Updating IPS sig using Cisco Works LMS 2.5
I'm a new and novice user of Cisoworks
I have been navigating through the package for two days now and have discoved how powerful the tools are
Can some direct me to the area to udpate a Sig of an IPS I believe that it may be in the Software Mangement section of RME
Yesterday Cisco announced a new tool for managing IPS sensors at smaller sites (less than 5 sensors).
The Cisco IPS Manager Express (IME):
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5729/ps5715/ps9610/data_sheet_c78-459033_ps4077_Products_Data_Sheet.html
IME is the next generation of IEV. It is designed for small deployments of up to 5 sensors. It can do event monitoring and reporting (it can do the Top 10 Attacker, and Top 10 Signature reports you asked about).
But new in IME it can also do configuration when managing IPS version 6.1 sensors.
IME and IPS version 6.1 are not yet available. Both are in the final stages of testing.
Both should be available in the next month or 2.
IME (just like IEV) is available at no additional cost for users with active Cisco Service for IPS contracts for their sensors.
NOTE: The same contract also includes entitlement to the IPS 6.1 version, as well as the Signature Update License. If your signature license is up to date, then your contract is up to date and you are entitled to both IME and IPS 6.1.
For small deployments of 5 sensors or less we currently recommend using IEV 5.2 for monitoring and IDM for configuration.
With the release of IME we would recommend IME for both monitoring and configuration.
NOTE: IME can be used to monitor the new IPS 6.1 sensors, but can also be used for monitoring the older 6.0 and 5.1 sensors as well. When using IPS 6.1 you could choose between IME or IDM for configuration. But if using IPS 6.0 or 5.1, then configuration would still be done through IDM.
For larger sensor deployments of 6 or more sensors, then CSM is recommended for configuraiton, and CS MARS is recommended for monitoring.
Similar Messages
-
Hi,
I am using Cisco works LMS 3.1 with HUM 1.1.0. I am receiving thresold and job schedule mail alert from HUM.
It is showing error in JOB history “Not able to connect the mail server” while alerts from RME,IPM,CS,DFM are coming on mail.
I have Configured HUM just 3 days back and all others application had been configure 4 months back.
Please help.
Regards,
DJHi Clarke,
Thanks for response. Please see the attached HUM smtp error. I have tried the HUM JOB with sniffer to filter smtp port 25 traffic but nothing is reflecting
in sniffer when trying to send mail through HUM while DFM,RME IPM mail are showing in sniffer and we are getting mail as well.
I have upgraded HUM version from 1.1.0 to 1.1.2 but the error is same.
Regards,
Dinesh Joshi -
Need to do switches configuration archive using the cisco works LMS 3.2
Hi folks,
We have a cisco works LMS 3.2 bundle which contains Resource Manager Essentials 4.3.0 . I am trying to do config archive of all our network switches using RME. I have no idea how to do it . so i came here ...
Guide me what are the things to be done in both switch side and RME side.Hi Mohammed,
You can do this from here :
RME > Admin > Config Mgmt > Archive Mgmt
check the below linlk for more information:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.3/user/guide/config.html#wp1070778
Thanks-
Afroz
[Do rate the useful post] -
Update IOS using Cisco Prime LMS 4.1
Hello everybody,
I have 10 switches 2960 and would like to uptade its IOS using Cisco Prime LMS 4.1.
How can I make that?
Thanks for all.Hi,
Kindly check the below link :
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.0/user/guide/configuration_management/swmgt.html#wp1369360
i hope this will help..
Thanks
Afroj -
Hi All,
Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
Any help would be greatly appreciated.
Thanks in advance.
SamirMake sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices. RME will only use HTTPS to fetch VPN concentrator configurations.
-
Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router
Hi All,
We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
Any help would be appriciated.
Thanks in advance
SamirHi,
*** Device Details for d0151-100 ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,HTTPS
Execution Result:
Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
This is the error while doing syn archieve.
I am not sure about Rtr7000 version but we have latest Rtr7000.
Waiting for your kind reply.
Samir -
Cisco Works LMS 3.1 Integration with ACS v5.2
Hello Experts,
our customer has a working integration with the Cisco Works LMS 3.1 and an ACS v3.3 as it is described in this document:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_white_paper0900aecd80613f62.html
Now we are changing the old ACS Servers to the new ACS v5.2 platform. Is it possible to integrate the LMS to the new ACS Server? We want to use a granular user access restriction for SuperAdmins, Hotline Users an so on...
Thanks,
FlorianHi Florian,
actually the ACS 5.2 is not supported in CS 3.2
here is a list of the supported ACS servers under LMS 3.1
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.2/user/guide/admin.html#wp865998 -
Cisco Work (LMS 2.6) Device Configuration
Hi,
Can anyone tell me where is the default location of device configuration ( Running conf ) saved in Cisco Work (LMS 2.6) Server.
Thanks & Regds,
Lalitif you enable the so called shadow directory feature under: Admin -> Config Mgmt -> Archive Mgmt -> Archive Settings
then the defaut location is \CSCOpx\files\rme\dcma
Cheers,
Michel -
Cisco works LMS 4.0 ,Apache HTTP Server CVE-2011-3192 Denial Of Service Vulnerability
Cisco works LMS 4.0 ,Apache HTTP Server CVE-2011-3192 Denial Of Service Vulnerability
This vulnerability has been fixed in release apache 2.2.20 and further corrected
in 2.2.21. You are advised to upgrade to version 2.2.21 (or newer) or the
legacy 2.0.65 release,
Can any one give the steps to upgrade the apache http server 2.2.10 to 2.2.21 in windows 2008 server?For the following PSIRT:
http://www.cisco.com/en/US/products/csa/cisco-sa-20110830-apache.html
Download the following patch "lms40-win-Oct2011-su1-0.zip" :
http://www.cisco.com/cisco/software/release.html?mdfid=283434800&flowid=19062&softwareid=280775103&os=Windows&release=4.0&relind=AVAILABLE&rellifecycle=&reltype=latest
The instructions should be in the zip file how to install the patch.
This should cover all theses bugs that you can query in the bug tool kit:
http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
CSCte45565
CSCto12712
CSCto23584
CSCto23622
CSCto35544
CSCto35577
CSCtq48990 -
Can you monitor Mitel IP Tel on a Cisco router and switching environment? Customer has Mitel Voice but Cisco routers and switches. Will Cisco Works LMS provide functionality?
See this page for a list of LMS white papers:
http://www.cisco.com/en/US/products/sw/cscowork/ps2425/prod_white_papers_list.html
You should fine some deployment guides for each of the various versions. Those will help get you started. -
Cisco Works LMS R3.1 with ACS R5.1
I search on internet about the AAA integration between LMS R3.1 y ACS R5.1, and all the information that I found it's related to ACS R4.1. It's possible to integrate with ACS R5.1.
Regards and thanks in advanced
Luis MartinezNael,
Sorry to batter you, but I was trying to migrate my Cisco Works LMS R3.1 to R3.2 and from the support page of CISCO I just can donwload the following version LMS R3.2.1 (LMS R3.2 service pack 1). I tried to install that version but i got an error that saids "LMS R3.2.1 needs LMS R3.2 installed on the server"
Could you please tell me where can I download the complete and initial LMS R3.2.
Thanks in advanced for your kindly help.
Luis Martinez -
Logging for changing device configuration using cisco prime LMS / PI
Dear All,
How to see / set for
for changing device configuration (routers, switches) using cisco prime LMS / PI ?
and, how to see network topology diagram using PI / LMS?
Thanks,
Jerrianyone can help. thanks.
-
System Requeriments Cisco Works LMS 2.5
Hi
I need to know if the Cisco Works LMS 2.5 can be instaled in a Windows 2003 Server whith Service Pack 2 or i need to work whithout the SP2
Thank?sLMS 2.5.1 is supported with windows server 2003 SP1or later
http://www.cisco.com/en/US/products/sw/cscowork/ps2425/products_upgrade_guides_chapter09186a00805af1dc.html#wp1032750 -
Cisco Works LMS 4.0 doesn´t start
Hello All
i have big trouble with me LMS 4.0 installation. I did an Upgrade from LMS 3.2 to LMS 4.0. After that the Works was running without any problems. After some days i´d tried to login on the LMS and it told me something like my lincens where corrupt or so. I´d tried to start the CiscoWorks Demon Manger but he didn´t start. OK after some investigation at the i-net i decided to perform a clean installation of the Server an Cisco Works.
So after i do thes i´d perform a restore of my old Data from LMS 3.2. Now i investicated that my ANI Server Falied to start. OK than i tried to restart the Works Demon ... f... and what will happend ?!?!?! The demon doesn´t start. Can someone help me ?!?! Please i will not perform a new istallation again.
C:\Windows\system32>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Thanks
Mario
Hi i have an update for this issues ... After i´d tried to start all Works- Services be hand ... all Services will start execpt the deamon ... When i loged in i get messages "License Server/Deamon Manager is down. Please check license.log for more information."
Thats the same situtaion befor the new installation.Hi Afroj
i´d just have an update for you and maybe for Martin. I´d checked the services and investigate that the ANIDatabase Engine
was not stoped. After i stoped the service "by Hand". I tried to reinalize the Database and see ... IT WORKS ...
D:\CiscoWorks\CSCOpx\bin>perl.exe dbRestoreOrig.pl dsn=ani dmprefix=ANI
WARNING: Existing contents of ani database will be lost.
Do you want to continue [y/n]?y
INFO: Starting the DataBase
Starting database engine aniEng
INFO: Process created
INFO: Started the Database engine : aniEng Retry 0
INFO: Started the Database engine : aniEng Retry 1
INFO: Started the Database engine : aniEng Retry 2
INFO: Started the Database engine : aniEng Retry 3
INFO: Started the Database engine : aniEng Retry 4
INFO: Started the Database engine : aniEng Retry 5
INFO: Started the Database engine : aniEng Retry 6
INFO: Started the Database engine : aniEng Retry 7
INFO: Started the Database engine : aniEng Retry 8
INFO: Started the Database engine : aniEng Retry 9
INFO: Getting message
INFO: Connect the database dsn=ani
INFO: Connected the Database
INFO: Command Executed
INFO: Connecting the Database ani
INFO: Company=Cisco Systems;Application=NMTG;Signature=010fa55157edb8e14d818eb4f
e3db41447146f1571g32125eb777a87cbf8b29a954f559d4221b792ff8
INFO: Preparing AUTH cmd
INFO: AUTH Executed
INFO: AUTH cmd finished
INFO: Stopping the Database engine ani
Stopping database engine aniEng
INFO: File not exists.SQL Anywhere Command File Hiding Utility Version 10.0.1.40
51
INFO: Database [ani] authenticated successfully.
ani database initialization is completed.
D:\CiscoWorks\CSCOpx\bin>
D:\CiscoWorks\CSCOpx\bin>pdshow ANIServer
Process= ANIServer
State = Running with busy flag set
Pid = 11136
RC = 0
Signo = 0
Start = 8/22/2011 1:01:29 PM
Stop = Not applicable
Core = Not applicable
Info = ANIServer started.
Many Thanks for your help ...
Regards
Mario -
Cisco ASA go Out of Sync through Cisco works LMS 2.6
Cisco works startup/running Out of Sync on Cisco ASA.
Hi,
The problem description is a bit sparse. However it is important to note that the last day for support on LMS 2.6 was June 30, 2011.
Here is a link to the End of Life announcement.
Maybe you are looking for
-
I tunes is not working. when i go to update apps nothing happens go to itunes page is blank
itunes not working. when i go to update apps nothing happens. if i go to itunes store page is blank and does not go to the store
-
File to IDoc Scenario exception handling
I have configured Time bound File to IDoc scenario with processing mode in Sender adapter as 'Delete'. And it is running perfectly. I am trying to add additional functionality to the scenario, i.e.,if a file does not exist on the ftp server, a mail s
-
HT1386 iPhone sync not working.
When I create a playlist on my computer, it does not appear on my iPhone after I sync it. What do I need to do so that I can transfer the playlist from iTunes on my computer to my phone?
-
Java / Linux - why ??? instead of non-ascii symbols
Hi All, I've run into the problem during creating a new file from Java program on Linux gentoo. All non-ascii characters in the file name are converted into ??? symbols. I've tried to run the program with -Dfile.encoding=UTF-8 -Dsun.jnu.encoding=UTF-
-
HI, I'm trying, for the first time, to use the DB componnents of TS(3.0). I have successfuly accomplished Open DB to my own DB containing a table CARD_RSLTS. I have successfuly accomplished openSQL statement as follow: "SELECT CARD_RSLTS.SERIAL, CARD