Updating catalyst control center to 11.12 with Radeon 6750m

I am trying to update the CC from version 11.8 to the latest: 11.12. When I download the update from AMD's website, I get the following error:
When I first installed the video drivers, using the ones provided with the boot camp software, I was getting really horrid performance, and fixed it by installing another piece of software (which I can't remember where I got it from or what it was called) which allowed me to turn on powerplay and that fixed the performance problem. The reason for wanting to update is so that I can keep up to date, and also for SWTOR, which loads with a black screen with the catalyst 11.8 driver, but not with the 11.4 (I believe... might be the 11.6).

Hello,
Here is an article about downgrading a Windows 8 computer.  I hope it helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • HP Pavilion dv6-6130eo​, Radeon HD 6770M, switchable graphics, update Catalyst Control Center

    Computer: HP Pavilion dv6-6130eo
    I have installed windows 7 64 bit
    Graphics cards: Switchable Intel and Radeon HD 6770M
    So far, I have been using the graphics driver provided by HP including Catalyst Control Center, and it has been working fine.
    I recently bought a new game: Wolfenstein:New order. I fulfill minimum requirements.
    When trying to run the game, I am informed, that my Catalyst Control Center must be 14.4 or newer: Fatal error, and game cannot run.
    How can I update my Catalyst Control Center to 14.4 or newer? Both graphics cards (switchable) should be working.
    Thanks a lot in advance - This issue is really getting on my nerves!

    Hi @Guggermand 
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that your notebooks works fine except when you try to play your new Wolfenstein New Order game, at which time it informs you that your Catalyst Control Center is out of date and must be 14.4 or higher.  You stated  installed Windows 7 64 bit.
    Have you done all your Windows updates?
    Have you ran The HP Support Assistant to aid with updating drivers and resolving issues.
    Here is a link to the latest recommended  HP driver AMD High-Definition Graphics Driver sp55092.exe for you system.
    If that does not update your current version of the Catalyst Control Center, you will need to check the AMD website.
    Downloading or Updating Software and Drivers for HP Computers
    Here is a link to  AMD Graphics Drivers and Software for your convenience.
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • ATI Catalyst Control Center is not loading with the latest drivers. Help!!!

    I have installed latest ATI drivers from Lenovo 8.712. After that ATI Catalyst Control Center is not loading. The icon is present, when I click display properties. But when I click it, nothing happens. How can I downgrade to the previous version?
    And another question: I have a docking station and 2 monitors. One of the monitors with DVI connection is working fine. Is there any way to disable laptop screen and enable second monitor through analog D-SUB.
    Thank you in advance.

    Let me add. Already tried everything: battery is switched to High Performance, Windows XP service pack 3, T500

  • Envy h8-1409 Desktop-Problem Installing Catalyst Control Center on Wiindows 7 for Radeon HD 7570

    Hi,
    I just purchased an HP Envy h8-1409 desktop.  It came with Windows 8 but I downgraded to Windows 7 due to my unfamiliarity with the new Windows 8.
    Officially, HP only provides Windows 8 drivers for this particular model I bought.  However, I was able to find another HP desktop model (h8-1360t) that has almost the same hardware that has Windows 7 drivers.  I downloaded all the Windows 7 drivers and was able to install properly for everything except for the Graphics Card (Radeon HD 7570).  There was an error message during the start of the installation complaining that the driver was unable to find supported hardware on my machine.  I ended up using "Windows Update" to get the driver for the Radeon HD 7570.
    Having installed the Radeon HD 7570 driver only allows Windows to recognize my graphics card but I was unable to adjust any advanced settings.  So I went to AMD's website to get the latest Catalyst Control Center package.  During the installation, no error was found and everything seemed alright.  However after the installation is complete, I was unable to see Catalyst Control Center anywhere on my computer (e.g. Start menu, right-click menu, etc).  Also, when I checked the "ATI Technologies" folder, it was empty!
    I also tried using AMD's auto detect agent but my graphics card was not even recognized.
    I am running out of ideas on how I can get Catalyst Control Center installed.  Please help!

    Hello,
    Here is an article about downgrading a Windows 8 computer.  I hope it helps.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • How to adjust HDMI overscan without catalyst control center? 2011

    I have an unsolvable problem due to the lack of standard between Apple and AMD.
    The problem is that i have a black frame arround my TV screen when i connect my MacBook Pro 2011 (15" 2.2Ghz) to my TV.
    This is called overscan. 
    Now here is why i can't solve this (and why it is so frustrating):
    -AMD cards send underscanned signal through an HDMI output by default.
    -Having no native control for overscanning on Windows 7, the only way to adjust this is through AMD/ATI Catalyst Control Center software.
    -The AMD Catalyst Control Center software is incompatible with the MacBook Pro 2011 and won't install.
    Now is there a workarround for this?
    If not, who is responsible (who should i turn to)?
    Is it Apple for using a non-standard driver for the AMD graphic card?
    Or is it AMD for not providing me with a compatible version of Catalyst Control Center?
    PS: Of course Microsoft is responsible for not providing native overscan control in Windows 7  

    Hi C,
    See if the TV has overscan settings or zoom.
    http://hd.engadget.com/2010/05/27/hd-101-overscan-and-why-all-tvs-do-it/
    In a perfect world broadcasters would mind their signal and ensure every pixel was worth watching, then TV manufacturers wouldn't feel the need for overscan -- or at least we hope. In the meantime we're just happy that most TVs have a way to turn it off. When an image is displayed properly, it's sometimes referred as 1:1 pixel mapping. This simply means that every pixel in the signal is displayed by a single pixel on the display. Of course each manufacture has its own name for this mode; like Samsung who sometimes calls it Screen Fit, and Pioneer called it Dot by Dot. No matter what it's called, it's rarely on by default -- even when watching 1080p24 from Blu-ray which never has garbage on the edges! -- so you'll have to find the button on the remote called something like format or P.size, depending on the brand. Your best bet is to read the manual -- shocker.

  • Catalyst Control Center crashes with new video driver update

    Hi Folks,
    I just updated to the newest rev of the ATI driver (April 28, 2009).  Now, catalyst control center crashes at startup, opening a dialog box that says, "catalyst control center monitoring program has encountered a problem and needs to close".
    Has anyone else run into this?  Any ideas on how to fix it?
    Thanks,
    Allie
    T400 2764-CTO, XP

    Please post the details of your problem with the 8.563 driver in this thread.
    Use the format from  this post.
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

  • Catalyst Control Center stopped working properly after widows update

    When I let Windows Update install the newest catalyst control center driver I could not open catalyst control center so I tried to do a system restore but it failed because It said my anti virus was preventing this with the error code 0x80070005.I first tried to disable the anti virus shields and restore didnt work. Then I uninstalled the anti virus and went to safe mode but it gave my the same error. Now Catalyst Control Center opens but the only feature available is HydraVision. I still cannot change the picture and graphics settings because they are not there to select in CCC. 

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your Catalyst Control Center (CCC) program on your desktop computer has stopped working correctly after downloading Windows update drivers for it, and I would be happy to assist you in this matter! To correct this issue, I recommend returning your system back to a previous restore point to before the Windows updates were installed. This can be done by following this resource on Using Microsoft System Restore (Windows 7).  Once the restore point has been enabled, you can update your CCC and graphics drivers by following this document on Using HP Support Assistant (Windows 7).  Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards

  • Windows 8.1-AMD Catalyst Control Center

    Hello!
    First of all I would like to start of by saying thank you Hp for an amazing product, I bought my Hp Envy m6 laptop in May and I have loved it ever since. I bought it as a gaming machine, and it did not disappoint me...until I decided to update to Windows 8.1.
    I downloaded it from the app store last week to see what new features they added (was rather disappointed with how long it took especially for the lack of great features they added, however that is not your fault), after a day when I bought a new game from Steam (Arma Two) and I went to the Catalyst control center to set the performace to high I realized it had stopped working the message I got was:
    "Catalyst Control Center cannot be started.
    There are currently no settings that can be configured using Catalyst Control Center"
    This means a lot go my games are running rather bad at the moment as they are using a mixture of my intergrated Intel 4000 "graphics card" and my AMD Radaen HD 2GB Graphics card. Instead of just my AMD graphics card (the good one).
    I tried looking for solutions to this problem e.g. A new download for Catalyst Control Center or an easy way to downgrade to windows 8 from windows 8.1 however I have been unsuccessful. The only method that seems possibly is to downgrade however that would involve uninstalling all my programs (Over 50 games from steam) and all my other programs. 
    So the reason for this message is that I am looking for a solution to this problem, either an easy way to downgrade to windows 8 OR a way to get my Catalyst Control Center to work again  so I can change what graphics card is used when.
    Thank you
    -Conor
    P.s. I love Hp's products and I have told all my friends to get them. This is window 8's fault not yours.

    Possible solution:
    Hi Guys,
    I just contacted HP support regarding this problem. They asked me to install the following file:
    ccc2_install.exe
    It was already present in my system in the following path:
    "C:\Program Files\AMD\CCC2\Install"
    This solved my problem. CCC is working fine now
    Also, while installing, your desktop might go black and only active windows will seem to work. But, thats fine, just restart your system.
    Hope this helps
    Cheers...
    Thanks and regards,
    Saptarishi

  • Amdcccle (Catalyst Control Center) not saving multiple monitor setting

    I followed the wiki to the letter, but I cannot get any x window session to save the changes I make in amdcccle.  All I am trying to do is get multiple monitors configured, and it works great with the catalyst control center but it never saves these settings.
    I have done the following:
    gksu amdcccle
    gksudo amdcccle
    also:
    sudo aticonfig -f --initial=dual-head --screen-layout=right
    and many other interations of aticonfig.  The -dtop option complains that it doesnt work with RandR enabled.
    I got this working a few weeks ago but can't remember what I did.  If amdcccle could actually save the current configuration to file that would solve the issue but it simply will not.

    Hello insco6750,
    When you updated the drivers did you install over top of existing software or uninstall beforehand?
    First we should try ripping everything ATI off of the system, including software, drivers and CCC. You should be able to uninstall everything through Add/remove programs.
    After you remove everything reboot and let windows reinstall it's own drivers and software. You don't need CCC to do dual monitors so we can do testing without it.
    Once you let windows install see if your HDMI output no longer works when you switch to the TV.
    Post back your results after completing this.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • Screen Rotation from Catalyst Control Center won't stick

    Greetings,
    I recently upgrade all my software on my laptop (T23, model 2668-J3U, docked in a docking station), both installing XP SP3, and installing all the upgrades through the Thinkpad System Update tool.  I have 2 external flat screen displays connected (one on digital one analog) and I use the rotation feature.  However, since upgrading, I've tried using the Catalyst Control Center to rotate my screens but cannot get it to "stick".  The option is there to rotate and i've tried mutliple combinations, but no matter what I do the screen flickers (like it's going to rotate), but then flickers back to the landscape settings. 
    I've checked forums on this site as well as googled on the internet but haven't been able to find anything on the subject. 
    Is there some other trick to get the rotation feature to stick?  You help is much appreciated as I rely on rotated screens for many reasons. 
    Many Thanks,
    Fred

    Hi there!
    I work in Tech support in the UK for a hospital and i have recently come across this issue on our HP5850's.
    They are using the HP drivers built on catalyst 8.4, and also had SP3 installed and the screens would NOT rotate.
    After much faffing around and eventually coming across this site we tried uninstalling SP3 and now the screen rotates fine.
    So, whilst i do not wish to argue with Lancelspencer (last poster), removing SP3 DOES fix the issue.
    Hope this helps, good luck.
    Brendon
    NHS IT Tech support

  • T400, cannot start Catalyst Control Center - error "active GPU not supported"

    on a t400 machine running vista business 64 bit.
    last week all was hunky dory.  this week, when i try to open my ati catalyst control center (CCC), i receive the following error:
    "ATI catalyst control center cannot be started because the currently active gpu is not supported"
    i've read some posts about this problem stemming from not using the ATI graphics card and rather being on the integrated graphics card.  the posts indicated i could reenable CCC simply by clicking on the battery icon in the system tray and selecting "high performance mode" to force the machine to use the discrete graphics card.  after i do this, and then try to start CCC, i receive the same error as above.  also, at this point after the switch to high peformance mode, my device manager lists "mobile intel(r) 4 series express chipset family" as my display adapter still.  if i left or right click on the battery icon in the tray, i do not see any options for switching cards explicitly.
    the video driver for the mobile intel 4 adapter is listed as being from ATI at version 8.520.4.4000.
    i am not sure of my driver version for the ATI card.  nor do i know where to look for it.
    to my knowledge, nothing aside from a number of "critical" windows updates have changed on my system between the time CCC was working last week and now.  
    any suggestions as to how to fix this?  and what caused it to stop working?
    thanks in advance for any help. 
    Solved!
    Go to Solution.

    i finally figured it out.  and no new drivers or reinstalls were necessary.  in the end, all i needed to do was turn on the lenovo version of the power manager (which appears in my taskbar as a horizontal green battery with the number of minutes of use remaining).  from there i can left click and get to the menu that has the switchable graphics option where i can chose energy saving or high performance.  if from there i select high performance, i can then open CCC. 
    the important thing to note from this is in order to get to this menu you have to be using LENOVO's thinkVantage power management program (which sticks the green battery icon on your task bar), NOT windows built in power manager, which appears as a vertical grey/blue/? battery in the system tray (at least on mine).  once you have that on, you can explicitly switch the graphics cards.  
    the odd thing is, i'd been accessing CCC without explicitly switching cards with no problem up to last week.  so somehow the default setting must of gone from high performance to energy saving, thus putting me on the integrated graphics card unless i switched it manually.  weird.
    slip, thanks for you help.  i appreciate it.  and that is an interesting note about freeing up more memory by disabling the switchable graphics.  i will probably give this a shot and see how i like.  more available memory never hurts!
    thanks again to everybody that helped out.

  • ThinkPad S440 Catalyst Control Center Error

    Hi,
    I keep getting a message on my latop:
    Catalyst control center: host application has stopped working.
    This has started happening after I tried to do a BIOS update last week and I ended up with the blue screen of death & had to recover my whole laptop.
    I have no idea what the message means, I was wondering if anyone could help?
    Thanks.
    Solved!
    Go to Solution.

    Hi there, i had the same problem after i installed windows 8.1
    but now it's solved by updating catalyst software.
    You may try to visit www.AMD.com then install autodetect drivers program.
    Hope it helps.
    My catalyst version is:1206.1603.28764

  • CCC.exe Catalyst Control Center goes bezerk

    T60p 14.1" 2613 cto Win XP SP3, ATI Mobility FireGL v5250, driver 8.593.100.700 9/29/2009
    CCC.exe Catalyst Control Center goes bezerk, suckin up the cpu %. If I try to run Catalyst Control Center, I get a pop-up error message
    http://farm4.staticflickr.com/3687/10659959163_ff19273e22.jpg
    I have to kill ccc.exe to use my computer. Any ideas what is going on?

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your Catalyst Control Center (CCC) program on your desktop computer has stopped working correctly after downloading Windows update drivers for it, and I would be happy to assist you in this matter! To correct this issue, I recommend returning your system back to a previous restore point to before the Windows updates were installed. This can be done by following this resource on Using Microsoft System Restore (Windows 7).  Once the restore point has been enabled, you can update your CCC and graphics drivers by following this document on Using HP Support Assistant (Windows 7).  Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards

  • Catalyst Control Center: Host applicaton has stopped working

    I keep getting the error:
    Catalyst Control Center: Host applicaton has stopped working
    A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.
    The only button on this window is "Close program"
    This error started on 01/04/15 (via the event viewer).
    The video driver for my AMD Radeon HD 7520G from AMD is dated 9/15/2014 with a version of 14.301.1001.0.  If I go to the HP support site, the driver is shows is dated 11/11/2013 with a version of 13.152.1.1000.

    Hi @cjssas 
    Welcome to the HP Support Forums!
    I understand that you are getting an application error from your Catalyst Control center. I am happy to assist with this.
    The first thing I would recommend trying is a system restore to a point before the problem began. It is possible that some other software installed or driver, or system update, may be the cause. So take a look at this:
    Using Microsoft System Restore (Windows 8)
    If that does not work, then I would download the driver again, uninstall the existing driver, restart the computer and then install the driver once more and see if the problem recurs.
    Incidentally the support website shows the latest hp customized version of all the drivers for that notebook. Hp customizes them to be compatible with the other hardware in the notebook. It is always possible to use a different driver, but there are no guarantees it will work.
    I hope this helps.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Boot Camp - Windows 7 (64-bit) - Catalyst Control Center

    Hi,
    This topic is all about running Catalyst Control Center on your Mac in Boot Camp.
    Setup:
    Mac Pro 2.66 (early 2009)
    ATI Radeon HD 5870
    Boot Camp 3.2
    Windows 7 (64-bit) SP1
    Case:
    First I uninstalled all graphic drivers that came with Mac OS disc. After that I booted up in safe mode and removed all left-overs with Drive Sweeper. After verifying that everything was gone I booted up in standard mode and installed latest version of Catalyst Software Suite (v.11.2).
    Notice! To get through with the installation of CSS I had to uncheck features like drag and drop decoding. If I did not uncheck those features the installation process would fail...no clue why. After a "successful" installation it still does not work. When I right-click the CCC shortcut or try to start the application from its folder nothing happens.
    *Solution (if any):*
    Any ideas?
    <Edited by Host>

    I had trouble accessing catalyst control center (for my AMD Radeon HD 6700M Series display adapter) on my Windows partition (64-bit).  I tired installing the drivers from the mac os x cd and from AMD's web site.  While I could successfully install the driver, I couldn't get the control center up and running.  The interesting solution to this problem was downloading the AMD Catalyst™ 12.2 Preview Driver.  After installation, i was able to access the catalyst control center and solve a problem that I was having (undersize on my monitor when using HDMI).  I hope that this helps solve the problem to others who are experiencing it (I thought I'd post as this page came up in my solution searching).

Maybe you are looking for

  • Connecting HP PHotosmart 8450 Wirelessly

    I'm a little confused by the directions to connect my printer wirelessly.  I currently have it connected with the USB connection and want to connect it wirelessly through my router.  Do I remove the printer first and start again with the ethernet con

  • AppleTV does not recognize my MobileMe account

    I tried connecting to my MobileMe gallery through AppleTV and it keeps saying my account is not a valid one?????

  • ACF ActiveX error Adobe Interactive Forms

    my enviornment server:  windows 2003 WebAS 6.40 SR1 SP9 ADS 1.00 SR1 SP9 (all configured according to ads installation and configuration guides, installed adobe credentials file and checked password, ADSCallers group, ADSUser security role assigned,

  • After setting printer up, computer can't connect

    I have a network printer (HP Deskjet 6127 with Ethernet) connect to an Airport Extreme. I set up the printer on my Mini (10.6.8) connected wirelessly to the network and it all seemed to work fine. But when I try to print it just hangs and then gives

  • Help creating a custom tag from a scriplet

    I am trying to make a cusom tag to replace this peice of code: <TABLE > <%  out.println("<TABLE >\n" +                 "<TR BGCOLOR=\"#FFDDAA\">\n" +                 "  <TH>ID Number\n" +                 "  <TH>Artist\n" Iterator it = pricePassed.get