Updating info for multiple songs at the same time?

Is there a way to highlight multiple songs and change info for the songs at the same time without having to do it for each individual song? Example: changing the album or the genre for a batch of songs?
Thanks.

Michael,
You can shift-click to make a continuous selection or command-shift to make a discontinuous selection.
Then choose Get Info from the file menu.
Matt

Similar Messages

Can I run the currency translation for multiple years at the same time?

Dear Friends,
I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
Can I run the currency translation for multiple years at the same time ?
Note: The year is determined from the YEAR property of the "Time" dimension
appreciate any inputs,
thanks

You can run currency translation for multiple years.
I think the problem it is actually related to how you are sending the parameter to currency translation script.
Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
My expectation is that actually the script is called just with first year and that's the problem.
Log of script logic you can find it into:
C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
Regards
Sorin Radulescu

How do i uncheck multiple songs at the same time in my library?

how do i uncheck multiple songs at the same time in my library?

THANKS.
i just figured out that u can highlight them then right click and the option is there

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

Import PST files for multiple users at the same time?

While importing PST files into archive mailboxes, the Exchange 2010 mailbox server went to 100% CPU and memory usage and I could not stop the imports because the EMS stopped responding. We had to restart the whole server to get back to normal.
Not sure if importing PSTs was the cause of it it was a coincidence. We have done imports the same way before without this issue.
How many PST imports can be done at the same time and how do we queue up multiple users and have the mailbox imports have unique names for each user? I noticed they are always called MailboxImport and MailboxImport1 and then it starts over as MailboxImport
again for additional users. So, if more than one user's PSTs are being imported at the same time, we will have multiple identically named imports running.
We would like multiple users' PST imports to queue up and start automatically when the previous users' imports complete.

Please try like this. Rename folder name same as alias. i.e. \\server\share\<alias>. below are examples.
"\\server\share\jsmith"
"\\server\share\tjones"
"\\server\share\rsmith"
"\\server\share\bspears"
"\\server\share\mmouse"
And run below command to take PST from the corresponding
foreach ($i in (Get-Mailbox)) { New-MailboxImportRequest -Mailbox $i -FilePath "\\Server\share\$($i.Alias)\$($i.Alias).pst" -baditemlimit 50 -acceptlargedataloss ;while ((Get-MailboxImportRequest -mailbox $i | ? {$_.Status -eq "Queued" -or $_.Status -eq "InProgress"})) { sleep 180 } }
If a folder missing with the alias you will see an error similar to this.I think this will work for you. You just keep only the required PST folders to import in the "\\Server\share" folder.
"Unable to open PST file '\\server\share\mmouse\mmouse.pst'.
Error details: Could
not find a part of the path '\\server\share\mmouse\mmouse.pst'.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MailboxImportRequest], RemotePermanentException
+ FullyQualifiedErrorId : 27802833,Microsoft.Exchange.Management.RecipientTasks.NewMailboxImportRequest"
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Outlook autocomplete cache stops working for multiple users at the same time

Hi there
Ever since we upgraded our Exchange 2010 to Exchange 2013 we have had problems with the autocomplete cache in Outlook 2010.
We have 700 users and about once per week I get a call about the autocomplete cache. A few users are on cached mode, but most use online mode. The problem appears on both, but it can usually be corrected by /cleanautocompletecache.
Granted, the autocomplete cache gets corrupted sometimes, but it seems to happen a lot for us. I have noticed that often more than one user experiences the problem at the same time, and, since the problem starting after upgrading Exchange, I suspect that
the issue is with Exchange and not Outlook. Yesterday three users complained about the cache at the same time.
I know how to get a broken cache going again - that is not the issue. The issue is keeping this from happening so often.
Anyone out there able to help?
Thanks!
/Anders

Hi ,
Based on my knowledge , when you tried to send an email to a recipient in the same exchange organisation then the recipient address will be resolved in to legacy dn value and then that email will be delivered to destination mailbox by pointing towards to
that legacy dn value.
For the external recipients exchange user the smtp address to get it delivered.
For your issue :
Based upon the NDR message , we need to covert those values in to x500 format and add it to respective recipient mailbox as an x500 address.Then These erorrs will happen if the x500 value of the destination recipient is not available on it's maibox
and that would be the cause of the NDR for most of the times.Some time as you said autocomplete cache would get corrupted on the client end but it is very rare.
How to convert NDR to x500 address format :
http://msexchangeguru.com/2012/03/15/x500/
How to avoid getting such kind of NDR'S :
https://www.simple-talk.com/sysadmin/exchange/exchange-e-mail-addresses-and-the-outlook-address-cache/
In case if you don't want the users to use the autocomplete cache when composing the new emails :
In group policy we can use the office templates to disable the below mentioned option.
1.use autocomplete to suggest the names ---> this option will comes under the advanced settings on the outlook client.
In case if you don't want the users to use the autocomplete cache when composing the new emails as well as if you wanted to delete that autocomplete then you need to choose one more option along with the first one.
1.Empty autocomplete cache.
Please reply me if anyhitng is unclear.
Thanks & Regards S.Nithyanandham

Condition records- setting printer for multiple vendors at the same time

Hi all,
I have maintained condition record for POs for Key combination of Doc type,Purch Org and vendors.Now for a particular doc type and P.Org , I have around 50 vendors. I need to change the printer for all these 50 vendors to 'printerx'.Is it possible? I tried selecting multiple vendors at a time and changed the printer but its not working.

Hi Saurav ,
You can achieve this through SCAT transaction.
For running SCAT take the help of ABAP team.
I hope u might be having the list in the form of text file.
If not , download the same from NACH table.
Regards
Ramesh Ch

Import catalog numbers for multiple BP at the same time

I have to import different groups of the same catalog numbers for multiple business partners. I have been looking through the DTW templates and have not found it yet. Does this functionality exist and if so where would I find it? If not what to do, enter each one by one
thx,
Richard.

Hi,
I just looked at the available templates... I would use the oAlternateCatNum one.
Regards,
Eric

Can i edit multiple songs at the same time but not to the same thing?

i have downloaded a free mixtape and once transferring to iTunes every track on it comes under various artists in the artists section and the name of the artist and song title in the name section of iTunes. I am aware i can change these by selecting 'get info' however i was wandering if the was a way where i can change all of these songs manually, at different times, without haven't to manually select 'get info' before editing every one.

There are editors that bring up the songs one at a time, so you can edit them in a row. Winamp works that way. iTunes does not.

Playlist Add - Multiple Songs at the Same Time

HI,I have gone to Spotify.com and downloaded it to my Macbook and I have tried to do what you say worked for you but it doesn't for me.When I press Control + click I still can't select more than one song to move to the playlist.Maybe I don't understand what the difference is between "the program" you mention and the download of Spotify I did, what I see on my Macbook is my Spotify account with all my music, playlists, etc. that is where I'm trying to do this solution and it doesn't work.Thanks.

Hello MichaelW,
First off thank you for your feedback as it worked as expected. However, I wanted to clarify that your feedback is for the Spotify Program. If a person is using the web play version, as I was, the multiple selection criteria you described does not work. Which I did not know when this question was posted.
Just an FYI, you can also do a select all using CTRL + A, Right Click, then add to the playlist you want.
To download the program go to spotify.com and download it from the main page. The link is right on the middle of the page and you cannot miss it.

Is it possible to specify width in pixels for multiple objects at the same time in Illustrator CS5?

Illustrator has the 'Transform Each' dialog, but it only allows you to scale multiple objects by specifying a percentage. Is there any way to specify the size in pixels?
More specifically, imagine I have 10 rectangles on my canvas, and I want them all to be of a specific height. The rectangle position on the canvas matters, so I can't do the 'vertical align to top and then resize group height' trick - they need to be resized in place.

@Mike: Thank you very much for the quick reply.
Your suggestion does help, but there is still a gap. To be more specific, my rectangles are actually a bar chart, so the heigh of the ractangles is different and should remain unchanged. What I want to do is make each bar narrower to a specific pixel width. The Shape Options feature allows you to specify absolute dimensions, but it seems like you have to specify this for both the Width and Height - can't just do one unless I'm missing something. You can specify relative increase/decrease in pixels (which mostly solves my problem), but I have to calculate the pixel difference, usually fine unless I'm dealing with decimal pixels which I'd like to clean up and turn to clean pixels.
A bit confused about your last point. What does 'select individually' mean? Is Ctrl Enter do anything different from just Enter?

Starting up Enterprise Manager for multiple DBs are the same time

I have a machine with 3 Databases configured, named A, B, and C when I execute "emctl start dbconsole" it only starts for database A which is on port 5500, how do I get emctl to start a listener for all 3 databases that are configured and running?, looking at the emoms.properties, A is on port 5500 and works, B is on port 5501 and C is on port 5502. I do no t care about A as it is an old DB, but B and C are currently in use, however while I can connect to them, I can not get the enterprise manager to start for them. This is all very poorly documented.
Thanks,
ERIC

Trouble Shooting
Go to DB2HOME/network/admin/tnsname.ora
Check sid
suppose sid set abc
Go to DB2HOME/bin
set ORACLE_HOME=<DB2HOME>
set ORACLE_SID=abc
emctl start listener if it throw error (then check any
anti virus software is running on your box if running then stop , issue again lsnrctl start )
emctl start dbconsole
Follow same steps for DB3
Let us know if it work for you

How do you format cell size in numbers for multiple cells at the same time?

How do you format the cell size of multiple cells at once in numbers?

select the cells you want to format by clicking at the top-left most cell, then shift click the bottom-right most cell.
Then open the inspector by selecting the menu item "View > Show Inspector", then click the table inspector segment:
now use the row height and column width fields to adjust as needed.
You can also select multiple rows and columns by clicking in an active tables row/column header, then dragging to select rows (or column), then hover the cursor on the line the separates rows (or columns) until the cursor changes to a bar with arrows, then click, hold, and drag as needed.

How to program for multiple tasks at the same time.

I want to start a data acq, then detect a level change in a switch which also corresponds to a visible timer starting. The timer will stop when one of three switches is closed. In the middle of this I would like for there to be a selectable (controllable/ adjustable) time delay andthen a signal is sent to one of three random lights. Can anyone please assist?

Ok, I took a shot at what I think you are trying to do. The attached VI monitors an analog signal. When the analog signal goes above 5V (could be easily modified for any level), the program pauses for a selectable amount of time, then writes to one of three randomly selected digital lines (the LEDs on my digital lines were reverse logic, so you might have to adjust the polarity). This will at least give you something to work with. Hope this helps!
-Alan A.
Attachments:
analog_in_one_dig_out.vi ‏111 KB

Ability to Edit info for multiple Songs seems missing in iTunes 12

From a review of this forum, it appears that iTunes 12 no longer permits editing of certain fields for multiple songs.
Formerly, one could select any group of songs and, via using Get Info, edit virtually any field for all songs at the same time.
In iTunes 12 this ability seems missing for certain fields.
Am I missing something or is this highly useful feature now gone?
I can't seem to get a clear picture of this from current forum posts.
Thanks for any comments.

marked as solving problem.
did not mean to do that as use of 3rd party scripts should not be necessary for such a core function in itunes
apple need to restore that basic feature. I will submit a request to them directly.

Updating info for multiple songs at the same time?

Similar Messages

Maybe you are looking for