Updating iPod After Software Update

Howdy,
Bit of a problem here. All of the software was updated last night and my iPod has been updated, yet it now says I need to plug it in to the standard electricity supply for it to update, but I don't have that plug. So, I can't use my iPod
Anything I can do to stop this or bypass it? I've only got the USB cable still
Cheers

When updating or restoring the iPod via a usb connection, it needs to be plugged into power via the charger to complete the process, and this is why you see that icon displayed.
You may be able to complete the process via a car charger, or via a powered firewire port on the computer (with the required 6 pin cable of course) if you have access to either of those. Or maybe visit an Apple store if one is nearby.
Or you can try this.
http://www.bearsdriving.com/blog/archives/2005/10/youripod_tipo.html
I make no claims as to whether this will work, but merely point it out.
Other than that, your iPod cannot be used until you complete this process.

Similar Messages

  • Itunes won't update IPOD after running Updater

    I should have known to leave things alone!
    Updated Itunes and ran updater. Have a 15gb IPOD m9460ll.
    Now everytime I connect the IPOD it runs the wizard asking me to name the ipod and then it looks like it runs and the songs look like they are there, but they are not on the ipod. Update says complete.
    I've uninstalled and re-installed itunes, reset the ipod.
    Anybody have any ideas?

    Figured it out!
    The updater had assigned a drive letter that was already in use as a network drive. I went into disk management and re-assigned the IPOD to a different drive letter.
    Works now. Hey Apple!, check for an available drive letter before you assign it.

  • Artists not showing in iPod after software update.

    Need help...After updating the software in a 5G Video iPod, songs successfully transferred, but the artists for those songs do not show up? Example, I transferred U2's Vertigo over where Vertigo listed and played in Songs, but U2 did not show up under Artist in the iPod? Has anyone else experienced this problem and found a solution?
    Dell Dimension 8300   Windows XP  
    Dell Dimension 8300   Windows XP  

    Try looking/posting here.
    Microsoft Support – Office for Mac
    Microsoft Support – Office for Mac (2)

  • Unable to update apps after software update

    If I try to update my apps or download new one I get, : unable to download app, (app) could not ne downloaded at this time"
    I didnt have this issue until after the sodtware update.
    thank you

    Hello archerobx
    If you are having issues with the App Store, the article below will assist with making sure that you can access both the iTunes and App Store with updates and purchases.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Ipod touch4g  is not detected in pc and itunes after software update

    after software update is done. when i connect my ipod touch it is not detected in pc (windows 7) and in itunes please help me anyone.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • After software update, I can see the songs on iPod nano in iTunes, but I cannot play/move the songs from iTunes.

    After software update, I can see the songs on iPod nano in iTunes, but I cannot play/move the songs from iTunes.

    Is the "software update" for iTunes 12?  Or something you did to the iPod?

  • My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My phone is still disabled after software update and i cannot seem to reset my passcode someone help me

    my phone is still disabled after software update and i cannot seem to reset my passcode someone please help

    Does the Ipod see the network?
    It sure sound like the drop cause some other internal damage like breaking/loosening the connection to the  antenna. See:
    http://www.ifixit.com/Teardown/iPod-Touch-4th-Generation-Teardown/3562/3

  • HT1414 I can't restore my iPod after proper update!What should I do?

    I can't restore my iPod after proper update!It suddenly froze while updating. Now it is in restore mode and every time I try to restore it, it failes!Also bear in mind  that I have no backups of earlier versions of my iPod in my pc, since I formated it a few days ago.Thanks for your time!

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • I was halfway thru updating ipod touch software, got error 1602

    I was halfway thru updating ipod touch software, i walked away from computer and when i came back there was an error "1602" and a picture on my ipod (requesting to connect to itunes?) but WILL NOT WORK AT ALL!
    What's going on?  Seems like a lot of people are having similar problems all at the same time.

    From the article cited at the end of my post:
    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the USB 30-pin dock-connector cable. If the issue persists on a known-good computer, the device may need service.
    http://support.apple.com/kb/TS1275

  • HT1483 I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is wor

    I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is working. Was thre a change in the internet address for NANO software updates? Do I have to reconfigure something in Itunes to point to the correct address?

    What version of iTunes are you using?  The latest is 10.6.3. In iTunes, choose Help -> About iTunes to check the version number. If it's lower than 10.6.3, download the latest version from here.
    B-rock

  • New iPad with retina display with 30 pin connector mirroring to TV with dvi adapter problems after software update

    Hi. Good day to everyone my New iPad with retina display 30 pin connector will not mirror to TV even with divi adapter after software update. Adapter works fine. Or is it a software glitch with IOS 7.04? I've tried resetting and reconnecting nothing seems to work.

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • Macbook Pro 7.1 not booting up after Software update

    Hello everyone,
    I have a problem, but first some context?
    I recently got my mom's old Macbook Pro(7.1) with Intel's 2.4 Ghz C2D and Nvidia 320M graphics. A small upgrade from my 2009 MBP(5.5) but is in much better shape than my old machine. In that unit(5.5) I used a 40 GB SSD as a boot drive and a 640 GB Platter drive for general storage, and removed the optical drive, as I did not use it very often.
    Well, now I transplanted both drives into the 7.1 MBP, but the system will get stuck at the grey screen. I then proceeded to backup all my data, and wipe both drives multiple times and tried to installs on a clean system.
    I replaced the aftermarket ram I had with the factory sticks, put the factory drive and the Super Drive back in. Loaded up Snow Leopard via DVD on an empty drive.
    It boots and runs just fine. So I put in the SSD to try it out. It loads OSX Snow Leopard just fine again. I go do a software update to 10.6.8, and on reboot to finalize, I get stuck again at the grey screen. The progress wheel freezes, and I am stuck until I do a forced shut-down.
    Safe mode gets me nowhere, AHT does not work, Verbose mode freezes after 10 seconds or so and I have also reset the SMC and the NV/PRAM multiple times.
    I am at a loss. I have a nearly pristine MBP that for some odd reason will not work for me in the slightest, despite my best efforts at attempting to diagnose the problem.
    Note that all componenents that I listed,(SSD, Larger HDD, Upgraded Ram etc.) All worked flawlessly in my previous MacBook Pro.
    Does one hardware generation make that much of a difference for an OS and for upgrades that clearly work in other Apple devices?

    darkrider92,
    I have the same model MacBook Pro as the one that you got from your mom. Were you able to install the 10.6.8 update successfully onto the factory drive? Were you using the factory RAM when you tried to install the 10.6.8 update on the SSD?
    Have you checked  the Web site of the SSD’s manufacturer, to see if there’s a firmware update available for the SSD?
    You can download the 10.6.8 update outside of Software Update from Apple here; in case you need to try to install this update several times, running it from your local disk would be more convenient than waiting for it to download again.

  • IPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines

    iPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines.
    I found a video on youtube with similar issues - http://youtu.be/Xuuqxx18-bA
    EVERYTHING HAS BEEN TRIED: Restore, Reboot, Recycle, Replacing Cables, etc....
    I don't have Apple Care, what to do? Spend more money and buy a new phone?

    Here is another person who has a problem with the iPhone 5 screen https://www.youtube.com/watch?v=sc1ZPWSA8dc and they have just received them NEW!!!!!
    I myself, two days ago purchased a  2nd hand iPhone 5 that was advertised as having a line of squares at the bottom of the screen. I Googled it and found people saying it was a screen issue and to replace the screen, so I did this and it is still happening with a new screen.
    I am starting to dislike Apple intensely after reading forum posts and watching videos where people are asking for help and telling us about issues that they are having with their phones.
    Why is Apple getting it so wrong with their updates and manufacturing that they are completely destroying iPhones that cost a lot of money and then expecting the owner to purchase another phone unless they are still in warranty.
    Apple you should be going out of your way to put things right for people but instead there is a wall of silence over so many of the issues destroying peoples phones.
    SHAME ON YOU!

  • Thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve this or is it a permanent pixel problem?

    Sudden thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve or is it permanent pixel problem?

    Try PRAM reset.
    Reset PRAM:   http://support.apple.com/kb/PH14222
    Best.

Maybe you are looking for

  • Invalid element 'servlet' in content of 'web-app', expected elements [.....

    I'm receiving the following error when I build a web app. Invalid element 'servlet' in content of 'web-app', expected elements [..... I have been trying to configure cactus struts testing as described here: http://jakarta.apache.org/cactus/integratio

  • Language of Adobe Reader 9

    Hi everyone, I am using adobe Reader 9.0 and Tabs in toolbar are in Japanese. I cannot understand them. Please tell me about changing it to English. Thanks so much for your kind helps. Duy

  • Configure HRFORMS to call a custom Smartform.

    Hello All- We have a custom Payroll Form created in PE51 and we have a custom smartform which uses this custom payroll form. By using TCode HRFORMS can we configure to call a custom smartform. If so can you please let me know how? Or do you have a do

  • Edit Original fails to open image in Photoshop

    For some unknown reason, when using the Edit Original function in InDesign, it will open Photoshop but then fails to open the image. Same results when using Edit with. Will work with Preview and Acrobat. Any solutions? CS4 on Mac OSX 10.6

  • Flash player starts and stops

    When I try to listen to a online video my flash player keeps starting and stopping.  It sure is anoying.