Updating database table via program

Hi,
I am updating a DB table (Sap standard table) via my program.
I have few doubts with regard to same. They are given below,
1. I came to know that it is not best practise to update the sap standard table via program using "update" statement. Why so? Is there any other way or statement in doing the same?
2. The sap standard table which i update via my program is BDRGIN. Now my question is, when my program is modifying the values of the table, if some other user also modifies the value at the same time via SE16 then conflict occurs. How to resolve it? Is SAP uses any automatic handling for such conflicts?
kindly help me out.
Regards,
Raghavendraprasad.N

Hi,
Its not a good practise to modify the Standards tables through programs, because most of the standard tables will be interdependant with forign key relation ships (check table relations). So incase we create an irrelavant entry, then it will cause a lot of confusions.
For example we create entries in MARA/MAKT table using MM01/02 transactions.
There are a few standard tables like TVSA (containing customising data), these have to be maintained through the SPRO transaction. You can open SPRO transaction and search for the node to maintain entries in it or you can go to the transaction SM30 and you can give the table name and click on customizng to go the SPRO node.
Still if you are trying to create entries in your table, Enque/Lock the table do the updations and then Deque/Unlock the table, so that there will be no conflicts happening during that time.
Regards,
S.Dakshna Nagaratnam.

Similar Messages

Effect of Updating Database statistics to program's performance

Hi,
What is the Effect of Updating Database statistics to program's performance?
Will the program run's faster after the update/
Thanks a lot!

Hi,
>
freishz wrote:
> What is the Effect of Updating Database statistics to program's performance?
update the statistics the optizer uses for making an execution plan.
The statistics contains values like:
table statistics:
- nr of rows of the table
- nr ob blocks / pages of the table
- nr of empty blocks / pages
index statistics:
- nr of distinct keys in the index
- nr of leaf pages of the index
- clustering factor of the index
- height (levels) of the index
column statistics:
- nr of distinct values for a (indexed) column
- low value and high value for a (indexed) column
>
freishz wrote:
> Will the program run's faster after the update/
with updated statistics the runtime of the program might be
- higher
- lower
- the same
it depends on the differences of the generated execution plan used after the update in
comparison with the execution plan used before the update.
In general the runtime will be the same or lower. But i have seen cases where updating
statistics lead to higher runtimes, but these are very rare.
Why are you asking this question? do you have slow sql with a inefficent execution plan?
statistics is one of many things that need to be analyzed...
Kind regards,
Hermann

Update database table

I have 1 million records in application server and I want to update database table from that.
Is UPDATE statement the best technique to do it.
Just wanted to know if there is any other better tehcniques.
Also i want to write the errors to job log. How can we do that?
Regards,
DNP

If they are all new records or all changes, it would be best to use INSERT or UPDATE. You will also want to do mass inserts/changes using an internal table. Since you have so many records, you will probably have to do this in chunks in order to avoid dumping on the rollback area.
Rob

How to update database table !!!

hi all,
Please advice how to update database table with certain cndition needs to be checked.
Please consider below scenario.
have used enqueu and dequeue function to lock entries and also i have used BAPI so considering that return parameter . i want to update table
/tdk/st0027.
1. I want to update database table
2. there are certain condition needs to be checked like ,
   loop at it_final into wa_final.
th_return-type = 'S'.
           if th_final-vbeln = /tdk/st0027-vbeln and
              th_final-posnr = /tdk/st0027-posnr and
              th_final-etenr = /tdk/st0027-sdslno.
above condition which i need to check .and need to append below system fields need to be appended in table.
          th_final-prstsind = '20'.
          th_final-chgdate = g_date.
          th_final-chgtime = g_uzeit.
          th_final-chgprog = g_cprog.
          th_final-chguser = g_uname.
          append th_final to td_final.
          update /tdk/st0027 FROM th_final.
          endif.
endloop.
but i am getting error saying that "The type od database table and work area (TH_FINAL) are not unicode convertible"?
I am not able to understandwhat would be the solution for this ?
Thanks and regards,
Prasad K. NAralkar

The error occurs in the UPDATE statement included in the code. In this statement it is seen that there is a mismatch of structure defined for the DDIC table /tdk/st0027 and that of your work area th_final.
try to create a structure w.r.t the DDIC table.
Eg: DATA: wa_temp TYPE /tdk/st0027.
MOVE-CORRESPONDING th_final TO wa_temp.
Then try to UPDATE using the temporary work area i.e wa_temp which has structure similar to that of the database table.

Enqueue and Dequeue before updating Database table

Hi all,
We are updating database tables using INSERT, MODIFY and UPDATE statements. Since many people will be running the application at the same time we need to lock the table before updating database table. So we need to use ENQUEUE and DEQUEUE functionality for this purpose.
Can any plz explain what are the steps we should follow now?
Thanks in advance.

Hi,
Any Database access should carefully handled as multiple applications may be accessing the database at the same time. To read a record from the database you don't need to implement a lock, but to write you need not only locks but also ideally should use the Update Function Modules to comply SAP "All or Nothing" Principle. This will prevent data inconsistency of the database and the data will be proper state. You need to use the COMMIT WORK and ROLLBACK WORK in you code to handle the consistency part of the database.
The best design approach would be seperate the Database Layer completely from the business layers. This will make your code robust and easy to maintain.
As, for the Locking Concepts, you will get multiple resources from SDN as how to create Locks and implement the Locking modules in your code. But more than that what matters is why and how to implement the SAP Locking concepts to make your application run better.
Have a look at the following link
http://help.sap.com/saphelp_nw70/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
Hope this helps.
Thanks,
Samantak.

Doubt in updating database table

hi all
i want to modify values ztable from a internal table ....
for eg : the ztable contains matnr and accept_qty
matnr qty
mat01
mat02
i need to modify qty of the table .. i am using where condition (ie modify where matnr = ) but where condition is not working for database tables .... how to proceed with this ..
thanks
lokesh

hi,
before that :- modify statemnt will modify a record if there is record having the same key like that of record in work area.
if there is no record in itab with key of work area record, it will insert a new record in itab.
look this sample code.
*modify internal table
loop at itab into wa.
wa-field1 = data1.
wa-field2 = data2.
wa-field 3= data3.
modify itab from wa transporting field1 field2 field3 where key_field = wa-keyfield. "there shuld not be any chang in key field.
endloop.
*now update database table
*work area and data base structure shuld be same type
if itab[] is not initial.
modify ztable from table itab.
endif.
rgds
anver
if hlped pls mark points

Table control program for updating database table

Does anybody have a sample code for a table control program which can insert/delete/update a database table?
I mean like on the output on table control, if the user insert/delete/update the records, the corresponding records will be updated in database table also.
Appreciate your input.
Thanks.

hi nuren,
TABLES: kna1,knbk.
DATA: v_kunnr LIKE kna1-kunnr.
DATA: v_check TYPE c.
DATA: BEGIN OF it_knbk OCCURS 0,
      banks LIKE knbk-banks,
      bankl LIKE knbk-bankl,
      bankn LIKE knbk-bankn,
      bkont LIKE knbk-bkont,
      koinh LIKE knbk-koinh,
      chk TYPE c,
      END OF it_knbk.
DATA: v_ucomm TYPE sy-ucomm,
      v_dynnr TYPE sy-dynnr.
DATA: l_index TYPE sy-index.
data: count type i.
CONTROLS: tc1 TYPE TABLEVIEW USING SCREEN 0200.
*&      Module STATUS_0100 OUTPUT
      text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ABC'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE user_command_0100 INPUT.
v_ucomm = sy-ucomm.
CASE v_ucomm.
    WHEN 'DISP' OR 'CHNG'.
      IF v_kunnr <> space.
        SELECT banks
               bankl
               bankn
               bkont
               koinh
               FROM knbk
               INTO TABLE it_knbk
               WHERE kunnr = v_kunnr.
        LEAVE TO SCREEN '0200'.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module MOD_KUNNR INPUT
      text
MODULE mod_kunnr INPUT.
IF NOT v_kunnr IS INITIAL.
    SELECT SINGLE
           kunnr
           FROM kna1
           INTO v_kunnr
           WHERE kunnr = v_kunnr.
    IF sy-subrc <> 0.
      MESSAGE e000(zz) WITH 'INCORRECT CUSTOMER NUMBER'.
    ENDIF.
ENDIF.
IF v_kunnr IS INITIAL.
    MESSAGE e000(zz) WITH 'PLEASE ENTER A VALUE'.
ENDIF.
ENDMODULE.                 " MOD_KUNNR INPUT
*&      Module STATUS_0200 OUTPUT
      text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'ABC1'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module SCREENMOD OUTPUT
      text
MODULE screenmod OUTPUT.
IF v_ucomm = 'DISP'.
    LOOP AT SCREEN.
      screen-input = 0.
      MODIFY SCREEN.
    ENDLOOP.
ELSE."if v_UCOMM = 'CHNG'.
    LOOP AT SCREEN.
        IF screen-group1 = 'G1'.
          screen-input = 0.
        ELSE.
          screen-input = 1.
        ENDIF.
     MODIFY SCREEN.
    ENDLOOP.
endif.
if sy-ucomm = 'INSE'.
loop at screen.
IF ( tc1-current_line <> tc1-lines ).
screen-input = 0.
else.
screen-input = 1.
modify screen.
endif.
endloop.
endif.
ENDMODULE.                 " SCREENMOD OUTPUT
*&      Module EXIT2 INPUT
      text
MODULE exit2 INPUT.
LEAVE TO SCREEN 0.
ENDMODULE.                 " EXIT2 INPUT
*&      Module modify INPUT
      text
MODULE modify INPUT.
      IF v_check = 'X'.
        it_knbk-chk = 'X'.
        MODIFY it_knbk index tc1-current_line.
      ELSE.
        CLEAR it_knbk-chk .
     ENDIF.
ENDMODULE.                 " modify INPUT
*&      Module USER_COMMAND_0200 INPUT
      text
MODULE user_command_0200 INPUT.
v_ucomm = sy-ucomm.
CASE v_ucomm.
    WHEN 'DELE'.
        DELETE it_knbk where chk eq 'X'.
        DESCRIBE TABLE it_knbk LINES tc1-lines.
    WHEN 'INSE'.
      CLEAR it_knbk.
      APPEND it_knbk.
      DESCRIBE TABLE it_knbk LINES tc1-lines.
    WHEN 'LIST'.
      LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN '0200'.
      WRITE 'Report'.
    WHEN 'BACK'.
      LEAVE TO SCREEN '0100'.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0200 INPUT
*&      Module validate INPUT
      text
module validate input.
IF IT_KNBK IS INITIAL.
MESSAGE E000(ZZ) WITH 'A BLANK LINE CANNOT BE SAVED'.
ENDIF.
endmodule.                 " validate INPUT

Updating a table via a gui program

i am trying to update a record via the UPDATE function. My program has a show all button that brings in all the records. When i make a change in the record and click Update. I get the error: Syntax error in string in query expression ''00000' the zeroes represent an updated zipcode. Here is my source code for the update function:
if(e.getActionCommand().equals("Update"))
String url = "jdbc:odbc:coffee";
String driver= "sun.jdbc.odbc.JdbcOdbcDriver";
Connection con= null;
Statement stmt =null;
//PreparedStatement stmt = null;
ResultSet my_result= null;
/* String query = "Update CoffeeSuppliers set " +
"Name='" + comp_Name.getText() +
"', Address='" + comp_Addr.getText() +
"', City ='" + comp_City.getText() +
"', State='" + comp_State.getText() +
"', ZipCode='" comp_zipcode.getText()
"' WHERE ID=" + comp_ID.getText();
String query= "Update CoffeeSuppliers set " +
"ID='" + comp_ID.getText() +
"', Name='" + comp_Name.getText() +
"', Address='" + comp_Addr.getText() +
"', City='" + comp_City.getText() +
"', State='" + comp_State.getText() +
"', ZipCode='" + comp_zipcode.getText();
try
Class.forName(driver);
catch(java.lang.ClassNotFoundException exception)
System.err.print("ClassNotFoundException: ");
System.err.println(exception.getMessage());
try
con = DriverManager.getConnection(url,"app","app");
stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
my_result= stmt.executeQuery(query);
stmt.executeUpdate(query);
while(my_result.next())
System.out.println("am i in the while loop");
my_result.updateString(1,comp_ID.getText());
my_result.updateString(2,comp_Name.getText());
my_result.updateString(3,comp_Addr.getText());
my_result.updateString(4,comp_City.getText());
my_result.updateString(5,comp_State.getText());
my_result.updateString(6,comp_zipcode.getText());
my_result.updateRow();
stmt.close();
con.close();
catch(SQLException sqlex)
System.err.println("ERROR: " + sqlex.getMessage());
} //end of the if statement
Any feedback will be great.
thanks

String query= "Update CoffeeSuppliers set " +
"ID='" + comp_ID.getText() +
"', Name='" + comp_Name.getText() +
"', Address='" + comp_Addr.getText() +
"', City='" + comp_City.getText() +
"', State='" + comp_State.getText() +
"', ZipCode='" + comp_zipcode.getText() + "'";I think that it is as simple as the fact that you diddn't close the zipcode string literal being passed to the SQL interpreter. Add the closing ' to the query
Hope this helps,
Bamkin

How to find out who updated database tables

Hi
We are using Oracle Database 10g Release 10.2.0.4.0.
A user, via pl/sql developer, has been updating data on our database. This resulted in certain reports not balancing. At that time, we did not have database triggers on the tables concerned. We now need to go back at least a month or more to see who had updated these tables. We have a username, is there any script that we can use? How accurate is v$active_session_history? Would it give us all the info we need?

781424 wrote:
Hi
We are using Oracle Database 10g Release 10.2.0.4.0.
A user, via pl/sql developer, has been updating data on our database. This resulted in certain reports not balancing. At that time, we did not have database triggers on the tables concerned. We now need to go back at least a month or more to see who had updated these tables. We have a username, is there any script that we can use? How accurate is v$active_session_history? Would it give us all the info we need?It is little easy to know with AUDITING, or use Log miner to analyze log files.

Updating database table for 'CHANGE' and 'ADD' buttons.

Hi,
I am working on module pool program. Here i am using table control.Below is my requirement:
1) I have designed a selection - screen with 'CHANGE' and 'DISPLAY' buttons and in screen 100 i have 'ADD' and 'SAVE' buttons.
2) when i click on 'CHANGE' , it will move to screen 200 here i need to change quantity field for that particular record which is in table control.once i change the field value and click on 'SAVE' a message should be populated that "RECORD IS SAVED' and this record should be updated in database table with new quantity field value and it should return back to my selection screen.
3) When i click on 'ADD' , it should display already existing records in disable mode and a new line should be added inorder to enter new records. Once i enter the data and click on SAVE, this new record should be saved in the database table along with existing records.
Kindly suggest me a sample code for this as am new to table control in module pool programming.

Hi Gaurav,
I've a similar problem!! any solutions to your problem!!

Updating database table from co11n transaction ?

I got a requirement to add two new addional fields and want to save it in the standard table for reporting purpose. I follwed the steps like :
1. I created new fields in the table AFRU using appending struture. and activated it using se14.
2. I created a project and entered the enhancment (CONFPP07) and i created the screen-exit. then i declared thse two fields in the include : ZXCOFTOP. once i activated the screen exit it appeared in the CO11N TCODE but when i enter some values in this fields , its getting stored in the variable but i dont know how to store this value in the table AFRU .
3. for updating i used the exit CONFPP05 and my would be like AFRUD_TAB-ZZSHIF = CAPTAIN.
but the problem is its not getting updated in the database table AFRU.
should i have to use module ...endmodule in ( SAPLCORU_S - 900 screen , exit : CONFPP07 ) and write code... , like the we follow
for ztransaction or how should i solve this issue ?

So, according to your code, it means that :
1) your screen field is WA_AFRUD-ZZSHIF
2) WA_AFRUD is declared as global (in ZXCOFTOP)
Is that true?
In PAI: EXIT_SAPLCORU_S_101, you should only do:
move wa_afrud-zzshif to es_afrud-zzshif.
In Exit : EXIT_SAPLCORF_105, you have to replace 'A'
LOOP AT AFRUD_TAB.
AFRUD_TAB-ZZSHIF = *wa_afrud-zzshif.* "'A'
MODIFY AFRUD_TAB.
ENDLOOP.
Note that LOOP AT is problable not the good coding (I think that this exit has to remain empty), it was just a test to check it works
Did you think to activate your project in CMOD? (you have to activate both project, and the exits)
Are you sure your exit is called. Did you debug it?
See also Note 12831 (program SAPRSMODCHECK) to check there is no problem between project/exits
Edited by: Sandra Rossi on Oct 17, 2008 6:59 PM

Updating database table using ALV Grid class CL_ALV_CHANGED_DATA_PROTOCOL

Hi,
I am trying to use class CL_ALV_CHANGED_DATA_PROTOCOL to update a database table from an ALV grid.
I have used program BCALV_EDIT_04 as an example.
I am able to successfully processed inserted or deleted lines using the attributes
MT_DELETED_ROWS
MT_INSERTED_ROWS
but I also want to process modified lines.
I was just wondering whether anyone out there has some example code for this.
I can see that there are the following attributes available
MT_MOD_CELLS
MP_MOD_ROWS.
I would ideally like to use MP_MOD_ROWS rather than MT_MOD_CELLS but it is not clear to me what type MP_MOD_ROWS is.
If anyone has any example code for this sort of thing, please let me know.
Thanks,
Ruby

hi Ruby,
Yes we can use that *data reference variable *.
It is a variable( something comparable to a pointer ) that points to a int table( table with changed contents )
which ll be created at run-time based on the data type ot the internal table that we pass to the parameter it_outtab of method set_table_for_first_display ...
assign er_data_changed->mp_mod_rows->* to a field-symbol and use it...
Check the below code for example -> method refresh_changed_data
screen flow logic.
PROCESS BEFORE OUTPUT.
MODULE pbo.
PROCESS AFTER INPUT.
MODULE pai.
main program.
*       CLASS lcl_event_responder DEFINITION                           *
CLASS lcl_event_responder DEFINITION.
PUBLIC SECTION.
    DATA : ls_changed_cell TYPE lvc_s_modi,
            lv_language     TYPE spras..
    METHODS refresh_changed_data FOR EVENT data_changed
                                  OF cl_gui_alv_grid
                                  IMPORTING er_data_changed
                                            e_ucomm.
ENDCLASS.                    "event_responder DEFINITION
TYPES tt_makt TYPE STANDARD TABLE OF makt.
DATA: go_handler         TYPE REF TO lcl_event_responder,
      go_grid            TYPE REF TO cl_gui_alv_grid,
      gt_fieldcat        TYPE lvc_t_fcat,
      gv_language        TYPE spras VALUE 'E',
      gt_outtab          TYPE tt_makt,
      gs_tableline       TYPE LINE OF tt_makt.
FIELD-SYMBOLS : <changed_rows> TYPE tt_makt.
CALL SCREEN 100.
*       MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
SET PF-STATUS 'BASIC'.
PERFORM create_and_init_alv CHANGING gt_outtab[]
                                       gt_fieldcat.
ENDMODULE.                    "pbo OUTPUT
*       MODULE PAI INPUT                                              *
MODULE pai INPUT.
LEAVE PROGRAM.
ENDMODULE.                    "pai INPUT
FORM create_and_init_alv CHANGING pt_outtab LIKE gt_outtab[]
                                  pt_fieldcat TYPE lvc_t_fcat.
CHECK go_grid IS NOT BOUND.
CREATE OBJECT go_grid
    EXPORTING
      i_parent = cl_gui_container=>default_screen.
PERFORM build_display_table.
PERFORM build_fieldcat CHANGING pt_fieldcat.
go_grid->set_table_for_first_display( CHANGING it_fieldcatalog      = pt_fieldcat
                                                  it_outtab            = pt_outtab ).
go_grid->set_ready_for_input( 1 ).
* raises the 'data_changed' event when we select another cell/any action after changing the data
go_grid->register_edit_event( EXPORTING i_event_id = cl_gui_alv_grid=>mc_evt_enter ).
CREATE OBJECT go_handler.
SET HANDLER go_handler->refresh_changed_data FOR go_grid.
ENDFORM.                               "CREATE_AND_INIT_ALV
FORM build_display_table.
FREE gt_outtab.
SELECT * FROM makt UP TO 20 ROWS INTO TABLE gt_outtab WHERE spras EQ gv_language.
ENDFORM.                               "build_display_table
FORM build_fieldcat CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'MAKT'
    CHANGING
      ct_fieldcat      = pt_fieldcat.
LOOP AT pt_fieldcat INTO ls_fcat.
    ls_fcat-edit       = abap_true.
    MODIFY pt_fieldcat FROM ls_fcat.
ENDLOOP.
ENDFORM.                               "build_fieldcat
*       CLASS event_responder IMPLEMENTATION                          *
CLASS lcl_event_responder IMPLEMENTATION.
METHOD refresh_changed_data.
    ASSIGN er_data_changed->mp_mod_rows->* TO <changed_rows>.
    LOOP AT <changed_rows> INTO gs_tableline.
      BREAK-POINT.
    ENDLOOP.
ENDMETHOD.                    "click
ENDCLASS.                    "event_responder IMPLEMENTATION
Cheers,
Jose.

Browse and update database tables

I'm looking for a tool that will let me connect to an Oracle database, select a table and some fields off the table and build a simple java class to navigate / update the data.
Essentially, I'm looking for a tool that replicates the way Microsoft Access can build a form for navigation and update of a database table.
However, I want to use java, not MS Access.
Any ideas if such a tool is available ?
Thanks

http://squirrel-sql.sourceforge.net/

Updating database table based on BAPI response in case of error

Dear Experts,
My scenario includes pulling records from database stagging table, and push one record at a time to BAPI_ALM_NOTIF_CREATE.
I am using sender JDBC adapter(with select query and update query to mark records as processed).
My question is : Once XI selects records, immediately status is updated in stagging table for the selected records as processed. what if BAPI could not create document? In this case I need to update status of that record as "Not processed".
What should I use?
If BPM, then please tell me the steps.
Is this possible without BPM?
What are the chances of failure between XI and BAPI?
Please provide your inputs.
Thank you.
Div

>
S.R.Suraj wrote:
> Hi Divyesh,
>
> Your steps are correct..
>
> 1. JBDC will read record with code = 0 and make it 1...
> 2. Once the bapi process is completed all these read records shoudl be made as 2 (if completed successful) else 0 if bapi went into some error.. so that again the jdbc adapter can poll these records and give back to bapi for processing...
>
> Now your questions
> >>So after selection and updation only proxy call will be done right? So for every polling of jdbc adapter ,proxy call will happen?
> YEs every poll of jdbc will result in a proxy call and every time it will contain next set of records (as the earlier one have already marked as 1)
>
> >>How to achieve this?
> Since this is a synchronous scenario JBDC->XI->Proxy and reverse, I have suggested to use responseonewaybean as a module in sender jdbc adapter (because sender jdbc cannot act synchronously thats why you need to use this module)..
>
> >>Do i need to use BPM? please suggest steps.
> and if this is not working then go for BPM..the steps as i mentioned in my first thread..
>
> Regards
> Suraj
Hi Suraj,
Thanks a lot for your support.
It would be good if you can provide your inputs.
Stagging table records status:
Flag = 0 (XI will poll records)
Flag = 1(XI has polled records and XI will se tthis flag by JDBC adapter)
Flag =2 (should be done based on response from Proxy Tables parameter) Proxy will set tables parameter which will include info on error message and type.
(Now based on new requiremets: for error records status should not be reset to 0 so that XI can poll records again, now stagging table should contain error records(for which proxy can not create notification in SAP) with error message and status flag 2)
Now scenario would be JDBC to Proxy.
Polling interval for JDBC adapter should be 1 minute.
So I think status 0 to 1 will be done by XI after immediately selecting records.
But how about Status 2 that has to be set only for error records only and with error information.
I have to update stagging table records with status 2 and error info based on proxy table response. How this can be done?
This updation will be done in case of error only.
I was thinking this aproach:
We can have two interfaces.
First interface will be jdbc to proxy:
JDBC adapter select and update records with flag =1 and then send to proxy call and create document in SAP. At SAP side if document can not be created then they will store that error info in some table.
Second Interfgace:
Client SAP Proxy will periodically run and send these error records info to XI and XI will update stagging table records accordingly.
Suraj, What is your sugestion in this solution? Do I need to use Responseonewaybean?
Thanks Suraj
Div

Not updating database table after editing using theADFapplicationJdev10.1.3

Hi
I created the Sample Browse and Edit JSF JSP page oracle ADF application as explained in the cuecards in Jdev10.1.3.
After editing the department table rows in browser i am checking the database tables for the changes.
But my table are still with the old data.they are not updating with the values i changed in the browser.
i followed the steps correctly as explained in cuecards.
where i am going wrong.
What i have to do to commit the changes in to database in my ADFApplication.Did i need anything to add my code.

In Jdev 10.1.3,there is no operations folder directly under the Application data module control.
there is only constructors,merge entity,persist entity,refresh entity,remove entity and findalldepartments(),findallemployeeas() nodes under the application data module control.
In findalldepartments,findallemplloyees the operations node is there.under that i don't have the commit .i have only create,execute,first,previous,last,next,delete,removerowwithkey,setcurrentRowWithkey,setcurrentRowWithkeyValue under the operation node.
so how can i commit the operations in database.
Please help me.

Updating database table via program

Similar Messages

Maybe you are looking for