Updating Equipment from SAP R/3 to CRM

Hi ,
In my Current Scenario, Equipments Created in the SAP R/3 will replicated to SAP CRM system as a Objective for I Base . at the same it will create IBASE Hierarchy . an installed base component is created for the individual object. Both objects are linked to one another so that the installed base components point to the individual object .
Both Component Description & Objective Description Should be same.
Now Issue was, we have changed Equipment Description in R/3 System and it will replicated in to SAP CRM system perfectly . But component Description still showing old one even Objective shows updated Description
1) Is this SAP stranded functionality defined like this ? if not could please some one suggest solution for this ...
Regards
Ravipati

Check the links
Integration between mySAP and CRM using XI
How to make integration with CRM system with XI
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
CRM XI Integration
Regards.

Similar Messages

Extracting updated data from SAP R/3 to BOBJ DS

Hi all,
I have a doubt reg extracting updated data from SAP to BOBJ DS. For example i am extracting 50000 records from SAP table to BOBJ DS say its taking half an hour, after extracting data 10 more records have added in the same table. Do we need extract the whole record again or do we have some other way to extract only those 10 records from table.
Please help me. I have searched in forums but cudnt find the exact solution fyi.
Thanks,
Guna

Apart from stepd 1,2, you need to create a Target Data store and a table to load your MARA data.
3. Now the MARA data will be available in data store(DS_ERP), say table name as BO_MARA
Why do you want to change the table name? Are you planning to stage the data anywhere?
4. Create a dataflow source as BO_MARA, query transform and destination as a table
Data transport object is required if you are using R/3 Data Flow.
This would suffice just for a full load, if all your transformations can be incorporated inside the Query transform.
5. Do Transformation.
6. Transformed data will be available in target table.
Only after executing the job that the transformed "data" will be available in the target.
The above part mentions only about a Source, Query transform, Source Data Store and table.
Apart from these
You would require a Script object to write the condition, to SELECT the MAX timestamps. You would require Variables to be created in your job to redirect your job path and to restrict the data extracted.
Use your DataFlow in a Conditional object. If load type is first, in the then part use the dataflow which you might have already designed. Else part will have a replicated Data Flow with the above mentioned WHERE condtion in Query transform.
Suggest you to refer Desiger document and DI supplement for SAP as well. Inform if you are stuck.
Regards,
Suneer Mehmood.

Data Transfer from SAP R/3 to CRM System

Hi Experts,
I need the Busniess Partner Data in CRM system from SAP R/3. Can i do this by ALE or is ther any other way to do it?..If i need to do it by ALE can anyone pls let me know what message type should i use and the steps that i have to follow.
Thanks & Regards
Sathish

Check the links
Integration between mySAP and CRM using XI
How to make integration with CRM system with XI
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
CRM XI Integration
Regards.

Deleting Equipment from SAP R/3

Once I set the cancel flag for an equipment how I can delete completely from SAP R/3 the equipment?
Thanks

Hi Magnelli,
Yes you can delete the equipment from the database through archiving process.
SAP says that if you want to archive and delete the equipments then you have to first archive and delete following documents
such as 1. Maintenance Plans 2. Serial Number History 3. Service and Maintenance Orders, 4. Routings, 5. Maintenance Notifications, 6. Quality Notification, and 7. Service Notifications.
Archiving Equipments can be done by using archiving object PM_EQUI.
Check Archiving Object Technical settings ....See that deletion is automatic.
Steps are:
Easy access --> SARA ---> Write ---> create write variant and select all the eqipments that you want to delete ---> click Attributes --> Enter the text in Meaning field ---> SAVE.
2. Maintain Spool parameter
3. Maintain Start date
4. Execute and check the session number in job log.
With this you archiving and deletion will be done in one step.
-Thanks,
Ajay

How to updata data from SAP EP into SAP R/3 ?

Hi,
How to create the material from SAP CE 7.1 into SAP R/3. Is BAPI the only way for this or there is some other solution.
Also, please explain how to use BAPI in this scenario.
Regards,
Yogita.

Please look into the following link
http://help.sap.com/saphelp_nw70/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm
Thanks,
Raju Bonagiri

Synchonize cusotmer master data from SAP R/3 to CRM

Dear Sir,
My SAP R/3 is ECC6 , but my crm is CRM5.0
I have the question that I would like to synchonizat data ( field in Sales Area data : Sales district, Sales Office , Sales group, customer group ) in R/3 and link to CRM ?
Where can i find these fields in CRM?? and where can I find the mark for delete for customer master data field in CRm Please kindly advise
THank you and best regards,
Vimol

Hi Vimol.
If the CRM and ECC are all connected (like RFC's/logical systems/...) for synchronizing the data you need to do the initial loads. SAP has different objects for different data loads. Please follow B09_BB_ConfigGuide_EN_US(CRM Replication) for the same.
Hope this helps,
Karuna.

Not transfer field KNA1-STCD2 from SAP R/3 4.70 to CRM 3.0

Hello to all.
We decided no to use the field KNA1-STCD2 in all the customers created in SAP R3 4.70 and we want not to transfer this field from SAP R/3 4.70 to CRM 3.0. There are several customers with value in this field in R3 but they never were transferred to CRM.
Is there any way to get this? We are looking for any exit where we can delete this field in R3 but we hace not found anything yet.
Thanks in advance.

Try XD99 Customer Master Mass Maintenance. It will permit you to perform mass maintenance to one or multiple fields. Leave the field blank in the "NEW" value to update with blank.
Try with 1 - 10 customers to see that test is working. Then execute for all customers (or as per requirements).

Replication of functional location and equipment from ECC to CRM.

Hi Guys
I have activated the required BADI's and adapter objects for func loc and equipment. but i am not able to replicate the funcloc and equipment from ecc to crm.

As of SAP CRM 7.0 you can replicate functional locations from SAP ERP to SAP CRM. This function is supported as of SAP enhancement package 4 for SAP ERP 6.0.
In SAP CRM, functional locations are represented as object components of an installed base. The structure of functional locations is also replicated, and reflected in the installed base structure. If you replicate functional locations and pieces of equipment, the assignment of equipment to functional locations is also reflected in the installed base structure. The following replication processes are available:
- Initial download of functional locations from SAP ERP to SAP CRM in R3AS tcode.
Bye,
sekhar.

Upload/Read Documents from SAP-CRM to/from SharePoint

Hello ,
We have a requirement to upload documents from SAP CRM to share point(select the document from the desktop and pass the data to sharepoint server) , the user should also be able to view the documents located in Sharepoint.
There are web methods in SharePoint already developed which will allow the uploading of the documents and passing the location of the stored documents as URL back to CRM.
Could any one please help me in the follwoing
1. Configurations to do on SAP side for Calling the methods developed in Sharepoint.
2. Configuration to pass the document from SAP CRM(Uploaded from desktop) to sharepoint.
Thanks in advance

Hi Ravi,
We also have a similar requirement in which we need to read the document stored in an external server from SAP CRM. Can you please let me know know how you achieved this. I will know the exact path (URL) of the document. Using this is it possible to retrieve the content of the document.
Regards,
Sudha.

How to update Records of SAP table from .CSV file

Hi,
I have written a code which takes a data from (,) delimited CSV file and adds it into the Internal table.
Now I want to update the all fields in SAP table with the Internal table.
I want to use Update statement.
Update <table Name> SET <field needs to update> WHERE connditon.
I don't want to iterate through thousand on record in sap table to check the where condition.
Could you please tell me how to do it.

Hi. I thing you will not workaround the iterating of the internal table.
You can pre-load all the records into another internal table
check lt_csv[] is not initial. " important, otherwise next select would read all records of the table
select .... into lt_dbitab for all entries in lt_csv where key-fieds = lt_csv-key_fields...
check sy-subrc eq 0 and lt_dbitab[] is not initial.
then do in-memory update of the it_dbitab
loop at it_dbitab assign <fs>.
read table lt_csv assign <fs_csv> with key ... " lt_csv should be sorted table with key, or you should try to use binary search
if sy-subrc eq 0.
...change required lt_dbitab fields: <fs>-comp = <fs_csv>-comp...
endif.
endloop.
ant then you can do mass-update
update dbtab from table lt_dbitab.
From performance view, this solution should be much faster than iterating lt_csv directly and updating every single database record
Br
Bohuslav

Replication of Equipment from R/3 to CRM

Hi Experts
I am writing because i have a problem in the replication of the equipment from R/3 to CRM.
I can replicate the equipment well, but some information is missing in the transfering. Example:
In R/3. Tx. IE03, The tab SerData have the Customer Number.
I need to transfer that number to CRM.
In CRM. Tx. IB53, i can see my equipment replicated, but there is no information about the customer number.
Please help on this issue
Points rewarded
Thanks

Kindly check the partner function whether that partner function of customer in ECC, is defined in CRM. If it is not defined then it will not copy to IBase while data transfer.
Reward points if helpful.

Help needed in transferring IDoc from SAP CRM to XI

Hi All,
We are facing an issue in sending an IDoc from SAP CRM to XI system. The IDoc is triggered and the status is showing as 03 in SAP CRM system(WE05 is used) but it is not getting replicated in XI System. This is verified by logging into XI System and cross checked the records retrieved by executing the transaction IDX5. No entry is found for this IDoc.
In SM58 transaction, it is giving the status text as EDISDEF:Port SAPRIO segment defn E201CRMXIF_BILLI.
Any pointers on this issues will be very helpful. We are able to send information from XI to CRM.
The project is an upgrade one and the IDocs are developed earlier and were working fine one week back and no changes were made recently.
Thanks,
Udaya

Hi Kapil,
Thanks a lot for your help. We need to delete and recreate Metadata. This is a typical problem that is encountered during upgrade projects.
Thanks,
Udaya

Update Master Data From SAP R/3

Hi ,
Im new for CRM. How to upload the Master data ( Customer , Material ) to CRM.
Any configuration possible .. pls let me know
Prakash

Hi Prakahs,
You have to do a initial download in order to connect both systems and make data transfer process available.
You can guide from SAP best practices allocated in:
<a href="http://help.sap.com/bp_crmv340/CRM_DE/BBLibrary/html/BBLibrary.htm">http://help.sap.com/bp_crmv340/CRM_DE/BBLibrary/html/BBLibrary.htm</a>
Please follow building blocks C73, B01, C71 y B09 in order to do it.
Hope this helps
Regards
Javier Merino
Please reward answer if you're satisfied.
Message was edited by: Javier Merino Vivar

Equipment download from ECC 6.0 to CRM 7.0

Hi Guys,
I am trying to Replicate equipments from ECC 6.0 to CRM 7.0
I did all the activities as specified still encountering issue while replicating.
I did following activities
1) Default settings
OLTP-EQ-0401-0401-X(Delta)
2) BADI - CRM_EQUI_LOAD_STDIMP (Activated)
3) Specify adapter object for uploading objects
0401 - DNL_EQUIPMENT
I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
A) I checked SMQ1, SMQ2 - No Queues are blocked.
B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
I checked the BDOC Message for the passed lines in SMW01 it says
1) Start of Initial load.
2) No Objects were selected.
In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
Please correct me if I am following a wrong process or forward me the check list for Equipment load.
I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
Please advice.
Thanks,
SURESH.

Hi,
go to ERP.
check there the table CRMRFCPAR
Is there an entry for OBJ_NAME EQUIPMENT?
If no create it.
If yes check this entry if everything looks fine.
Afterwards start a new initial load.
Best regards
Manfred

Unable to save PDF file to local drive from sap after Above reader XI update.(Not as sap issue ,this is related to Adobe)

Hi All,
Users are unable to download/save file from sap after a adobe XI update.(no pop comes to save/open)
Surprisingly,i am able to do so on my system without any adobe plug ins disabled or any registry editing.
This is a strange behaviour and need to be resolved Asap....
I contacted sap..this is not sap issue..this is a pure adobe reader bug.
Please need help on this experts
Feel free to comment for further details
kind Regards,
Sumit
Mail me at [email protected]

Hi ,
Please tell us a lot more.
- Is SAP running a local process, or something in a web browser?
sap is running via SAPGUI ,no java system
- What system?
Users facing issue in all system
- What browser?
IE 9.0.28
- Can PDFs from other sources be downloaded?
Yes,they are downloaded.
More Details-I did some tricks below which resulted in open/save popup......tht is not recomended by IT team...i need a permanent solution
In IE, goto menu Options -> "Manage
Addons", select in box "Show:" "Run without
permission", then you see the Adobe PDF plugin
Ichanged status to "Disabled
Also, if i change the registry key settings for users as
HKEY_CLASSES_ROOT\AcroExch.Document.11
Value: EditFlags
Changed: 0x00000100
to 0x00000000
(Remove the "Open always with this
program" option)
ITS WORKING.....
But,in my system i need not to do all this settings and surprisingly it is working only for me,rest all users are facing this issue.....
If any one using Lync ,communicator ..do let me know..i wil show the actual scnerio.
Kind Regards,
Sumit

Updating Equipment from SAP R/3 to CRM

Similar Messages

Maybe you are looking for