Updating apps on Torch 9800 via desktop software v 6

Hey, is it possible to update downloaded apps on my BB Torch 9800 using the desktop software v6.0.1?
I've looked all over, but can only update the installed apps via appworld on the device itself which has caused problems in the past..
Any help would be greatly appreciated...
Cheers

Yes, it is. When you go to purchase or download an app in AppWorld via the AppWorld PC catalog, you will be given an options to install via a connection from your, and your PC will download and install a plugin to enable that.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Software update for BB Torch 9800

Through Twitter BlackBerry Help,I have been informed reliably informed that there is a software update for BB Torch 9800. But checking with phone updating system could not find it. Would someone out there verify and supply me with a link to the update?
Solved!
Go to Solution.

HungryMind wrote:
Hello MilltiotNgoma,
You can check your carriers website if there's an available update for your device.I believe your device can still go up to 7.1
JSanders is right, you can't update the Torch 9800 to OS 7.1 (not even OS 7)
the latest OS for this device was 6.0.0.756 released by Vodafone and O2 UK. Check your Carrier's OS update here: http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Unable to update to OS 6.0 Bundle 2647 either wirelessly or via Desktop Software for Mac

I have a BB Torch 9800 and I've tried all I know to update the system software on my BB wirelessly but it gives me the message "Update cannot continue, Update using BB Desktop Manager on your computer". So I plugged my BB in but it doesn't give me a prompt or anything to update and I'm not sure what's wron. Help please!

Hello azureJTR,
I'm not sure if you have solved your issue yet or not...
To update your BlackBerry's operating system on a Mac is a simple procedure but you can only upgrade to the level that your wireless carrier has released to. I see you're using Bell and they are usually quick to update their offerings.
Follow this guide item:
http://docs.blackberry.com/en/smartphone_users/deliverables/32688/Update_device_applications_2.0_Mac...
New available versions of the BlackBerry's OS are shown when you click the "Show Other Versions" button. (Your BlackBerry needs to be connected for the Desktop software to know both what applications you have installed and the Operating System).
If a newer version than the one you currently have loaded is available in that menu, then do a backup then highlight the item then follow the onscreen commands.
Tom

Software Update App won't connect via Airport

In my main admin account, the Software Update App will not connect to the network over Airport. It will connect using a wired connection and will connect from a different account. It seems that something in this admin account is broken, but I cannot find a solution. I have upgraded to OS X 10.5.1(Archive and Install) and have installed all the latest updates via the wired connection. Everything else including Safari, Mail, and iChat seem to work fine. I cannot find any solution in the discussions for this particular problem. Any help would be greatly appreciated.

I ran Disk Utility and repaired permissions with the following results:
1/24/08 6:23:15 PM Disk Utility[362] Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
1/24/08 6:23:15 PM Disk Utility[362] Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
1/24/08 6:23:15 PM Disk Utility[362] Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
1/24/08 6:23:16 PM Disk Utility[362] Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
1/24/08 6:23:17 PM Disk Utility[362] Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
1/24/08 6:23:17 PM Disk Utility[362] Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
1/24/08 6:23:17 PM Disk Utility[362] Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
1/24/08 6:23:18 PM Disk Utility[362] Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
1/24/08 6:23:19 PM Disk Utility[362] Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
1/24/08 6:23:58 PM Disk Utility[362]
1/24/08 6:23:58 PM Disk Utility[362] Permissions repair complete
Now Software Update seems to work. Are these warnings serious?

BB 9790 firmware download problem via Desktop software

Hi , i am using desktop software to download firmware 7.1 for BB 9790 and i always have a problem of the firmware download bombing out at around 95 percent of the total download, and the error says my i must check my internet but there is nothing wrong with my internet.
i have loaded the latest Desktop software but still get the same error, Help!!

Hi and Welcome to the Community!
You can bypass the Desktop Software automated download by, outside of the Desktop Software, first downloading, from the official download portal, the OS package you desire:
http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html
Then, install that package to your PC. (If the package is from other than your carrier, you will need to delete the VENDOR.XML files.) Now run the Desktop Software and it should offer you this specific BB OS update.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Application Loader Via Desktop Software

Hi All
Ive just got my 1st Blackberry (8120), after using Nokia's for many years, and so far so good
I downloaded the latest version of the desktop software, and im trying to upload things by the application loader such as themes.
however i have already got the theme, and the Opera mini browser but the appliction wants to remove what ive already installed on my phone even if i take out the tick box on the applications it wants to remove and I have deslected "erase all currently installed applications" in the options menu.
Why does the application installer insist on removing any prev installed files, does anyone know a way around this - many thanks
Ste

Try this to put the software on device..
Open DTM - then application loader. on the first screen, connect the blackberry WITH THE BATTERY OUT.
Leave it for up to 3 mins till you see the pin number flash under connections.
Then press next and then replacement the battery.
The follow the steps found Here.
This of course will only work if you actually have the Device software installed to the computer as well.
To check if you do, open up desktop Manager - Help - About Desktop Manager - Click Device Software Tab.
In here you should see the software installed to the pc listed.
If not, go to http://na.blackberry.com/eng/support/do ... _sites.jsp to download the software specific for your carrier/device.
Failing all this, your carrier should have escalated the call to RIM to do a javaload over the phone with you before they authorised a replacement device. Oh well not to worry.
RIM do a javaload when the application loader won't recognise the device, with or without the battery in it.
Also make sure there is no other power going to usb devices and if a laptop, have it plugged into ac power.
Good luck and let us know how you go!
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

How to download and install application via desktop software?

Hello everybody.
I'd like to know how to download and then, install applications on my Bold 9700 using desktop manager (version 6.1).
Can someone enlighten me about it please?

The easiest way to install apps is to use either App World on your phone (available from mobile.blackberry.com if not installed on your phone) or via the web front end of App World (http://appworld.blackberry.com/webstore/) , plugging your phone in via USB.

Please help me: Failed 8310 OS update to OS 4.5 via Desktop Manager

Hello BB Community,
As of this morning, I can't use my Blackberry curve 8310......for anything.
My problems started just as I was about to do a routine USB cable sync between my BB and Outlook.
I was informed by Desktop Manager v 4.7 that OS 4.5 is available.
I delayed the sync, and start the update process.
Everything............. except my BB restart and data reload.......... completed flawlessly.
Then a message says the update has failed, & the entire thing halts.
So, I wait a while then pull the USB cable & turn off the BB.
Turn on......the result was hourglass & white screen.
Removed & replaced battery....result was hourglass & white screen.
Restarted PC and connected BB...........result was hourglass & white screen & Desktop Manager does not recognise BB Connection, but Windows XP sees BB media minus folders.
Reinstalled Desktop manager....... still not recognising BB USB connection on the main screen.
Even though I have all the information saved in Outlook, I am getting desperate.
QUESTIONS:
Is there anything I can do to get my BB curve 8310 operational again?
Should I consider reloading an OS?
My phone is unlocked, so not sure if trying to download and reinstall an OS will LOCK the phone.
The unit's previous startup screen used to show a T-Mobile image.
Should I download the UK T-Mobile OS upgrade?
Blessed Regards,
2121311berry

Good luck, this will work... I have done it many times.
Be patient with JLCmder. If it does not work at first, keep trying, I have seen it take 20-25 tries before it "connected".
Try it with and without the battery inserted if you must.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unable to update apps in-phone or via iTunes after updating iOS

Hello!
I'm using an iPhone 4S, jailbroken with redsn0w, with an Orange SIM card in France. I've tried using three country settings for my Apple ID (same email address, linked to my bank accounts in the US, UK, and France). The phone was working perfectly on iOS 5.1, but after updating to iOS 6, I haven't been able to update the apps on the iPhone. The apps are up-to-date on iTunes on my computer, but I can't get them to sync to the phone (despite there being no obvious problem [e.g. error message] on the computer end). When I tap the 'Update' or 'Update All' buttons in the iPhone app store, the buttons turn a darker shade of grey, and then nothing happens. Everything else is working fine.
I've tried the standard 'hold down the power and home buttons' and some of the other suggestions on here, such as changing the time to a year in the future. Any other ideas would be gratefully welcomed!

hi, Brett - I'm having a problem now restarting my iPhone.
iTunes (yep, it's the latest Windows version) keeps crashing ("iTunes has stopped working" message).
The installed apps are blacked out with text beneath the icon "Waiting".
And iTunes crashes on step 4 of 4 (Syncing Apps to John Alton iPhone 5S - step 5 of 5). Starts on the first app it tries to reinstall / sync.
I am manually installing each application because I'm unable to bring back from syn. (On the iPhone, in App Store, go to Purchased > Not on this iPhone,
But I'm still unable to run iTunes because it crashes while attempting to re-load the applications and data.
Little help?
thanks,
John

For three days I have been trying to update app's on iPad2 via app store...

I keep getting a message saying cannot connect to app store. I have four updates to download but can't.
I have done a full restore in my iPad 2 with no change. I checked password, it is good. I have down everything, any one have any idea how to fix this?
Wifi is working great, as I can access other online apps, check mail and run safari.... I have no idea!

Okay, I have no idea what fixed this issue. But I'll recap so maybe I can help someone else.
1. I checked passwords, usernames & apple ID..... verified account info and billing. All good.
2.   Retorted iPad2. What a pain.
3.   Again checked usernames and passwords and apple ID.   Verified billing info, still good.
4. Reset wifi and cable routers. Oops forgot to tell teenage son.... Oh well he'll get over it.
5.   Restored one more time ( the iPad) and reset wifi and cable routers.   Updates from app store downloaded and son is back to playing online games.
Now it is working..... Third time a charm. Should of done these step three times in a row on the first day of the problem.... :)

Synching between Outlook and my Storm via Desktop Software

So, I have a bunch of contacts on my Storm and a few in my Outlook. I have the synching set up so that it is a two-way sync between the two. However, when I run the sync, all of the contacts on my Storm are downloaded onto my computer/Outlook and the ones in my Outlook are now deleted and didn't get transferred to my Storm
What's the deal?! I thought it was a two-way sync? Any ideas as to why this is happening or how I can control this?
Thanks!
Mike

Welcome to the Apple Community diannebc.
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Desktop Software Can't See My Torch

I can connect to my laptop from my Torch 9800 via Bluetooth. I can connect my Torch to the Blackberry Desktop software via a cable. However, I cannot get my Blackberry Desktop Software (Version 6.1) to see my Torch via Bluetooth therefore cannot connect via Bluetooth. Running Windows 7 64 bit. My Torch is connected to our business server via Blackberry Enterprise Server (not sure if this is relevant). Very frustrating, can someone please help?

As far as I know the country information affects only on language of license text that is shown on installation dialog.
To use this software you can install it even if another country is selected. For example: United States.

How to update BB torch 9800

I'm using version 6.0 bundle 2647 is there any upgrde for this . Can I upgrade to 7.0?

Hi princecaspian82
Welcome to BlackBerry Support Forums
Sorry you can't update your BlackBerry® Torch 9800 to OS 7 , OS 6 is the limit for your device , However you can try your Carrier site to know if they have released any newer bundle for your device Carriers .
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Software Updates app not showing new updates

Hi,
The Software Updates app is not showing new updates. I always get "No Updates Available". For instance, I run 10.8.3 but 10.8.4 is not showing up. I run iTunes 10.0.2 and when I open it I get messages asking me to update to newer versions but they are never showing up in the Software Updates app. I played with the Software Updates app preference files but it did not change anything. Any idea on why the Software Updates app is not working properly.
Thanks

Read this whole message before doing anything.
Back up all data. Quit the App Store application if it’s running. Test after each of the following steps until the problem is resolved.
Step 1
Triple-click the line below to select it:
/Library/Updates
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a folder selected. Move the contents of the selected folder to the Trash. You may be prompted for your administrator password.
Step 2
Do as in Step 1 with this line:
/Library/Preferences/com.apple.SoftwareUpdate.plist
If there's no change, quit the App Store and restore the file you moved from your backup, overwriting the one that may have been created in its place. Otherwise, recreate your settings in the Software Update preference pane.
Step 3
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following items from the Library folder to the Trash (some may not exist):
Caches/com.apple.SoftwareUpdate
Preferences/com.apple.SoftwareUpdate.plist
Preferences/ByHost/com.apple.SoftwareUpdate.*.plist
Saved Application State/com.apple.SoftwareUpdate.savedState
Here, "*" stand for a long string of letters, numbers, and dashes.
Step 4
If you still have problems, quit the App Store again.
Triple-click anywhere in the line below to select it:
open $TMPDIR../C
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). A folder should open. Inside that folder, there may be a subfolder with the name "com.apple.SoftwareUpdate". If so, delete it. You can then quit Terminal.

Applications/Installation won't show up in Desktop Software

Hello, I'm using a Torch 9860 FW 7.0.0.585 which is connected via Desktop Software 6.1 with a Windows PC (Outlook 2003/XP Prof SP3). This morning I encountered a weird problem. Connecting my BB with my PC I decided to check the installed applications since I updated the FM yesterday evening (via my device software updater).
Great surprise ! Exept some Apps (WhatsApp, a Barcode scanner, GPS Logger) no other apps or FW installations were shown. The day before the whole FW installations an all 3rd paty apps where shown in an neat, long list - now: nothing exept these few apps. I tried to reinstall the Desktop Software und reconnected my device - but to no avail.
Did somebody encounter a similar problem ?
I'm a little bit anxious about changing say the installed language packages or other FW preferences since I know no other way then to use the application button in the desktop software to do this. In the current state this would be impossible.
I would be very grateful for some hints or tips.
M.
Solved!
Go to Solution.

If you performed the suggested firmware upgrade, then it won't now be showing in the Applications screen of the Desktop Software. Nothing strange there.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Updating apps on Torch 9800 via desktop software v 6

Similar Messages

Maybe you are looking for