Updating infostructure s883 with date & time through transaction MC94

Hi,
Transaction MC94 is used to update product allocation qty in infostructure s883. Although we also have date & time fields in this infostructure , but this transaction is not updating the same. I am looking for a user-exit or badi or any other way with which i can do so.
Thanks,
Ashish

Hi Ashish!
Sometimes there are exits to extend communication structures for infostructure updates - but in general most tasks can be done in customizing ( + a little coding in formulas).
Have a look at SPRO -> Logistics - General -> Logistics Information System (LIS) -> Logistics Data Warehouse -> Updating -> Updating Definition -> Specific Definition Using Update Rules -> Maintain Update Rules
Here it's possible to define source fields for your dates in the infostructure, but also assign a formula (or subroutine in a program (include)). Especially a formula gives you the chance for a break-point (in update-debugging).
Good luck (because it's an awful lot of settings)!
Christian

Similar Messages

How to copy Log text (with Date, Time stamp ) User IDfrom BP to Transaction

Hi Experts,
Can someone guide us how to copy Log text (with Date ,Time & User ID) fron Business partner (Prospect) to transactions by text detrmination procedure.
Regards,
Basavaraj Patil

save text
Fill out following parameters of SAVE_TEXT function module:
HEADER
TDOBJECT C 10 BUT000
TDNAME C 70 10 digit BP number
TDID C 4 Z001
TDSPRAS C 1 Language
INSERT = X
LINES
TDFORMAT TDLINE
|
|testtttttttttttttttttttttttt( Your text)
I would suggest you to use some other BAPI that would attach your text to BP than SAVE_TEXT.
If you still wanted to use SAVE_TEXT then first make sure how the TDNAME is generated. It depends on the text determination procedure. For examples, it can be guid of BP, GUID followed by date or time or else the BP number itself.
Just go to BP transaction, double click on the text pad, it will open you the SAP Script editor. Click on menu GOTO and select Header which will give you info about your TDID, TDOBJECT, TDNAME....
Hope this helps.

With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?

With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?
With Lion 10.7.1. you where able to drag events from "All Day Events" into the "Reminders" bar to create upcoming reminders.

Exactly the same question I was about to post!
Great being able to sync reminders (well overdue) however if I have to re-type a calener envent into reminders it's a waste of time!!
Come on Apple!!
Just need an option for the calender event to add to reminder or the old drag to add to reminder functionality back, Please???

Output triggred in the invoice with Date/Time 1

Output triggred in the invoice with Date/Time as 1 i e Send with periodically scheduled job.
So could you let me know when this gets triggeed if we maintain 1 in condition record?
Thanks,
Praveen

Hi Praveen,
When you maintain 1in the Date/Time column in the Condition Records for O/P of say the Invoice it means that you are telling the system to send the O/P with periodically scheduled job.
To achieve this you must use the report program RSNAST00.The message is processed through report program RSNAST00. This report program can be scheduled periodically or started manually.
For scheduling periodically you need to set up a batch process in SM35.
Hope this helps,
J Nagesh

Problem with Date & Time Auto Update

Hi everyone,
I have been experiencing a date & time issue with my MacBook Air. (I am running 10.5.5 with all the latest software updates except for iTunes 8). Here's what's going on:
Under the Date & Time preferences, whenever I try to check the box for "Set date & time automatically", the date and time do not update. I thought Norton might be the culprit in this case, but I have thoroughly uninstalled it, and this problem still persists. (I am actually borrowing this laptop for work, so I don't know if someone else possibly did something weird to it before I started using it. As far as I can remember, I've always had this problem -- the automatic setting has never worked.)
I am connected to the internet when I do this, and I already have my time zone selected. Am I missing something obvious here?
I apologize if this issue has been brought up before, but I did a lot of searching and couldn't find anything. Any suggestions would be greatly appreciated!!
Thank you.

whenever I try to check the box for "Set date & time automatically"
You check it and the time does not update, or you try to check it and it doesn't show a little tick mark?
Try it with Console.app open and see does it report any errors. Try changing the time server.
AK

Need to update the actual start date & time of a operation in workorder

Hi Experts,
I need to update the Actual Start date and Actual start time of a Operation of a WorkOrder through a Function Module.
I was looking into the BAPI_ALM_ORDER_MAINTAIN FM, but i couldn't find any field relating to the actual start date and start time of a operation.
Kindly Suggest me which Function module i can use to complete my task.
Thanks in Advance
bye

Hi,
It is system's standard behavior and no other MRP type will help you in moving the start date outside the planning time fence. With MRP type P3 new requirements are covered at the end of the fixing period, the end date is set and planed order is scheduled backword. Hence the start date will lie within the planning time fence.
Rgds,

C903 error with Date & Time

Hi all,
First time posting here.
I have a S.E. C903, which has been great but recently developed a fault with the calender/date & time settings. Basically it wont let me set them to the correct time, wvery time I re-set it, it wont save. Ive tried taking the battery out & leaving it for a while, when I power on asks me to set it but wont save. I've tried resetting to factory defaults with the same results. software version is up to date (1214-617 5R1EA032 090501). Any ideas anyone?
Solved!
Go to Solution.

You can try updating or re-installing the software using the SE update service on your PC.

Problem with Date / Time Title - Showing Inacurate Information

I use iMovie to make videos for my job. The videos need to have an accurate running time and date displayed on them. I use the "Date/Time" Title option and the running time and date appear on the video. BUT- there is a problem. The time is wrong.
When I import a video clip (from my Panasonic HDC-TM80) into iMovie, I can see the "time and date created" as well as the "length" of the video clip. The time and date created shows the time and date of when the clip ENDS. When I overlay the "Date/Time" Title, it starts the time (at the beginning of the clip) from the created time (which is actually the end).
Example:
Clip Created (end of clip): 3/23/11 10:30:00am
Length of clip: 12 min. 35 sec.
The actual Date/Time Title should show 10:17:25am at the beginning and runs through 10:30:00am (the end).
But instead it shows 10:30:00am at the beginning and runs through 10:42:35am. This obviously results in a 12 min. 35 sec. inaccuracy.
Is this a problem with the software? Is there a way to contact someone to alert them of this problem? Or am I missing something simple?
Thanks in advance for anyone's help.
-as a quick fix, I adjusted the time and date on the video clips so that it would show the correct info, but I'm usually working with several clips at a time and it is laborious to change each one.

I don't have an answer but was wondering how you like the TM80? Except for the date/time issue, is it compatible with iMovie'11?
Thanks!

How to compare Date in the TextField or DateTime with Date/Time field?

Hi All,
I am facing an issue with respect Date comparinson. I tried to look into entire discussions but failed to get the answer.
My issue is: I wanted to comparet Date/time field value with Date value which is in TextField.
The functionality of my form is:
I have dropdown list which lists the registered customer ids binded to XML Datasource. On selection of the customer id from the dropdown I am displaying customer registration date in the TextField or say Date/Time field as below code in dropdown change event.
RegistrationDetails.PurchaseEntry.txtRegDate.rawValue = regDataNode.CREATION_DATE.value; (this is TextField control)
In form I have an Date/Time field in which use will select the date of item purchase. In the validation part I want to make sure that, the purchase date selected in Date/Time field must be greater than the Customer Registraiton Date. I able to compare if the customer selects the date from two different Date/Time fields. But how to compare the dates which one is in Date/Time field and Date is in TextField?
I have tried using Num2Date and Date2Num with "YYYY-MM-DD" format to compare but not succeed!
Can you guys help me in this? Thanks in advance
Regards.

Hi,
Yes, I am able to display the date which I have assigned to the text box. In the message box it show the value as '31/05/2009', since in this format i am assigining the date in the text box.
Here is the code which I am assigning the value:
RegistrationDetails.PurchaseEntry.txtRegDate.rawValue = regDataNode.CREATION_DATE.value;
Do I need to change the format while assigning value in text box?
You have told that, you have attached your test form, nothing is the reply. Can you repost the file?
Regards.

Using the regex to match the file name with date time

Hello all,
currently I had problem to match the following file name with the date time. Of course I can use this regex like ""(\\\\w+|.+).(zip)" to match it. However in the current application i need to parse the file name and get the current date time to check if it is matched. Does anyone have good idea?
{code}
testfile10-08-09-2008-08-21-04-24-0443.zip
testfile11-08-09-2008-08-22-04-24-0441.zip
{code}
thanks in advanced!

lauehuang wrote:
Hello all,
currently I had problem to match the following file name with the date time. Of course I can use this regex like ""(\\\\w+|.+).(zip)" to match it.That regex doesn't make a lot of sense:
- with "\\\\w" you probably meant "\\w";
- "\\w+|.+" doesn't make sense: you can simply do ".+" in that case;
- ".(zip)" will also match the string "%zip" or "Ezip".
However in the current application i need to parse the file name and get the current date time to check if it is matched. I don't know what you mean by that.

Creating a spool file with date/time appended to file name

In Oracle Sql*Plus, I want to spool out a file, with the date-time stamp as part of the file name. Any idea how to do this?
Here's what I have right now:
SQL>
set serveroutput on size 200000;
rem
rem $OFSA is a UNIX alias so sql plus is talking to UNIX
rem
spool $OFSA/logs/OFSAP/common_coa_id.log;
prompt 'Enter date in mmddyyyy format, without quotes';
exec upd_common_coa_id_driver ('&date_mmddyyyy');
spool off;
As an example, I'd like to have a file with this name: common_coa_id083002.log
Thanks.

In SQL*Plus this is what you can do to get the current date/time as part of the spool file:
============================================================================================
SQL> column tm new_value file_time noprint
SQL> select to_char(sysdate, 'YYYYMMDD') tm from dual ;
1 row selected.
SQL> prompt &file_time
20020816
SQL> spool C:\Temp\logfile_id&file_time..log
. /* put your code here */
. /* it will go to a file called C:\Temp\logfile_id20020816.log */
SQL> spool off
SQL>

Increment the number with date/time string. when ever the next date come's it should reset again with initial number

i want to store the number of records in a file. Every time when ever i run the program the record will be incremented well i using forloop with count value 1 as a constant .in the for loop i am using autoincrement with the feedback node . to view the number i have attached the indicatator .the number will be increment every time . i am using number to time time stamp that is connected to get date/time string. from that we can view the date string and time string . so , my issue is when ever i close the code again it is coming with intial value . i should get from that number only where ever i close the code . after the date completed again it should come from intial value . i am attaching the code so that u guys can solve my problem.
Attachments:
record.doc ‏34 KB

here you can see.......the file path in case structure in that i have included my requirement of increment the number
-> if the case is true then it goes in ok file path and the no of records string will pass in the file by seeing these code u will get the clarity
my requirement is the number of records should increase ........ whnever the program runs...that i made it. by the next day again it should begain with the intial value.........that is my requirement. i hope u understand .
suggest me how can i use the intial value .......
Attachments:
code.vi ‏35 KB

Updating target table with date in owb using mapping

I want to update the effetive begin date (month begin date) when we load the target table. I have field in target table has Eff_updated_dt defined as DATE.
If I use the Data generator operator and then expression operator (trunc (sysdate,'mm' ) it giving error. It says data generator operator should be connected to flat file .
What other operators can I use to update the column with month begin data.
Also which operator I have use to have sequence key in the table.
Thanks

you can always use a constant for the date field.
just create a constant of type date and give it the value you want, trunc (sysdate,'mm' ) and connect it to your target column, Eff_updated_dt defined.
you have a sequence operator that you can use to link to your "sequence key" as well.
Borkur

Sql command not working with date time??

I am using my own sql query to fetch data in the sql command.
Due to the problem I found - here is the basic example:
The sql is:
select to_number(to_date('10/11/2011 10:23:00','dd/mm/yyyy hh24:mi:ss') - to_date('10/11/2011 10:20:00','dd/mm/yyyy hh24:mi:ss')) minu from dual
But I am not getting anything in Crystal Report tool!!
In any sql tool I get results.
When I am not using time part (hh24:mi:ss) :
select to_number(to_date('10/11/2011','dd/mm/yyyy') - to_date('09/11/2011','dd/mm/yyyy')) minu
from dual
I am getting data!!!!
What is the problem??
Initially I had it with parameters of type 'Date Time'
Please, any one knows what the problem is?

Hi,
Sorry for the delay and thanks for answering.
It was partial solution
Moving to oracle driver, not (OLE DB), this specific one worked fine:
select to_number(to_date('10/11/2011 10:23:00','dd/mm/yyyy hh24:mi:ss') - to_date('10/11/2011 10:20:00','dd/mm/yyyy hh24:mi:ss'))*100 minu from dual
BUT
When I tried to change one of the hardcoded values to be parameter of type 'Date Time' I couldn't pass the validation step - mostly the errors:
"ORA 00900 Invalid sql statment" and
"ORA - 00907: Missing right parnthesis"
No matter which format I used.
Last version is:
select to_date('{?tsStartReport}','yyyy-mm-dd hh24:mi:ss') from dual
Any idea why 'Date Time; is so problematic? How can I workaround it?

Document signature with date/time received stamp

Does anyone know if you can combine the feature of a date/time received stamp with the signature of the person who received it?
Regards,
Sean

Hi Sean,
The way a time stamp works is that it's a signature over the document signature, kind of like when a notary public signs a document. They (the notary) are not verifying the accuracy of the document, only that you signed it and when you signed it.
Generally (can you sense that this is going to get more complicated then it should be ), a time stamp is created (by a trusted third party) at signing time to prove that the signature existed a a particular point in time. If you timestamp your signature at signing time it cannot be time stamped again by the receiving party. If the receiving party wants to add a timestamp they need to sign the document themselves. An example of this is the patent office. It doesn't matter to them what time you signed the patent application, but rather when they received it. They add their own timestamp to show what time the application was received by signing the document a second time.
Now just to confuse things a bit, starting with Acrobat 9.1.0, if the signature was not time stamped at signing time, it has the ability to add a timestamp post signing. You can add the timestamp by opening the Signature Panel, right mouse click on the signature, and select Add Verification Information from the pop-up menu. You must have a timestamp server configured in the Security Settings console and the Include signature's revocation status when signing preference selected in order for this feature to be available, and the signature must be valid. You cannot add a timestamp post signing over an invalid signature.
I hope this helps,
Steve

Updating infostructure s883 with date & time through transaction MC94

Similar Messages

Maybe you are looking for