Updating FIrmware - No Version number found on router

fixed...
Message Edited by Rodine on 10-13-2009 06:43 PM
(PC Gamer)
Q9550 2.8Ghz
Thermaltake Heatpipe Air CPU cooler
XFX 790i Ultra (3 way SLI capable)
BFG 260 GTX's OC in Two-Way SLI
BFG 1000 Watt PSU
Cooler Master Case
10k rpm sata drive
GSkill PC3 1600 DDR3 4Gb
G15 keyboard
G5 Mouse
Dell 24" Widescreen LCD
Linksys PCI WMP54GX

If you see no version info at the bottom then it is version1...Download the Firmware from here

Similar Messages

  • Keep getting app updates with same version number

    I noticed that I keep getting update notifications in the app section in iTunes from the apps I bought and downloaded for free but they have the same version number. Like just now, I checked for updates and there where about 42! I believe it's for every app that I installed. Why is this?
    André
    Message was edited by: AndreasvanHaren

    Are you getting any error messages? Or just photos of deckchairs?

  • Patch Set Updates and the version number

    Oracle document 854428.1, Patch Set Updates (PSUs) for Oracle Products, has this to say about the version number:
    2.3 Baseline Version for Easier Tracking
    Oracle associates a version number to the patch. The fifth number of the database version is incremented for each PSU. For example, the initial PSU is version 11.1.0.7.1, the second PSU for Release 11.1.0.7 is 11.1.0.7.2, and so on.
    My DBAs just told me that they applied PSU3 to our database, which had version number 11.2.0.2.0. I checked the version number after the PSU was applied, but it is still the same:
    SQL> select version from v$instance;
    VERSION
    11.2.0.2.0
    Do the PSUs change the fifth number in the version or not?

    SQL> select comments from sys.registry$history where action_time > sysdate - 1
    COMMENTS
    PSU 11.2.0.2.3
    Thankyou, that answers my question. The fifth number in the version column of the v$instance view does not seem to change when a PSU is applied. However, the sys.registry$history view has a record of the PSU with the correct fifth number in the version.

  • Lost Version Number for Tiger with recent update?

    I have a VERY odd problem after the most recent Tiger security update. The version number of the OS is MISSING -- it is not there. As a result, Safari, Photoshop, Illustrator and a ton of other applications will not launch, saying that they need at least 10.4 to run. When I go to the About This Mac dialog, there is literally just a blank space where the version number would be. Any way to fix this besides a reinstall?

    I don't know if this is the only file or the critical one, but /system/library/core services/SystemVersion.plist has an OS version number. I warn you though, messing with any system files is tricky and I would definitely back up before doing any editing. I also don't think this is the route to go. Very likely something more is missing as a result of an unsuccessful update and you may end up having to do an archive and install anyway. Have you tried repairing the drive with Disk Utility (the drive, not the permissions)?
    If you're determined to go the editing route I would just try replacing that one file with a copy from your backup (you do have one for just this kind of occurrence, don't you?).

  • Unable to find WRT54G Version Number

    Hi all,
    I want to update my WRT54G firmware and I went to the Linksys site and follow the appropriate instructions to get to the WRT54G firmware download site. They ask for a version number, and they specify where I can find this on router. But the problem is there is no version number on my router where linksys says there is.
    I am not sure what to do. Is there another way to find the version number? Does no version number mean it's a specify version like 1?
    Any help would be good.
    Thanks,
    FCCMessage Edited by FCC on 03-31-200711:27 PM

    Look at the first four characters of the serial number and compare to this link...
    http://en.wikipedia.org/wiki/WRT54G#Known_issues
    but it usually does mean version 1.
    Linksys WRT54G v3.1 (DD-WRT v23 SP2 09/15/06 std)
    Linksys WRT54G v2 (Firmware Version: v2.04.4)
    Message Edited by dallascowboys1 on 03-31-200711:57 PM

  • SWF name and version number for bug reports

    Hi,
    When users report issues we ask for a screen dump , but we would like the course version number and the SWF name to appear in the screen footer.
    We have looked at a number of options, but we are a bit stuck. 
    SWF name
    1/ Pipwerks mentions a Cp variable called cpORGSWFPath 
    "Informational variable. Provides the file name for the project’s main SWF. Appears to duplicate functionality of cpOrgSWFPath.NOTE: This value can only be obtained when the project uses an external skin. " for CP5
    http://pipwerks.com/2010/08/23/complete-list-of-variables-for-adobe-captivate-5/
    Does anyone know how to access this ?
    2/ We could manually enter it in the cpInfoprojecttname field, but it wont change if we update the file
    Version Number
    1/ The Scorm manifest creates a version number. Can I get the information from Scorm ?
    2/ My backup plan is to use fields intended for other purposes
    e.g cpInfoprojecttname, cpInfoDescription
    the following are not used
    - cpInfoCourseId
    - cpInfoCourseName
    http://forums.adobe.com/message/3201125
    rgds Renovator

    That's a recent version of Logic 9 correct?
    The problem centers around a name length limitation in all versions of Logic except 9.1 and upwards (I think it's Logic 9.1)  You've named an audio file with more than 30 (or 31) characters in Logic 9, unfortunately Logic 8 can't read the long name and sees it as a shortened name and a disk sector location.
    #23B269  is the location of the file on the disk and if you would've created the project in 8 including the long name, Logic 8 would've written the file to disk as "heather reco#23B269.wav" and would've been able to find it.
    To be on the safe side, when creating files in Logic 9 for use in 8, keep the file names under 29 characters, including spaces. Re-linking has to be done by hand, load the audio files needed into the bin and drop then in the correct track locations, Logic 8 will not be able to find the files with long names.
    This used to play **** when moving projects, a home studio person finished his CD, unaware he/she uses long file names. Copies all projects and files to an external disk and takes it to a professional studio for mixing. OOPS!! The file names with the sector locations are no longer valid, the sector location has changed... the project loads with scraps of files from different projects or loads with incomplete files.

  • Some buttons without tones after updating firmware...

    Hi.
    After updated firmware to version 20.0.080 (5530 Xpress Music), some tones and vibrates at dialing pad (just numbers) and at Contacts (main screen) don't work any more.
    All other functions work normaly just as described, but some tones and vibrating functions doest'n seem to react. I have set touch screen tones on level 2, also the vibrate on level 2. Tryed to reinstal the latest firmware again, done succesfuly, but no changes.
    Should I try to restore the phone by *#7370# ??? 
    Is anybody facing the same issue ???
    br,

    Hey,
    I have the same problem with my phone. After the update, installing v.20.0.080 the dial tone from the keypad just dissapeared. These morons at Nokia instead of adding letters to the keypad dialer with the new firmware, they went further and removed the dial tone.  Such a progressive step..

  • Updating firmware when I can't get an internet connection through the router

    I am trying to update the firmware for WRT54G V8, but some of the instructions indicate I need to have the router connected and be connected to the internet.  I cannot get an internet connection through the router.  Can I upgrade firmware without being connected to the internet through the router.  (I have had this router for about a year and a half with no problems until now.)

    Yes, you can upgrade the firmware without an Internet connection.
    To upgrade the firmware, first download the new firmware into a computer that you can wire to your router.
    Next, power down your entire network.
    Then wire the computer to a LAN port on the router.
    Disconnect all other wires from the router.
    Power up the router and allow it to fully boot (1-2 minutes).
    Power up your computer.
    Login to the router, and do the firmware upgrade  (it will likely take several minutes).
    Power down your entire network.
    Next you need to reset the router to factory defaults.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is likely dead. Report back with this problem
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. Report back with this problem.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.

  • Westell 9100EM Router Firmware - latest version?

    I have a Westell 9100EM FIOS Router with firmware version 2.01.02.00  .  As far as I know, it's never been updated since the install several years ago since my update setting has been set to "Automatic Update DIsabled" from the pull-down choices in the Advanced Upgrade Firmware section in the Router setup screen. 
    All is working ok, no problems, but I was curious if there was a more recent firmware version available for download & install.
    I found a link here and downloaded the firmware file (haven't tried installing) but I wanted to see if this was the latest version as the version # appears to be an earlier version.
    The downloaded version # is A90-9100EM15-10_1.02.00.04 which would seem, at a glance, to indicate an earlier version # than my existing Router version.
    Has anyone updated the Westell 9100EM firmware recently with the above version?
    Solved!
    Go to Solution.

    viafax999 wrote:
    In the 5 plus years I've had a Westell there has never been a firmware update.
    Thanks for the info. 

  • Version number and updating extension

    I wonder where to set my application version number, I have tried at the bundle manifest but if setting at extension it is not shown anywhere at the extension manager and I don't know how to get this value for an "About" window.
    Therefore I have set the bundle version to match my application number, this way at least the number is visible in the manager.
    Also if I try to install an updated version of my extension the extension manager asks me to delete previous version because it conflicts with this one, I expected that the extension manager would ask if updating; am I doing something the wrong way ?

    Update: this post has the answer for this first part: http://forums.adobe.com/message/4687256#4687256
    The version number that shows up in Adobe Extension Manager is controlled in the .mxi file.
    <macromedia-extension name="com.zaalabs.MyExtension" requires-restart="true" version="1.2.3">
    I haven't found a way yet to pull the version number directly from the MXI file at runtime to show in an about window.  To work around this we actually populate the version number in two places using an ANT script.
    One in MyExtensionVersion.as which gets compiled in and can be looked up at runtime, and then other in the MXI file.
    package
              public class MyExtensionVersion
      // This will be populated from the MyExtensionVersion.as.template
                        public static const VERSION_NUMBER:String = "1.2.3";
    Then in our application we can lookup MyExtensionVersion.VERSION_NUMBER
    Message was edited by: Nate Beck

  • HT1218 3TB Timecapsule version 7.6.4 is CONSTANTLY losing WAN connection.  Comcast is our carrier, and I've ruled out the modem as it downloads at 30mbs consistently.  Want to try and update firmware of Timecapsule, but it will not display an "Update" ico

    3TB Timecapsule version 7.6.4 is CONSTANTLY losing WAN connection.  Comcast is our carrier, and I've ruled out the modem as it downloads at 30mbs consistently. 
    Want to try and update firmware of Timecapsule, but it will not display an "Update" icon.
    Grrrrr.....makes me miss my stupid PC set up as I could force it to do what I want!
    Intermittent connection screws up Netflix, VOIP phone, Amazon, Streaming music via Spotify/Pandora, general internet access.....whole family is ****** off.
    Any tips/tricks/ideas???
    dave

    Downgrade firmware to 7.6.1 .. as the latest is just lousy.
    It is easy to downgrade.. hold down the option key whilst you click the version number. in Macs.. lots of stuff is hidden behind an option key.
    I also strongly recommend a factory reset and use all SMB names.. not apple type names..
    ie TC name.. TCgen4
    Wireless name TCwifi (or give names to both bands.. TC24ghz and TC5ghz).
    That helps all the non-apple part of the world.. connect.
    Also Mavericks has now changed over to SMB as well. So even Mac is now windows networking.
    Generally these two things. .7.6.1 firmware and SMB names will fix it.. if not post again as is another step that is possible.. controlling the WAN speed of the TC.

  • Version number important for Firmware?

    Hi
    I've got a WRT54GL DE-AT v1.1 Router with Firmware Version v4.30.7. I'd like to upgrade to Firmware Version 4.30.9 due to problems with UPnP.
    However the download site states explicitly that the update is for version 1.0.
    Can I use the update without problems?
    thank you in advance
    p.s. Hmm, interesting...according to the Changelog there is no Version v4.30.7.Message Edited by CruelCow on 05-04-200709:30 AM

    Don’t worry go ahead and upgrade the 4.30.9 firmware…

  • Power LED flashes, firmware updates good, and can still access the router

    I have a wrt54G first version as there is no version number. About two months ago, the power led started dropping out and with a reset worked for a day or so, then, it became worse, every hour, and now only a couple of minutes. according to the help side of this site, the router will not be accessible, but it is. I upgraded to the 4.7.1.1 firmware, the problem continues, un plug and start it up. Any ideas? Could it be the 12 volt power supply going bad or over shooting the power?

    yes, that is the level, verified at the router. the help side of this site says that if the led flashes like this that it would be corrupt an un accessible, but a restart of the router stops it, and it is accessible, moreover, the upgrade fails since that is the level at the router. just that it is happening about every 15 minutes (8/3) - could it be that comcast is sending packets of ??? to blow out routers? Thee state they don't like people using routers - that you are not supposed to use more than one computer with their broad band connection. Yes - serious, the e have said this twice in the last 6 months. Don't know what it could be, Saturday - Sunday it has not dropped out at all

  • Having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

    having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

    AirPort Utility in Mountain Lion will not support the older versions of the AirPort Express.....model numbers A1084 and A1088. Check on the side of the Express for the model number.
    In addition, AirPort Utility in Mountain Lion will not support the older "round" or "dome" shaped versions of the AirPort Extreme.
    Can you check to see how your devices might be affected?

  • Nokia n79 updated firmware 32.001 found GPS connec...

    I'm update firmware 32.001 for nokia n79 and gps signals cannot be received.
    The satellite signals usually open between 6-9 after firmware update enabled satellite just 1-2
    Please update the gps section in the next version of firmware   

    Hi, I report a bug in this firware versión. I've n79-3 rm 350 NAM. The problem is cannot acces to menu route when the languague is set in Spanish: Tools > Settings > Applications > ---- (before here appears App Settings or some else). But, when the langague set is English, this option appears
    GPS signal reception: sometimes is take too long lock the GPS signal.
    Attachments:
    CaptPantalla000012.jpg ‏12 KB
    CaptPantalla000013.jpg ‏11 KB
    CaptPantalla000014.jpg ‏9 KB

Maybe you are looking for