Updating filter setting in Hottinger HBM software CATMAN from inside LABVIEW

I know how to update CATMAN by itself. Does anybody have an idea how to change filter setting on the fly from inside Labview without having to stop my application and opening CATMAN doing the update then starting Labview back up. 

Hi Hobart,
Could you please describe a bit more as to how you are accessing the instrument or if you're using any drivers from the Instrument Driver Network?
Aashish M
Applications Engineer
National Instruments
http://www.ni.com/support/

Similar Messages

  • IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

    iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

    I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
    I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
    One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
    If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
    I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
    As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
    DU needs to be reading the packages on the HD, not the (now out of date) install disc.
    The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
    http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

  • I wan't update using itunes, i want to make update using my phone, but when check for an update using software update in setting message appear " can't check for update....."?

    i wan't update using itunes, i want to make update using my phone, but when check for an update using software update in setting message appear " can't check for update....."?

    Reboot the device and see if the error happens again. Updating through iTunes is usually optimal, but the file size differs via Software Update on the device and iTunes (50MB vs ~800MB)

  • HT1766 My ipad doesnt have software update at Setting section so how to update iOS 5.

    When i want to download somthing from Apps the system prompt update software which i try to update using setting my update software not in the list so hom i'm to update iOS 5 in my iPad 2

    Settings>General>Software Update is only available in IOS 5 and above.
    If you are using IOS 4, you need to connect to iTune (computer) to update software.
    http://support.apple.com/kb/HT4972

  • HT2404 My iPad has no software update in setting/general

    I need to upgrade my iPad software to ioS 5 to be able to download an app to store pptx files, but my iPad has no software update in setting/general. Is there any solution for it?

    You need to update it from iTunes on a computer and not from the device itself.
    (70687)

  • I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything

    Hi,  I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything. My ipad rebooting every 2 or three minutes

    See Here
    iPad Unable to Update or Restore
    http://support.apple.com/kb/ht4097

  • TS3694 sirmy iphone 3G was not on due to software update and its not resotre previous software and shown as error 1051 kindly resolve my issue as soon as possible

    sir my iphone 3G was not on due to software update and its not resotre previous software and shown as error 1051 kindly resolve my issue as soon as possible

    The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
    If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
    sudo sed -i~ '10,$d' /etc/hosts
    You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
    If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
    That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

  • Am replacing airport extreme with Time Machine and want to upgrade from Tiger to Snow leopard. Am told I should manually back up into T Machine before OS update but set up utility won't allow anything with OS below 10.5 and I'm 10.4.11. What to do?

    Am replacing airport extreme with Time Machine and want to upgrade from Tiger to Snow leopard. Am told I should manually back up into T Machine before OS update but set up utility won't allow anything with OS below 10.5 and I'm 10.4.11. What to do?

    I think you mean you are replacing your Airport Extreme with a Time Capsule. Time Machine is software integrated into OS X 10.5 & 10.6 used to automatically backup a system to an external HD. Time Capsule is an Airport Extreme that has a hard disk integrated into it that can be used for storage or  as a Time Machine backup drive.
    Because you are currently on Tiger 10.4.x you can backup to a external HD using SuperDuper or Carbon Copy Cloner. Having a backup is very wise before doing any major system update. After  you have created the backup and have successfully upgraded to Snow Leopard you can still use the external HD for many things. The strategy I'd recommend is to use the new Time Capsule as your Time Machine backup and then use the external HD as backup using SuperDuper or CCC. Redundant backups is wise because backups can (and do) fail too! In addition both SD and CCC are bootable clones, this is useful in that if your internal HD crashes you can boot from a cloned drive and continue working until the internal HD is replaced.
    Below are some links to some articles from MacWorld, I would recommend reading them where you find a common theme, redundant backups. Backup Plan I, Backup Plan II & Backup Plan III.
    Roger

  • I am trying to do the iOS 7 update on my ipad2 and the software update feature isn't there, help?

    I have an ipad2 and in order to update to iOS 7 I must be able to go to the software update under setting but the feature is not there. My iTunes is also not recognizing my iPad when I connect it so I am unable to go that route either.

    See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1.x
    iPhone 4                                      iOS 7.0.x
    iPhone 4S                                    iOS 7.0.x
    iPhone 5                                      iOS 7.0.x
    iPhone 5c                                     iOS 7.0.x
    iPhone 5s                                     iOS 7.0.x
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1.x
    iPod Touch 5                               iOS 7.0.x
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 7.0.x
    iPad 3                                          iOS 7.0.x
    iPad 4                                          iOS 7.0.x
    iPad Mini                                      iOS 7.0.x
    iPad Air                                        iOS 7.0.x
    =====================================
    Select the method most appropriate for your situation.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • Update Filter

    Looking to run a report, compliance 2, Specific Software Update, to see how many workstations still have Internet Explorer 9.  This report has a field called update Filter.  I've tried typing 'internet explorer 9' in this field but I don't get
    any results.  How do I use the Update Filter?

    You can drill into report "Compliance 6 - Specific software update states <secondary>" to view the count and percentage of computers in each state for the update.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I Just updated to the latest Apple TV software and now have no Movie trailers. Have they done away with Movie trailers?

    I Just updated to the latest Apple TV software and now have no Movie trailers. Have they done away with Movie trailers?

    Many thanks b Noir
    This is a copy of ONEof the keys  in the registry I changed  as told by Apple support today. I also have changed others as instructed by GEAR  software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others  they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so  I downloaded the software and installed again.
    Sorry, just this minute went to insert image  and it is giving me a message saying this sort of content  is not allowed?.
    The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr  SiRem GEARAspiWDN.
    The GEARsoftware info about manually deleting  GEAR drive is from:
    http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
    I hope you can help

  • After an update to firefox I keep getting a warning from my Firewall (McAfee) "Program wants internet access". I have permission set at outgoing for firefox and updates checking off, to check that request is valid so what does it need access for

    After an update to firefox I keep getting a warning from my Firewall (McAfee) "Program wants internet access". I have permission set at outgoing for firefox and updates checking off, to check that request is valid so what does it need access for

    This was not a Firefox update, but a piece of malicious software you have inadvertently downloaded from a site called http://ffftp.co.cc/ which is impersonating Firefox. I discovered this as soon as my Zonealarm requested permission for "Golds" to access the internet. Golds??!! However I couldn't find a file with this name installed on my computer.
    You should delete the file you downloaded and certainly do not allow internet access to any suspicious program. If you have already given permission, scan your PC immediately for any virus, malware, etc. Best of luck.

  • I updated my computer to the new software and now the iPhoto has a circle with a line through it.  When I try to update, it pops up to say "These apps cannot be accepted by your apple id". Then will say "update unavailable with this apple id" how do i fix

    I updated my computer to the new software and now the iPhoto has a circle with a line through it.  When I first try to open it the pop us says: "You can't use this version of the application "iPhoto" with this version of OS X. Version: 9.2.1"  When I try to update, it pops up to say "These apps cannot be accepted by your apple id - These apps were already assigned to another Apple ID and they will be available in that Apple ID's purchases list.  If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the application".  I checked and there is nothing under the "purchases" in my App store.  Then will say "update unavailable with this apple id - This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canceled." Then the third pop up says "We could not complete your request. There was an error in the App Store.  Please try again".  Just want to know how do to fix.

    After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
    b0n0b0
    Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
    Mar 15, 2014 9:05 AM (in response to Terence Devlin)
    Got it! Thanx.  What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

  • Software Update Server, clients report "no new software available"

    I have been running Software Update Service on my 10.5.8 (9L30) Xserve for a short time without any problems, updating about twenty 10.5.8 clients on the local network.
    Recently the clients started reporting "no new software available" when running software update (GUI or command line), but updates were available on the Xserve:
    # defaults write com.apple.SoftwareUpdate CatalogURL http://myserve.mydomain:8088/
    # defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://myserve.mydomain:8088/
    # softwareupdate --list
    Software Update Tool
    Copyright 2002-2007 Apple
    No new software available.
    When pointing the clients back to apple for updates, the update is available:
    # defaults delete /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
    # softwareupdate --list
    Software Update Tool
    Copyright 2002-2007 Apple
    Software Update found the following new or updated software:
    * iTunesX-9.0.1
    iTunes (9.0.1), 87690K [recommended]
    Clients can connect to port 8080 on the server, and the iTunes update has been downloaded to the server and is visible on the file system:
    # "curl -s http://myserve.mydomain:8088/index.sucatalog iTunesX.tar
    http://myserve:8088/content/downloads/05/47/061-7190/xP7dtwZz6YGXLHFHcxVT7CnV6mR dq6RnVY/iTunesX.tar"
    # ls -l /usr/share/swupd/html/content/downloads/05/47/061-7190/xP7dtwZz6YGXLHFHcxVT7CnV 6mRdq6RnVY/iTunesX.tar
    -rw-r--r-- 1 root wheel 54947840 Sep 22 16:20 /usr/share/swupd/html/content/downloads/05/47/061-7190/xP7dtwZz6YGXLHFHcxVT7CnV 6mRdq6RnVY/iTunesX.tar
    The /var/root/Library/Caches/com.apple.SoftwareUpdate/Cache.db is extremely sparse after running the software update against the local Xserve:
    # rm /var/root/Library/Caches/com.apple.SoftwareUpdate/Cache.db
    # softwareupdate --list
    # strings /var/root/Library/Caches/com.apple.SoftwareUpdate/Cache.db | tail
    SQLite format 3
    indexprotoprops_indexcfurl_cache_blobdata
    CREATE INDEX protopropsindex ON cfurlcache_blob_data(entryID)P
    Ytablesqlitesequencesqlitesequence
    CREATE TABLE sqlite_sequence(name,seq)
    [tablecfurlcache_blob_datacfurl_cache_blobdata
    CREATE TABLE cfurlcache_blob_data(entryID INTEGER PRIMARY KEY, response_object BLOB, request_object BLOB,
    receiver_data BLOB, proto_props BLOB, user_info BLOB)u
    indexrequestkey_indexcfurl_cacheresponse
    CREATE INDEX requestkeyindex ON cfurlcache_response(requestkey)r
    indextimestamp_indexcfurl_cacheresponse
    CREATE INDEX timestampindex ON cfurlcache_response(timestamp)
    tablecfurlcache_schema_versioncfurl_cache_schemaversion
    CREATE TABLE cfurlcache_schema_version(schemaversion INTEGER)
    Wtablecfurlcache_responsecfurl_cacheresponse
    CREATE TABLE cfurlcache_response(entryID INTEGER PRIMARY KEY AUTOINCREMENT UNIQUE,
    version INTEGER, hash_value INTEGER, storage_policy INTEGER, request_key TEXT UNIQUE,
    time_stamp NOT NULL DEFAULT CURRENT_TIMESTAMP)G
    indexsqliteautoindex_cfurl_cache_response_1cfurl_cacheresponse
    indexsqliteautoindex_cfurl_cache_response_2cfurl_cacheresponse
    None of the XML data seen in the Cache.db file after running against Apple's update server is present.
    Note, I did multi-home this server fairly recently to add an internal website on a different IP/URL, but I don't think that should have effected the SUS service, which is still available at the original IP/port. I am a Unix/Linux admin by training, so some of the OS X idiosyncrasies are still new to me, and I may not be aware of certain tools/commands that may be helpful in diagnosing this problem.
    Thanks for your help in advance,
    -Tom

    Apologies for responding to my own post, but I believe I have found the issue and am replying with a solution for the benefit of others.
    Upon reviewing my original post, I noticed that the curl request for the index.sucatalog was returning XML contents with URLs defined with only the hostname, not the FQDN, even though the CatalogURL was specified with a FQDN.
    # curl -s http://myhostname.mydomain:8088/index.sucatalog | grep iTunesX.tar
    <string>http://myhostname:8088/content/downloads/05/47/061-7190/xP7dtwZz6YGXLHFHcxVT7CnV 6mRdq6RnVY/iTunesX.tar</string>
    This change in URL may have arisen when multi-homing my Xserve for some reason. In my case, specifying the search domain field on the clients seems to have fixed the problem as the simple hostname in the URLs are now able to resolve without the domain.

  • I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update, it says the latest version is unavailable to the U.S. I can't access photos

    I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?

    stuckoncc wrote:
    I updated the latest version of iOS software on my Macbook Pro
    iOS is on iPhones and iPads.
    Are you using an iPhone or iPad?

Maybe you are looking for