Updating Existing Programmes- P6

I have a programme that needs to be updated on a monthly basis by importing 2 different programmes from 2 different contractors. Activity IDs all match, though every time I try to import the programmes the WBS seems to screw up. I've tried importing whilst not updating the WBS, but then I get no programme updates. I've tried with keep existing and update existing WBS, but these seem options muck up the WBS, but do provide the required updates. Is anyone doing anything similar that they can advise on what settings I can use to make this work?
Thanks in advance

there are quite a few different approaches considering different limitations such as:
- licensing (number of Beneficiary / General Contractor / Subcontractor users)
- hardware, networking, security, mobility, etc for decision between web vs. desktop client application
- project complexity, subcontractor scope, confidentiality issues related to project and global data permissions
depending on your particular project needs, you should consider your options:
- xer (or other transfer files) import/export vs. providing subcontractors with web and/or desktop client application access to a centralised database for planning and updating
- subcontractor users with limited or no global privileges, full or limited project data access, limited resource pool access (low-level node within RBS), linked to low level OBS (responsible for project or project WBS levels)
- use multiple projects within EPS vs. multiple WBS elements within project.
coming back to your problem (the difference in scope between subcontractor sub-project and master project):
- must you use xer's?
- if so, can you export the entire project to xer for subcontractors to update? is not confidentiality an issue?
- if so, is it feasable to break your project (program) into several projects within same EPS? import/export, update separately or
you can use "buffer" projects (one for each xer) for importing and validating the update data for the separate sub-projects (updated subcontractor projects).
proper projects or reflections can be used for that matter. recombining the sub-projects into the master project would still have to be done manually.
regards,

Similar Messages

Downloading the latest iTunes software to my PC without getting an error message and losing access to my existing programme. anyone else getting this problem?

I get the message that the latest software version is available, when I download it I get an error message and lose access to my existing programme. The only way I can use iTunes again is to restore my PC to before the download. Any ideas out there?

See Troubleshooting issues with iTunes for Windows updates.
tt2

While updating a programme,it shows installing but it is not doing.

While updating a programme,it shows installing but it is not doing.

Try rebooting the ipad by pressing and holding the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go.
May work for you

How to add new row and update existing rows at a time form the upload file

hi
How to add new row and update existing rows at a time form the upload file
example:ztable(existing table)
bcent                      smh            nsmh         valid date
0001112465      7.4                       26.06.2007
0001112466      7.5                       26.06.2007
000111801                      7.6                       26.06.2007
1982                      7.8                       26.06.2007
Flat file structure
bcent                       nsmh         valid date
0001112465     7.8     26.06.2007 ( update into above table in nsmh)
0001112466     7.9     26.06.2007 ( update into above table in nsmh)
000111801                     7.6      26.06.2007 ( update into above table in nsmh
1985                      11              26.06.2007   new row it should insert in table
thanks,
Sivagopal R

Hi,
First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
Then :
Loop at it.
*insert or modify as per your requirement.
Endloop.
Regards,
Srilatha.

"Quicktime Buffer Overrun Detected" When Updating Existing Software

So the subject line basically says it all. Quicktime runs fine until I pull down the "help" menu and select "Update Existing Software" which immediately gives me a C++ error "Quicktime Buffer Overrun Detected." I've tried repairing Quicktime and it does the same thing still. I'm running v.1.3.7 and Windows XP.
An interesting side note: When Quicktime is running my desktop flashes as though windows is refreshing it. Any idea what that's about?

Bumped. A little help would be appreciated...

How to only update existing records when loading master data ?

Hello experts, I need your lights one more time.
Here is my need :
I have created an infoobject (IO) which is a very simple version of 0material, let's call it Znewmat --> Znewmat has material type and trademark as attributes, those two fields are available in 2 different datasources :
- 0MATERIAL_ATTR for material type (field MTART)
- 0MAT_SALES_ATTR for trademark (field MVGR2)
When loading my new IO from 0MATERIAL_ATTR I use a filter (at DTP level) to get only a few material types (I get something like 1000 records),
here is my issue : when I load from 0MAT_SALES_ATTR the field "material type" is not available to keep the same filter as for 0MATERIAL_ATTR and existing records are updated with the trademark, but I also get 5000 records I don't need, and my master data is "polluated" with useless lines.
*and my question : is there a way while performing the second loading to ONLY UPDATE EXISTING RECORDS AND NOT ADD ANY
NEW RECORDS ? (i didn't find anything in main options of my DTP)*
(I'd like to avoid the solution to update the 0MAT_SALES_ATTR datasource to add the missing field)
Thanks in advance for any help, points will be distributed.
Guillaume P.
Still no idea ?

in the start routine of transformation from 0MAT_SALES_ATTR to znewmat do the following:
select materials from /BIC/PZNEWMAT into i_mat
for all entries in source_package where material eq source_package-material.
loop at source_package.
p_ind = sy-tabix.
read table i_mat with key material = source_package-material.
if sy-subrc ne 0.
delete i_mat index p_ind.
endif.
this way you'll only update records that have previously been loaded by 0MATERIAL_ATTR DS
loading sequence:
first load ZNEWMAT from 0MATERIAL_ATTR. then activate ZNEWMAT. then load 0MAT_SALES_ATTR to ZNEWMAT.
M.

(Administration - Marketing - Import), you can set a parameter value "Import mode" for what to do in case of duplication as "update existing records", "Import new records". The final report of this import is presented as a text file that can be viewed in

Administration - Marketing -> Import, you can set a parameter value "Import mode" for what to do in case of duplication as "update existing records", "Import new records". The final report of this import is presented as a text file that can be viewed in Business Administration - Marketing -> Import -> Exceptions. Whatever the exception, including duplication import occurs during import and recorded in a text file. What are the fields that determine the duplicity? How I can I can change those?

You will be returned anything that is in the option's value parameter. What is displayed in the dropdown and what is put in the value attribute do NOT need to be the same, so maybe you should start there.

Availability Check Changed on the Material Master Update Existing Orders

I need to know if there is a way to update existing orders once changes have been made to the material. Currently the only way that I know of is to go into individual orders change the plant save then change it back to the original plant on the order then the changes take effect. How can I achieve this without touching every order individually. Is there something to mass update existing orders to take a new snapshot of the material master settings for a material.

Try with t.code VA05 - Open sales order list.
Execute this list. In the output, sort the data by plant. Then go to menu Edit -> mass change -> new plant. Change the plant for group of sales orders that have similar plants. Then again do the same thing to bring the previous plant in the sales orders.
This can help reduce the time instead of going one by one.
Regards,

Error when executing an interface: Update Existing Errors

Hi Everybody,
It has been a while since I last wrote into the forum! And this time I am contacting you all, because I have gotten an error and I really do not know where the issue is right.
I am creating an interface, to pass data from one Oracle table to another.
I have created it, and executed the interface! So far so good, BUT then something happens!
I do get an error in a step called:
27 Integration - <MY_BEAUTIFUL_INTERFACE> - Update Existing Errors
I do recon that the error is on the update part, as it is not bringing anything on the set part! Should I modify something on my Interface! Yes I must, but really do not know what!!! I was thinking on playing with the execution modes, which I have already tried, but do not know quite well what to do next!
I do really appreciate your help and guidance, once more!!
Best regards.
P.S.: Please do not hesitate to contact me, if any further details are required.
Looking at the errors I got on the description tab:
/* DETECTION_STRATEGY = NOT_EXISTS */
update     <DB_INSTANCE>.<MY_BEAUTIFUL_TABLE_T> T
set      (
     ) =
          select
          from     <DB_INSTANCE>.I$_<MY_BEAUTIFUL_TABLE_T> S
          where     T.<FIELD_A>     =S.<FIELD_A>
          and     T.<FIELD_B>     =S.<FIELD_B>
          and     T.<FIELD_C>     =S.LRP_CLASS_ID
where     (<FIELD_A>, <FIELD_B>, LRP_CLASS_ID)
     in     (
          select     <FIELD_A>,
               <FIELD_B>,
               LRP_CLASS_ID
          from     <DB_INSTANCE>.I$_<MY_BEAUTIFUL_TABLE_T>
          where     IND_UPDATE = 'U'
          )

J_ORCL wrote:
Well I am on the diagram tab, over my target datastore, and over the colums, but please apoligize me, but i am finding this option that you are telling me!
Once I click onto the column, a new window opens, but it is a mapping one, not a properties one. Is this the one you are mentioning?
Once you click onto any column you will find the following section ( on the same page )
Mapping
Executed On
Update
Target column
Data type
What I am interested in the Update panel .

Trying to update existing apps; will only prompt me for an old iTunes account that does not exist any more

How do I get a prompt for my new account when updating existing apps? I had used one of my sons account for most of the apps on my iPhone. I have since move up to a iPhone 4S and created my own account to use iCloud. But everytime I try to update the exiting apps I am prompted for a password to my sons account. I am logged on to iCloud with my new account at the same time.
It looks like the apps retain some kind of tag to the original account used during download.
Any help would be appreciated.

Change the account in the iPhones settings

Since I recently installed pages on my iPad when I try to edit a file on my mac it requires me to update the programme however when I search for updates none seem to be available.

Since I recently installed pages on my iPad when I try to edit a file on my mac it requires me to update the programme however when I search for updates none seem to be available.

What version are you using?
The latest version of Pages('09) is 4.3
http://support.apple.com/kb/DL1563

Updating existing fields in ODS

Experts,
I would like to update existing fields in the ODS after doing some calculations if a new record that is being loaded meet a certain condition. In turn I would want to update the record being loaded with a value from the record in the ODS just updated. Can someone tell me a way without having to resort to writing a separate code in ABAP to do this in the transfer routines. Also if you could provide example code for such a routine.

Hello Rue,
Your code in start routine should look like this
DATA: it_tab like <active table of ODS> occurs 0 with header line.
select * from <active table of ODS>
        into corresponding fields of table it_tab.
loop at DATA_PACKAGE.
read table it_tab with key <field> = DATA_PACKAGE-<field>.
if sy-subrc eq 0.
    <logic for processing data>.
endif.
endloop.
If you need assistance in code for logic for processing data, please post the logic.
Hope it helps.
Regards,
Praveen

Updating existing AR transactions

Hello, is there an Oracle suggested API/interface that can update existing AR transactions? Most preferably in R12.
Thanks!

All APIs are documented at https://etrm.oracle.com - this requires a valid MOS login account.
In addition, APIs that interface with external systems are documented in the "Integration Repository" responsibility of your R12 instance.
More information may be available in the Receivables guides for your release at http://www.oracle.com/technology/documentation/applications.html
HTH
Srini

Quicktime 7.4.1 crash when telling it to update existing software

The problem first appeared after installing Curious World Maps on this computer. World Maps installs Quicktime 7.1 as a way to utilize the file codecs that are included in quictime. In that program, I would render with the format quicktime and when I would try to define which Quicktime codec to use, the system would crash. At first I thought is was World maps so I reinstalled several times with the same results. I then unistalled Quick Time and reinstalled the same version Quicktime 7.1 with the same results. At this point I opened Quictime by itself. It will play animations fine but when I tell it to Update existing Software, it crashes. There is no number error. I've since uninstalled and installed 7.4.1 and have the same results. When going to Update existing software the Quicktime crashes.
A note about my system. it was shipped to me with Windows Vista but World Maps is not tested for Vista so I had to downgrade to Windows XP. I've run all updates for Windows XP and am fully up to date with the latest service pack.

Quicktime would crash when ever I selected update existing software too. I discovered that months ago and forgot about that error. I started doing a search again for a solution and found myself at a forum talking about this problem. The forum suggested going into Edit->Preferences->Quicktime Preferences->Advanced->and checking the bullet that says safe mode from Directx mode. They were discussing a possible problem with nvidia video cards. I tried that and it did not work for me. **But I then randomly gave this a try**. At the same place I increased my cache to half of max. and I check the box for Media Encoding to enable encoding using legacy codexs and hit apply. Miraculousy it fixed the update crashing for me. I didn't try to narrow down the one that fixed it but give this a try. Like I said this is a known problem and I forget what quicktime upgrade I first noticed this problem at. Now it checks for updates and says my software it up to date. No crashing and closing Quicktime.

TS1702 iPad 2 will not download new or update existing apps

Ipad2 will not download new or update existing apps from the app store

Try update using iTune (computer) and sync to iPad.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/47e895d853a70f226f0 e254ed8bca59f.jpg

Updating Existing Programmes- P6

Similar Messages

Maybe you are looking for