Updating ipad 2 to io6 using wifi

Im selling my iPad 2 (getting the new generation  iPad 4) to a friend who doesn't have a computer or notebook , although he has internet service at home which he use basically for phone service. I was wondering if he can update the iPad 2 to io6 using wifi, since I will be handing over the iPad 2 into its original factory set up (after a full erase)   .
Thanks in advance for any input.

Hi Davonex,
Thanks for  your prompt .another concern is that when i hand  over the ipad2 in its original factory setting it wont have the io5 software yet...how can he update this without a computer. I know the io6 can be updated via wifi but what about the ios5 ? I can connect this to my own computer but it would download all my back up to the ipad im selling, which is not ideal.
Can you please clarify.
Thanks again

Similar Messages

  • Ipad Mini - Can I use wifi without sim card?

    I'm thinking about buying Ipad Mini but I don't know if I can use my home wifi connection without a sim card. Should I buy it too?
    How can I use Ipad Mini without a sim card? What can I do without it?

    The Sim Card is only necessary if you plan on using a Cellular connection.  In fact if you buy a Wifi only iPad it doesn't even have a slot for a sim card because it has no cellular capabilities.
    The Sim card is used to connect a cellular carrier's network (like a mobile/cell phone would) to access the internet anywhere there is cell coverage without the need for a Wifi network being close by.

  • How do I add my Ipad to my homegroup using WiFi ?

    Synced my new ipad to itunes using the cable supplied. Also linked the device up to my existing wifi router with no problems and can surf the net and e-mail OK! Wanted to use the homesharing option to acess my itunes library on my desktop without transferring it all to my Ipad. However when I tried to add the pad as a wifi device to my home network my PC cannot find it. Am I missing a step here? I am running w7 home premium. Tried turning blutooth visabiliy on to no avail.

    Ok I am going to need to remember to search communities better before I ask. Found the link_Easy!!
    https://supportprofile.apple.com/MySupportProfile.do

  • HT5704 After downloading and installing this on an iPad mini cannot connect using wifi

    Did anyone experience this after installing the update

    try reseting your newtowrk settings, go to settings, general, reset, reset network settings.

  • Why my ipad 4th gen doesnt update apps using wifi connection instead works on 3G?

    MY ipad 4th gen is updating apps only using 3g connection whereas my wifi is working fine with chrome and other softwares, but it doesnt update softwares using wifi connection whic. Is unlimited data for me.

    The WiFi only iPad does not have a GPS chip and does location through WiFi routers. Tethering to your iPhone will allow you to use the GPS chip on it and utilize Apple and Google Maps.

  • HT4972 How do i update my ipad 2 to ios 6 using wifi

    How do i update my ipad2 to ios6 from ios4.3 using wifi?

    You will only be able to upgrade to 7.0. Upgrading will require iTunes.

  • I can not send email from my iPad .  Have been using it for over a year, all of a sudden I can only receive email.  I have a wifi connection in my home and have a A T &T cellular data plan?

    I can not send email from my iPad .  Have been using it for over a year, all of a sudden I can only receive email.  I have a wifi connection in my home and have a A T &T cellular data plan?

    I have a 1st gen iPhone that I just updated the software to 2.0.2
    Now whenever I press the mail icon it goes to the mail app for about 4 seconds, does nothing, no loading of folders, old messages, nothing.
    Then it reverts back to the home screen. Tried restarting, haven't tried restoring, thought I'd look here first.
    Anyone???

  • HT204291 My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi.  The iPad displays AirPlay set to TV with the Mirroring On (green).  My iPad IOS software is 8.2 and my Apple TV software is at 7.1.  The TV displays the Apple

    My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi.  The iPad displays AirPlay set to TV with the Mirroring On (green).
    My iPad IOS software is 8.2 and my Apple TV software is at 7.1.  The TV displays the Apple Menu.  The “Settings” does however displays the General menu allowing me to see:
    Apple software:          7.1 (7003)
    Apple TV:                   Model No. A1464, Part No. MD199B/A
    Signal Strength shows 5 circles.
    It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video.  I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2.  Can you help please?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

    I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

    I'm having similar issues with my phone.  I got my first iPhone recently, only had an iPod touch gen4 for a little over a year.  Updated to 6.0.2 when we got the phone (iPhone 5) a few days before Christmas.  When I got home on the evening of January 11, my phone would not connect the router anymore.  I was able to get it to connect after resetting the phone and the router, updating the router, and manually connecting.  That laste for a few minutes and then wouldn't work anymore.   I live in an area with very limited service, we have a network extender installed to help, and I am barely getting a 3G signal at times.
    My wife's iPad 4, my touchiPod 4, and all of our laptops are working just fine on the router.  When I dropped my kid off at school today, I noticed that I am not even seeing the school network anymore from the parking lot where before I got 3 or 4 bars and could connect to their wifi when I was there.  Today my phone goes back and forth between seeing my home network but not connecting, to not even seeing the network at all even from the same room that the router is in.
    Hope Apple fixes this problem soon..............

  • My wifi hotspot on my iPad can't be used. Does it have something to do with the device?

    I try to use my iPad hotspot on my android device. I managed to connect to it once using wifi hotspot. And now, everytime I try to reconnect. It won't work.

    1: Backup your user files folders of Documents, Music, Pictures etc., to a external powered drive (not TimeMachine) and disconnect.
    2: Insert the 10.6 installer disk and reboot holding c
    3: Simply reinstall OS X without erasing the drive, it will overwrite the installed version of OS X and the root level software, but leave your Applications folder contents (expect Apple bundled programs) and user files alone. (but backup anyway in case it fails)
    4: Reboot and the Integro is gone out of your system, but there may still be something laying around in Applicaitons to delete. Use Software Update to get up to date.
    5: You don't need anti-virus on a Mac, Apple provides it already for you sight unseen.
    6: If you Software update, the bad certificate issues are pulled, thus are not a threat.

  • 4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes on for a while and goes off in a few minutes The phone is unable to scan networks available for use

    4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes ON for a while and goes off in a few minutes The phone is unable to scan networks available for use
    Am having ipad2, ipad mini and iphone 4 with family of two persons. One hp laptop and a DELL professional computer also in operation
    Myself an engineer for projects
    Looks the company apple cannot grow if they do not support solving the problems of their existing customers
    Ashok Dhingra
    India

    You are not addressing Apple here. If you have a problem, describe it and someone might be able to help. Just to be sure, the wi-fi on the phone will go off after the phone goes into sleep mode unless it is actively being used. This is a battery saving measure. If you are actively using the internet, and the phone is still awake, then the wi-fi should remain connected.
    What troubleshooting steps have you tried.

  • HT6058 I need to update my iPad and dere is no wifi in range what can I do about it

    I need to update my iPad and dere is no wifi in range

    There are two ways to update - via wifi or connect the iPad to a computer and use iTunes.
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
        1.    Go into the iPad's Settings.
        2.    Locate and tap "General" from the menu on the left.
        3.    The second option from the top is "Software Update". Tap this to move into the update settings.
        4.    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
        5.    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
        1.    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
        2.    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
        3.    After canceling the dialog box, iTunes should automatically sync with your iPad.
        4.    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
        5.    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
        6.    From the iPad screen, click on the Update button.
        7.    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
        8.    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • Hi i have an ipad 1 32gb and now i cant use wifi

    Hi i have an ipad 1 32gb and i just updated it and now i cant use my wifi and i dont have a carrier and i dont want a carrier so can someone plz tell me *** is up with this i need the wifi i have restored ad reset eveything and i cant figure it out

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Apple iPad 2nd Gen 16GB WHITE WIFI , Did a update,  Now it is stuck in I-Tunes Restore Mode. Do you no how to fix? Going crazy. Ran fine before that.

    Apple iPad 2nd Gen 16GB WHITE WIFI , Did a update,  Now it is stuck in I-Tunes Restore Mode. Do you no how to fix? Going crazy. Ran fine before that

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • HT1349 I'm having problems downloading apps to my iPad using wifi at a McDonalds.  The apps all stay in a"waiting" mode.  I can't delete them or get them to install.  This is the second time that this has happened.  Advice?

    I am having problems downloading apps while using wifi in a public setting.  The apps will show up on my screen and say "waiting".  They will not install.  I can't even delete them from my screen.  This has happened before and I had to reset my iPad to factory settings.  I hope I don't have to do this again.  Any advice?

    Well, typically one of the fixes that I would suggest is to try to delete the waiting icons. WIFi in a public places like McDonalds, Starbucks, B&N, etc. is not the greatest and I would avoid those places for downloading and updating apps. But I do realize that not everybody has access to Wifi in their homes.
    These are all things that have worked at one time or another for other users. Hopefull one of them will work for you. Just ignore whatever does not apply or anything that you have already tried.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
    If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

Maybe you are looking for

  • This file does not appear to be a photoshop file error.

    Hello, I know this has been covered a few times already, but none of the previous threads about it were able to help my situation. Ok so here is what i did: Exported a JPEG from a timeline in FCP. Brought that JPEG into PS (i am using CS3), and chang

  • How to return an error message from a zbapi that I have written

    Hello Friends I have written a simple ZBAPI that I have created. Here is the simple code that I have written which just inserts some value. How can I send information back using BAPIRETURN if the insertion was not successfull. Is it enough just to de

  • Cannot find file when importing

    I have always imported my pic. files the same way and one day this window just popped up. I can still preview all pics before import. I am importing from iPhoto on my MACbook pro. also tried to import from SD card, still same thing. also updated and

  • Oracle 10g on Windows 7: TNS-12535: TNS:operation timed out

    I installed Oracle 10g (Version 10.2.0) on Windows 7 Professional on my laptop. Everything installed cleanly, but I simply cannot get an Oracle-client communication going. For some reason, TNSPing keeps timing out, as follows: C:\Users\Bruce>tnsping

  • Which type of HDMI cable?

    i have Hp  pavillion dv6-6121tx laptop and i want it to connect with my TV through HDMI cable.Which type of cable should i buy 1.3B or 1.4B or they just don't matter?please tell me