Updating import declarations with duty types and message types
Hi All,
I am a GTS developer. There are configuration changes in the system . As a result, the import declarations and presentation documents created in 2014 and 2013 have to be updated with :
1.) Replace old duty types with new ones in the logistic costs tab.
2.) Replace old message types with new ones in the communication tab.
Any pointers on how to go about , regarding the table links between the duty types and declarations, message types and declarations , Function modules would be very helpful. Thanks much in advance.
Best Regards
Shankarnarayan.K.
Hi SK,
That's a strange request. Of course the configuration changes invalidate the old Declarations, but your attempt to re-write history isn't likely to achieve much.
Since the messaging cannot be repeated, it makes no sense to update the documents. And similarly, since the Declarations cannot be re-sent, updating the Duty Types will have no effect.
But if you must do it, here are some tips:
For the duty calculation, you need to update entries in table /SAPSLL/LEGCULC. Assuming the the Duty Types haven't been re-named, you should loop through the entries and use MOVE-CORRESPONDING to copy the values from the configuration tables /SAPSLL/TLC_ASC (key = LAUNR) and /SAPSLL/TLC_AAR (key = TLC_AAR, matching /SAPSLL/LEGCULC-TLC_AART). First check that all relevant fields have the same name, considering the Data Elements involved.
For the messages, you need to update entries in table /SAPSLL/LEGMES. However, I have no idea which fields your esteemed Application Consultant might have changed there, so can't immediately advise what should be copied.
In both cases, the link to the Customs Declarations is that GUID_MOBJ = /SAPSLL/CUHD-GUID_CUHD, and MOBJT = 'O' (that's the letter, not number zero).
Hope that helps.
Regards,
Dave
Similar Messages
-
Which IDoc Type and Message Type to use for Credit Memo?
Could you guys please tell me which IDoc type and Message Type to use for Credit Memo? Also if possible tell me the process code/ function module.
Will certainly give points for right answer. Thank you for reading.Hi,
You can use IDoc type FIDCCP02 with message type FIDCC1/FIDCC2 for Credit Memo.
Also you can use this FM FI_IDOC_CREATE_FIDCC1/
FI_IDOC_CREATE_FIDCC2 to generate the IDoc.
Regards,
Ferry Lianto -
Difference Between Data type and message type
Hi,
i have doubt on data type and message type.why we are mapping the message type why not data type?wht is the difference between data type and message type?Hi Narayanana,
Data type defines the structure of your xml message.Message type is the wrapper of data type.You will be using your message type while mapping and not the data type.Its the abstraction concept used in oops
kanan thiyam
Posts: 28
Questions: 7
Registered: 1/8/07
Forum points: 24
Re: What is deffernce b/w Data type and message type
Posted: Jun 13, 2007 8:05 AM in response to: suresh k Reply E-mail this post
Hi Suresh,
Data Type defines the structure of the message and it will be wrapped under Message Type.
Hope the details below will clearify your doubts.
A data type in a programming language is a set of data with values having predefined characteristics. Examples of data types are: integer, floating point unit number, character, string, and pointer.
The characteristic of columns and variables that defines what types of data values they can store.
Check out the details:
http://en.wikipedia.org/wiki/Data_type
A message type comprises a data type that describes the structure of a message. At the following points in SAP Exchange Infrastructure you can refer to the message to be exchanged at runtime by using the message type:
Details:
http://help.sap.com/saphelp_nw04/helpdata/en/2d/c0633c3a892251e10000000a114084/content.htm
kanan -
Idoc type and message type for Planned Independent Requirement (PIR)
Hi
Can anyone please give me the information on the idoc type and message type for Planned Independent Requirement(PIR)?
And also the prerequisites to use them.
Regards,
Lohitha
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on May 23, 2011 10:45 AMHi,
You can use IDoc type WMMBID02 with message type WMMBXY.
Also please check test program RLMBXY00 to simulate IDoc WMMBID02.
Regards,
Ferry Lianto -
Idoc type and message type for inventory
Hi All
What is the idoc type and message type for inventory adjustments? Thanks for any help
Thanks
RickyHi,
You can use IDoc type WMMBID02 with message type WMMBXY.
Also please check test program RLMBXY00 to simulate IDoc WMMBID02.
Regards,
Ferry Lianto -
Hi ,
Anyone can send what are all the std idoc types and message types are there in SAP?
Coz i dnt have SAP.
Please let me knowThe IDoc type indicates the SAP format that is to be used to interpret the data of a business transaction.
An IDoc type consists of the following components:
· a control record
This is identical for each IDoc type.
· several data records
One data record consists of a fixed key part and a variable data part. The data part is interpreted using segments, which differ depending on the IDoc type selected.
· several status records
These are identical for each IDoc type and describe the statuses an IDoc has already passed through or the status an IDoc has attained.
You find various IDOC / Message types in SAP -
http://www.erpgenie.com/sapedi/message_types_masterdata.htm
IDoc Types - Message Types -Accounting Business Processes
IDoc Types - Message Types - HR Business Processes
IDoc Types - Message Types - Logistics Business Processes
Eg.
General Message types / IDoc types / BAPI
Vendor CREMAS / CREMAS02
Customer DEBMAS / DEBMAS03
Accounting Message types / IDoc types / BAPI
G/L account GLMAST / GLMAST01
Cost center COSMAS / COSMAS01
Cost element COELEM / COELEM01 -
Difference between IDOC Type and Message Type
Hi, please let me know the difference between IDOC type and Message Type?
ThanksHi,
Message type is business name for IDOC you are sending hiding all technical details of the IDOC.
IDOC type gives more technical information about structure of the IDOC.
You will be linking IDOC type to message type while processing IDOC in runtime. You will be specifying message type and IDOC type in WE20 trasaction which says which message will go to which partner whether it is outbound or inbound.
Best Regards,
Krishna -
hi,
may i know what is the difference between basic type and message type in WE05.
thanksHi,
This is similar as Subject of a mail and content of the mail..
Without seeing the contect if the give appropriate subject we will know what was the mail regarding.
the same thing applies to IDOC also.
Regards,
Nagaraj -
Resources for designing data types and message types
Hi
I wanted to know if anyone can recommend me some good resources which can explain the design considerations for designing data types and message types in XI which can help promote reusability.
Thanks.
Best Regards,
Kiranhi,
there no rare rule whe you define your data type, why i tell you this, because you define a data type since the documentation that sender sistem team gives to you. so you only have to copy this structure to PI.
now about Message Type less problems, because, you a Data type is assign to a Message Type, whats it means.
when you define a DATA type you are defining the structure of you XML, que you assing the data type to a message type this structure pass to be an xml document.
Thanks you
Rodrigo -
EDI 821 and EDI 823 field mapping file and basic IDOC type and message type
Hi All,
We are facing some issues regarding EDI 821 and EDI 823 file mappings.
We are mapping EDI 821 and EDI 823 transactions into SAP using IDOCs. Currently we are using the below entries
EDI 823 - Lock Box
Basic IDOC type - FINSTA01
Message type - FINSTA
Process Code - FINS
The problem is we are able to get the IDOC into SAP with status red and the various errors were due to not able to create the lockbox entry in SAP and once we got yellow status also but the lock box entry was not created and the errors are like No Conversions,no header etc.
EDI 821 -
Basic IDOC type - PEXR2002
Message type - PAYEXT OR REMADV
Process Code - PEXC OR REMA
We are facing the same problem here also and the internal payment order is not creating in SAP and IDOC was generated with yellow status and red status.
We are trying different combinations but nothing is working so far.
I need the following things to proceed furthur.
1)Are the IDOC , Message and process codes are correct that I am using now for both EDI 821 and EDI 823
2)If those are not correct, can you please let me know the correct entries
3) Please provide me the field mapping if any one of you have worked earlier for both the above IDOC and message type or new ones and we have one field mapping now but if you can send it to me then I can re check it.
4) Do we have to create any configuraion or customizing in SAP to create the IDOC in green status and if so please let me know the customizing steps and procedures for both EDI 821 and EDI 823.
thanks in advance for all your help.
Please let me know if my question is not clear.
Thanks,
Ramesh.Hi Ramesh,
I believe you are using those interfaces with the business partner type as Bank, Whatever idoc type, message type and process code you have used are perfectly correct.
First of all did you enable your bank for EDI, the house bank has to be EDI enabled first then only your idoc's can be processed, talk to your fi functional consultant and he might help you.
Are you can give me the exact error and i can help you as well.
Thanks,
Mahesh. -
Diff between Idoc type and message type
Hi Friends,
I have a created a message type and IDoc type with similar name ZVOU_IN_LYNX .
If I have the similar names for these two , is there any further future related issues.
kindlly suggest on this issue ASAP.
Regards
PunjaalaHi ,
idoc type is a comibination of Segments it is like a structure.
Message type actually tells the meaning of idoc..
Message type + iodc type + exension idoc type used in furthe uses..
here actually idoc type come to use..
we30 Idoc type "single Idoc type--with basic type..
we30 idoc type "multiple idoc with above copy called extension idoc..
WE81 Message types: Create a new messagetype "Single message type
WE82 Idoc Type/Message: Create Entry to link the above defined message type with the IDOC + "extension....
WE57 Message/Application object: Create entry for Functionmodule/IDOC type/Messagetype/Object
Edited by: Prabhu Das on Apr 17, 2009 7:27 PM -
how to find the idoc type and msg type for particular delivery no.
[[i can see the idoc no in vl33n which i have to display in itab.]]<b>Message type</b>. A message type represents the application message exchanged between R/3 systems and R/3 and an external system. A message type characterizes the data sent across systems and relates to the structure of the data called an IDOC type (see below). For example, MATMAS is a message type for Material Master, and INVOIC is a message type for an Invoice (Billing Document). ALE supports over 200 message types in R/3 and about 200 application areas.
<b>
IDOC type and IDOC</b>. An Intermediate Document (IDOC) type represents the structure of the data associated with a message type (DEBMAS02 for message type DEBMAS Customer Master, and WMMBID02 for message type WMMBXY Goods Movements), while an IDOC is an object containing the data of a particular message type. IDOCs are data containers with intelligence built in. Each IDOC contains one and only one business object. For example, an IDOC of type SHPMNT01, message type SHPMNT, will contain data only of one Shipment Document. Generally, the architecture of an IDOC is independent of the message type by virtue of ALEs ability to redefine it for any message type.
<b>Use transaction BD64 or the following menu path to maintain the model: From the IMG (Implementation Guide), Cross-Application Components -> Distribution (ALE) (*) -> Distribution Customer Model -> Maintain Distribution Customer Model Directly -> Maintain Distribution Customer Model Directly.</b>
Hope this helps you....
Regards,
Pavan -
Create IDOC type and Message Type
Hi folks,
I have a requirement that is....
Allow user to set up by supplier to send out purchase orders through EDI with prices including taxes. In this case I'm planning to change the program ZXM06U02 to update the corresponded field as needed.
Since I need to control which message must be considered to update the field...my question is...Can a create or copy a message type? Or could I create a copy of the IDoc type?
Thanks in advance!Tks for your answer. But in this case I can not update the field in all messages. The information should be updated according the vendor. Because of that, I'm thinking to create a copy of the idoc type then the user will be able to set up the message type on partner profile. What do you think about it?
-
Idoc types and message types we use in IS-Retail
hi gurus,
can anyone tell me what are the idoc types and their message types that we use in SAP IS-Retail .
Thanks in advance
regards
gopalHello, these are the main idoc types used in sap retail:
'WPDBBY01' POS outbound: bonus buy conditions
'WPDCUR01' POS interface: Download exchange rates
'WPDNAC01' POS interface: Download products
'WPDSET01' POS interface: Download set assignments
'WPDTAX01' POS interface: Download tax rates
'WPDWGR01' POS interface: Download material group master
'WPUBON01' POS interface: Upload sales docs (trnsctns), non-aggregated
'WPUERR01' POS interface: Upload messages SRS/POS/SCS
'WPUFIB01' POS interface: Upload Fin.Acc. interface SRS/POS
'WPUKSR01' POS Interface: Inbound processing cashier data for POS stats
'WPUTAB01' POS interface: Upload day-end closing POS
'WPUUMS01' POS interface: Upload sales data (compressed)
'WPUWBW01' POS interface: Upload goods movements
'WP_EAN01' POS interface: Upload/Download EAN assignments
'WP_PER01' POS interface: Upload/Download person data
'WP_PLU01' POS interface: Upload/Download article master
'WP_PLU02' POS interface: material and condition (inbound and outb.)
'WTADDI01' Additionals
'WVINVE01' Store phy.inv.: phy.inv. docs outbound; count data inbound
'WVINVE02' Store phy.inv.: phy.inv. docs outbound; count data inbound
'W_WGRP01' Distribution of material groups
Regards,
Juan Carlos -
Should we create the same IDOC type and message type?
Hi all, if we want to send an IDOC from one R/3 system to another R/3 system type, should we have to create the IDOC type in one system, then repeate the steps in another system? If we don't have to, what shoud we do?
assuming you want to create a custom IDOC type and not use a standard one, you can create it in one system and then transport it to the other system using normal transport procedure (STMS).
Cheers
Thomas
Maybe you are looking for
-
New SATA drive showing as IDE drive in Bios
Just wanted to hear from some of you guys...not sure if this is right but seems weird for the bios to say my SATA drive is IDE..when its going through bios or if your selecting which drive to boot to first its listed as an IDE drive..could someone pl
-
My aluminum remote does not appear to connect with the Apple TV receiver; I've changed the battery. I can turn on the Apple TV and the opening screen comes up, but the remote doesn't seem to connect...no cursor or movement on the Apple TV screen occ
-
Adobe Acrobat CS6 won't create documents from my scanner
I am using Windows Vista 64-bit based Adobe Acrobat software from my CS 6 Creative Suite. I can view pdf documents using Acrobat CS6 Pro but I cannot seem to create a pdf from my scanner as I have in the past with older Acrobat versions. The scanned
-
MOVED: Riser Card for K8D Master-FT (Rackmount)
This topic has been moved to Server/workstation. Riser Card for K8D Master-FT (Rackmount)
-
Switching from Sony Sonicstage to iTunes
Does anyone know the possibility of switching my 12,000 OpenMG formatted songs into iTunes? I had Sony - now am switching to Apple.