Updating Apps Java version from 1.6 to 1.7_25

Hello friends,
I want to access EBS using Java 1.7 on client PC for which I've to update my java version at Apps tier. Right now my Forms & Reports Server patchset version is 10.1.2.3.0.
The document recommends to apply latest patches on 10.1.2.3.0 Home. Can I update java version to 1.7 without applying any patchset update?
Configuration: EBS 12.1.1 on OEL 5.5 (64-bit).
Regards
Aneel Ahmed

qazianeel wrote:
Hello friends,
I want to access EBS using Java 1.7 on client PC for which I've to update my java version at Apps tier. Right now my Forms & Reports Server patchset version is 10.1.2.3.0.
The document recommends to apply latest patches on 10.1.2.3.0 Home. Can I update java version to 1.7 without applying any patchset update?
Configuration: EBS 12.1.1 on OEL 5.5 (64-bit).
Regards
Aneel Ahmed
You need to be on 10.1.2.3.0 or higher, so if you are on 10.1.2.3.0 you should be OK and you can skip this patchset. However, it's always recommended you have the latest patchset applied.
Thanks,
Hussein

Similar Messages

Identify Java version from CLASS file

Hi,
I have a .class file. I would like to identify the Java version from that.
Is there a way to find out?
Also, is there a way to find out the Java version from JAR file?
Thanks.

Kavipriya wrote:
I have a .class file. I would like to identify the Java version from that.
Is there a way to find out?Sure, there's the major version number (48, 49, 50) included in the class files. Look for the class file specification, shouldn't be too hard to find.

HT4623 I have an iPad2 w/ wi-fi, 16gb. I would like to update my software version from 4.3.5 to a later version; however, when I go to settings, general, the "software update" option does not appear???

I have an iPad 2 w/wi-fi, 16 GB. I would like to update my software version from 4.3 to a later versionn; however, when I go into Settings, General, the "Software Update" option is not there???

Judi126 wrote:
... "Software Update" option is not there???
That is only a feature of iOS 5 or later...
You have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

How can I update my ipod version from 1.3 to 2.0 or higher

How do I update my Ipod version from 1.3 to 2.0 or higher?

Except for iPod touch (which runs iOS), each iPod model has different software. The version number doesn't really matter between different iPod models. The latest version of software for each iPod model is installed by iTunes.
Connect your iPod. In iTunes, select the iPod in the sidebar, under DEVICES. Over to the right, go to the Summary tab. You should see a button there that says Check for Update. Click it. If there is an update available for your iPod model, it will be installed. If not, you already have the latest version of software for your iPod model.

I get pop ups about updating my Java version but my system says I do have the right version. Which version is the right one?

I get pop ups about updating my Java version but my system says I do have the right version. Which version of Java is the right one?

Most likely, you have a web plugin that depends on the Java runtime distributed by Apple, such as the Facebook video calling plugin or the "NexDef" plugin for watching baseball streams. If you no longer need the plugin, remove it. Otherwise, install Java.

How do I downgrade to a specific update of Java version 6?

I am used MBA Mountain Lion OSX.
I am trying to use Business Objects through the web and unfortunately Java 7 is not compatible. I was able to downgrade to Java 6u65 (Java 1.6.0_65) but I really need update 45 to get Business Objects to work. Can anyone help me with the terminal code and/or a download that will allow me to pull out Java version 6u45? (Java 1.6.0_45)?
I've been on here trying several other's codes and it says permission denied or "unable to find any JVM versions matching 1.6.0_45"
Could that mean I don't have version 6u45 available to me period?

Just wanted to post the answer in case others have the same issue. I had to remove ALL java related files in order to install an earlier version and there was ONE transient file that I couldn't find and this code worked
http://apple.stackexchange.com/questions/38384/how-do-i-downgrade-java-on-osx-10 -6-8
sudo rm -R /Applications/Utilities/Java\ Preferences.app/
sudo rm -R /System/Library/Frameworks/JavaVM.framework/
sudo rm -R /System/Library/Java/
sudo rm -R /System/Library/CoreServices/Jar\ Launcher.app
sudo rm -R /System/Library/CoreServices/Java\ Web\ Start.app/
sudo rm -R /System/Library/CoreServices/JavaVersion.plist
sudo rm -R /System/Library/PrivateFrameworks/JavaApplicationLauncher.framework/
sudo rm -R /System/Library/Frameworks/JavaEmbedding.framework/
sudo rm -R /System/Library/CFMSupport/StubLibraries/JavaEmbeddingLib/

Java version from class file

How to decide from class file that which java version (1.3, 1.4 etc) was used to compile it?

Sorry I made a mistake,
its minor, major
Dont we have some utility given by Sun for this?
javap -verbose <classname>will print out versions plus more...
Do I need to use InputStream for reading class file then see the version?
DataInputStream din = new DataInputStream(new FileInputStream(classFile));
din.readInt();
short minor = din.readShort();
short major = din.readShort();Why do you need to do this?

Issue updating the viewer version from V20 to V23

Hello!
Our team is having an issue figuring out how to update our viewer version of our multi-issue iPad magazine. All of our issues so far have been on the Viewer Version 20, and are now wanting to use Viewer Version 23... except we can't figure out how to do it! We have the latest version of Folio Builder in InDesign CS5.5... so that can't be it? When going to create a new folio in the panel, our options are only 20, and 21... why isn't it showing 22 or 23? Is this a simple problem to fix? Have been searching the discussion boards to find an answer, but can't seem to find one.
Thanks for your help!

Thanks for your replies guys, I had tried both your recommendations earlier but unfortunately it's not letting me select anything later than V21... so does this mean it would be an App Builder problem?

Since upgrading my ipad2 to ios6 I can't update apps or download from iTunes

How come since upgrading my ipad2 To that ios I cannot update my apps or download from iTunes?

I'm sorry if not because I had the same problem on iPad 3
But now I enter the music or video app and download from iTunes

Update phone SW version from mac os x

Hi,
Is there a way to update the phone sw version from a mac? All I was able to find on the nokia site was the update application for windows...
Thanks,
Alex

You can try this
If your mobile data rates allow, try doing an over the air update. Support varies by phone, variant and software
Go to tools >Utilities> Device manager (location may vary by device)
There should be an updates tab
This functionality may not be available in your device. Contact your service provider for more information
To view or update the current software version of your device or to check the date of a possible previous update, select Menu> Tools> Utilities> Device mngr
To check whether software updates are available select Options> Check for Updates
First off BACK UP YOUR DEVICE! make sure you have a back up of the memory card and also the device memory and make sure that the battery of your device has enough power or connect the chager before starting update. To start the update select access point. The device starts to download the device data.
When the data is downloaded the update description is displayed. Select Accept to accept the download of the update package or cancel to cancel the download. IT may take several minutes and you can use your device during the download but not during installation time.
Server Profile Settings
Menu> tools> utilities> Device Manager
to add a new server profile seleat Options> New server profile.
Contact your service provider for correct settings
Server name- Enter a name for the configuration server
Server Id- Enter the unique ID to identify the configuaration server
Server Password- Enter a password to identify your device to server
Access point- Select the access point to connect to the server
Host Address- Enter the url address of server
Port-Enter the port number of the server
User name & password- Enter your username and password for the server
Allow configuration- To allow receiving configuration settings from this server select yes
Auto Accept all requests-To have your device ask for your confirmation before accepting configuration from this server. Select NO
Network Authentication- Select if network authentication is used. Enter your Network username and Network password to identify your device to the server.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Access two EAS with different Essbase versions and different java versions from the same p.c.

Hi,
I need to regularly access Essbase 11.1.2.2. and Essbase 11.1.2.3 EAS from the same client machine.
They are on, and must be on, different versions of java, is there a way to have both versions of java installed but each using the correct version and without the two java versions causing any kind of problems?
thanks,
Robert.

Hi Robert... I assume this is web-launched?
I spent a day or so trying understand the intricacies of the JNLP protocol and create shortcuts that will invoke web-launched EAS with the appropriate version of Java. I can get one version of EAS to use the 1.6 Java Web Launcher, and the other version of EAS to use the 1.7 Java Web Launcher - but both Web Launchers eventually invoke the same version of Java! There are switches in the JNLP syntax that seem like they should allow you choose the actual Java version that gets invoked, but I just could not make it work.
You can use the Java Control Panel (in Control Panel) to enable and disable the relevant versions before launching EAS.
If you find otherwise I would love to know (or if you find out how to control which versions are enabled or disabled via command-line script).

Get Java Version from Applet to JSP

Hi Forum!
I am trying to collect client information with a jsp page and put the information into a html form.
Besides the request information and some javascript screensize and flash version information I'd like to get the client's Java Version and Vendor with System.getProperty("java.version").
I assume I can get this info only with an applet.
How do I pass the Applet's version result to the JSP so I can view it with HTML and insert it into the form?
Thanks a lot,
Tom

You would use liveconnect and the JSObject class to connect the Java code in the applet to JavaScript in the browser to populate the HTML:
http://www.gsu.unibel.by/pub/javascript/ch19_06.htm
http://www.apl.jhu.edu/~hall/java/JavaScript-from-Java.html

Change java version from 6 to 5

Is there quick way to change from 6 to 5 and back?
The only way I've known from this forum - is with help of Add/Remove Programs
Thank you!
Edited by: stopper on Feb 22, 2008 11:20 AM

Well, this technique has always worked for me. Right now I have JDK 1.6.0_04 installed on the D: drive, and JRE 1.6.0_03 installed in the usual way, including the copies of those .exe files in the System32 directory. With my PATH set up as shown above, here's how the commands work: C:\>java -version
java version "1.6.0_04"
Java(TM) SE Runtime Environment (build 1.6.0_04-b12)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode, sharing)
C:\>C:\Windows\System32\java -version
java version "1.6.0_03"
Java(TM) SE Runtime Environment (build 1.6.0_03-b05)
Java HotSpot(TM) Client VM (build 1.6.0_03-b05, mixed mode, sharing) I also have JDK 1.5 and 1.7 installed; when I want to test something under one of those, I use the fully qualified command: C:\>D:\Java\jdk1.7.0\bin\java -version
java version "1.7.0-ea"
Java(TM) SE Runtime Environment (build 1.7.0-ea-b19)
Java HotSpot(TM) Client VM (build 1.7.0-ea-b19, mixed mode, sharing)

Changing java version from 4 to 5 using command prompt

My default java version is 1.4 . I want to change to jdk 5 for a particular command prompt session alone. i used the following commands
java - versionjava version "1.4.2_07"
set path = C:\java\jdk150_06\bin;%path%.C:\bea92\jdk150_04\bin;C:\WINNT\system32;C:\WINNT;
java - versionjava version "1.4.2_07"
The version still points to 1.4. What is the method to change it from 1.4 to 1.5 ?
Thanks..

Rohiini wrote:
My default java version is 1.4 . I want to change to jdk 5 for a particular command prompt session alone. i used the following commands
java - versionjava version "1.4.2_07"No, that will say
Unrecognized option: -try
java -version
set path = C:\java\jdk150_06\bin;%path%That will not set anything, try
set path=C:\java\jdk150_06\bin;%path%or just
path=C:\java\jdk150_06\bin;%path%

I can't update apps after switching from my dad's Apple ID to mine.

After I switched my dads ID to mine when I go to update apps it requests his password. What do I do to. change it to mine?

Gameboy012 wrote:
After I switched my dads ID to mine when I go to update apps it requests his password. What do I do to. change it to mine?
Enter his password.
Or repurchase the apps with your AppleID.

Updating Apps Java version from 1.6 to 1.7_25

Similar Messages

Maybe you are looking for