Updating graphic driver issue

hi i have a problem, updating my HD graphics drivers its not updating, thrown error message ( this computer does not meet the minimum requirements for installing the software ). this drivers are related to my laptop. and my brightness button not working. (i have no recovery midea ) ple give me a solution.

Similar Messages

Cannot update Graphics Driver

I have an HP Envy 4 1030-us. Intel Graphics HD 4000. I have even gone to Intel's forums for help.
1) If I try to install the updated graphics driver - fails
2) Uninstall old graphics driver, per Intel forum advice, restart computer, on restart old driver installs automatically.
3) Uninstall old graphics driver, try to install updated driver, fails, restart, on restart old driver installs uatomatically.
Please don't suggest I have the wrong driver. Any other suggestions warmly welcomed.

Hi @DavidENJ ,
Thank you for your inquiry, I will do my best to assist you.
I understand that you are unable to install the updated driver for the Intel Graphics HD 4000. Intel advised you to uninstall the driver and then restart before installing the new driver but you were unsuccessful.
I would try deleting the driver not uninstalling. Once deleted it cannot reinstall it as it is no longer there.
The latest supported driver for Windows 7 and your notebook is sp58046.exe version 8.15.10.2712.
If you are trying to install a driver from the Intel website, it may or may not work correctly. Downloading or Updating Software and Drivers for HP Computers.
If you are still having an issue with installing the driver, try installing it in safe mode with networking. Entering Safe Mode (Windows 7)
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

MSI Z77a-G45 graphics driver issue.

02-june-2013
MSI Z77a-G45 graphics driver issue.
Trying to install the graphics drivers for this board from the MSI site, I but every time I do so on loading windows 7 my monitor just goes to sleep and I have to roll back the driver in safe mode. This is the same for the driver found in the windows 7 updates.
Iv downloaded the files a few times over and reinstalled windows twice and the problem remains. Can anyone suggest anything? Is there something I’m missing or need to set in the UEFI bios for using the onboard graphics?
MSI Z77A-G45, i5-3570K, 2x 8GB Corsair memory, Windows 7 64bit.
Thanks.

My BIOS is E7752IMS V2.10
Iv already downloaded V2.A
However I have to say the guide at uk.msi.com/service/biosupdate/ , appears to be putting v2.2 on top of v2.2.
it also says "Download the BIOS that matches your motherboard and version number to your USB device."
I'm not entirely sure what is meant by 'version number' but it dose suggest i need to download V2.10 not V2.A ... call me picky but i want to be sure! lol.
Can anyone confirm ether way? It dose seam rather odd!
Thanks.
**edit
Update on my graphics issue
With the default driver, just before the windows 7 log in screen appears. I was getting a portion of it appear first on the bottom 1/8 of the screen. Now its appears to be a snowstorm of bad graphics and its the same when I switched to using HDMI instead.
Not sure if that's a good sign!
For reff my screen is a HP LP2475w tho I'm rather sure there is nawt wrong with the screen.

Windows 8.1 not working properly, may be due to graphics driver issue

i have installed windows 8.1, but when i press widows key... the menu which opens is laging.... is it normal or some graphics driver issue... help required

Hi
It depands on the type of system/notebook you have installed windows 8.1 on
Please give us the Product # and the modle name of the notebook so that we can answer the question better and also try to find the right drivers if any.
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Update Graphics Driver on Satellite L55-A

Hi All,
I want to update Toshiba's L55-A5385 Graphics Driver. I have already updated Intel(R) HD Graphics 4000 Display Adapter
Driver from Device manager but i expected it will update to version latest vesion 15.33.35.64.4176 (https://downloadcenter.intel.com/search?keyword=Intel+HD+Graphics+4000 ) but i'm still having 10.18.10.3282
version. Please suggest me How can i update Graphics Driver.
Also when i connect my Laptop to TV using HDMI cable it looses quality and also have small glitches. Please suggest How can i get best quality through HDMI cable and is this problem relates to Graphics Driver update?
My laptop configuration is
Model : Satellite L55-A
Processor : Intel Core i5 3337U CPU @ 1.80GHz
RAM : 6 GB DDR3
GPU : Intel(R) HD Graphics 4000
OS : Windows 8.1 64 bit
Thank You
Ketan

Download and install the latest driver from Intel's site. Don't use the update driver feature in device manager, it rarely updates the driver of the device.
In regards to hooking it up to your TV, make sure your HDMI cable is Gold plated not the regular silver coated cables. If the one your using is working fine with say, a blu-ray player, update the driver first and try comparing the results.

Surface Pro 3 Display/Video/Graphics Driver Issues - DisplayPort, External Monitors, Windows 10 Build 9926

Surface Pro 3 - i5 with Intel HD Graphics 4400
Windows 10 build 9926
All Latest updates installed
Intel Graphics Driver 10.18.15.4079.
Latest system update released on Jan 22nd (which I understand is just the latest intel graphics driver?).
The display driver status has this error message: Windows has stopped this device because it
has reported problems. (Code 43) - I assume it's
reverting to the basic Microsoft driver when this occurs. Which explains why my displayport (External monitors) will not work.
I have uninstalled the driver completely (and deleted the driver files), tried the Windows basic driver,
and rebooted several times with no luck.
I cannot get my docking station displayport or the displayporton my surface pro 3 working.
According to Microsoft (see below), this is a known issue UNTIL you update to display driver
version 4079 - which I have.
Known issues on Surface after updating to Windows 10 January Technical Preview
On Surface Pro 2 and Surface Pro 3, the Mini DisplayPort won’t work on the Windows 10 January Technical Preview until you’ve installed graphics driver 4079 or later. Check Windows Update often for the most recent graphics driver.
On Surface Pro 2 and Surface Pro 3, you’ll notice poor graphics rendering on the Windows 10 January Technical Preview until you’ve installed graphics driver 4079 or newer from Windows Update. Check Windows Update often for the most recent graphics driver.
If you’re using video driver 3496, you may need to start in safe mode and remove that driver. Then restart Surface in normal mode and go to Windows Update to get the most recent graphics driver.

Hi Nicholas,
Similar issue has been asked here:
Surface Pro 3 restarting after a series of blank screens!
For error code 43, here is a reference:
Code 43: Windows has stopped this device because it has reported problems
For the current situation, please try to wait for the driver update, as display driver version 4079 didn't work well at your side, please submit this through Windows Feedback Tool.
Best regards
Michael Shao
TechNet Community Support

T61p resolution modes limited after update graphic driver

This is the first place I ask for help after searching solutions on Google without success.
System is 14" T61p, WinXP, graphic card is FX570M, I sometimes play quite old games, which run in low resolution modes like 800*600 or even 640*480(well, I am an old person...). it worked fine before I updated the latest driver (version 6.14.11.7874) few days ago, then I got several problems.
When I run game StarCraft, the game screen will appear only on upper left corner, like a quarter of the whole screen, and the cursor moves in that range as well, the rest of the screen is black. I looked up the Blizzard tech forum, it says select 640*480 display mode. I followed the steps: display properties -> advaced -> adapter -> list all modes -> select 640*480, then the entire screen goes black for few second and back to 1400*1050 like nothing happened.
Another game Diablo2 failed to launch due to DirectDraw error.
I am not dressing the problem with particular games, but they all point to the display issue. As everything worked fine before I update FX570M driver. It seems new driver no longer support 640 by 480 mode(any point from Nvidia?). I wonder someone can help me before I roll back the driver.

Trying to diagnose drivers can become a black hole waste of time.
An alternative if you haven't already tried is using a legacy virtual machine then setting the VM into full screen.
I play StarCraft and Rainbow6 on a Windows98 VM and avoid compability issues with hardware regardless of the system whether it is a desktop or notebook
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

Upgrade to Windows 10 graphics driver issue Compaq 100-105ef

Have just upgraded my Compaq 100-105ef to Windows 10, no issues except the graphics driver which is causing me problems with some games that played OK under Windows 8.1.The processor is AMD E1-1500 with integrated HD7310 graphics. Have tried the AMD site and their Windows 10 driver package does not support my graphics.Anyone have the same issue or know a workaround?My current driver is 15.200.1012.2 which worked really well under Windows 8.1. Thanks in advance.

Hi, Your PC has not been certified by HP for Windows 10 hence no drivers updates have been posted. Try reinstalling the posted W8.1 driver.

Qosmio G10-133: I am having random lockups - Graphic driver issue

Hi
my machine screen goes blank at random and i get the below error message which suggests i need finally the latest graphic driver. Uninstall the Nividea driver from my machine which appeared to fix the problem but my graphics were reduced. I then reinstalled from the Toshiba site the graphic driver and i have the same problem.
Please can you help?
Error caused by NVIDIA Graphics Driver: no specific solution found.
Thank you for submitting an error report.
Problem description:
An unknown error occurred in NVIDIA Graphics Driver, created by NVIDIA Corporation.
Recommendations:
NVIDIA Corporation is currently not aware of a specific solution for the problem that you reported. Below is a list of recommendations to take that may help prevent the problem from recurring.
1. Download and install an updated NVIDIA Graphics Driver from one of the following locations:
Microsoft Update
NVIDIA Corporation
2. If an updated driver is not available, check with your computer manufacturer.
3. If you are running the latest version of NVIDIA Graphics Driver, please contact NVIDIA Corporation for your support options.
Additional information:
If this problem continues to occur with the latest product updates for NVIDIA Graphics Driver we highly recommend you obtain assistance and troubleshooting information directly from NVIDIA Corporation.
If you are not familiar with NVIDIA Graphics Driver and you are questioning how the program was installed on your computer, it is possible that the program was installed with another program. If you do not know why NVIDIA Graphics Driver is running, many programs configure themselves to start automatically every time you turn on your computer.

Hi
I agree with previous comment. We don?t know what did you done with your unit and why the display driver makes problems now. The fact is that you should use the display driver designed by notebook manufacturer and not from graphic card producer.
How to say now what you can do? Advice given by NVIDIA is correct. Try to start the unit in safe mode using F8 key at the start up. From device manager remove listed graphic device or even graphic driver software listed under software in control panel (if you can find something there). Restart the unit and when WXP is loaded try to install Toshiba designed driver again.

Update graphic driver on Bootcamp (Windows 7), iMac late 2013

Hi guys,
I googled a lot but there are way to many possible solutions...
I bought a late iMac 27" with a NVIDIA GeForce GTX 775M 2GB. I installed Windows 7 (64Bit) for gaming purposes. Now I'd like to update the graphics driver but am not sure how to do it.
--> is it possible to update them directly via the official NVIDIA drivers or do I need some "special" drivers from Apple?
I don't want to mess up the boot camp installation since installing windows and especially doing all the windows-updates takes forever and a day...
thanks a lot for your help!

itsVashi wrote:
--> is it possible to update them directly via the official NVIDIA drivers or do I need some "special" drivers from Apple?
Install the driver provided by NVIDIA. In fact Apple uses NVIDIA drivers in Boot Camp, but they are very outdated, so they will not give you the best performance. To fix that, go to the NVIDIA website and install the most recent NVIDIA driver.

Lenovo G560 laptop graphic driver issue

Hi
My lenovo 560 laptop's specs:
Processor: Intel(R) core(TM)i3 cpu m380
Cpu@ 2.53GHz (4 CPUs), 2.5GHz
Memory : 3gb RAM
System model: 20042
DirectX11
Window 8.1 pro 64-bit os
Approx .total memory: 256 mb
Recently i lost my laptop driver cd that perfactly work on window 8.1 verson .
After a formating my laptop resolution change in to 1080×768 (recommended) (32bit) (64Hz) and its give me a aweful video quality
I download too many graphic driver from lenovo support that support 560 model laptop 32bit or 64 bit , but its not working , i try to update my window 8.1 driver but its show "the best driver software for your device is already installed".
Does anyone have a suggestion where i can download the right graphic driver for my laptop, and any one have download link then plz send ...

Hi akashx,
Welcome to Lenovo Community Forums!
Please try Completely running it on Inbox driver first.
Open Device Manager and Right click uninstall the Intel HD Graphics and a pop up window will appear.
Make sure to place a check on the Delete driver software check box.
Restart the computer
Perform the steps twice, until the Delete driver software pop up box will show no checkbox anymore.
restart the computer again and install this driver
https://download.lenovo.com/UserFiles/Driver/en/Downloads%20and%20Drivers/Z460Z560/Win7/IN2VDO50WW5.exe
Let us know your findings
Cheers!

HP ProBook 4530s Windows XP Graphics Driver issue

Hey
I just got a few of these 4530s and installed XP on them however the graphics driver won't take. I keep getting the error "This computer does not meet the minimum requirements."
It has Service Pack 3 and is Windows XP Pro which is the only requirements I could find for the driver. Does anyone have any ideas why it won't install the graphics driver?
This is the driver I found on HP for the graphics. Graphics Driver
I have even googled and can't find any other ideas or situations where this occurs.
Any ideas would be very much appreciated. Thanks!
This question was solved.
View Solution.

Please give us the hardware ID from device manager for the video chip. Any chance the units you have use the discrete AMD graphics instead of the integrated Intel HD 3000? That would explain why the Intel driver doesn't work.
You can also go to intel.com and download their generic video driver for the HD graphics for 32 bit XP:
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20611&ProdId=3231&lang=eng
This covers both the i series core version of the intel video and the Celeron version; again not sure what you have.

Kernel Panic - When logging off 10.8.2 - graphics driver issue?

Looks like this has something to do with graphics driver. Note the bold line in the error log below.
Any idea how to fix this??
Wed Nov 7 21:04:36 2012
panic(cpu 2 caller 0xffffff801ae43d9e): "a freed zone element has been modified in zone: kalloc.2048"@/SourceCache/xnu/xnu-2050.5.8/osfmk/kern/zalloc.c:219
Backtrace (CPU 2), Frame : Return Address
0xffffff810c78b8a0 : 0xffffff801ae1d636
0xffffff810c78b910 : 0xffffff801ae43d9e
0xffffff810c78b950 : 0xffffff801ae435e2
0xffffff810c78ba30 : 0xffffff801ae245fd
0xffffff810c78ba60 : 0xffffff801b227f52
0xffffff810c78ba80 : 0xffffff7f9c95446a
0xffffff810c78bab0 : 0xffffff7f9c981957
0xffffff810c78bad0 : 0xffffff7f9c96d1aa
0xffffff810c78bb50 : 0xffffff7f9c990620
0xffffff810c78bba0 : 0xffffff801b26a7d3
0xffffff810c78bbc0 : 0xffffff801b26b3ad
0xffffff810c78bc20 : 0xffffff801b268daf
0xffffff810c78bd70 : 0xffffff801ae97ff1
0xffffff810c78be80 : 0xffffff801ae20afd
0xffffff810c78beb0 : 0xffffff801ae10448
0xffffff810c78bf00 : 0xffffff801ae195fb
0xffffff810c78bf70 : 0xffffff801aea58a6
0xffffff810c78bfb0 : 0xffffff801aece833
      Kernel Extensions in backtrace:
         com.apple.GeForce(8.0)[045479F2-111B-30C3-B6DE-EA3E6149BE98]@0xffffff7f9c94d000 ->0xffffff7f9ca0dfff
            dependency: com.apple.NVDAResman(8.0.0)[70B059AC-0DE8-30E2-A7A5-D3D868A44CCA]@0xffffff7f9b5 41000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[B3925366-91C4-3AF6-A7B5-4262C9B907FC]@0xff ffff7f9b52d000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[91827A5B-1040-346D-B214-007B58415E57]@0xffffff 7f9b4b6000
           dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D508531E-4E0E-3C12-9679-115362197FBC]@0 xffffff7f9b4ea000
BSD process name corresponding to current thread: WindowServer
Boot args: arch=x86_64
Mac OS version:
12A206j
Kernel version:
Darwin Kernel Version 12.0.0: Tue May 8 17:30:17 PDT 2012; root:xnu-2050.5.8~1/RELEASE_X86_64
Kernel UUID: E520B189-2D5A-3123-BD71-BE142E468536
Kernel slide:     0x000000001ac00000
Kernel text base: 0xffffff801ae00000
System model name: MacBookPro6,1 (Mac-F22589C8)

Ok, disabled, for the moment no errors, let's hope!
Thank'you for your support!
Afrikaans
Albanian
Arabic
Armenian
Azerbaijani
Basque
Belarusian
Bulgarian
Catalan
Chinese (Simplified)
Chinese (Traditional)
Croatian
Czech
Danish
Detect language
Dutch
English
Estonian
Filipino
Finnish
French
Galician
Georgian
German
Greek
Haitian Creole
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Irish
Italian
Japanese
Korean
Latin
Latvian
Lithuanian
Macedonian
Malay
Maltese
Norwegian
Persian
Polish
Portuguese
Romanian
Russian
Serbian
Slovak
Slovenian
Spanish
Swahili
Swedish
Thai
Turkish
Ukrainian
Urdu
Vietnamese
Welsh
Yiddish⇄Afrikaans
Albanian
Arabic
Armenian
Azerbaijani
Basque
Belarusian
Bulgarian
Catalan
Chinese (Simplified)
Chinese (Traditional)
Croatian
Czech
Danish
Dutch
English
Estonian
Filipino
Finnish
French
Galician
Georgian
German
Greek
Haitian Creole
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Irish
Italian
Japanese
Korean
Latin
Latvian
Lithuanian
Macedonian
Malay
Maltese
Norwegian
Persian
Polish
Portuguese
Romanian
Russian
Serbian
Slovak
Slovenian
Spanish
Swahili
Swedish
Thai
Turkish
Ukrainian
Urdu
Vietnamese
Welsh
YiddishDetect language » Italian

Update graphic driver

On Mac Mini, how do I make sure I have the latest Graphics Driver? My GoPro Studio 2 software won't render movies anymore. Go Pro says to make sure have latest graphic Driver. (Used to)
I have Mac Mini Mid 2010
2.4GHZ Intel Core 2 Duo
8 GB DDR3
NVIDIA GeForce 320M 256 MB Graphics Driver
OS X 10.7.5

You can't really. Unless they want to bother upgrading their software to include your graphics chip, you are basically out of luck. You could always ask for the older version that worked well if you don't have a backup of it, and install the operating system that it worked previously on.
http://www.roaringapps.com/ may help you find alternative software that works on newer operating systems that does what you need.

AMD Graphics driver issue

so i installed the newest build and i receive an error from AMD saying there's no driver or isn't responding correctly so i reinstalled the driver for it 3 times and still no success i will attempt to uninstall the current drivers for it and reinstall but
i need some assistance on this

Try this: Download AMD Catalyst Omega 14.12 for your Hardware. Extract its content. Go to Control Panel -> Devices manager -> Choose device Update driver for this device -> Give exact pathway for extracted content of Catalyst 14.12 -> Wait until
driver is installed. Reeboot.
After reeboot U should have your radeon listed in Device Manager. But there will be no Catalyst Suite. To install it, start normall installation process of AMD Catalyst Omega 14.12 (choose customized install) Thick to instal Catalyst Suite.
Now U have device and Suite installed. Works like a charm with AMD 7700M, Intel 4000HD switchable graphics & Windows 10 Technical Preview v. 9926
Best Regards

Updating graphic driver issue

Similar Messages

Maybe you are looking for