Updating applications for multiple users

I have set up multiple user accounts on my mac pro so that I can restrict my kid's access to applications and the web. Trouble is that I am unable to update his browser and flash plug-in. My default browser is Firefox 17.0, Flash Player 11.5.502.110 but his shows up as Firefox 3! I have scrolled through the Parental Controls: Allowed Apps list looking in vain for a way to select the *right* browser version, but nothing seems to work. Any ideas?

Thanks for responding, Kirk. Per your suggestion I checked the parental controls panel to see which apps folder was selected and found that there seemed to be no way to navigate to a particular folder. It simply offers an option named "Other Apps". Next I looked at the User/blah/Applications folder and found that there was none--so parental controls must be pointing to the HD/Applications folder.

Similar Messages

  • How do I install an application for multiple users?

    ... not only for the administrator...

    They are all set up for multiple users if they are in the applications folder.
    ...JER

  • Live video application for multiple users with RTMFP

    Hi
    We developed a live video application in Flex that uses RTMP. In one session up to 5 users are able to publish their stream and up to 20 users can join a group. For saving bandwidth costs and making use of lower latency with UDP we check RTMFP. From reading the documentation it seems that RTMFP multicast is the way to go.
    Our frist results and additional research surfaced two 2 issues:
    - Streams have a live delay (which seems to be multicastwindowduration + buffertime) that takes up to 30 sec to disappear but seems to increase again
    - The application allows one user to change the size of a published video (camera.setMode). This causes a freeze with RTMFP for the publisher and all subscribers. Changing the size several times can cause to make the video work again for the publisher and subscriber (some bugs are already reported here)
    For solving these issues I wonder:
    1.) Is RTMFP multicast able to deliver a low latency solution that is needed for face to face v/a communication?
    2.) if yes - are there any settings suggested by Adobe for the RTMFP NetStream multicast properties (like multicastwindowduration property) and if not can you give me some hints what would work for reduce the latency that face to face communication gets acceptable?
    3.) How to deal with the setMode issue - does this happen because I misconfigured RTMFP or is this API not supported? Will unpublish and publish solve the issue (what api series do I need to use to do so?)
    Best regards,
    Marc

    1) any practical use of P2P multicast will have a delay measured in seconds. it shouldn't go to 30 seconds unless you have a large NetStream.bufferTime.
    2) i strongly recommend against changing the multicast stream parameters. they all interact with each other. decreasing the window duration will decrease the effective reliability of the stream, by reducing the amount of time to receive all of the fragments of the stream as they pass through the P2P group -- especially when people join or leave the group, which can disrupt the low latency "push" trees that are constructed in the group.
    3) you should be able to change the encoding parameters on the fly without a major disruption. are you using H.264 or Sorenson Spark?  it's possible that your camera doesn't like to have its capture size changed and it is freezing temporarily.  i'm not having any trouble changing the capture size with my camera (and using H.264).  i recall there being some issue with changing the frames-per-second on the fly (at least some time ago, and i don't remember what the issue is) -- there was enough of an issue that i disabled it in my little app while actively publishing.

  • Installing applications for multiple users

    I apologize in advance if this is a dumb question. I am a longtime Mac user, but always on a single machine with a single user account. Now I have finally convinced my wife to make the switch to Mac and we will be sharing a new Mac Mini.
    My question is this. When I go to install a new application (like MS Office or iWorks), how do I install it so it is available to both users? My plan is to create an admin account and then a standard user account for my wife and for me. Would I move into the admin account to install software?
    Thanks in advance for any answers!

    As long as you install applications into their usual location: /Applications, the Applications folder at the root level of your computer's directory, the applications should be available to all users. You can install from any account, but you will have to supply admin authentication (username, password).
    charlie

  • Can i install itunes multiple times on one computer for multiple users?

    Can i install itunes multiple times on one computer for multiple users?

    Like most applications you only need to install it once for it to be available to all users. (That said it is possible to install an application and only make it available to the current user, but that's rarely needed.)
    tt2

  • How to run the the impersonation permission grant command for multiple users

    I have run below command earlier to grant the impersonation for a user called user1
    get-mailbox -identity user1 | add-adpermission -user domainname\service application user -ExtendedRights ms-Exch-EPI-May-Impersonate
    Now I want to run this command for multiple users like user2, user3, user 4 together. How should I run the command.
    This is for Exchange Server 2007 SP2
    Abhijeet M. Mohite

    Hi Abhijeet
    get-mailbox -identity user1 | add-adpermission -user domainname\service application user -ExtendedRights ms-Exch-EPI-May-Impersonate
    I am little bit confused with this command so can you please help me what to right inplace of User1 and domainname\service application user
    Example: I wanted to give Impersonate rights to
    [email protected] then can you please complete command for me.      Thanks in advance.
    Warm Regards, Pramod Kumar Singh Manager-IT

  • Changing Assignment Details for multiple user

    Hi everyone,
    In the RelationShips tab of a bundle, how can we change the "Assignment Details" for multiple user at once? Per exemple, I have a bundle that have about 100 user assignments. The bundle show on Start Menu but no on the Nal. If we want all of our users to have this bundle on the Nal Windows, how can we instruct that easily and quickly, instead of selecting each user and changing the Assignment Details ?
    thank you for your help !
    DM

    I am also trying to update the shortcut locations on many apps for a mass amount of users. Mr. Pond, or dominicm, can you explain or give a example ZMAN command that would be able to do this? From the documentation I can find it only seems to affect the distribution and scheduling but not the shortcut location.

  • Best way to set up a Mac laptop for multiple users with AD logins

    I am setting up a MacBook Pro running 10.4.11 that will be used as a "loaner" notebook for meetings, etc. The computer will be used internally at our company, so users will be logged into our network. Active Directory is set up on this computer to allow all domain users to log in using their own user name and password; this approach helps meet our company's security standards (we want to avoid using one common login or account for all users).
    While this approach seems to fit our needs, it causes problems when it comes to running applications. For instance, each new user is prompted to enter first-time usage information when launching an application (forcing them to contemplate registration information, various settings, etc.). I've given "everyone" read-write privileges to the HD > Library and the Applications folder, but this does not solve anything and may not be a good approach anyway.
    I would welcome any advice on the best way to set up this computer for multiple users logging in via Active Directory. Thanks!

    Where are you installing the third party applications? It sounds like they are being installed in the 'User 1' account, rather than the /Applications folder (admin or not, one user normally can not see into another user's folders). Repairing permissions only works for applications that have a file in /Library/Receipts, not on folders in general, so you would need to check the permissions for the folders in question.

  • Design forms for multiple users

    Dear sir
    I am developing new application for my company.I don't know how to desing the the tables for multiple users and how to give rights to users to access certain forms.This application will use in two differnet languages.
    how to switch one language to other languages
    give me some ideas
    thanks
    Dev

    ...how to desing the the tables for multiple users and how to give rights to users to access certain forms.
    There are several ways to do this. One way is to create different database accounts for each user, and give each user priviledges to the tables they need. (Your DBA may need to do this.) Then, when the users logs in, check who it is and call the appropriate form.
    how to switch one language to other languages
    This is a common question. See Experts Experience Required: Direction In 10g or search the forum for additional help.

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • Can we creat an Apple ID for multiple users?

    I work for a company where we are rolling out iPads in big amounts. The problem is that they all need an Apple ID in the training they get about the iPad they receive because they have to install MobiControl on it.
    It's no problem to let them create an Apple ID at home, but they have to fill in credit card numbers once they connect at work when they try to install apps. That's the problem... Not everyone want's or has credit cards...
    Maybe it's possible to create an Apple ID for multiple users???
    Thanks!

    iPad in Business and Education
    You may find a better answer in this part of the forum, since it's meant for situations like you're in.
    http://www.apple.com/support/appleid/
    is also info about apple ID's.
    You can make apple ID's without a credit card, you just have to jump through a couple of hoops to do it since the default is that people will always give a credit card. The key to making an ID without a credit card is that you try to download a free app first, then follow the 'make an ID' prompt. That will get you the 'none' option for payment.

  • Can I use one itunes account for multiple users and multiple devices

    Can I use one itunes account for multiple users and multiple devices?

    The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

  • For multiple users on a computer, will Firefox Sync synchronize all the users on a computer or only the one logged on?

    For multiple users on a computer, will Firefox Sync synchronize all the users on a computer or only the one logged on? For instance my spouse and I will share a laptop and I want to sync my Firefox when I log on there also but do not want to sync her data.

    Curt
    how do you know if your using the
    Central cache all distributed cache ?
    and are they both stored in the same place ?

  • How to make Adobe acrobat feature to convert SAP  Pages to PDF available for multiple users connected to the same Citrix server

    Hi,
    In my previous endeavours to solve this business requirement where multiple users will be able to use the Adobe acrobat feature to convert SAP pages inside SAP to PDF, I was told that it is not possible to do this for multiple users at the same time. However I have found an article according to which it says it is possible. Could you check it once and let me know if this article can be used for implementing the requirement stated above as this link clearly indicates that Adobe Acrobat is supported on Citrix.
    Please find the link below where it states it is adobe acrobat is supported in Citrix for multiple users.
    http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/citrix.html.

    1. What is the Acrobat feature that you mean? There's nothing specific to SAP included with Acrobat.
    2. Yes, some Terminal Server configurations appear supported (check carefully). All users of the terminal server will need a license, so far as I know - total licenses = total individual people using.

  • Triggering a sub work flow for multiple users at same time.

    I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
    This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
    How can this be achieved?

    Tyr to do like this,
    1. First include the subworkflow in the main workflow template.
    2. Now include standard Block Step in the main workflow template.
    3. In the block select the block type as ParForEach.
    4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
    5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing  assign the multiline container element name in the   for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
    &COSTCENTER[&_WF_PARFOREACH_INDEX&]&   -------->     &_COSTCENTER_LINE&
    Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated.

Maybe you are looking for