Updating Exchange 2010 SP2 to SP3UR9

Dear Experts,
I am currently preparing my SBS 2011 for a migration to Server 2012 R2 with Exchange 2013 installed. On my SBS 2011 I ran the Best Practices Analyzer 1.3 and it mentions that "the most recent Update Rollup is not installed". In the Exchange
Management Console I see that I have Version 14.2 (Build 247.5) installed.
I have seen that there is an Exchange SP3 along with Update Rollup 9 available. I have installed all Windows Updates - no Exchange rollups were installed. Should I update to 2010SP3UR9? How do I best perform this update - install 2010SP2RU8, then 2010SP3
and finally 2010SP3UR9?
Thanks for your help.

You have to upgrade to 2010 SP3 first, then upgrade to the latest RU after that.
I would also ask in the SBS forums as sometimes there are special considerations around upgrades.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Similar Messages

Updating Exchange 2010 SP2 to SP3

Hi,
I'm trying to migrate our Exchange 2010 to Exchange 2013 to different server but first I need to update it. I managed to update from SP1 to SP2 without any major problems but now I'm trying to update form SP2 to SP3.
Update fails when it goes to Client access role phase. In ExchangeSetup log I have following error messages:
[07.03.2014 07:39:27.0982] [2] Active Directory session settings for 'precompile-ManagedBinary' are: View Entire Forest: 'True', Configuration Domain Controller: 'MASTER.domain.local', Preferred Global Catalog: 'MASTER.domain.local', Preferred Domain Controllers: '{ MASTER.domain.local }'
[07.03.2014 07:39:27.0982] [2] Beginning processing precompile-ManagedBinary -BinaryName:'C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe'
[07.03.2014 07:39:27.0982] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe with arguments: install "C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe" /queue /nologo /verbose
[07.03.2014 07:39:28.0247] [2] Process standard output: Installing assembly C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
[07.03.2014 07:39:28.0263] [2] Process standard error:
[07.03.2014 07:39:28.0263] [2] Process standard error: Retry(1/3): exception: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code -1.
[07.03.2014 07:39:29.0292] [2] Process standard output: Installing assembly C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
[07.03.2014 07:39:29.0292] [2] Process standard error:
[07.03.2014 07:39:29.0292] [2] Process standard error: Retry(2/3): exception: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code -1.
[07.03.2014 07:39:30.0322] [2] Process standard output: Installing assembly C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
[07.03.2014 07:39:30.0322] [2] Process standard error:
[07.03.2014 07:39:30.0322] [2] Process standard error: Retry(3/3): exception: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code -1.
[07.03.2014 07:39:31.0367] [2] Process standard output: Installing assembly C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
[07.03.2014 07:39:31.0367] [2] Process standard error:
[07.03.2014 07:39:31.0367] [2] [ERROR] Unexpected Error
[07.03.2014 07:39:31.0367] [2] [ERROR] Process execution failed with exit code -1.
[07.03.2014 07:39:31.0367] [2] Ending processing precompile-ManagedBinary
[07.03.2014 07:39:31.0367] [1] The following 1 error(s) occurred during task execution:
[07.03.2014 07:39:31.0367] [1] 0. ErrorRecord: Process execution failed with exit code -1.
[07.03.2014 07:39:31.0367] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code -1.
[07.03.2014 07:39:31.0367] [1] [ERROR] The following error was generated when "$error.Clear();
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.exchange.addressbook.service.exe");
precompile-ManagedBinary -BinaryName $fullPath;
" was run: "Process execution failed with exit code -1.".
[07.03.2014 07:39:31.0367] [1] [ERROR] Process execution failed with exit code -1.
[07.03.2014 07:39:31.0367] [1] [ERROR-REFERENCE] Id=AddressBookComponent___6f3e1aaa7a2d468a9f3e83382ec479b2 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[07.03.2014 07:39:31.0383] [1] Setup is stopping now because of one or more critical errors.
[07.03.2014 07:39:31.0383] [1] Finished executing component tasks.
[07.03.2014 07:39:31.0383] [1] Ending processing Install-ClientAccessRole
I have tried couple of times and rebooted the server without success. Any help?
Thank you.

Hi,
I'm running SBS2011 and was not able to use ExBPA.
I ended to create new domain + exchange to my enviroment since I had backed up data from server previously.
Thank you

AutoDiscover not working after Exchange 2010 SP2 - SP3 update.

Hi Everyone,
I'm sorry if this is a really simple thing, but i've played around for hours and exhausted google.
I run a 2010 exchange server for everyone at the office, and today I updated from 2010 SP2 to SP3.
The problem I have is auto discover no longer accepts anyones username or password. If you set the account up on the client machine by manually entering the details everything works great.
All the DNS records are correct and have been working for 2+ years. I have recreated the Autodiscovery virtual directory in EMC.
If i manually browse to mydomain/Autodiscover/Autodiscover.xml, when asked for a username and password it says it incorrect. I can then log in to OWA with the same credentials and it works.
Thanks,
Garrett
The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URL https://mydomaincom.au:443/Autodiscover/Autodiscover.xml for user mydomain.com.au.
The Microsoft Connectivity Analyzer failed to obtain an Autodiscover XML response.
Additional Details
An HTTP 401 Unauthorized response was received from the remote Unknown server. This is usually the result of an incorrect username or password. If you are attempting to log onto an Office 365 service, ensure you are using your full User Principal Name (UPN).
HTTP Response Headers:
Transfer-Encoding: chunked
Connection: keep-alive
Content-Type: text/html
Date: Wed, 22 Apr 2015 00:44:51 GMT
Set-Cookie: __cfduid=dc0261b4643b5dbe27f750bbc28bfef7c1429663490; expires=Thu, 21-Apr-16 00:44:50 GMT; path=/; domain=.macarthurcs.com.au; HttpOnly
Server: cloudflare-nginx
WWW-Authenticate: Negotiate,NTLM,Basic realm="mydomain.com.au"
X-Powered-By: ASP.NET
CF-RAY: 1dad4d701ae911c5-SJC
Elapsed Time: 3357 ms.
Attempting to test potential Autodiscover URL https://autodiscover.mydomain.com.au:443/Autodiscover/Autodiscover.xml
Testing of this potential Autodiscover URL failed.

Hi,
Based on my knowledge, the above issue is caused by the loopback check being enabled. Please follow the steps below to disable loopback on the CAS servers:
1. Run regedit, in Registry Editor, locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
2. Right-click Lsa, point to New, and then click DWORD Value.
3. Type DisableLoopbackCheck, and then press ENTER.
4. Right-click DisableLoopbackCheck, and then click Modify.
5. In the Value data box, type 1, and then click OK.
6. Quit Registry Editor, and then restart your computer.
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support

Outlook 2010 SP1 Profile Does Not Update After Moving Mailbox Between Exchange 2010 SP2 Sites

I am working on a large mailbox migration from one AD site to another.
Exchange version at both sites:Exchange 2010 SP2
Two Mailbox Servers: MBX01 in site A / MBX02 in site B
(There is a DAG but keeping this simple)
Two CAS Arrays: CASA.domain.com / CASB.domain.com
The RPCClientAccessServer property is set accordingly. Where MBX01 is set to CASA.domain.com and MBX02 is set to CASB.domain.com
Clients:Outlook 2010 SP1
Scenario: I successfully move a mailbox from Site A to Site B. The Outlook client does not automatically update its server settings to point to the new cas array (CASB.domain.com) and continues to connect to the old CAS server (CASA.domain.com).
I have seen a few articles regarding this pointing to workarounds such as:
- repairing the outlook profile on the client
- delete the existing outlook profile
- run a script to update the prf file (re-cache's email at the client)
I am interested in knowing if anyone else has experienced this, what their solution was for a large migration and if any roll-ups or service packs have possibly fixed this problem.
I would also like to know if you have seen this affect ActiveSync devices. I am getting mixed results in my tests and thought it may be contributed toward different device types, mobile os versions, etc...
I have posted this to the Exchange 2010 forum as well, just wasn't sure where to start.
Thanks.
Mike

Hi,
Seems you got several replies in the thread below that you posted in Exchange forum:
http://social.technet.microsoft.com/Forums/exchange/en-US/68ae67c1-59f5-44bb-aadc-0aea3f72ad2d/outlook-profile-not-updated-to-new-cas-array-after-mailbox-move-between-sites?forum=exchange2010#68ae67c1-59f5-44bb-aadc-0aea3f72ad2d
Please come back to the thread above and check if the replies are helpful.
Since this issue is more related to Exchange, we can provide rarely assistance on this problem. If you need any help on Outlook client side, please don't hesitate to let me know.
I would appreciate it if you could post the solution here when you found it, so that other community members who have same question in this forum will benefit from it.
Best Regards,
Steve Fan
TechNet Community Support

Migrating a mailbox cross forest from exchange 2013 Sp1 to exchange 2010 SP2 Update rollup 8

I can migrate a mailbox fine from exchange 2010 sp2 update rollup 8 to exchange 2013 sp1 or Cu2.
I was testing today migrating cross forest from 2010 sp2 udpate rollup 8 back to exchange 2010 sp2 but I get the below error. Is this even possible? I cannot find any documentation on this scenario yet.
VERBOSE: [21:52:47.622 GMT] New-MoveRequest : The remote server doesn't support client 'casservername.domain.com'
version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
VERBOSE: [21:52:47.637 GMT] New-MoveRequest : Admin Audit Log: Entered Handler:OnComplete.
The remote server doesn't support client 'casservername.domain.com' version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemotePermanentException
+ FullyQualifiedErrorId : 782D22F0,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest

Hi Steve,
I'm a little confused what you are saying. Here is my understanding:
When you migrate mailboxes from Exchange 2013 back to Exchange 2007, the above error occurs.
If I have misunderstood your concern, please let me know.
For migrating mailboxes back to Exchange 2007, there is a simple and straightforward method. Please use the New-MailboxExportRequest cmdlet to convert all mailboxes into pst files. And then use the Import-Mailbox cmdlet to import all pst files into Exchange
2007.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Exchange 2010 Sp2 update rollup 7 fails with error code 80070643 on Sbs 2011

Hello Everyone,
When i trie to install rollup 7 voor exchange 2010 sp2 (sbs 2011) it gives me error code 80070643. I cannot find much to solve this problem. Update rollup 8 installs fine. I've read on internet that every rollup must be installed to succesfully install exchange
2010 sp3. Can anyone help me with this error?

I just installed exchange 2010 sp3, but it does not finish. It stops at 'client access role'
This is in the log;
[10-08-2014 21:55:24.0121] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'server.company.com', Preferred Global Catalog: 'server.company.com', Preferred Domain Controllers:
'{ server.company.com }'
[10-08-2014 21:55:24.0121] [2] Beginning processing Start-SetupProcess -Name:'iisreset' -Args:'/noforce /timeout:120'
[10-08-2014 21:55:24.0137] [2] Starting: iisreset with arguments: /noforce /timeout:120
[10-08-2014 21:55:31.0640] [2] Process standard output: Attempting stop...
Internet services successfully stopped
Attempting start...
Restart attempt failed.
The IIS Admin Service or the World Wide Web Publishing Service, or a service dependent on them failed to start. The service, or dependent services, may had an error during its startup or may be disabled.
Process standard error:
[10-08-2014 21:55:31.0640] [2] [ERROR] Unexpected Error
[10-08-2014 21:55:31.0640] [2] [ERROR] Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [2] Ending processing Start-SetupProcess
[10-08-2014 21:55:31.0640] [1] The following 1 error(s) occurred during task execution:
[10-08-2014 21:55:31.0640] [1] 0. ErrorRecord: Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] [ERROR] The following error was generated when "$error.Clear();
Start-SetupProcess -Name "iisreset" -Args "/noforce /timeout:120"
" was run: "Process execution failed with exit code 1062.".
[10-08-2014 21:55:31.0640] [1] [ERROR] Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] [ERROR-REFERENCE] Id=ClientAccessServiceControl___ef7fa14362774cd9af8882d6287b640a Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[10-08-2014 21:55:31.0640] [1] Setup is stopping now because of one or more critical errors.
[10-08-2014 21:55:31.0640] [1] Finished executing component tasks.
[10-08-2014 21:55:31.0672] [1] Ending processing Install-ClientAccessRole
Anyone has any ideas?

Exchange 2010 SP2, Update Rollup 7

Our setup before we applied Rollup 7:
Exchange 2010, SP2 Update Rollup 6 running on all servers.
2 Mailbox servers w/ DAG
3 CAS/HUB Servers using a hardware load balancer
No problems prior to the Rollup 7 installation.
The Rollup went fine on 4 out of the 5 Exchange Servers. On the 5th server, however, there are problems. The first time I tried to install RU7 it was about 5 hours in when I cancelled it. So I tried again and the install has been running for 13
hours and it appears to be only about 40% complete. The progress bar has been stuck in the same spot for nearly all of that time. Per an article I found on Susan Bradley site (SBS Diva) I had verified that "Check for publisher's certificate revocation"
was disabled in IE prior to the start of the install.
I have seen Service Packs take a long time in the past and I have Rollup Updates take a long time too, but this is taking a very long time.
Anyone else observing this issue with this latest Update Rollup for Exch10, SP2?
Thanks.

Hi,
When I try to install Exchange 2010 SP3 roll up 7, am getting the below error:
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may
be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
and please find below event log:
Product: Microsoft Exchange Server - Update '{A93DA06F-A5B8-4DF8-8B3F-B285E014C659}' could not be installed. Error code 1642. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the following link for instructions
on turning on logging support.
Can you please help me with this error.
Thanks

Upgrade Exchange 2010 SP2 to SP3 getting fail

Hi,
I am trying to upgrade from exchange 2010 SP2 to SP3, but it getting failed.
I have already run the prepare schema, prepare and domain prep in all domains and it got replicated in DR Domain controllers.
But, still i am not able to upgrade the server. The error says,
Preparing Exchange Setup
    Copying Setup Files                           COMPLETED
The following server roles will be upgraded
Languages
Hub Transport Role
Client Access Role
Management Tools
Performing Microsoft Exchange Server Prerequisite Check
    Configuring Prerequisites                                 COMPLETED
    Organization Checks
FAILED
     Setup needs to contact the Active Directory schema master but this computer
is not in the same Active Directory site as the schema master (Default-First-Si
te-Name).
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
    Language Pack Checks
COMPLETED
    Hub Transport Role Checks                                 FAILED
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
    Client Access Role Checks                                 FAILED
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
Exchange Server setup encountered an error.
Thanks,
San

Hi,
Schema updates should be done on a schema master or on a DC in the same AD site as the schema master. Once extended, the updates will replicated via AD replication. To narrow down the issue, I recommend you check if there is any event related to replication
on domain controller holding schema master role.
Is the schema master role in the same site as the Exchange server which you want to upgrade? If not, you can try to transfer FSMO role to a domain controller which is in the site where you want to install Exchange 2010 SP3 and then upgrade to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Applying Windows 2008 R2 SP1 on Exchange 2010 SP2 servers

Hi All,
Our current setup is Primary Site and DR site with a DAG.
Primary site is having 2 Mailbox servers, 2 hubcas servers with an NLB and one CAS server for OWA.
DR Site is having 1 mailbox server, one hubcas server and one CAS server. All these exchange servers are SP2 with update roll up5.
But the OS is Windows 2008 R2, need to apply Windows 2008 R2 SP1 on these servers, and what are things to be considered.
Does this affect CAS servers IIS?
Thanks,
Kanishka.

Agreed. One thing to mention - Win 2008 R2 needed SP1 a while back, no security updates have been released for a while.
Exchange 2010 SP2 goes out of support next month. please plan to update to SP3 for Exchange 2010.
http://blogs.technet.com/b/rmilne/archive/2013/10/08/save-the-date-end-of-exchange-2003-support-t-minus-6-months.aspx
The details for that, and a link to the lifecycle page are in the above post.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Error 1603 when installing Rollup 4 for Exchange 2010 SP2

Hi There,
I have began upgrading our Exchange servers to Rollup 4 for Exchange 2010 SP2 last week and the first 3 servers all successfully installed it without any problems. However I have hit a problem with my 4th server.
I am receiving the 'common' error 1603 in my Application log and I have already ran through many potential fixes to this problem on various posts on this and other forums, but to no avail.
I have tried the following without success:
Turning off UAC
Running from elevated CMD prompt
Running from elevated Powershell command
Removing and re-adding "Exchange Trusted Subsystem" from the Administrators group
Re-downloading the RU4 install package to the local disk on the server
Adding more RAM and CPU resources
I have watched the installation process and it seems to update of the native assembly files and comes to the "Starting Services" process, with which it appears to do fine as I have watched the Services starting within Server Manager while this has been running,
but then all of a sudden just begins "Rolling back actions".
The only difference with this server to the others is the fact that a colleague of mine had to recover this server within the last 6 months and ran the Setup /m:RecoverServer command
to do so, could this have anything to do with it?
I have installed Exchange 2010 Service Pack 2 on this server since the recovery though.
I am running out of ideas so any help would be greatly appreciated.

skippy-85,
Any updates on this Issues?
In case if the issue stands
resolved, Please mark Solution for this Thread and close this.
In case if you still have
the issue with the RU4 installation do let us know!
Thanks
Exchangeexperts.in ~ ( Exchange | 2003/2007/2010/E15(2013)) ~Mark this if Helpful~ This Information is provided "AS IS" and confers no Rights!!

Exchange 2010 Sp2 - Does not audit Shared calender access

I have Exchange 2010 sp2 , I have enabled mailbox audit on few mailbox , as well as MSExchange IS logs for logon event to expert.(event ID 1016),
I am trying to get folderbind events , from shared calender access , like Non-owner mailbox event or anything that I can run audit get the detail if non-owner accessed the calender or mailbox folder etc..
I found changes are logged like create , delete or any changes but not folderbind
i have following on to few mailboxes.
AuditEnabled : True
AuditLogAgeLimit : 90.00:00:00
AuditAdmin : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, FolderBind, SendAs, SendOnBehalf, Create}
AuditDelegate : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, FolderBind, SendAs, SendOnBehalf, Create}
AuditOwner : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, Create}
Can some one please help me to find what is missing to get folderbind audit events when any non-owner access anything like shared calender etc..
Thank you

Hi ANdy,
Yes we have the followed the same commands as mentioned in both the article and the PPT as well. But i got the errors as mentioned in my thread above.
Databases were not getting mounted, even when i tried the resume command still it failed.
regards
abubakar
Md.Abubakar Noorani IT Systems Engineer Serco Ltd.
Ok, because that is the part I wasnt clear about. I assume that the servers in the DR site are not set for automatic activation, so in order for them to mount, you would have to clear that block.
When you tried to move the databases to the DR site, you got the same error message as you got when you ran the restore-databaseavailibilitygroup command?
So, is everything back to normal? Did you run test-replicationhealth before you failed over?
Also, anything of use in the cluster logs? “cluster log /g”.
I assume the MAPI bindings and NICS are set correctly since this worked before.
Twitter!:

Exchange 2010 SP2 RU2 - Client Issues

Hi,
I'm using Exchange 2010 SP2 RU2, Clinet Using Microsoft Office Professional Plus 2010,
facing some problem at some client side,
Problem 1. Unable to Create Subfolder in outlook and OWA
              2. User able to sent mail but its showing in both folder Outbox and Sent Item
              3. If recipient decline and propose new time for meeting, organizer unable to see new proposed time,
                  he has to reopen mail again then new time sync.
Action Taken 1. Create new Profile
                     2. Checked in OWA
                     3. Change the PC
                     4. Repair the MailBox
                     5. Moved the Mailbox to different DataBase
                     6. Permissions are ok ..etc....
Looking for Solution with reasons,
Thanks in Advance.
Hassan
Hassan Technet

Exactly. Break this down into discrete items.
Also what build of Outlook? Is that patched?
http://blogs.technet.com/b/rmilne/archive/2013/07/18/patching-exchange-don-t-overlook-outlook.aspx
And While Exchange 2010 SP2 is supported, you are well behind where I would like to see you. For a start you are missing several security updates in Exchange that can only be resolved by installing a newer RU
http://blogs.technet.com/b/rmilne/archive/2013/12/10/exchange-security-update-available-for-ms13-105.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Rollup 8 for Exchange 2010 SP2 causes EWS error with bad parameter for Exchange.MailboxReplicationService.ProxyService

When I installed Rollup 8 for Exchange 2010 SP2 it caused an error in EWS
EWS failed with the error:
exchange web service could not load file or assembly Exchange.MailboxReplicationService.ProxyService bad parameter
When I uninstalled the rollup all worked fine again.
Any ideas, Thanks in advance?

Hi,
To apply this update rollup, you must have Exchange Server 2010 SP2 installed. And remove all interim updates for Exchange Server 2010 SP2 before you apply this update rollup. Please check your installation deployment by the following article:
Install the Latest Update Rollup for Exchange 2010
http://technet.microsoft.com/en-us/library/ff637981.aspx
Description of Update Rollup 8 for Exchange Server 2010 Service Pack 2
http://support.microsoft.com/kb/2903903/en-us
If all requirements and preparations are configured properly, please collect your error logs to check your installation. It would be helpful to post some event logs here for further analysis.
Thanks,
Winnie Liang
TechNet Community Support

Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MD

Hi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support

Unity 5.0 compatibility with Exchange 2010 SP2?

Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

Updating Exchange 2010 SP2 to SP3UR9

Similar Messages

Maybe you are looking for