Updating firmware etc. for E1200 router

When I bought my E1200 router my primary (in fact only) computer was a Windows laptop. Since that time I bought a MacBook Pro and have been using that as my primary computer. The Mac is running on the latest OS (Mountain Lion).
I would like to install the latest software to maintain the router on my Mac but I was told several months ago that there was no update available for Mountain Lion. Does anyone know if that has changed, and if so where can I download the appropriate software?
Thank you.

I suggest that you install the cisco connect software to another computer. But you can always manage the router manually by accessing the router interface. If you need to check the wireless settings, you can still do that even if you don't have cisco connect.
Please check the link below how you can access the router interface:
Title: Accessing the router’s web-based setup page using a Mac® computer
Article ID: 15841

Similar Messages

Updating firmware on Westell 327W router

I found a file on Verizon website to manually update the router but it did not work, says that software update failed. I still have version 03.02.01. Does anyone know how to get the latest firmware installed on this router?

Make sure you have the correct version of the firmware update being applied. There are three differnet revisions of the 327w that you could have and you can determine your version from the modem's Web GUI or from the sticker on the bottom of the router. Also when running the upgrade, shut off your Firewall and Anti-virus until it complete in case they are interfering with the upgrade.
See this page: http://www22.verizon.com/Support/Residential/internet/highspeed/troubleshooting/network/firmwareupgr...
Verizon should already be pushing the latest version of the firmware to you but that doesn't seem to be the case (likely though if you were in bridge mode previously).
========
The first to bring me 1Gbps Fiber for $30/m wins!

Updating firmware on multiple wireless router setup

Hi, I'm trying to take over support from a tech who's moved out of the area. There's abut 4 mixed of these wireless routers WRT300N's and WAP54G's in the house. I can see and update the firmware for the router at 192.168.1.1.., the other routers are connected through their network ethernet port. Is there any way via the wireless connection to access the other 3 to update their firmware? It would be great to do it from one location. I don't know what IP the installer set each of these up to.

To update the firmware you must know the IP address of the device, regardless whether you use a wired or wireless link.
You should also never do the update through a wireless link. A firmware update must not be interrupted. If it is interrupted you are likely to have a dead router afterwards. As wireless links tend to be far more unreliable then wired links it is always highly recommended to use wired links for the updates.
I would suggest you do a network scan or ping all IP addresses inside your LAN subnet. Check where you get responses and check the arp cache with "arp -a" to see what MAC addresses are behind those IP addresses. This should help you to find and identify the IP addresses of those other devices. If you cannot find them anywhere inside your LAN subnet it may well be that they have an arbitrary IP address somewhere else. In that case, probably the best option would be to reset the device to factory defaults and then reconfigure them.

Function modules for updating,modifying etc for OM infotypes (1000,1001)

Hi experts,
                 can anybody help me by giving some FM s which will be used to Insert,Update etc for OM infotypes. i need to update HRP1000,HRP1001 AND HRT1222 tables. i tried with 'HR_INFOTYPE_OPERATION' & 'HR_MAINTAIN_MASTERDATA'. but these two FMs require PERNR as parameter. but i do not have here.
regards,
Murthy

Hi Murthy,
Here's a sample code to update IT1000.
DATA wa_1000 TYPE p1000.
populate wa_1000 with updated data.
          CALL FUNCTION 'RH_PNNNN_MAINTAIN'
            EXPORTING
              act_fcode           = 'AEND' " AEND to modify, INSE to insert
              act_otype           = wa_1000-otype
              act_objid           = wa_1000-objid
              act_infty           = '1000'
              act_pnnnn           = wa_1000
              suppress_dialog     = '2' " you can use 0 if you want Dialog mode
            EXCEPTIONS
              infty_not_valid     = 1
              no_plvar            = 2
              object_not_defined = 3
              otype_not_valid     = 4
              no_authority        = 5
              action_rejected     = 6
              no_gdate            = 7
              fcode_not_supported = 8
              OTHERS              = 9.
          IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
Hope that helps,
Hanna

Update firmware on airport extreme router

How can I update firmware on my airport extreme router?

Please checkout the following Apple Support article on the details on how to update your AirPort's firmware.

E1200 Router will not load Instagram/Facebook/ Pinterest on mobile devices

We have a Cisco Linksys E1200 router at home connected to our comcast modem. Everything works great on our home computers and laptops, however on me and my wifes mobile devices (Samsung S5, Moto X) social media apps loads extremely slowly, or not at all. If we connect to other access points in our house or elsewhere it works just fine.
Any idea what is causing this? I set MTU to manual and that did not help.
Thank you

I should have stated, that I power cycled, updated apps, and updated firmware on the E1200 to the latest version. Linksys tech support would not help me because the E1200 is out of the warranty period.

Firmware upgrage for RV042G

My RV042G Gigabit DUAL WAN router currently has Firmware version v4.2.1.02 (Jan 18 2012 14:10:55). There is a new firmware listed for the RV0XX routers, and it lists the RV042G as one of the routers this updated firmware is for, but it also mentions that it is for the Series V3 hardware only. I do not see any mention in the literature for my RV042G Gigabit Dual WAN Router regarding the Series of hardware. Is this router considered to be Series V3 hardware? Is the firmware update version 4.2.2.08 compatibe with the RV042G Gigabit Dual WAN VPM router?
Thanks

Hi Maurice,
4.2.2.08 can be loaded into RV042G.

How important to update Bios,firmware,driver,utility etc for GS70 Stealth PRO?

I want to ask how important to update gpu bios, cpu bios, firmware and etc for my GS70 Stealth pro ?
I never update any of it from February when i purchased this Stealth pro because Im afraid wrong and make my Stealth pro broken.
Thanks for attention and sorry for bad english

um you cannot update anything inside cpu but you can update bios and firmware for touchpad and such but for bios you shall never update it unless you occure any bios issues where it does not behave propertly then you can update bios but other wise you shall not since some people do it and bam they would kill laptop since they accidentely flashed wrong bios for wrong laptop or so thats why bios is risky to update when you dont know how to and that you shall not do it even laptop is runing fine on it's current bios.

Firmware Upgrade for Actiontec GT704WG Rev. B Router

How do I find the firmware upgrade for the Actiontec GT704WG Rev. B Router? Almost everytime I try to get onto the internet, I have to run the troubleshooter because there is no connection and the final diagnosis is that "The default gateway is unavailable." Googled and found that it is due to the need for a firmware update for the router but cannot find one on the internet. Help!!!

Hi Funrunner
You didn't say which version of the firmware you are currently running, however the latest firmware for that router is Version
3.20.3.3.5.0.9.2.14
Thank you,
Peter
Peter_VZ
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

What is the correct firmware update check URL for a Westell VersaLink 327W?

Hi, I was wondering what the correct URL is for the modem to check for updated firmware on the Westell VersaLink 327w. My model is the D90-327W15-06 and its current firmware is 04.04.03
To clarify, I'm looking for the URL that goes in the box at the top of the upgrade page in the router's advanced settings. That link is a screenshot of what my page currently looks like.
Since I first got this modem 2 or 3 years ago, it has never been able to properly check for updates. I've tried changing the URL to point to the Verizon support page for manually downloading the firmware but that doesn't seem to work either. I'm guessing the URL should point to a specific file, possibly an xml or something? I don't remember what the original address in the box was but it didn't work anyway.
I'm pretty sure I am running the latest version (04.04.03) and manually upgrading isn't a problem if a new version comes out but its always bugged me that the built-in check has never worked right for me so I figured I'd ask on here for the heck of it. At the very least I'd like it to be able to check version information even if it can't upgrade automatically.
Does the built-in firmware check work for anyone else using the 327w or similar model? If so, could you kindly copy/paste the URL on your modem's firmware page? Even if you have a different modem, it might help me figure out the right address for my own. Thanks!

#1 Go to http://www.verizon.net/central/vzc.portal?_nfpb=true&_pageLabel=vzc_help_contentDisplay&linkflag=use...
#2 Make sure that use save as.
#3 After you save the file, go into your router's upgrade screen.
#4 Then use the file that you downloaded earlier to upgrade the router..
If you have any questions as how to do this..
#1 Be sure to take screen shots.
#2 And be sure that you use tinypic.com as your image host.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Need help with understanding updates, partitions, firmware etc.

I went to update my QuickTime and in doing so was told to update my OS which included QT updates. Now I'm getting all kinds of messages about partitions, firmware etc. do not understand at all what's going on.

THIS IS MY STEP BY STEP situation with my updates:
I go to the Apple Icon and selected Software Update and it reads I have 2 items:
MacBook EFI Firmware Update 1.2
MacBook SMC Firmware Update 1.4
I select Install and then it state Installs completed successfully.
BUT THEN I recieve and new icon and this message below:
To update the SMC firmware on your MacBook:
Your computer's power cord must be connected and plugged into a working power source, or your battery must be at least 25% charged.
For more information see 'http://support.apple.com/kb/TS3499'.
1. Quit all other open applications.
2. Click Restart in the MacBook SMC Firmware Update window and wait for your computer to restart.
The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.
Important: Do not interrupt the update.
Your computer restarts automatically when the update is completed and opens the MacBook SMC Firmware Update.
3. Click OK. The SMC firmware is now up-to-date.
If these instructions appear on your screen again, the SMC firmware update was not successful. Repeat steps 2 and 3.
I follow the instructions and then I get this: (could get my image to attach but here's what it said)
the first error message heading of:
MacBook SMC Firmware Update 1.4
Your firmware could not be updated, the hard drive partition scheme may not be supported. You must be booted from a GUID partition or RAID scheme.
see http://support.apple.com/kb/HT2434 for more information (internal error 28:3)
THEN ANOTHER ONE POPS UP saying:
Your Hard Drive partition scheme is not supported, you must be booted from a GUID partition scheme.
see http://docs.info.apple.com/article.html? artnum=303609 for more information
I went to those URL and tried to understand what it was telling me but I did not understand. I can't figure, by reading thru forums, etc, if I need to do this or not and what exactly it is.
So back to just pushing a simplet update has thrown all this unknown info. my way and I have no clue what to do.
Thank you. Hope this is more clear.

How do I update the Firmware on the Quantum Router?

So the Quantom router is missing a bunch of features the old action tech router had. Advanced filteringis gone, I am hoping a firmware update would bring it back. I go to look to upgade or check for a firmware update and that isn't there either.
How do I update the Firmware on the Quantum Router?

The current Quantum firmware version is 0.26.29.
Firmware updates are automatically pushed by Verizon. If you have an older version, reboot the router and it should pickup the new version.
Enjoy.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Update Firmware on Linksys Wireless N Router? (WRT150N)

I have noticed there is a newer version of the firmware for my router. Is it necessary to upgrade to the newest firmware? If for some reason it does not work correctly is it easy to reset the modem to the original firmware? If I install it will it erase my current wpa2 pass key?
It is recommended that I update the firmware or should I leave it as it is? Any advice would be appreciated. Thanks
Message Edited by Deluxe8520 on 06-26-2007 11:24 AM

The only times that you need to upgrade firmware is:
1) when a router security issue is fixed, or
2) when a new feature it added to the router that you want to use, or
3) when router is not working, and all other attempts to fix it have failed
So, if your router is working properly, and there are no security fixes, and nothing new in the firmware that you need, then you do not need to upgrade the firmware, and you probably should not do it.
I always look at the firmware "version info" to determine if I want to upgrade to a new firmware. I looked at the info for the WRT150N, and I don't see any security fixes, or new features, so that only leaves item 3 as a possible reason to upgrade.
After a firmware upgrade, you must reset the router to factory defaults. Doing this will wipe out your WPA2 key, and all other settings. After a firmware upgrade and reset to factory defaults, you should set the router up again from scratch. If you saved a router configuration file, DO NOT use it.
You can return to an earlier firmware, using the same procedure as a firmware upgrade, but to do it, you must have a copy of that firmware on your computer. The router's copy of that old firmware will be wiped out when you upgrade, so you cannot depend on the router to keep a copy of the old firmware.

Unable To Repair/Update Firmware for a Creative Nomad Jukebox

Hello all,
I've been trying for the past...3 or 4 hours to get my player to work, but it simply refuses to work =P. I sent the problem into Creative, but haven't gotten a response for a couple days now. So, here's a copy-paste of what I sent in that e-mail. If you can think of anything that might help, please don't hesitate to post! I really need your help on this one!
My player's hard dri've recently died, and I received
a replacement from the original store (a CompUSA).
However, my Firmware for the device has failed. I
tried the firmware upgrade for my Zen, but after
a certain number of tries, I gave up. Here is the
list of steps that I followed.
On Zen: Click "Reload OS", let it run, it says
run the firmware upgrader now.
On Computer: "You cannot install this firmware
update with your player's current drivers using
the SB394 connector. To update your player's
firmware, this application will temporarily
replace the current drivers and restore them after
the installation is complete. Continue
installation?", I click Yes. Then it says to
disconnect, and re-connect. I do it.
It shows my version (.2.0), and I'm upgrading/
repairing it to .2.02. When I click "Upgrade", a
warning message pops up and says:
"Your player cannot start up properly. Please
reboot your player and run this application again.
I've done this at least 0 times, and nothing changes. My player is a Nomad Jukebox Zen, the one with a FireWire connection, and like I said,
I've tried this at least 0 times with the same results. Is there a process to completely remove
the firmware on the device, then reinstall it,
or to roll it back or something? Any other ideas
to fix this problem is needed as well.

Bump.

My iPod touch was stolen and recovered. I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly

My iPod touch was stolen and recovered. I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly appreciate

If the thief enabled activation lock on the device, then there is nothing that can be done. Only the password for the Apple ID that it is locked with can disable activation lock.

Updating firmware etc. for E1200 router

Similar Messages

Maybe you are looking for