Updating from MAXDB7.5 to MAXDB 7.5.00.29- user logon failed error

Hi
I am trying to update MaxDB 7.5.00 to MaxDB 7.5.00.29
on WAS 6.40. When I run the update via SDBUPD, I get the error "cannot establish database instance". i have looked in the log files(MaxDBUpdate_install-16.07.2005-16.13.log)
and the error is
user_logon failed
ERR
-24950,ERR_USRFAIL: user authorization failed
I am following "MaxDB update SAP note 735598" and under Windows section it states I should call the SDBUPD from the cmd prompt as follows:
SDBUPD -d <database_name> -u <dbm_userid>,<password>
so i run
SDBUPD -d J2E -u Administrator,portal
I assume <dbm_userid> is the default userid which is Admisitrator when installing WAS and MAXDB. I have not changed the default during the installation. Password "portal" is the password i entered during was +maxdb installation.
I have tried SAPJ2EDB as dmb_userid as well as J2EE_Admin, they still give the same error.
Any help on this?
Need urgent help
Much appreciated
RD
Message was edited by: RD

Hi RD,
I have just answered your question in your thread:
/thread/52043 [original link is broken]
Hope this helps to solve your problem,
Robert

Similar Messages

Updating to MAXDB 7.5.00.29- user logon failed error! Urgent Help

Hi
I am trying to update MaxDB 7.5.00 to MaxDB 7.5.00.29
on WAS 6.40. When I run the update via SDBUPD, I get the error "cannot establish database instance". i have looked in the log files(MaxDBUpdate_install-16.07.2005-16.13.log)
and the error is
user_logon failed
ERR
-24950,ERR_USRFAIL: user authorization failed
I am following "MaxDB update SAP note 735598" and under Windows section it states I should call the SDBUPD from the cmd prompt as follows:
SDBUPD -d <database_name> -u <dbm_userid>,<password>
so i run
SDBUPD -d J2E -u Administrator,portal
I assume <dbm_userid> is the default userid which is Admisitrator when installing WAS and MAXDB. I ahve not changed the default during the installation.
I have tried SAPJ2EDB as dmb_userid as well as J2EE_Admin, they still give the same error.
Any help on this?
Need urgent help
Much appreciated
RD
Message was edited by: RD

Hi
Thank you for your reply!!
I used control,control as user,password. This worked 100%, but then it reached to a point where it gave this error, i get this from the log file:
STDERR: test pgm/sqltcp.dll failed: cannot extract pgm/sqltcp.dll: sharing violation during open of existing file
What causes this error, and how can i get pass this ?
I assume some instance is started, but before I ran the SDBUPD, I stopped the J2E under sap system in SAPMMC.
Below is the output it gave when i ran SDBUPD from cmd prompt, I have bolded where the error starts:
D:\UpdatesPatches\MaxDB\maxdb-server-win-32bit-i386-7_5_00_29>SDBUPD -d J2E -u control,control
MaxDB INSTANCE UPDATE
starting installation Mo, Jul 18, 2005 at 08:57:11
operating system: Windows I386 NT 5.2 Service Pack 1
callers working directory: D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i386-7
500_29
installer directory: D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i386-7_5_00_
29
archive directory: D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i386-7_5_00_29
beginning to check sap db instances
start new instance update
finding instance type...
finding starting release...
finding migration strategy...
looking for running instances...
checking paramfile modifications...
looking for domain user...
checking data consistency for database migration...
switch database state to OFFLINE
checking SAP DB instance "J2E" successfully Mo, Jul 18, 2005 at 08:57:23
starting preparing phase of package Base 7.5.00.29 32 bit
update release check... ok
update binary magic check... ok
checking interferences to other packages... ok
collecting data finished:
independent data path: d:/sapdb/data
independent program path: d:/sapdb/programs
start extraction test run of "D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i38
6-7_5_00_29/SDBBAS.TGZ"
test pgm/sqltcp.dll failed: cannot extract pgm/sqltcp.dll: sharing violation dur
ing open of existing file
following programs are running:
dbmsrv.exe [pid = 876]
dbmsrv.exe [pid = 2496]
dbmsrv.exe [pid = 1460]
wahttp.exe [pid = 1420]
dbmsrv.exe [pid = 1188]

I am using Quicken 2007 (16.1.4) and had no problems before upgrading to OS 10.10 Yosemite. When attempting to download security updates from my financial institutions (UBS and Fidelity), I get the following error OL-290. Any fixes?

I am using Quicken 2007 (16.1.4) and had no problems before upgrading to OS 10.10 Yosemite. When attempting to download security updates from my financial institutions (UBS and Fidelity), I get the following error: Quicken could not connect to the server. Please try again later. [OL-290] I understand this is because of a mismatch between SSL certificates at the financial institutions and Apple's SSL certificate included with OS 10.10 Yosemite. Any fixes to this issue?

I have the same problem but Q for Mac 2015 does not meet my needs. Is there a fix for this problem?

Logon failed error when launching Web Intelligence from InfoView

After changing the Web Intelligence preferences in BusinessObjects Enterprise XI 3.0 Java InfoView to launch the desktop or rich client option, I get a "logon failed" error message. However, when I launch Web Intelligence Rich Client from 'Start > Programs >...' directly, the same logon information is successful. The logon is set to use Enterprise authentication which is the same logon information used to launch InfoView and Web Intelligence.
Why does the logon fail when I launch Web Intelligence from InfoView?
Edited by: Ana on Mar 31, 2009 3:43 PM

I deleted the report completely and rebuilt it from scratch, and also added names for the data table and data set generated within the project and finally, success!
Jason, thanks so much for your help which got me moving on this again.

I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.

I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.

Hi again, when you clicked on Mountain Lion and Lion in the App Store you are telling the laptop to reinstall them both.
You may have allowed simutanious downloads checked at the bottom of the window, I don't know, but I expect Mountain Lion is downloading, so Lion is waiting for it to finish, so if you have Mountain Lion installed cancel both download's.
Cancell both downloads anyway.
Go to the apple logo , top left, click on it, then click on about this mac, a window will open telling you what's installed, Mountain Lion is OX 10 version 10.8.2 click on more info, to find out more, Lion will be OX10 version 10.7.4.
Only update were it say's check for updates, not download now.

The download for update from 2.0.0.0 to 2.3.0.0 fails

The download for update from 2.0.0.0 to 2.3.0.0 fails

I had exactly the same problem as you describe, except I did not also try the update through DM.
On the advice of some folks in another forum, I tried a different WiFi connection instead of my home WiFi connection. I went to a local bookstore and used their WiFi for the update, and it worked perfectly on the first try. I'm not sure why, as the download seemed to be successful at home, and the failure was during installation, but it worked. So give that a shot.

Logon failed error when pushing data from dataset

Hi,
I am trying to embed a Crystal report in an ASP.NET 2005 web page, but every time I run the page I get the following error:
Logon failed. Details: crdb_adoplus : Object reference not set to an instance of an object. Error in File C:\DOCUME1\PB_IT_AN\ASPNET\LOCALS1\Temp\DIPSummary {DC347D6B-44F8-441F-8940-4A16ACB54E76}.rpt: Unable to connect: incorrect log on parameters.
I have set up the report using a simple xsd schema in my project which corresponds to the data being extracted from the database (SQL Server 2000) elsewhere within the project. This is being populated into a datatable (dtPCDipSummary) which is then put in a dataset and used as the data source for the report. My code is as follows:
                DSDipSummary.Tables.Add(dtPCDipSummary);
                oRpt.Load(Server.MapPath("DIPSummary.rpt"));
                oRpt.SetDataSource(DSDipSummary);
                crvDIPSummary.ReportSource = oRpt;
                crvDIPSummary.DataBind();
I don't understand what the report is trying to log on to, as the only thing it points to is the schema definition within the project - no reference to an external database.
I have scanned through numerous references to the same error on the internet and tried everything I thought might help but without success.
Please can someone point me in the right direction to get a solution to this?

I deleted the report completely and rebuilt it from scratch, and also added names for the data table and data set generated within the project and finally, success!
Jason, thanks so much for your help which got me moving on this again.

Update from Acrobat 9.3.2 Std to 9.3.3 fails

I have had Acrobat 9.3.2 (Standard) on my laptop at work for over a year now. I can no longer update to new versions. When I try and do updates as a local admin (only an admin on MY laptop) from the Help menu, or download the 9.3.3 update individually, I get the error below. Local work IT says "it ain't us, nothing has changed policy wise". They suggested re-installing the program then do the patch update to 9.3.3; I did a "reinstall" which did successfully reinstall the 9.3.2 version, but I still get the error message below when trying to get to 9.3.3.
Any idea WHAT causes this error below (can a registry change relax what Acrobat is complaining about)? I looked in the registry to see if there was anything obvious (there wasn't), so I am uncertain how to get the new update installed. My IT department is demanding I update my Flash and Acrobat to latest versions due to security problems... I have to figure out how to do this or uninstall and stop using Acrobat. Flash updated ok to the latest version (10.1.53 as I recall), but Acrobat is refusing to update. Ugh. Any help would be appreciated.
http://www.adobe.com/support/security/advisories/apsa10-01.html

Make sure that registry values below are not set to 1:
"DisablePatch" in HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
"DisableLUAPatching" in HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
Good luck

The last Apple itunes update from 1/24/14 was unsuccessful and I now receive an error message stating that a program MSVCR80 file is missing. What does that mean?

On January 24, 2014 I received a prompt on my Sony Vaio laptop that there was an iTunes program update ready. I allowed my computer to install it, I received an error message stating it could wasn't completed. Since then I can't access my iTunes and continuously receive an error message stating that a file MSVCR80 is missing. A second message pop-up box states that I need to reinstall iTunes. My question is if I remove the program how do I locate my file to reinstall it and am I going to lose any of my music?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.)

"Database logon failed" error received after upgrading from CR XI to CR 200

We have a bunch of reports that use ttx files and datasets. The code to support this was written and compiled originally using .NET 2.0 and CR XI. After recompiling using .NET 3.5 and CR 2008 (not the version that came with VS2008), when I run the reports, I now receive an error "Database logon failed". after clicking throught he error, I am prompted to enter a username and password. Just for the heck of it, I entered my database userame and password with no luck. I cancelled out of the login dialog and the frae of the report appeared but no report. No code was changed. How do I fix this?
I know that I should convert the reprots to use xml schema files but I have over 300 reports and this will take time. I need to get this fixed ASAP. After I get this running, I can then [leisurely] fix the reports and use xsd files.

Since the reports were create off of ttx files, they would be expecting a recordset at that time. How are you passing the data to the reports with CR 2008 and VS 2008?
Also, see the following:
[1468232 - How to use reports based on multiple TTX files in Visual Studio .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433363338333233333332%7D.do]
[1468232 - How to use reports based on multiple TTX files in Visual Studio .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433363338333233333332%7D.do]
And don't forget to search these forums - a fair amount of info in this topic here. The search box in the top right corner of this web page will also give you a number of blogs, KBases, wikis articles and more. E.g.; the search term "ttx net crystal", brought up the above two KBases (along with a number of other content).
Oh. If this is critical, remember you always have the option of creating a phone case;
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Edited by: Ludek Uher on Oct 7, 2011 7:04 AM

TS3694 upgrade from 4.3.3 to 5.1.1 b208 gives an error " the iphone could not be updated because the firmware is not compatible"

I recieved an error while trying to update from ios 4.3.3 to 5.1.1 b208 the error:" the iphone could not be updated because the firmware file is not compatible"

This often happens when iTunes is not up to date. Try updating iTunes to the latest version, then try updating your phone again.

Getting error NSURLErrorDomain error -1100 when trying to get updates from the App Store. Are updates still available for OS below Maverick?

Started getting this error today (01/14/2014) when trying to download updates from the App Store for my MBAir 11" mid 2013. Error: NSURLErrorDomain error -1100
Are updates still available for OS below Maverick?

That error may result from connecting to a cellular network via a phone or mobile broadband device. If that's what you're doing, try another network.

HT4972 how about updating from 2.2.1 to anything

how about updating from 2.2.1 to anything. I get an unknown error message and cannot go any further.

Try on another computer
Then see:
-1 error
-1 error too
If still problem means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Performance problems after Update from 7.6.00.37 to 7.6.03.15

Hi,
after the Update from 7.6.00.37 to 7.6.03.15 in our live system we noticed a lot of performance problems. We have tested the new version before on our test system, but there don't noticed effects like this.
We have 2 identical systems (Opteron 64 bit, openSuse 10.2) with log shipping between them. We updated first the standby system, switched from online to standby (with copy of cold log) and started the new server as online system. After that we run a complete backup (runtime: 1 hour) for starting a new backup history and for activating autolog. Then
With the update we changed USE_OPEN_DIRECT to YES, but the performance of the system was very slow afterwards. After the backup it remains at a high load average (> 10, previous system had about 2-4), with nearly 100% of CPU usage for the db kernel process.
Next day we switched USE_OPEN_DIRECT back to NO. The system first runs better, but periodically rises up to a load average of 6 and slow down the performance of various applications (somebody says about 10 times slower). Here we also noticed a high usage (now 200-300%) of the db kernel process.
Our questions are:
1. Has something basically changed from 7.6.00.37 to 7.6.03.15, so that our various applications (JDBC, ODBC and Perl/SQLDBC partially on old linux systems with drivers from 7.5.00.23) don't reach same performance as before?
2. Are there any other (new) parameters, which can help? Maybe reducing MAXCPU from 4 to 3 for reserving capacities for the system (there is only one maxdb instance running)?
3. Is the a possibility to switch back to 7.6.00.37 (only for worst case)?
I have made some first steps with x_cons, but don't see any anomalies on the first look.
Regards,
Thomas

Thomas Schulz wrote:>
> > > Next day we switched USE_OPEN_DIRECT back to NO. The system first runs better, but
> >
> > What is it about this parameter that lets you think it may be the cause for your problems?
> After changing it back to NO, the system runs better (lower load average) than with YES (but much slower than with old version!)
Hmm... that is really odd. When using USE_OPEN_DIRECT there is actually less work to do for he operating system.
> > > Our questions are
> > >
> > > 1. Has something basically changed from 7.6.00.37 to 7.6.03.15, so that our various applications (JDBC, ODBC and Perl/SQLDBC partially on old linux systems with drivers from 7.5.00.23) don't reach same performance as before?
> >
> > Yes - of course. Changes are what Patches are all about!
>
> Are there any known problems with updating from 7.6.00.37 to 7.6.03.15?
Well of course there are bugs that have been found inbetween the release of both versions, but I am not aware of something like the performance killer.
We will have to check this in detail here.
> > > I have made some first steps with x_cons, but don't see any anomalies on the first look.
> >
> > Ok, looking into what the system does when it uses CPU is a first good step.
> > But what would be "anomalies" to you?
>
> Good question! I don't really know.
Well - then I guess 'looking at the system' won't bring you far...
> > Do you use DBAnalyzer? If not -> activate it!
> > Does it gives you any warnings?
> > What about TIME_MEASUREMENT? Is it activated on the system? If not -> activate it!
>
> OK, that will be our next steps.
Great - let's see the warnings you get.
Let us also see the DB Parameters you set.
> > What parameters have changed due to the patch installations (check the parameter history file)?
> >
> > What queries take longer now? What is the execution plan of them?
>
> It seems to happen for all selects on tables with a lot of rows (>10.000, partially without indexes because automatically generated). With the old version we had no problems with missing indexes or the general performance. Unfortunatly it is very difficult to extract some sql statements out of the JBoss applications. But even simple queries (without any join) runs slower, when the load average rises over 4-5.
Hmm... the question here is still, if the execution plans are good enough to meet your expectations.
E.g. for tables that you access via the primary key it actually doesn't matter how many rows a table has (not for MaxDB at least).
> > BTW: how exactly do the tests look like that you've done on the testsystem?
> Usage over 6 weeks with our JDBC development environment (JBoss), backup and restore with various combinations of USE_OPEN_DIRECT and USE_OPEN_DIRECT_FOR_BACKUP.
Sounds like the I/O is your most suspect aspect for overall system performance...
> > Was the testsystem a 1:1 copy of the productive machine before the upgrade test?
> No - smaller hardware (32 bit), only 20% of data of the live system, few db users and applications.
>
> > How did you test the system performance with multiple parallel users?
> Only while permanent development with the 2-3 developers and some parallel tests of backup/restore. Unfortunately no tests with many users/applications.
Ok - so this is next to no testing at all when it comes to performance.
> An UPDATE STATISTICS over all db users seems to change nothing. At the moment the system remains markedly slow and we are searching for reasons and solutions. Another attempt will be the change of MAXCPU from 4 to 3.
Why do you want to do that? Have you observed any threads that don't get a CPU because all 4 cores are used by the MaxDB kernel?
regards,
Lars

Photoshop cc 2014 slow after update from mac os 10.9 to 10.10.2

hello
i have update from 10.9 to 10.10.2 i am using a mac pro 2012 2.4 ghz 6 cores 48GB ram and a NVIDIA Quadro K5000 3583 MB
since i update photoshop is extremely slow
any function takes much longer to render , and i am now trying to reverte to the back up runing 10.9.5 again but before that would liek to know if someone can please help me
towards any advice how to try to speed up photoshop been cc or cc2014
thanks
luis
Reply

Kitcateleven please see Error U44M1I210 | Install updates for information on how to resolve the U44M1I210 error.

Updating from MAXDB7.5 to MAXDB 7.5.00.29- user logon failed error

Similar Messages

Maybe you are looking for