Updating Collections specialist on production

Hi all,
Have you implemented before the following notes>
936204 - Transaction for maintaining specialist and substitutes.
936061 - View cluster UDMVC_COLL_GRP is uneditable in production sys.
To allow changes in production directly in transaction UDM_GROUP_SPECIALIST what additional changes would you need to make?
Thanks!

When I enter through UDM_GROUP the system shows the message client has status 'not modifiable'. Nothing is shown at SU53.
Else I was thinking of using UDM_BP_GRP to make the changes in production, what do you think?
Any other way to update the date in production?
Thanks!

Similar Messages

Collection Specialist - Collections Profile Tab of Business Partner.

Hi,
We are using the SAP FSCM Collections Management module. When I assign the collection profile to the Business Partner on the Collections Profile Tab, the Collection Segment, Collection Group are populated based on the configuration but the Collections Specialist does not get populated.
Can someone please throw some light on this if they have experienced this issue?
Thanks & Regards,
Bhairav Naik.

Hello Mark , actually I dont think that is possible to transfer data related to collection profile (displayed in BP master data for a BP with colletion managemnt role) from Cusotmer master data because this kind of information are not availabe as my knowledge in Cusotmer master
Solution could to transfer all other available data from Cusotmer data to BP and once transferred update mannually the collection profile.
I have seen also a program ( transaction UDM_BP_PROF) to update collection profile automatically, but I did not manage to make it work on a exidting BP.
What do you think about this approach?

Airplay has quit working. I've got the latest updates. No apple products will connect to it.

Airplay has quit working. I've got the latest updates. No apple products will connect to it. Any ideas?

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

SCCM Report for Applicable and Installed Updates Collection Wise

Hi All, I was looking for a report on Applicable and Installed Updates Collection Wise and got this below query on the Internet and want to create a SCCM report with this below query. How to make this query working in SCCM report?
Do I need to add prompts, if yes please guide me on adding prompts.
SELECT
DISTINCT
SYS.Name0
AS [Server Name], SIS.SMS_Installed_Sites0 AS [Site Code], UCS.Status AS [Patch Status Code],
CASE WHEN UCS.Status = '2' THEN 'Applicable' WHEN UCS.Status = '3' THEN 'Installed' ELSE '' END AS 'Patch Status', UI.BulletinID AS [Bulletin ID],
UI
.ArticleID AS [Article ID], UI.
Title
FROM
v_R_System AS SYS LEFT OUTER
JOIN
v_Update_ComplianceStatusAll
AS UCS ON SYS.ResourceID = UCS.ResourceID INNER
JOIN
v_UpdateInfo
AS UI ON UCS.CI_ID = UI.CI_ID INNER
JOIN
v_RA_System_SMSInstalledSites
AS SIS ON SYS.ResourceID = SIS.
ResourceID
WHERE
(UCS.Status IN ('2', '3')) AND (UI.ArticleID IN ('972270', '974392', '973904', '969947')) AND (SYS.Name0
IN
(SELECT DISTINCT v_FullCollectionMembership.
Name
FROM v_FullCollectionMembership INNER
JOIN
v_R_System
ON v_R_System.ResourceID = v_FullCollectionMembership.ResourceID AND v_R_System.Active0 = 1 AND
v_FullCollectionMembership
.CollectionID IN ('Collection ID'
ORDER
BY
[Patch Status Code]

Yes it can be done and please run the query which i have shared in the thread
I again pasted the query for you below..
SELECT DISTINCT
SYS.Name0 AS [Server Name], CASE WHEN UCS.Status = '2' THEN 'Applicable' WHEN UCS.Status = '3' THEN 'Installed' ELSE '' END AS 'Patch Status',
UI.BulletinID AS [Bulletin ID], UI.ArticleID AS [Article ID], UI.Title
FROM         v_R_System AS SYS LEFT OUTER JOIN
                      v_Update_ComplianceStatusAll
AS UCS ON SYS.ResourceID = UCS.ResourceID INNER JOIN
                      v_UpdateInfo AS UI ON UCS.CI_ID
= UI.CI_ID
WHERE     (UCS.Status IN ('2', '3')) AND (SYS.Name0 IN (SELECT DISTINCT v_FullCollectionMembership.Name
FROM v_FullCollectionMembership INNER JOIN
     v_R_System ON v_R_System.ResourceID = v_FullCollectionMembership.ResourceID AND v_R_System.Active0 = 1 AND
                                                   v_FullCollectionMembership.CollectionID
IN ('XXX00000')))
Kamala kannan.c| Please remember to click “Mark as Answer” or Vote as Helpful if its helpful for you. |Disclaimer: This posting is provided with no warranties and confers no rights

After the latest update, all my apple products reverted to an old icloud account. As it no longer exists, I cannot get into it to delete it and add the correct id. How can I change this, especially on my Macbook pro?

After the latest update, all my apple products reverted to an old icloud account. As it no longer exists, I cannot get into it to delete it and add the correct id. How can I change this, especially on my Macbook pro? There is no p/w related to it and even though I tried to reset "password" it won't allow as the id does not exist, neither does the email associated with the old id. How do I switch it to a newer id?

It's all rather odd because the old account cannot 'no longer exist' - if you don't have the correct password you won't be able to get into it, but you can't actually delete an iCloud account from the server.
I'm afraid you will need the services of iCloud Support. If you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the inititial period, you can contact them here:
http://www.apple.com/support/icloud/contact/
You will need the serial number of the covered hardware.
If you are not covered by AppleCare, then - in common with other free email services - there is no free support and you may be asked to pay a fee.

I can't download an app or update ,It says ( the product distribution file could not be verified) in App Store ,and in iTunes says An unknown error occurred (-50) ?

Hi:all
I can't download an app or update ,It says ( the product distribution file could not be verified) in App Store
,and in iTunes says An unknown error occurred (-50) ?
Help Please.

See this link from another similar question. It may need patience to resolve. I think Thomas Reed's suggestion is best place to start.
App Store rejects buy of Mountain Lion: Apple Support Communities

Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update.

When my downloading until 80%, appear Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update."

What product and version number are you talking about. Is it a trial version, or is it the full or subscription version. If the latter, activate the product with your S/N or Adobe ID and then do the updates.

Installing cs3 master collection and cs5 production premium on windows 7 machine

I have a windows 7 ultimate machine that I would like to install CS3 Master Collection on. I would then like to upgrade the Production Premium programs to CS5.
I have the install discs for both. Any suggestions for how to go about doing this would be greatly appreciated.
Thanks!

Tahseen,
Thanks for the quick reply!
Both CS3 Master Collection and CS5 Production Premium are full installs, neither is an upgrade. I have serial numbers for both.
Machine previously had CS4 Production Premium installed on it, that has been uninstalled.
Should I install CS3 Master Collection then install CS5 Production Premium? If so, do I need to remove the CS3 versions of programs included in Production Premium before installing CS5 Production Premium?
Thanks again!

Update Serial Numbers to Production Order

Hi,
Has anyone used any Function module for updating the Serial Numbers to the Production Order Header. I am using the FM - SERNR_ADD_TO_PP . The Serial Numbers needs to be assigned when doing Goods Issue in MIGO. At this point The FM is updating the Serial Numbers to Order but it is putting it in Status PMP1.
Once the Status is PMP1 it prevents anymore Serial Number update to the same production order using the same Function module. This is preventing us from doing partial Goods Issue in MIGO.
Is there any more Function Module that can be used to updating the Serial Nos in the Production Order.
Regards,
Arunava

HI rasheed,
Check this resolution on table control for BDC.
https://wiki.sdn.sap.com/wiki/x/DQGqAw
Note: Do not post the same question twice.
Regards,
Bhumika

How to update collection when checkbox changed in report

I have a report based on a collection:
select seq_id
       ,c001
       ,c002
       ,apex_item.checkbox(1,seq_id,decode(c003,'J','CHECKED','UNCHECKED')) selected
from apex_collections
where collection_name='CONCOLLECTION'When the checkbox changes I want to store the new checked/unchecked status in the collection.
Steps towards a solution I've come up with:
1 Create a dynamic action: Change, jquery selector : input[name="f01"]
2 Create javascript to store value (=seq_id) of changed item into a hidden page item.
3 plsql code to update collection member with seq_id that is now in hidden item.
Is this the way to do it?
If so, it's the javascript of step 2 that I can't figure out.
thanks, René

thanks this works.
Using javascript I store the seq_id and the checked value in 2 page items
$s('P70_SEQ_ID', $(this.triggeringElement).val() );
$s('P70_CHECKED', $(this.triggeringElement.checked).val() );The checked value I get is <empty> when checked and 'undefined' when unchecked. Based on this I can now update the collection.
declare
l_selectie varchar2(1);
begin
if v('P70_CHECKED')='undefined'
then
    l_selectie := 'N';
else
    l_selectie := 'J';
end if;
apex_collection.update_member_attribute(p_collection_name => 'CONCOLLECTION'
                                             ,p_seq             => v('P70_SEQ_ID')
                                             ,p_attr_number     => 3
                                             ,p_attr_value      => l_selectie);
end;

Update Statistics of CRM Production system is terminated with errors

Dear All,
Update Statistics of CRM Production System is failing ie terminated with errors.
Kindly help.
Following are the logs:
BR0973W Database operation alert - level: WARNING, operation: cegnnbuz.chk, time: 2011-08-12 09.32.37, condition: Last successful 'chk' op
BR0252E Function fopen() failed for '/oracle/KPC/saptrace/diag/rdbms/kpc/KPC/trace/alert_KPC.log' at location ora_alert_check-1
BR0253E errno 13: Permission denied
BR0280I BRCONNECT time stamp: 2011-12-22 04.07.36
BR0977I Checking database profile...
BR0978W Database profile alert - level: ERROR, parameter: COMPATIBLE, value: 11.2.0 (<> 10.2.0)
BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, value: 11198464 (>< 4096,512 KB)
BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_INDEX_COST_ADJ, value: 20 (set in parameter file)
BR0280I BRCONNECT time stamp: 2011-12-22 04.07.36
BR0980I Number of changed database profile parameters: 0
BR0280I BRCONNECT time stamp: 2011-12-22 04.07.37
BR0955I Number of signaled error/warning/exception alerts for database administration: 0/0/0
BR0956I Number of signaled error/warning/exception alerts for database operations: 0/1/0
BR0957I Number of signaled error/warning/exception alerts for database messages: 0/0/0
BR0958I Number of signaled error/warning/exception alerts for database profile: 1/2/0
BR0806I End of BRCONNECT processing: cehmkvis.chk 2011-12-22 04.07.37
BR0280I BRCONNECT time stamp: 2011-12-22 04.07.37
BR0804I BRCONNECT terminated with errors
Thanks
-Madhura

Hii
I ve checked all conditions as:
1.      -rwxrwxr-x   1 orakpc   dba      3406704 Aug 12 16:54 brtools
2.
SQL> show parameter compatible;
NAME                                 TYPE        VALUE
compatible                           string      11.2.0
3. Brtools version is 7.00 and oracle is 11G
4. drwxrwxrwx   6 orakpc   dba            6 Aug 7 14:19 saptrace
Still we are facing this issue.
pls help.
-Madhura

CA96 update of in-house production time

Dear PP Gurus ,
I want to update material master for in-house production time with Routings lead times.
The system update processing time (lot dependent) but I want to update the in-house production time (MRP2 view).
Can you help me ?
Thanks in advance

I am confused.
Routing is required for production order right. Why do you need this data for reorder point planning?\
Are you producing this material depending on the reorder point planning?
If so whether your production rate is independent of lot size? like you need 100 to or 1000 to, the time taken is same? is it true?
Kinldy let us know your business scenario...looks to be intersting.

What means: Automatically approve updates to the WSUS product itself

Dear all,
on a WSUS server / Update Services / Options exists the "Automatic Approvals" Option.
Once you open it, advanced features will be shown.
One of the advanced feature is called:
"Automatically approve updates to the WSUS product itself"
Does it mean, that only updates for the WSUS server services
will be approved, or
does it mean, that the WSUS Server will also approve
WU Clients updates (f.e. wuauclt on Windows XP clients or higher, ...) ?
Thanks a lot,
Heiko

Hello,
I know this post is old but I need clarification about this specific question.  When we want to approve an update, we can approve it for "all computers" of for specific group of computers.     So I don't understand
how the automatic approval of WSUS updates works.
In the WSUS update window, there was an update that was needed on 1 computer even if there was a check in the "automatic approval of WSUS updates".    And it was not approve.
I had to create a group called "WSUS update needing approval" and assign this computer to that group and then approve the WSUS update to that new group.
I am not sure that I understand it correctly.
Can someone clarify this for me please ?
Thank you very much.

TCODE to update collection strategy on contract account

Hi Experts,
We have some accounts for which collection strategy was not populated at the time of move in. Now we want to update collection strategy manually. Transaction FPCCU does not allow changing collection strategy from blank to new value. I think there is some other tcode as well which allows changing collection strategy and master data group. If anyone is aware of that transaction please let me know.
Thanks in advance!!

Ravi,
Try Transaction code FPCG.
Thanks,
Amlan

Can't get Windows update to download updates for other MS products

Hi,
Installed W7 Home Premium on a single system and for one or another reason I cannot get Windows Update to download updates for other Microsoft products. MS Office University 365, MS Visual Studio Pro 2013 and Microsoft Expression are also installed on this
system.
I click on Find Out More in the Windows Update page and IE 11 opens. It first goes to http://www.update.microsoft.com/microsoftupdate/v6/vistadefault.aspx?ln=en-au and then redirects to http://www.update.microsoft.com/windowsupdate/v6/thanks.aspx?ln=en&&thankspage=5
Here is a picture of the page:
As you can see there is no change settings button as described at http://windows.microsoft.com/en-au/windows/change-windows-update-installation-notification#1TC=windows-7 .There is no way I can change settings so updates for other MS products are also downloaded.
Firefox is my default browser; even if I load the link in Firefox I get the same result.
Thanks,
Imran

Don't use a web browser to do that. Since Vista, WindowsUpdates are no longer performed in a web browser, it's in Control Panel. (that's why the
www.update.microsoft.com web page is telling you to check Start Menu")
The Change Settings button, appears in the Windows Update applet in Control Panel.
Click "Start", and in the search box, type in: Windows Update. Or, look on Start Menu. Or go to Control Panel/System&Security/WindowsUpdate.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Updating Collections specialist on production

Similar Messages

Maybe you are looking for