Updating CS6 causes programs to be non usable in the selection.

This has happend to me twice now. I have had to reinstall the whole CS6 Suite. when I run the updates a program disapears out of the suite. last time it was illustrator and then I reinstalled. This time after the update it was photshop. It doesnt have a .exe in the folder or anything anymore within the program. Anyone know whats up with this?

Hi ,
My problem is solved  ....
i found that  after executing  UCCHECK transaction code  ,in display  you will find one button on rigth side
"set unicode attribute"   .  after selecting no of programs at once we can  press that butoon .
The Unicode flag is set for the selected programs. The programs are
written into interactively selectable transport requests and generated.
You must later release the transport requests.
I hope this will be helpfull to all.
Regards
Deepak.

Similar Messages

  • Whenever I try to update my iPhoto program I get this error message "The product distribution file could not be verified. It may be damaged or was not signed."

    Whenever I try to update my iPhoto program I get this error message "The product distribution file could not be verified. It may be damaged or was not signed."

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • When I try to update my CC-programs to CC 2014 I get the message: Exit Code: 15. Why? I have OSX 10.9.4

    When I try to update my CC-programs to CC 2014 I get the message: Exit Code: 15. Why? I have OSX 10.9.4

    Exit code 15 installing | Mac OS X | CCM, CS6

  • I updated cs6 camera raw and now can't see the camera metadata I used to see and cannot find it in photoshop itself.

    I updated cs6 camera raw and now can't see the camera metadata in raw that I used to and can't see it at all in photoshop.  can this be fixed?

    sgterrill65 wrote:
    I am using windows 7 64 bit not mac
    Next time, please give all pertinent information from the get go.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the

    The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the Meantime?

    Have you tried yesterday's update to iOS8.0.2?
    iOS 8.0.2
    This release contains improvements and bug fixes, including:
      •  Fixes an issue in iOS 8.0.1 that impacted cellular network connectivity and Touch ID on iPhone 6 and iPhone 6 Plus
      •  Fixes a bug so HealthKit apps can now be made available on the App Store
      •  Addresses an issue where 3rd party keyboards could become deselected when a user enters their passcode
      •  Fixes an issue that prevented some apps from accessing photos from the Photo Library
      •  Improves the reliability of the Reachability feature on iPhone 6 and iPhone 6 Plus
      •  Fixes an issue that could cause unexpected cellular data usage when receiving SMS/MMS messages
      •  Better support of Ask To Buy for Family Sharing for In-App Purchases
      •  Fixes an issue where ringtones were sometimes not restored from iCloud backups
      •  Fixes a bug that prevented uploading photos and videos from Safari
    For information on the security content of this update, please visit this website:
      http://support.apple.com/kb/HT1222

  • Cs6: Masking mode doesn't function - can paint the selection correctly - but then clicking the masking tool icon - nor selection ist made. Can I repair that?

    Cs6: Masking mode doesn't function - can paint the selection correctly - but then clicking the masking tool icon - nor selection ist made. Can I repair that?

    Can I repair that?
    Repair what? Your description seems a bit unclear, maybe posting a few screenshots can help clarify the issue.
    Are you talking about Quick Mask Mode?

  • When Place Image in Photoshop, error msg: 'Problem with Photoshop CS6 caused program to stop working

    When I 'Place Image' in Photoshop, the following error msg comes up: 'A Problem with Photoshop CS6 has caused the program to stop working, close programme?'
    Do I need to adjust my set-up to run this? The PC operates on a 32-bit  system/Windows 6.

    You need to provide much more info: What files are you trying to place into what document? What are the document sizes, resolution, color mode etc.? Anything else we should know about? This could be a million things from color profile issues to color space mismatches to the files to be placed being damaged or badly structured or a importer module being broken. Also provide exact system info and crash logs:
    Working with your Operating System’s Tools
    Mylenium

  • I too am experiencing the App Update indicating several updates are available...but none show and the Update All does not show either. I see several Apple products have this problem. Need a fix!

    Can anyone yet find a problem to the Apple Update Icon showing several updates are available...but...none show to actually update....just a blank screen. I have done several reset operations, including complete reset as recommended by others, but yet the problem remains. I need a fix to this so I can update the Apps indicated. Apple needs to publish this fix PRONTO.

    The update server is down; try this temporary workaround
    App Store>Purchased>Select "All"
    Note: Look out for apps that have the word "Update"
    http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg

  • After a recent software update my iphoto program no longer responds and freezes  the my imac

    After a recent software update I opened iphoto and was asked if I would like my photos geographic location used for mapping where photos were taken, I answered no and now Iphoto no longer responds and freezes all computer functions. Unable to force quite application. What can I do?

    This is iPhoto for iOS, not OSX.  Despite having the same name, they are completely different programs.  You should repost your question in the iLife/iPhoto area.

  • Updating CS6 & Bridge

    I cannot update CS6 or Bridge. When I click on the Adobe Application Update Manager I get the following message - "The update server is not responding. The server might be offline temporarily, or the internet or the firewall settings may be incorrect." I have turned off firewall and anti virus as well as tried updating several times over the last few days, each time the same message. Any help would be appreciated in enabling updates. Sherwin   

    In CS6, the auto updater should work.  But…
    If it still not working, try updating manually. there are precise, detailed instructions on the downlaod page.
    If you had mentioned your platform, Mac or Windows, I could have provided you a specific link.  You should be able to find it yourself, however.

  • I am unable to successfully download updates for Encore or any other CS6 related programs. I get an error code

    Whenever I am prompted that there are updates available for downloading for any of the CS6 related programs including Encore, I get the following message.
    Encore CS6 update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I210. Quitting and trying again makes no difference. Is anyone able to help please?

    Okay.
    For CS6, the page I linked has this to explore install logs:
    Troubleshoot install issues with log files | CS5, CS5.5, CS6
    Many of the updates you see are for associated elements that may not be needed (e..g. camera raw files).
    For Encore, on PC, the latest version is 6.0.2. On Mac, 6.0.1. If you have that version, you do not need to update.

  • Can I update my CS6 programs if I don't have the creative cloud?

    I recently bought the Standard Adobe Creative Suite CS6 as a downloadable program and was wondering if I can update this somehow even though I do not have the Adobe Creative Cloud.  I am a student and need the Adobe Indesign CC version for class and would really like to just update my existing CS6 version rather than subscribe to Creative Cloud or buy a whole new program.  I have the Adobe Applications Manager Executive Edition as well but have no idea if I can actually update my programs with it or what it just does in general. 
    Very Confused, Please Help.
    Thank You,
    Sydney

    There is no such thing. You have a fundamental misunderstanding. CC is the cloud and there is no way to get access other than with a subscription.
    Mylenium

  • Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help-

    Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…

    Many thanks.
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Lightroom 4 importing causing program to crash.

    Lightroom 4 will not import files. Windows 7 pop-up states; "there is a problem with this program that is preventing it from running correctly will check for solution". "Windows failed to find a solution must shut down program now".
    This prevents the import page from loading or working and no images can be imported using usb or SATA connections. Was able to use computer's built-in card-reader to read from Sd and compact cards, those were able to run in the import window only because of preference setting. "when a Memory card is installed import files" (preference-setting).  Any other means of importing files, the out-come is the program crashing and being shut down. All other functions outside the import menu seem to be working. Deleting all catalogs and then using the default catalog setting,  failed to clear issue.
    System info: Windows 7 64-bit, Intel i7 cpu, 16 gigs of ram, 4 one terabyte hard-drives.
    Solutions tried. Removing Lightroom 4, all catalogs, then running defrag, registry cleaner, before attempting to re-installing lightroom 4.  Removing lightroom 4 and installing lightroom 3.6 fails to fix issue. Removing all Lightroom products from hardrive,Including the windows program folder, windows programs data folder. Then rebooting re-running defrag, registry cleaner and re-installing lightroom 4 fails to fix importing issue. No way to contact support and links to user group fail to take me to correct user group. Question with the lead as lightroom 4 importing causes program to crash. Takes me to everything but lightroom solutions!  Now this takes me to photoshop user group which has nothing to do with lightroom. With lightroom 4 in the question itself, I get everything but lightroom solutions!

    Camera raw is built into Lightroom. It is the engine that makes the corrections within an image. You might not see as a seperate program, like earlier versions of Lightroom. Or having to launch it in a new window to work in camera raw. In version 4 of Lightroom it was made seamless and built into Lightroom.
    Lightroom 4 was installed in the admin log-in window. I have all useage rights to any file lightroom creates or adjusts. I am thinking that the Photoshop CS6 beta created some working problem within Lightroom 4. Now that the beta-test program is over, I think the problem is a result of removing Photoshop's last build, before the public beta was released. I do hope, Adobe is working on a solution for people experiencing importing problems with Lightroom 4. I am just grabbing at straws here, trying to find something that will work. I think the problem will go away once computer has the new camera raw build 7.0 that ships in Photoshop CS6. With so many versions of camera raw installed on the computer, I think Lightroom is having issues as a result. Let's hope a patch is in the works, Lightroom 4 is useless if importing files doesn't work correctly.
    B&H photo is taking pre-orders for the creative suites, right now. The only way to get support is by purchasing a subscription. Otherwise it is a $35.00 per issue fee. So, I am not sure of what upgrade path I will take. Not loving the cloud at all, with this year of Hackers, I seriously doubt that any cloud will prove to be safe to use. Why would, I want to post my hard work to a cloud where anyone can steal it? But that is a different topic.
    For right now the only way to import is by creating an empty folder on the same hard-drive that Lightroom resides on. Setting up auto-import in Lightroom Pref. file to check that empty folder. Folder has to be empty to set up. Then dragging image files into that empty folder. I discovered that Lightroom 4 will not open or look in sub-folders for images. Which means you lose keeping a day's worth of shooting seperate from other folders. Where Lightroom version 3.6 you could.There was a second auto-import that worked, with my built-in memory-card reader. Where in the Lightroom pref.file you can tell Lightroom to auto-import, when a memory-card is detected. ( this is the least viable option, because more memory card become damaged removing and reinstalling them). These were the only two methods, I could get images into Lightroom 4 and prevent Lightroom from crashing.  Might have to go back to using Nikon NX to import my images and using Bridge to catalog them.

  • MO: Operating Unit Non Usable Operating Unit for Multi-Org Conversion

    Hello Hussein
    I enabled multi org in 11i and mo Operating unit values set as Non Usable Operating Unit for Multi-Org Conversion, is ok to set is value or will that cause any responsibility.
    In R12.1.3 I am getting an error like this
    APP-FND-02902: Multi-Org profile option is required. Please set either MO: Security Profile or MO: Operating Unit profile option.
    Please advice
    Thanks
    Prince

    user12094010 wrote:
    Hello Hussein
    I enabled multi org in 11i and mo Operating unit values set as Non Usable Operating Unit for Multi-Org Conversion, is ok to set is value or will that cause any responsibility.This might cause issues.
    ORA-20001: APP-FND-2902: Multi-Org Profile Option is Required [ID 399910.1]
    How To Prevent the Profile Option MO: Operating Unit being set to NULL at Site Level? [ID 393560.1]
    In R12.1.3 I am getting an error like this
    APP-FND-02902: Multi-Org profile option is required. Please set either MO: Security Profile or MO: Operating Unit profile option.
    Please adviceR12 - Error ORA-20001, APP-FND-02902 Accessing Profile Classes Form With Multi-Org Access Control (MOAC) Enabled [ID 602141.1]
    Unable To Open Customer Account Details, Error :ORA-20001: APP-FND-02902: Multi-Org profile option is required [ID 987165.1]
    Entering to Profile Classes Gets Ora-20001, App-Fnd-02902. Multi Org Profile Option Is Required [ID 465132.1]
    Error 'ORA-20001: APP-FND-02902: Multi-Org Profile Option Is Required' When Open Account Details [ID 1406860.1]
    Some Web Pages Fail To Load After Patch Application [ID 1281328.1]
    You may also search MOS website for APP-FND-02902 and go through the docs.
    Thanks,
    Hussein

Maybe you are looking for

  • Adobe Media Encoder (AME) won't start!!

    Adobe Media Encoder (AME) won't start!! i have this problem and i can see that many people have it too!! when you gonna tell us the solution!!!

  • Problem installing Flash Player 11, latest version

    For days now, I have been attempting to install the latest Flash Player (due to consistent warnings that my installed FP is "vulnerable").  I have disabled Firewall; uninstalled existing FP; and still the installation stops at 7% - pause - jumps to 4

  • UNION ALL destroys performance

    Strangely, we have 2 queries, which when they run independently, run pretty fast (2 seconds for one, instantaneous for the other), but when they're concatenated into a UNION ALL query with no ORDER BY clause, it takes 45 seconds for it to run. We tri

  • Doubt on the motherboard drivers

    Hello guys, I'm very confused by the drivers of this Z97 gaming motherboard 7. First thing in the manual talks about two different chipset: Intel and ASMedia, I choose one ?, install both? or which one is better? About USB 3.0 driver the same dilemma

  • Keyboard - certain keys becoming unresponsive

    I've tried using two new keyboards and the same keys (namely the up arrow and shift key on the right side of keyboard) refuse to work. I don't know if it's a hardware issue of if I need to reload part of the operation system. Any ideas?