode, go to the Store and update it manually. Then restoring the kiosk mode.

Hi,
As far as I know, there is no way to update an APP in kiosk mode untill now. Hope this problem can be resolved in the future.
Roger Lu
TechNet Community Support

Similar Messages

SCCM Software Updates (and SCUP) vs. Application Management for 3rd Party Application Patching

Hi,
We're getting ready to tackle the phenomena known as Java patching, and I was wondering if I could get your personal preference; SCCM Software Updates (and SCUP) vs. Application Management for 3rd Party Application Patching?
I probably should give a little background on my environment; It's a university atmosphere, so unless it's policy, you have to ask nicely...can't tell people to do things they don't want to; multiple version of required versions of Java for what ever reason,
which need to be identified, grouped together, and then upgrade as much as possible without breaking their old applications.
I was thinking that Application Management probably made more sense where it is more robust, especially for removing multiple installs of Java on a single system, but Software Updates/SCUP looks like it was built for this type of patching, so I'm a bit confused
why SCCM would have two components which essentially did the same thing.
Your thoughts?
Thanks,
Bill

For Java version management specifically you can already achieve a lot by using the Application Model in CM12.
You can define supersedence between the different versions, just make sure to opt for uninstall of the older version when defining it.

I am trying to update my apps. When it prompts for my password my old deleted email address comes up. I don't even rember the password for that old email. How can I get to update my apps with my current email?

I am trying to update my apps. When it prompts for my password my old deleted email address comes up. I don't even rember the password for that old email. How can I get to update my apps with my current email?

All apps are tied to the Apple ID they are purchased with and is not transferable.
Delete app and download app with your new Apple ID.

I am trying to update my apps but it is asking for my card details and when i enter them it says my card was declined but i havent bought anything, can i see what the purchase is for?

I am trying to update my apps but it is asking for my card details and when i enter them it says my card was declined but i havent bought anything, can i see what the purchase is for?

Again, Apps will always be tied to the account from which they were purchased and will always have to be updated using that account.
Always, mean exactly that, always.
If you want them to be on your account then you need to buy them using your account.

Is there a way to switch to single-user mode for screen sharing in Lion?

Hello,
with the new multiple user mode one screen sharing guest can not see the mouse cursor of another - even if they use the same login.
It's a pity, because we use screensharing to discuss the content of the screens with multiple screen sharing users.
It is necessary to point with the cursor to show the other members of this 'screen sharing meeting' things while discussing.
This is not possible anymore with Lion and multi user screen sharing.
Does anybody know a patch or terminal command to switch back to single user mode for screen sharing?
Kind regards
Carl M.

Try using OmniDazzle to help draw attention to what you want:
http://www.omnigroup.com/products/omnidazzle/

Hey there i downloaded apps using another apple id than the one am using right now and i need to update the apps they keep asking me for the old one that i dont have any more what to do please

Hey there i downloaded apps using another apple id than the one am using right now and i need to update the apps they keep asking me for the old one that i dont have any more what to do please

Apps are permanently tied to the ID used to purchase them.
Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and re-set th password for the old one.
Then, log into the app store with it and update the apps purchased with that ID.

Had to change my id because of glitch. Now I can't update any apps because it keeps asking for my old id password. I've signed out

Had to change my id because of glitch. Now I can't update any apps because it keeps asking for my old id password.

I had one App to update, alleways whene i tryd to do so the App told me that the App was buyed with a different ID and the Update stopped.
Untill last night whene a finaly was able to update the App.
I only changed the Pasword so i thougt it may be the problem.
But, problem is solved!

Trying to update existing apps; will only prompt me for an old iTunes account that does not exist any more

How do I get a prompt for my new account when updating existing apps? I had used one of my sons account for most of the apps on my iPhone. I have since move up to a iPhone 4S and created my own account to use iCloud. But everytime I try to update the exiting apps I am prompted for a password to my sons account. I am logged on to iCloud with my new account at the same time.
It looks like the apps retain some kind of tag to the original account used during download.
Any help would be appreciated.

Change the account in the iPhones settings

I dont know what wrong with my Apple ID , when i tried to updated my apps and the always asking for payment?

i try to updated my apps and download free apps but my Apple id keep asking for payment, the exacly massage is " before you can make purchases you must tap OK , then verify your payment. before i used to have NONE but after i buy some Apps i put my debite card number. after that i want to change to be none again but None is not show... now i cannot update anything or even download free apps

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

Updated! App-V: A Configuration Template for Deploying to Stateless RDS Clients on Citrix Published Desktops with Citrix UPM for Profile Management

I've updated my App-V Startup script that I use. The new version includes Event Logging as well as detailed logging, and its in PowerShell finally)
Check out the wiki!
http://social.technet.microsoft.com/wiki/contents/articles/25318.app-v-a-configuration-template-for-deploying-to-stateless-rds-clients-on-citrix-published-desktops-with-citrix-upm-for-profile-management.aspx

I've updated my App-V Startup script that I use. The new version includes Event Logging as well as detailed logging, and its in PowerShell finally)
Check out the wiki!
http://social.technet.microsoft.com/wiki/contents/articles/25318.app-v-a-configuration-template-for-deploying-to-stateless-rds-clients-on-citrix-published-desktops-with-citrix-upm-for-profile-management.aspx

IPhone 4 - apps stuck in waiting mode for a week or more

I have an iPhone 4. After the most recent iOS update, I have three apps on my phone that are stuck in "waiting" mode. I can't start them, I can't delete them, they don't show up on my iTunes. I've emailed apple twice and they just ignore me Thanks for contacting support. We'll get back to you NEVER.

Are you on wifi? You can always sync with your PC if the apps are local and that would speed it up dramatically.

New features for next CC update: open apps, contextual menus, option-click for more info...

I'd like to see the CC app gain a few features that would enable a more efficient workflow right from the app:
1. Ability to open apps from the menu bar. I know we can stuff 'em in our Docks and open them in Spotlight, but being able to interact with our apps would be great. Perhaps each app could have its own gear/triangle, or each icon could be interactive; this would open a contextual menu from which we can open, delete, update, get help, maybe open recent docs....
2. Option-clicking an app icon could pop up more info (e.g., version, last used, etc)
3. Allow us to sort apps either manually or by automatic criteria (recently used, most used, recently updated, etc)
See attached PNG for concepts.Adobe Creative Cloud

https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bugs or feature requests is a better place to post

One shot (Single shot) mode for LM3S8962

Hss anyone successfully programmed a one-shot output pulse with an external interrupt? I am trying to program a one-shot output . I know that the input trigger is on CCP0. I am trying to understand how I can control an external pin to put out an accurate one-shot pulse, or will i just have to just use elemental I/O when servicing the interrupt?
I looked at this link already:
http://208.74.204.114/t5/LabVIEW-Embedded/Programming-timer-A-in-LM3S8962/m-p/1076794#M2113
I tried this:
I changed the TimerConfigure to "OS", but it still is periodic. I also used the timer config vi's to try to change the operation from periodic to single shot, it does not seem to work.
I am about to try this:
Thanks, George
P.S. I used an external trigger to generate an interrupt. In the interrupt, i turn on an elemental I/O bit, then I use an empty for-loop to do a delay, then i turn off the bit. If the external interrupt is asychronous, I get dither in my output pulse. If I use the internal PWM module and use this as the interrupt, then the output pulse is stable. It doesn't make sense.......

Try using OmniDazzle to help draw attention to what you want:
http://www.omnigroup.com/products/omnidazzle/

Showed error -9888 when trying to update my apps from itune application?, showed error -9888 when trying to update my apps from itune application?

We can not complete your itune store reqyuest. An unknown error occured (-9808).

In the course of your troubleshooting to date, have you worked through the following document?
iTunes Store: "An unknown error occured (-9808)"

Night mode for composition window?

Hello guys,
Is there an add-on, extension, or other add-on that would completely turn the entire Thunderbird interface into a consistent night mode (i.e., light or white color on black or dark background)? In particular, is there something that would convert panes, menus, etc. into a nocturnal mode?
Sincerely,
pkclown

I've not tried this but take a look at the theme 'Carbon Pro'
https://addons.mozilla.org/en-US/thunderbird/themes/abstract?sort=popular&page=2

Updating an App in Single Application Mode for Surface (Windows 8.1 RT)

Similar Messages

Maybe you are looking for