Updating firmware on WRK54G using a Mac

Is it possible to update the firmware on a WRK54G using a Mac?

The downloaded .bin file is the firmware file. It is a binary file. It is not supposed to be opened or used on your Mac. You have to upload it to the router which will install this then. Go to http://192.168.1.1/ enter your password (default "admin") and then look for the Firmware Upgrade function on the Administration tab. Please remember to make the firmware upgrade only through a wired connection. A firmware upgrade must not be interrupted under any circumstances. I would recommend to use Firefox instead of Safari to access the web interface and for the upgrade.

Similar Messages

Software Update Failure (Curve 8520) using a Mac

Blackberry Website - http://uk.blackberry.com/software/smartphones/update/smartphone.html
says,
"Update on the web - On a Mac
• You will need to download BlackBerry® Desktop Software to update your smartphone software. Once installed, connect your smartphone to your computer and you will automatically be prompted to update."
- It DOESN'T automatically update
- We have to open BlackBerry Desktop Software file which has Import Media, Device Options buttons on the main screen, as well as Back Up, Restore, Applications and Sync buttons on the Tool Bar
- When we click on Applications, a box comes up with a list of apps (checked and unchecked boxes), Check for Updates, Cancel and Start. buttons If we click on Check for Updates we get "There are no updates available for your BlackBerry device". If we click on Start we get a message which reads:
"BlackBerry® Desktop Software failed to validate your BlackBerry® device update.
Aborting install due to validation failure. Some packages contained unsatisfied dependencies"
We tried to "Reload BBM" which resulted in loss of contacts and lots of tears, so we "Restored". Since doing this contacts have been restored BUT we now cannot connect to WiFi. Message reads, " This wireless router supports WiFi Protected Set-Up. To connect using a PIN (which your Blackberry will generate), click Next'. We are then asked to enter a PIN into the router - How are we supposed to do that if the router doesn't have a keyboard?
HELP!

Hey Ickleman,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Follow the steps in this KB article to resolve the software update failure: www.blackberry.com/btsc/KB29289
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

HT3421 How can use this update if I'm using the MAC OS X 10.7.5?

How can I use this updater if I have already upgraded my MAcbook to the MAC OS X 10.7.5.?
To run the update, it requires:
Mac OS X 10.4.11
Mac OS X 10.5.6

Batteries with this information in the Battery Information section need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110

Linksys srw2048 unable to update firmware via xmodem (using hyperterm)

I have three srw2048 series switches at my new job. One updated fine via the web interface the other two (after I found a windows machine to use the web interface) looked as though they were uploading the new file but after a reboot I was still on the old verison. So I broke out the console cable. What I have done is to Download Software to the switch (option 1) this kicks me over into xmodem. Once I am in xmodem I choose to send a file (the latest rom) using the 1K Xmodem protocol it immediately gives me retries and errors until it reaches a threshold that ends the session. During this whole process zero k is transferred.
Boot Version 1.0.0.04
Software Version 1.0.0.49
Hardware Version 00.03.10
The only thing I can think is that I must need older files to upgrade to an intermediary version before loading the latest 1.22 rom file.

You might want to pose this question in the Linksys forums at http://homecommunity.cisco.com/
Also, try another terminal program like Teraterm Pro. Maybe it needs "classic" xmodem?

G5 single 1.8Ghz 10.4.5 cant update firmware

dear all
trying update firmware G5 single 1,8ghz mac os x 10.4.5
but update cant found system disk
permissions OK
need help

Which G5?
Which firmware update?
Why?
Do you mean this one: http://macosg.com/group/viewtopic.php?t=8798
?

5.0 using a mac?

Hi.
Has anyone been able to update the bold 9000 using a mac?
If so, can you tell me how.
I'm from Australia with Vodafone.
Cheers

Hi thalesj,
Your wireless carrier has not posted 5.0 device software on their download site. Their most recent version is 4.6. When the software becomes available the link below will provide instructions for updating your 9000.
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB19150&sliceId=1&docTy...
%20490045429
Thanks,
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

SSD's which are OK for updating firmware on a Mac?

I'm looking at a couple SSD's for a MacPro, any thoughts on which are OK with updating firmware on a Mac? Probably better to ask now before I need to..
Crucial M500 or Samsung 840 Pro? I'm assuming that OWC's offerings are probably the best for Mac compatiblity, any others?
thanks in advance.

Firstly there is a near identical question about setup of just days ago that hopefully you found and looked at in your research.
System on SSD / scratch for CS6 / projects
Lloyd's blog is full of tips: http://www.macperformanceguide.com
Start with what SSD (single) then get into multiple and setup and apps and how they are used, which really might be first thing to ask?
The Pro uses highest quality but both have much of the same controller and firmware - and it was just reviewed as to what the diference is. Find and read that.
Rick over on MacGurus setup an old working model for PS: a scratch disk + working project files is the fastest - was done with SCSI and then the first 10K SATA Raptor. Probably still holds true.
No you are not limited - I strongly suggest you set it up on Sonnet Tempo Pro RAID card and then use one 250GB 840 to start with, then add 2nd. Use one of the PCIe slots for your SSD(s). Maybe start with a 500GB.
Maybe use JBOD to combine two but not in RAID0.
The system can go on SATA II drive bay or optical bay.
Is there a one size fits all or to say this is the only way? of course not, you can though test and try and work with your budget, your Mac and move SSD to where it does the most good.
Samsung starts mass producing PCIe SSDs with 1400MB/s read speeds
When the new MacBook Air got the teardown treatment... a new SSD.
The new drive is known as the XP941 and Samsung will offer it in 128GB, 256GB, and 512GB configurations. It achieves read speeds of 1,400MB/s, which clocks it at 2.5x faster than a SATA SSD. It also only weighs 6 grams and measures 80 x 22mm. Samsung claims it only takes up a 7th of the space occupied by a typical 2.5-inch SSD.
SSD Maintenance
https://discussions.apple.com/thread/5012276
Samsung 840 Pro and Samsung 840 Solid State Drives Reviewhttp://www.xbitlabs.com/articles/storage/display/samsung-840-pro.html [06/07/13 | Storage ]
Samsung currently offers very interesting solid state drives. Some boast outstanding performance, others – are built with inexpensive TLC NAND and come with a very appealing price tag. And our tests prove all of this: we are ready to discuss what we saw when we got our hands on a Samsung 840 Pro 256 GB and Samsung 840 250 GB drives.
From last September, StorageReview article 840 vs 840 Pro - they were my favorite review site for storage for years.
http://www.storagereview.com/samsung_ssd_840_pro_review
Second only to TechReport
http://techreport.com/review/23990/samsung-840-pro-series-ssd-reviewed
X-bitlabs is also one of my popular stops and they look at Sandisk
http://www.xbitlabs.com/articles/storage/display/sandisk-ultra-plus.html
I am sold on Samsung though and feel the 840 will do fine for me, but I would use $$ to get Sonnet Tempo SSD or Pro from OWC.

I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.

I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error. I am running Mac OS 10.10.1. This only started happening when I installed the update of Adobe Acrobat.

Hi MEW1,
Is the printer connected wirelessly or wired?
Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
Close Acrobat and then relaunch it and see if it helps you while you do scanning.
Regards,
Rave

When using my mac book pro, there's a window that comes up saying to force quit applications. i've done the updates cleaned out computer and have taken it in but it wont stop coming up.

when using my mac book pro, there's a window that comes up saying to force quit applications. i've done the updates cleaned out computer and have taken it in but it wont stop coming up. what can i do?

The force quit window appears when you:
a) type the key combination <CMD> + <OPT> + <ESC>
b) you select the menu item " > Force Quit..."

If you are attempting to update using a Mac or PC with which you do not normally sync

what happens when "If you are attempting to update using a Mac or PC with which you do not normally sync", & they say in step 2 or 3 in order not to loose your stuff "If you are updating your iOS device on a computer with which you do not normally sync , or if you disconnect your device before the sync process is complete, you may notice that some media content that was previously on your device is no longer there. You can restore this content by syncing with the Mac or PC with which you normally sync."
now what if the pc that was originally used to sync my ipod , has corrupt or bad systems files that are causing it from working correctly...? when i plug it in to the o.g. operating sysytems (win xp) it doesnt ever recognize or discover the ipod through itunes. the pc will pop up the "cameras been plugged in, what would you like to do...?" but nothing thru itunes. now if i reboot & run the windows 7 operating system w/itunes that has backed my ipod before & synced a few times as well, but not the o.g. op system used from the beginning (the very initial set up done on the ipod) it works fine, but DOES give me the warning "updating to 5.0 willdelete some of your apps & media, including ... ....will only preserve contacts, calenders," ....etc.
MY HUGE CONCERN IS if i do hit update & go through w/it, & not having been able to sync it to the one normally used to sync my ipod, will that back up i made be able to restore my game seetings, GAME SAVES, & data achievement type information....?
please, i'm very hesitant to go through w/it, so if you can please help me out here & let me know asap.....i canimagine you're all busy busy, so i thank you for your time here w/this
thank you
mike z
[email protected]

Not that hard. One the computer you are using do the following:
- Transfer iTunes purchases.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer other music using a third-party program like one of those discussed here.
Copy music
- If you have synced photos you need a paid program like TouchCopy or PhoneView
- When all the media in on the computer, connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
That computer is now your syncing computer. Note that the iPod backup that iTunes makes does not included synced media like apps or music.

My cousin updated her iPad 2 to 7.1 and it said to go to iTunes so she used my Mac. It said to do a FACTORY RESTORE! HELP ! She can't get into her iPad at all.

After my cousin from California did an update on her iPad to 7.1 she could not start her iPad. It had only a message to hook it up to iTunes. She had to use my Mac to do it and it said she had to do a FACTORY RESTORE. This would mean she would lose everything!!! She does have her photos on her iPhone but other things are not backed up on the cloud. Is there a way for her to un up grade her iPad so she doesn't have to go through the loss of everything? Is there some way she can link her phone to her iPad to get the stuff off her iPad to the cloud first to save it and THEN to the factory restore? Any help would be appreciated.
She really wishes she had NEVER upgraded the software :-(
Can she use my MAC to save things to a file and then a USB drive for a worse case scenario????? But how do we dump the info if we can't see it since the iPad is frozen?
Any and all help is appreciated.
SKMOORE for my cousin Jane --first time we have seen each other in 40 years and we are the only ones in the family who are tech junkies and THIS happens.

Hey cbehr123,
Try the steps suggested in the following article to help you address this issue:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
You can also use the following article to help you troubleshoot further if you are receiving an error code:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Take care, and thanks for visiting the Apple Support Communities.
-Braden

After i updated to 10.7.5 my mac keeps freezing when using Safari

After i updated to 10.7.5 my mac keeps freezing when using Safari, I've to restart it everytime. What's the problem with 10.7.5? Is this a known problem? How can I fix it?

Go Here > http://support.apple.com/kb/DL1582 and download and Install the Combo Update.
It is Safe to install over existing.
After the Successul Install be sure to Restart your computer.

HT1338 is the garageband, iPhoto,iMovie update free, as I have purchase mac book pro last december, I am unable to update it says "To update this application, sign in to the account you used to purchase it

is the garageband, iPhoto,iMovie update free, as I have purchase mac book pro last december, I am unable to update it from app store. When I try to do so it says "To update this application, sign in to the account you used to purchase it"
I have apple ID but after signing into that account too, it does't allow to update. None of the updates for these application are show in software update of late, but it flashes in the dock where app store is . Kindly suggest.

Should be the account you registered your mac with, and/or the account you used during the setup assistant.

I want to use a mac mini as a server supporting storage. Can I pair my macair to it for when I need to perform updates and maintenance ?

I want to use a mac mini as a server supporting storage. I have other devices such as an iMac and iPad that will access information from the server. I do not want to purchase a monitor and keyboard as the unit will sit in a cupboard out of sight. Can I pair my macair to it for when I need to perform updates and maintenance ?

I have a 2010 Mac Mini running Yosemite and Server which I use
as a headless home server.
I have is set up to allow screen sharing and can connect to it and
control it with my iMac, Macbook Pro, iPhone, and a 2011 Mini Server
that I use as an HTPC.
You can check this out for all the Yosemite Server capabilities:
https://help.apple.com/advancedserveradmin/mac/4.0/
I have iTunes Home Sharing set up on it and have my entire iTunes
library on it. I can then use any of my Macs to play Movies or Songs
from it and only keep locally a select subset of that on my individual
devices.
Rather than and update server, I utilize Server's Caching Service. The caching
server will duplicate any update download (system or MacApp Store purchases)
any time a device that is connected to my network down loads one. The update will
then be stored locally and all other devices will download the update from it which
can be faster than from Apple directly. This has the advantage of only having to download
once with limited bandwidth internet connections. There is also an Update Server service
available, but it is some what more involved in setting up. However, it will download
and store all available updates.
There is another thing as well if you do not care for syncing things like Contacts, Calendar, etc.
to iCloud, you can set Server up to sync these items across devices locally.

I recently purchased a used ibook g4 and want to update to itunes 10.2. It tells me i need mac os 10.5 to do so. Today is the first day I have ever used a mac and I am not well versed on computers to begin with. What do I need to do?

I recently purchased a used ibook g4 and i want to update to itunes 10.2. It tells me that I need to update to mac os 10.5. Today is the fist time that I have ever used a mac and I am not very well versed on computers to begin with. From what I gather I need to purchase the mac os 10.5 but there are a lot of different options and I dont know what I need to do. Can somebody point me in the right direction? I dont want to spend too much money because i just want my ipod touch to be compatible with my ibook. thank you

Hi
Your question is more suitable for the 10.4's General Forum rather than 10.4 OSX Server. Post here instead:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.4_tiger?categoryID=1 77
You'll have more of a chance of someone responding.
HTH?
Tony

Updating firmware on WRK54G using a Mac

Similar Messages

Maybe you are looking for